Products are listed alphabetically.

« Previous page    Page 2 of 5    Next page »

26. BRAUN RA400 TRANSIT RAMP The Braun RA400 Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the ramp section folds back onto the base. When the ramp is extended, it is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its fully extended position using gravity. It closes in a similar manner. It has a manual override in case of power loss or malfunction. No pre-assembly is require...[More Information]
    
    
27. BRAUN RA400H TRANSIT RAMP The Braun RA400H Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the ramp section folds back onto the base. When the ramp is extended, it is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its fully extended position using gravity. It closes in a similar manner. It has a manual override in case of power loss or malfunction. No pre-assembly is requir...[More Information]
    
    
28. BRIDGE THRESHOLD RAMP (MODELS TR1, TR1.5, TR2, & TR3) The Bridge Threshold Ramp is designed to provide wheelchair or scooter access over single steps or doorways. The ramp is made from aluminum with a non-slip surface. OPTIONS: Light duty plate for creating a bridge between the ground and doorway threshold. DIMENSIONS (LxW): 8 x 36 (model TR1), 10 x 36 (model TR1.5), 14 x 36 (model TR2), or 18 x 36 inches (model TR3). Rise is 1 inch (model TR1), 1.5 inches (model TR1.5), 2 inches (model TR2), or 3 inches (model TR3). CAPACITY: 750 pounds. ...[More Information]
    
    
29. BUTT RAMP The Butt Ramp is a portable threshold ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over thresholds or to get on or off of a curb. This straight aluminum ramp has a low rise and is available with wheel guards on both sides or on the left or right side only. The high end of the ramp butts up against the wall under the threshold, and it is raised by legs. The lower end ...[More Information]
    
    
30. CARLITE SERIES RAMP The Carlite Series Ramp is a portable ramp designed to provide wheelchair access for individuals with lower extremity or mobility disabilities or spinal cord injury. Made from aluminum, the ramp has an anti-slip tread with safety curbs on the sides. DIMENSIONS: Standard lengths are 1 to 6 feet and standard widths are 30 to 36 inches. Custom sizes are available....[More Information]
    
    
31. CONCRETE DECK RAMP SYSTEM The Concrete Deck Ramp System is a modular ramp system designed to provide wheelchair and scooter access in modular structures such as classrooms, offices, churches, and public buildings. This tough and durable ramp system looks and feels permanent, but is actually modular and can be relocated with a portable structure. The ramp has a heavy-duty steel tube frame with a concrete panel surface, with custom sizes and dimensions to fit the location. The ramp can withstand water, freezing and thawing...[More Information]
    
    
32. CURB RAMP The Curb Ramp is a portable ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over curbs or uneven thresholds. Made from aluminum, the ramp is available with wheel guards on both sides, or with no wheel guards, allowing it to be used at a threshold where a door swings out. It has transition plates on both ends for a smooth entrance onto or exit off of the ramp. DIMENSIONS...[More Information]
    
    
33. CUSTOM REDWOOD RAMP Custom Redwood Ramps are ramps designed for use by individuals with lower extremity, mobility, or walking disabilities or spinal cord injury. This heavy duty ramp works with wheelchairs, walkers, scooters or canes. Each ramp is custom designed to meet the requirements of a specific environment, including situations where an redwood ramp is preferred over a standard aluminum ramps for aesthetic reasons. OPTIONS: Handrails can be added on one or both sides....[More Information]
    
    
34. DECPAC MULTIPURPOSE RAMP (MODEL MP44) The Decpac Multipurpose Ramp, model MP44, is a portable ramp designed for use to provide access to vans or steps for individuals with mobility or lower extremity disabilities or spinal cord injury. This four-panel folding ramp can be used for a rise up to 13 inches over steps at home or to enter the side of a minivan. When folded it can fit into a van and slide under a seat. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked ...[More Information]
    
    
35. DECPAC MULTIPURPOSE RAMP (MODEL MP55) The Decpac Multipurpose Ramp, model MP55, is a portable ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It can be used as a temporary wheelchair ramp in a rented home or in a building that does not have homes, such as one that has historical significance. The ramp can accommodate a rise of up to 16 inches. It is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. Th...[More Information]
    
    
36. DECPAC MULTIPURPOSE RAMP (MODEL MP66) The Decpac Multipurpose Ramp, model MP66,is a portable ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It can be used for a rise of up to 20 inches. It has four laminated fiberglass panels that are secured with a hook and loop strap when folded. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the ...[More Information]
    
    
37. DECPAC MULTIPURPOSE RAMP WITH EDGE BARRIER (MODEL MPEB44 ) The Decpac Multipurpose Ramp with Edge Barrier, model MPEB44, is a ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It is a four-panel folding ramp with side barriers to help keep a wheelchair, scooter or stroller on the ramp. This ramp can be used for entryways with steps or to enter or exit a minivan on the side. The ramp can be used for a rise up to 13 inches. When folded the ramp can fit in a van and slide under a seat. The ramp is mad...[More Information]
    
    
38. DECPAC MULTIPURPOSE RAMP WITH EDGE BARRIER (MODEL MPEB55) The Decpac Multipurpose Ramp with Edge Barrier, model MPEB55, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This collapsible four panel ramp can fit a rise of up to 16 inches. It fits in the side of a minivan, but when folded is compact enough to store under the seat of the van. Constructed from laminated fiberglass. its top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge ...[More Information]
    
