Products are listed alphabetically.

Page 1 of 1

1. ACRYLIC HANDICAPPED SHOWER STALL (MODELS S6036 BF & S4848 BF) ---DISCONTINUED. (VERIFIED 3/18/96) RETAINED IN DATABASE FOR REFERENCE.--- One piece acrylic shower stall. No threshold. Built in grab bars. Curtain rod. Options available: folding or molded seats, curtain hooks, drain, seat belt, dome light, hand set shower, flexible hose, pressure balance valve, dial thermometer. Dimensions: 3 by 5 feet or 4 by 4 feet....[More Information]
   
   
2. BATHMASTER BARRIER FREE SERIES BARRIER FREE BASES --- DISCONTINUED. (Verified 10/2003) RETAINED IN DATABASE FOR REFERENCE. --- Tub-Master's Bath-Master Series Barrier Free Shower Bases are designed to provide people with mobility and balance disabilities barrier free access to showers. These bases fit Tub-Master's bottom tracks (see separate entry) and are available in acrylic or fiberglass. The acrylic bases are reinforced with fiberglass, and the fiberglass bases are gel-coated and reinforced with fiberglass. Each unit has a 3.25-inch, polish...[More Information]
   
   
3. BATHROOM GEM SHOWER --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. --- The Bathroom Gem is a roll-in shower unit designed to replace a standard bathtub and provide an accessible 3 x 5 foot roll-in shower area. The unit features a non-skid surface and fiberglass construction. Manufacturer suggests that no major structural modifications are necessary to install the shower. It may be installed to match existing ceramic tile, or complimented by an optional matching surround already reinforced f...[More Information]
   
   
4. EASY ACCESS SHOWER STALL ---DISCONTINUED. (Verified 11/2000) RETAINED IN DATABASE FOR REFERENCE. ---The Easy Access Shower Stall is designed to offer barrier free shower access for individuals with mobility disabilities. This thermoplastic unit features tool-free assembly and total front installation. It's size was spcifically designed to fit into the same space as a standard five foot bathtub. The unit is available in a choice of four or seven piece kits; with each piece designed to lock in place. The leak proof seams ...[More Information]
   
   
5. FIBERSHEEN ROLL IN SHOWER (MODEL 3837-H) --- DISCONTINUED. (Verified 07/96) RETAINED IN DATABASE FOR REFERENCE. --- One piece seamless shower stall for wheelchair roll in or transfer. Standard features: padded seat, folding, thermostatically controlled walter valve to prevent scorching, hand held shower head that attaches to wall mounted slide bar, grab bar, soap dish and curtain erod. All accessories are factory installed and steel reinforced at installation points. Fiberglass shower is reinforced with heavy duty steel bands to prohib...[More Information]
   
   
6. FIBERSHEEN ROLL IN SHOWER (MODEL 4236-H) --- DISCONTINUED. (Verified 07/96) RETAINED IN DATABASE FOR REFERENCE. --- One piece seamless shower stall for wheelchair roll-in or transfer. Standard features: padded seat, folding, thermostatically controlled water valve to prevent scorching, hand held shower head that attaches to a wall mounted slide bar, grab bar, soap dish and curtain rod. All accessories are factory installed and steel reinforced at installation points. Fiberglass shower is reinforced with heavy duty steel bands to prohib...[More Information]
   
   
7. FIBERSHEEN ROLL IN SHOWER (MODEL 6036-BF) --- DISCONTINUED. (Verified 07/96) RETAINED IN DATABASE FOR REFERENCE. --- One piece seamless shower stall for wheelchair roll in or transfer. Standard features: padded seat, folding, thermostatically controlled water valve to prevent scorching, hand held shower head that attaches to wall mounted slide bar, grab bar, soap dish and curtain rod. All accessories are factory installed and steel reinforced at installation points. Fiberglass shower is reinforced with heavy duty steel bands to prohibit...[More Information]
   
   
8. FIBERSHEEN ROLL-IN SHOWER (MODEL 4450-H) --- DISCONTINUED. (Verified 07/96) RETAINED IN DATABASE FOR REFERENCE. --- Large one-piece seamless shower stall for wheelchair roll-in or transfer. Standard features: padded seat, folding, thermostatically controlled water valve to prevent scorching, hand held shower head that attaches to wall mounted slide bar, grab bar, soap dish and curtain rod. All accessories are factory installed and steel reinforced at installation points. Fiberglass shower is reinforced with heavy duty steel bands to pr...[More Information]
   
   
9. HANDICAP BASES --- DISCONTINUED. (Verified 11/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Handicap Base is a roll-in shower insert designed to replace existing shower floors to provide wheelchair access. DIMENSIONS: 4 x 4 feet, or 5 x 5 feet with 3/4 x 4 inch lip; the bases are also fabricated to special order sizes; call for quote. COLOR: All colors available....[More Information]
   
   
10. HANDICAP SHOWER STALL (MODEL C 4836) --- DISCONTINUED. (Verified 11/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Handicap Shower Stall, model C 4836, is a shower cabinet with a built-in seat and grab bar designed to replace an existing shower fixture. The unit is ready to install for either right or left hand entry. OPTIONS: An additional grab bar and 3/4-inch rolling lip are also available. With the addition of the Wheelchair dam, this unit becomes a roll-in shower unit. DIMENSIONS: 48 x 36 x 83 inches overall. COLOR: All col...[More Information]
    
    
11. LIBERTE WHEELCHAIR ACCESSIBLE SHOWER UNIT (MODELS 6949 LH & 6950 RH) --- DISCONTINUED. (Verified 11/2008) RETAINED IN DATABASE FOR REFERENCE. --- One piece fiberglass shower stall with all adaptations for wheelchair use. Mixing valve, grab bars, fold down seat, nonslip removable ramp, 5 foot turning radius hand held shower head....[More Information]
    
