Products are listed alphabetically.

Page 1 of 3    Next page »

1. ADAPTA-RAMP --- DISCONTINUED. (Verified 08/96) RETAINED IN DATABASE FOR REFERENCE. --- The ADAPTA-Ramp is a portable ramp designed to convert short run stairs into gentle slopes for use by wheelchair users, persons with limited mobility, and strollers. The ramp has a patented, folding, scissors-style extension design. Its interconnecting, interlocking components adjust to fit existing buildings to provide safe and solid access. Support legs adjust to the stair tread height and lock into place to handle maxi...[More Information]
   
   
2. ALUMINUM STAIR RAMP --- DISCONTINUED. (Verified 03/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Aluminum Stair Ramp is a portable ramp used to traverse stairs by persons with mobility disabilities or those using walkers or wheelchairs. The lightweight, portable, all-aluminum ramp is constructed with anti-slip flooring and full-length safety curbs. DIMENSIONS: Available in widths of 28 and 32 inches. Lengths are available in one foot increments starting at a minimum of four feet and topping out at a maximum len...[More Information]
   
   
3. ALUMINUM THRESHOLD RAMP -- DISCONTINUED. VERIFIED 10/2012. RETAINED IN DATABASE FOR REFERENCE. -- The Aluminum Threshold Ramp is a portable threshold ramp designed for individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs or scooters. Made of heavy duty aircraft aluminum, this portable ramp provides access for wheelchairs and scooters to doorways, sliding glass doors, and raised landings. DIMENSIONS (HxLxW): 3 x 17 x 34 inches. CAPACITY: 600 pounds. ...[More Information]
   
   
4. BEACH ACCESS --- DISCONTINUED. (Verified 08/96) RETAINED IN DATABASE FOR REFERENCE. --- Beach Access is a lightweight, portable walkway designed to provide access to the beach for individuals who are in a wheelchair. This is provided as an alternative to expensive specialty beach wheelchairs and allows those in a wheelchair to go further than public ramps and actually sit at the water's edge. One unit contains two mats, canvas beach bag for storage and four sand pins for securing when in use. Beach Access is...[More Information]
   
   
5. CHANNEL PORTA-RAMPS (MODELS 103C, 104C, & 105C) --- DISCONTINUED. (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- Channel Porta-Ramps, models 103C, 104C, 105C, are portable fiberglass ramps designed for wheelchair users. The ramps are covered with a non-skid textured surface and have side guards on both sides. CAPACITY: 700 pounds. DIMENSIONS: 8 inch overall width and 5 inch inner dimension. 3, 4, and 5 foot lengths are available. WEIGHT: 10, 14, and 18 pounds per pair respectively. OPTIONS: A platform that allows right and left tu...[More Information]
   
   
6. CHANNEL RAMPS --- DISCONTINUED. (Verified 05/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Channel Ramp is a two-track ramp designed to provide access over curbs and steps for individuals who use standard wheelchairs. These aluminum tracks have a fixed one-piece design and safety side rails. DIMENSIONS: Five feet long with a 4.75 inch clearance between the rails. CAPACITY: 350 pounds. WEIGHT: 5.75 pounds....[More Information]
   
   
7. DELUXE ADA ENTRY KIT --- DISCONTINUED. (Verified 03/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Deluxe ADA Entry Kit is a set of items including an access sign, an accessible doorbell, a and an ADA Reference designed to aid businesses in becoming accessible and Americans with Disabilities Act (ADA) compliant. The complete kit includes an ADA Doorbell (see separate entry), an ADA informational and directional sign, an alternative door sticker, a doorstop, an E-Z Access Roll-Up Ramp (see separate entry), a tape...[More Information]
   
   
8. DEPAC LIGHTWEIGHT, NON-METALIC FOLDING RAMPS (MODELS G3081, G3083, & G3085) --- DISCONTINUED. (Verified 11/2006) RETAINED IN DATABASE FOR REFERENCE. --- DEPAC Lightweight, Non-Metalic, Folding Ramps are portable ramps designed for use by individuals who use wheelchairs, walkers, or scooters. Constructed of lightweight composite materials, these weather-resistant ramps have a high-density foam core, a non-skid ramp surface, and non-slip pads at the top and bottom to prevent movement while in use. Model G3085 also includes a raised edge on the sides. All models fold for s...[More Information]
   