    
39. DECPAC MULTIPURPOSE RAMP WITH EDGE BARRIER (MODEL MPEB66) The Decpac Multipurpose Ramp with Edge Barrier, model MPEB66, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp can accommodate a rise of up to 20 inches, and it can be used for van access. Constructed from laminated fiberglass, its top surface has a textured non-slip tread and the edges are marked with a red caution stripe. Edge barriers are included for safety. The top edge is indicated with a label and it has a th...[More Information]
    
    
40. DECPAC PERSONAL MINI RAMP (MODEL MP24) The Decpac Personal Mini Ramp, model MP24, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. The ramp is small enough to carry in a bag on a wheelchair and can be stored in a vehicle or at home. The ramp is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the step. The rubber g...[More Information]
    
    
41. DECPAC PERSONAL STANDARD RAMP (MODEL MP210) The Decpac Personal Standard Ramp, model MP210, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. This ramp can be used to navigate over curbs or thresholds with a rise of up to 9 inches, and it is small enough to be carried in a bag on a wheelchair. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread, and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, ...[More Information]
    
    
42. E-Z ACCESS RAMP (MODELS RAEZ0110, RAEZ0120, RAEZ0130, RAEZ0140, RAEZ1110, RAEZ1120, RAEZ1130, RAEZ1140, RAEZ1510, RAEZ1520, RAEZ1530, RAEZ1540, RAEZ2150, RAEZ2160, & RAEZ2170) The E-Z Access Ramp is a ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp has a 1:12 slope and can be installed on any surface at interior or exterior thresholds. It has a slip-resistant, scuff-resistant surface, and can be cut to exact size and covered with carpet. DIMENSIONS (HxLxW): 7/8 x 6 x 42 inches (model RAEZ0110), 7/8 x 6 x 60.5 inches (model RAEZ0120), 7/8 x 6 x 69.5 pounds (model RAEZ0130), 7/8 x 6 x 78.5 inches (model RAEZ0140), 1.25 x ...[More Information]
    
    
43. EZ EDGE RAMP SYSTEM (MODELS RAEZ0010, RAEZ0020, RAEZ0030, RAEZ0040 & RAEZ0050) The EZ Edge Ramp System, models RAEZ0010, RAEZ0020, RAEZ0030, RAEZ0040 and RAEZ0050, is a threshold ramp designed to provide access for individuals with lower extremity, mobility and walking disabilities, spinal cord injury and others who use wheelchairs. Molded under heat and pressure, these 100 percent recycled rubber, anti-slip ramps feature rounded front edges and molded traction pads and can be planed or trimmed to fit any doorjamb or uneven rise. The ramps may be installed using silicone ...[More Information]
    
    
44. EZ-ACCESS SUITCASE SIGNATURE SERIES RAMP (MODELS SS2, SS3, SS4, SS5, SS6, SS7 & SS8) The EZ-ACCESS SUITCASE Signature Series Ramps are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to with some minivans, vans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and whe...[More Information]
    
    
45. EZ-ACCESS THRESHOLD RAMP (MODELS 1, 1.5, 2, 3, 4, 5 & 6) The EZ-Access Threshold Ramp is designed for persons with physical disabilities who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of durable extruded anodized aluminum and has a long, non-skid driving surface for maximum safety and support. A special finish resists dents and scratches. A flap attachment for sliding door tracks and installation hardware are included. Ramps accommodate t...[More Information]
    
    
46. FIXED RAMP FOR TRAINS The Fixed Ramp for Trains is a rail car ramp designed enable wheelchair users to enter and exit trains. The ramp set-up consists of three main elements: a Stepless Lite Ramp (see separate entry); a mechanical arm that is attached to the ramp and holds it in position; and a free-standing cabinet to store the ramp when it is not in use. When not in use, the ramp is folded width-wise and placed in the cabinet by the door. The mechanical arm allows train staff to operate the ramp and make it ready f...[More Information]
    
    
47. FLEX-RAMP The Flex-Ramp is a van ramp designed for use by individuals with mobility disabilities. This lightweight aluminum ramp converts a mini-van or full-size van into a wheelchair-accessible vehicle. The ramp is attached to the floor of the vehicle and extended outward when the door is opened. It can also be detached from the floor and moved to another location such as a curb or steps. OPTIONS: Two wheel cart for transporting ramp. SIZES: Mini-van, full-sized van, or extra capacity. DIMENSIONS (LxW): ...[More Information]
    
    
48. FOLD-A-WAY RAMP (MODEL D-FAR-120) The Fold-A-Way Ramp, model D-FAR-120, is a pair of folding tracks designed for use by individuals with in wheelchairs. Tracks have a slip-resistant surface for traction. Each ramp track comes with two handles for positioning and can be folded for storage. DIMENSIONS (HxLxW): Each track is 4.25 x 120 x 7 7/8 inches. CAPACITY: 550 pounds. WEIGHT: 77 pounds per pair....[More Information]
    
    
49. FOLDING ALUMINUM RAMP The Folding Aluminum Ramp is an accessible folding ramp designed for use by individuals who use wheelchairs or scooters. Made of anodized aluminum, this ramp is trimmed at the edges with a coarse finish strip to the side to prevent slippage. The build up of ice is prevented by treads that are slotted to facilitate drainage. This ramp comes with a handle and locks and can be stored in the back of a car. DIMENSIONS: Available is 3 inches, 4 inches, and 5 inches....[More Information]
    
    
50. FOLDING RAMP The Folding Ramp is a portable ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over vertical barriers. The ramp is made of aluminum with an anti-slip tread surface and safety curbs. It folds for carrying or storage. DIMENSIONS: Standard lengths is 3 to 6 feet, and standard width is 30 inches. Custom sizes are available. WARRANTY: 10 years....[More Information]
    
    

« Previous page    Page 2 of 5    Next page »