    
12. OBERON T PRECAST TERRAZZO HANDICAPPED BASES --- DISCONTINUED. (Verified 12/2006) RETAINED IN DATABASE FOR REFERENCE. --- Terrazzo shower basins fabricated of "Wyoming White" marble chips cast in Type I Portland White Cement. Reinforcing metal on all larger sizes. Base is cast together with a brass drain and galvanized tile flange on the perimeter. Sealed to protect against water penetration. Stock sizes: 30 by 30 inches; 32 by 32 inches; 34 by 34 inches; 36 by 36 inches; 40 by 40 inches and 60 by 40 inches. Drain may be located anywhere o...[More Information]
    
    
13. ROLL IN SHOWER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Reinforced, laminated fiberglass shower stall base unit, white marine gel coat finish. Allows installation in existing bathrooms. Approach ramp sloped 12 to 1. Four sides of floor slope to center drain. Stock sizes: 4 by 4 feet, 5 by 4 feet, 5 by 5 feet. Special sizes on custom order available with Safetymix Visu Temp shower valve....[More Information]
    
    
14. ROLL IN SHOWER --- DISCONTINUED. (Verified 2/1998) RETAINED IN DATABASE FOR REFERENCE. --- Fiberglass shower stall, 4 1/2 feet square, entry ramp and exit lip for water retention. Molded shelf. Installed in four pieces: base and three wall panels. Single lever water controls, hand shower. Options: barrier free shower door, Safetymix shower head, wall mounted shower seat, grab bars....[More Information]
    
    
15. ROLLEASE 6000 --- DISCONTINUED. (Verified 10/96) RETAINED IN DATABASE FOR REFERENCE. --- RollEase is a roll in shower unit designed to offer complete and safe accessibilty to showers for persons with mobility disabilities. This bathroom unit requires no alteration to the bathroom's size or configuration, no changes to the user's exisiting plumbing system, no replacement of tiles or resurfacing of the walls or floors. Its shower base design is constructed to replace most sizes of bathtubs in today's homes; the...[More Information]
    
    
16. SAFETEK BARRIER FREE SHOWER BASES ---DISCONTINUED. (Verified 11/2000) RETAINED IN DATABASE FOR REFERENCE. ---The SafeTek Barrier Free Shower Bases and Ramps are designed for roll-in shower access. The bases and ramps are made of fiberglass and reinforced with wood. The bases feature a 2-inch drain hole and a built-in water retainer. OPTIONS: Ramps are available upon request Their cost ranges from $324 to $374. DIMENSIONS: Bases come in 36 x 36 inches, 48 x 36 inches, 54 x 32 inches, 60 x 30 inches, 60 x 32 inches, 56 x 48 inches...[More Information]
    
    
17. SAFETEK BARRIER FREE SHOWER STALLS ---DISCONTINUED. (Verified 11/2000) RETAINED IN DATABASE FOR REFERENCE. ---The SafeTek Barrier Free Shower Stalls come in 1-piece shells and 3-piece knock down units designed to provide roll-in shower access and, when combined with optional accessories, to provide special safety features. The 1-piece cabinets are made of fiberglass with galvanized steel stiffeners. The bases are reinforced with wood and feature a 2-inch drain hole and built-in water retainer. OPTIONS: Accessories include grab ...[More Information]
    
    
18. SHEPHERD CARE UNIT MODULAR BATH --- DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair accessible modular bath unit consists of roll in shower, accessible commode and vanity area with lever control hardware. OPTIONS: Stainless steel grab bars, and "call for assistance system." DIMENSIONS: Custom configurations available. Standard unit is approximately 60 x 60 inches with a 37 inch wide shower....[More Information]
    
    
19. SHOWER (MODEL SC H6036) --- DISCONTINUED. (Verified 3/2006) RETAINED IN DATABASE FOR REFERENCE. --- Shower with built in grab bars. Acrylic shower stall accessible to wheelchairs. Designed for institutional use. C.S.A. approved. Meets or exceeds A.N.S.I standards 2124.1 and 2124.2 1980, and ANSI standards for showers for the handicapped No. 117.1 1980. Three grab bars bolted to steel backing plates. Pressure equalizing mixing valve delivers a predetermined water temperature and compensates for pressure fluctuations in ...[More Information]
    
    
20. TUB-MASTER BARRIER-FREE SHOWER PACKAGES --- DISCONTINUED. (Verified 10/2003) RETAINED IN DATABASE FOR REFERENCE. --- Tub-Master Barrier-Free Shower Packages are roll-in showers designed for use by people who use wheelchairs or who have difficulty entering and exiting standard showers. The units include a specially designed fiberglass base and the Barrier-Free Shower Door (see separate entry). The doors fold compactly to allow complete access. OPTIONS: Grab bars, hand-held shower, and shower seat are available. DIMENSIONS (LxW): Shower...[More Information]
    
    
21. TUB-MASTER'S BARRIER FREE SHOWER BASE & WALL SYSTEM (MODEL BF60-30/1.75) --- DISCONTINUED. (Verified 10/2003) RETAINED IN DATABASE FOR REFERENCE. --- Tub-Master's Barrier Free Shower Base and Wall System is designed to be an alternative to complicated tub-to-shower conversions for people with mobility and balance disabilities. This four-piece fiberglass shower system includes three wall panels and a base. The fiberglass base is reinforced with a sanitary grade gel coat finish, and the entire unit is field-assembled with a mildew-resistant silicone sealant. The floor ...[More Information]
    
    

Page 1 of 1