   
9. EMC-ACCESS RAMPS (MODELS R3000, R1000, R2000, & R500) --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- EMC-ACCESS RAMPS are van and portable ramps designed for loading wheelchairs or scooters in full-size or minivans. All models are constructed of extruded aluminum and have a non- skid driving surface. Model R3000 is designed for use with scooters and powered wheelchairs, Model R1000 is designed for use with manual wheelchairs; and Model R2000 is designed for use with manual or lightweight electric wheelchairs. Model R500...[More Information]
   
   
10. EVAC/RAMP --- DISCONTINUED. (Verified 08/96) RETAINED IN DATABASE FOR REFERENCE. --- The Evac/Ramp is a ramp for commercial busses designed to be an emergency exit route for wheelchair users or senior citizens when the power lift is inoperable. The ramp has a patented folding design which quickly extends into a ramp or stairs for safe exits from busses. The ramp adapts public transportation services to conform to assisted wheelchair access. The unit folds accordian- style for storage. A mounting plate sec...[More Information]
    
    
11. EZ TRIFOLD SUITCASE RAMP (MODELS EZTF 6, EZTF 7, EZTF 8, & EZTF 10) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Trifold Suitcase Ramp is a portable van ramp designed to enable individuals who use scooters and wheelchairs to enter and exit vans and mini-vans. These ramps are made of aluminum, have non-skid surfaces, a three-fold design for compact portability, and a built-in carrying handle. DIMENSIONS (LxW): Open, model EZTF 6 is 6 feet x 30 inches, model EZTF 7 is 7 feet x 30 inches, model EZTF 8 is 8 feet x 30 inches, and m...[More Information]
    
    
12. EZ-ACCESS PORTABLE RAMP (MODEL R1000) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Portable Ramp, model R100, is a portable single-track wheelchair and scooter ramp designed to roll up and store in a carrying case which may be attached to the back of the mobility unit. The tracks are fabricated of aluminum and feature a non-skid surface and latching on the two side rails. DIMENSIONS: 36 inches when extended; 30 inches wide. Collapsed diameter is 6 inches. CAPACITY: WIll hold up to 600 po...[More Information]
    
    
13. EZ-ACCESS RAMP --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Ramp is a two-track wheelchair ramp designed to be stored in a carrying case which may be attached to the back of the mobility unit. The tracks are fabricated of aluminum and feature a non-skid surface and latching on the two side rails. DIMENSIONS: 60 inches when extended; collapses to 28 inches. CAPACITY: 350 pounds. WEIGHT: 14 pounds....[More Information]
    
    
14. EZ-ACCESS SCOOTER RAMP (MODEL R3000) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Scooter Ramp, model R3000, is a portable ramp designed for scooter and wheelchair access to vans and minivans. This platform style ramp features side rails and center panels that slide into place and lock to provide a solid, non-skid surface. The ramp is made of anodized aluminum. DIMENSIONS: Extends up to 8 feet long. CAPACITY: Will hold up to 750 pounds....[More Information]
    
    
15. EZ-ACCESS SUITCASE RAMP (MODELS EZ14, EZ13, EZ11, EZ10, & EZ12) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Suitcase Ramp is a portable ramp designed to enable individuals who use scooters and wheelchairs to traverse steps and curbs. These ramps are made of anodized aluminum, have non-skid surfaces, a fold-in-half design for compact portability, and a built-in carrying handle. DIMENSIONS: All models have a 30-inch wide driving surface. Model EZ14 is 6 feet long, EZ13 is 2 feet long, model EZ11 is 4 feet long, mo...[More Information]
    
    
16. EZ-ACCESS TELESCOPING PLATFORM RAMP --- DISCONTINUED. (Verified 03/2009) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Telescoping Platform Ramp is a portable single-track wheelchair and scooter ramp designed for use by individuals with mobility disabilities. The ramp is designed to be used for curbs, one to three steps, minivans and full-size vans. This ramp features two telescoping sections that connect to create one telescoping section, allowing the ramp to be used at various lengths. The tracks are made of anodized alu...[More Information]
    
    
17. EZ-ACCESS TRACK RAMP (MODELS R2000 & R6000) --- DISCONTINUED. (Verified 02/013) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-ACCESS Track Ramp is a two-track portable telescoping ramp for vans and minivans designed to accommodate manual and electric wheelchairs. Made of aluminum with a non-skid surface, these tracks feature special snap-button catches that lock the ramp securely into place. DIMENSIONS (HxLxW each track): 2.5 x 36, 60, or 72 x 9.5 inches (model R2000); 2.5 x 48, 72, or 120 x 9.5 inches (model R6000). When collapsed for s...[More Information]
    
    
18. EZ-ACCESS VANRAMP (MODELS EZ01, EZ02, & EZ04) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Vanramp is a portable van ramp designed to enable individuals who use scooters and wheelchairs to enter and exit vans and mini-vans. These ramps are made of aluminum,and they feature non-skid surfaces. A carrying case is included with model EZ01. Simply extend the ramp, hold it securely in place with snap buttons, and align the wheels of a wheelchair in the U-shaped tracks to enter and exit vans. DIMENSION...[More Information]
    
    
19. EZ-ACESS ROLL-UP (MODELS EZ07 & EZ09) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Roll-Up are portable single-track wheelchair and scooter ramps designed for use by individuals with mobility disabilities. These ramps roll up and store in a carrying case which may be attached to the back of the mobility unit. The tracks are fabricated of aluminum and feature a non-skid surface and latching on the two side rails. DIMENSIONS: Model EZ07 is 36 inches long when extended and 30 inches wide. T...[More Information]
    
    
20. EZY RAMP --- DISCONTINUED. (Verified 11/2003) RETAINED IN DATABASE FOR REFERENCE. --- The Ezy Ramp is a portable wheelchair ramp. It is constructed of steel sides with expanded nonslip metal tread. When folded the ramp fits in most automobile trunks'. DIMENSION: 28 x 30 x to 28 x 120 inches. Custom made sizes of 120 inches or wider are also available. WEIGHT: Shipping weight 22 to 125 pounds....[More Information]
    
    
21. FOLD & CARRY RAMPS --- DISCONTINUED. (Verified 4/97) RETAINED IN DATABASE FOR REFERENCE. --- The Fold & Carry Ramps are portable ramps that provide access to persons using wheelchairs and scooters. These aluminum hinged ramps are designed to fold up such that they can be carried like a suitcase and have a built-in handle. There is a safety lip on each side of a ramp. DIMENSIONS (LXW): 3 or 5 feet x 30 inches. These ramps fold to 15 inches wide. CAPACITY: 600 pounds. WEIGHT: 18 pounds (3 foot ramps); 30 pound...[More Information]
    
    
22. FOLDABLE PORTA RAMPS --- DISCONTINUED. (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Foldable Porta Ramp is a portable lightweight folding ramp designed to be used by individuals in wheelchairs or others who are unable to use stairs. The features include a special hinge which activates an adjustable center leg support that drops into place when the ramp is unfolded. The ramp is made of fiberglass and covered with a nonskid surface and side rails. CAPACITY: 700 pounds. DIMENSIONS: Available in 4, 5, ...[More Information]
    
    
23. FOLDING RAMPS --- DISCONTINUED. (Verified 11/2008) RETAINED IN DATABASE FOR REFERENCE. --- Portable folding ramp for wheelchairs and wheelchair alternatives. Anodized aluminum construction. Skid resistant surface. Indoor and outdoor use. Hinged. Maximum load capacity 750 pounds. Available lengths: 4, 6, 8, 10 and 12 feet. Available widths: 26, 33 and 36 inches. ....[More Information]
    
    
24. HANDICAP RAMP --- DISCONTINUED. (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Handicap Ramp is designed to allow wheelchair users to get in and out of van-type vehicles and buildings. It is maintenance free and portable. Standard features include one-person operation; spring assisted, skid resistant, aluminum or steel construction; and side or rear door mounting. No vehicle modification is necessary for use. The ramp comes in portable folding, portable nonfolding or permanent styles. Stair lo...[More Information]
    
    
25. INDIANA RAMPS --- DISCONTINUED. (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- Indiana Ramps are indoor and outdoor portable ramps for permanent or semi- permanent applications. The ramps are constructed of heavy-duty, lightweight aluminum and feature handles, safety end caps, non-skid safety tracks, a flanged threshold plate, and adjustable stabilizing legs with non-slip rubber feet. The feet are available 8 to 30 inches in height and spaced 8 to 9 feet apart. OPTIONS: Custom ramps designed to us...[More Information]
    
    

Page 1 of 3    Next page »