Products are listed alphabetically.

Page 1 of 2    Next page »

1. ABLE SWITCH 500 --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- ABLE SWITCH 500 is a receiver that works in conjunction with the ABLE SWITCH Models 200, 300, & 400 to provide wireless remote control of devices requiring a normally open/momentarily closed switch action for operation. Output is a normally open relay contact that closes with the remote control is activated. Can be connected to a hospital call switch jack. Contains a backup battery that will continue to operate the device in the event of ...[More Information]
   
   
2. ADA 120 AUDIO VISUAL ALERT SYSTEM --- DISCONTINUED. (Verified 11/2006) RETAINED IN DATABASE FOR REFERENCE. --- The ADA 120 Audio Visual Alert System is a flashing light and enhanced audible doorbell signal. This unit was developed to convert any existing apartment house intercom system into one which will assist people with hearing disabilities. The unit is activated when a person pushes an apartment button on the entrance panel. Inside the apartment, the system's strobe light will flash for up to three minutes, and a buzzer (up...[More Information]
   
   
3. ADAPTED REMOTE WIRELESS PAGING ALARM (MODEL 3102) --- DISCONTINUED. (Verified 12/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Adapted Remote Wireless Paging Alarm, model 3102, is a call signal designed to allow an individual with a disability to summon assistance without disturbing others in the same room. When the transmitter button is depressed, chimes in the receiver sound up to 100 feet away. The transmitter and receiver are free standing. The transmitter can also be operated with any momentary switch (not included) that accepts a 1/8-...[More Information]
   
   
4. ATTENDANT BUZZER (MODEL NC-1) --- DISCONTINUED. (Verified 08/04) RETAINED IN DATABASE FOR REFERENCE. --- The Attendant Buzzer, model NC-1, is an audible beeper paging system designed to provide momentary operation with any single switch for individuals with physical, cognitive or sensory disabilities. It emits a high-pitched tone which is audible for 100 feet in a quiet environment. Velcro is provided for mounting to wall, bed wheelchair, etc. POWER: Uses one nine volt battery. DIMENSIONS: Measures 2.5 x 1.75 x 2.75 inches. ...[More Information]
   
   
5. ATTENDANT CALL (ACCS) --- DISCONTINUED. (Verified 08/04) RETAINED IN DATABASE FOR REFERENCE. --- The Attendant Call, model ACCS, is an audible beeper paging system designed to be used as a local or remote call signal for individuals with physical cognitive or sensory disabilities who use switches. The loud call signal plugs into the AC outlet of a DU-IT (or other manufacturer's) ECU or into an X-10 Appliance Module (see separate entries). Depending on which module it is plugged into it can be latching or momentary....[More Information]
   
   
6. BEDSIDE COMMUNICATOR (MODEL 7500) --- DISCONTINUED. (Verified 11/2004) RETAINED IN DATABASE FOR REFERENCE. --- TThe Bedside Communicator, model 7500, is a scanning communicator with a nurse call feature designed for use by individuals with motor and communication disabilities. This device has a scanning capacity of up to eight messages plus a nurse call feature. The eight recorded messages can be recorded as necessary. The nurse call feature will activate a buzzer or alert the nursing station if connected to a nurse call box (ad...[More Information]
   
   
7. BEEPER (MODEL 1125), ADAPTED BEEPER (MODEL 1126), & ADAPTED LIGHT BEEPER (MODEL 1128) --- DISCONTINUED. (Verified 12/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Beeper, Adapted Beeper, and Adapted Light Beeper are call signal devices that can be used to attract attention or to train individuals who are beginning to use a single switch. The Beeper, model 1125 ($41.95), consists of a flat plate which is activated by pressure on the top surface. This signal allows single switch signalling for producing individual codes or Morse codes. The Adapted Beeper, model 1126 ($51.95), h...[More Information]
   
   
8. CALL BUZZER CB-1 --- DISCONTINUED. (Verified 02/93) RETAINED IN DATABASE FOR REFERENCE. --- Call buzzer provides an audio signal while user depresses operator switch. When switch is released, sound subsides. Battery operated....[More Information]
   
   
9. CALL SIGNAL 2 (MODEL CS-2) --- DISCONTINUED. (Verified 3/96) RETAINED IN DATABASE FOR REFERENCE. -- Call Signal 2, model CS-2, is a signaling device activated by any single or dual switch. If a dual switch is used, activation of either switch will produce a tone, and one of two lamps on the Call Signal 2 will light. Activation with a single switch produces a tone only. Call Signal 2 may also be used as an evaluation and training device for individuals learning the use of control devices. Call Signal 2 comes with a 25-foo...[More Information]
   
   
10. CHIME ALARM --- DISCONTINUED. (Verified 6/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Chime Alarm is a call signal designed to be operated with a single switch. As the chime sounds, a light provides visual feedback. Both the tone and light go on when the switch is pressed and held. Chiming stops when the switch is released. When paired with the Switch Latch/Timer (see separate entry), chiming can be started with a switch press and continued for a set period of time or until a second switch press is re...[More Information]
    
    
11. COMMUNICATION BUZZER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Signal buzzer. Operated by push button switch, or any adaptive switch that uses a mini telephone plug. Requires 9 volt battery....[More Information]
    
    
12. DIALCOMM AUTODIAL ENTRY SYSTEM --- DISCONTINUED. (Verified 12/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Dialcomm Autodial Entry System is door entry and call system designed for retrofitting an existing building entry buzzer panel without having to install a new console or re-finish a wall. Dialcomm is installed in the wall behind the existing buzzer panel and allows existing buttons to connect the caller with the apartment occupant by automatically dialing the occupant's telephone number. The occupant can then have a...[More Information]
    
    
13. EASY TOUCH CONTACT SIGNAL BUZZER (MODEL 1100) --- DISCONTINUED. (Verified 4/2000) RETAINED IN DATABASE FOR REFERENCE. --- Soft, vinyl cushion, touch switch. Standard plug replaces nurse call switch. Designed for minimal pressure, can be operated by any part of the body....[More Information]
    
    
14. EXTRA LOUD SIGNAL BUZZER (MODEL 1320) --- DISCONTINUED. (Verified 11/2004) RETAINED IN DATABSE FOR REFERENCE. --- The Extra Loud Signal Buzzer, model 1320, is a call signal designed for use by individuals with severe physical disabilities. When the switch plate is activated, an extra loud buzzer sounds. Suction cups on the base secure the unit to any smooth, flat surface.POWER: Uses 2 double A batteries. DIMENSIONS: The switch plate is 3 x 5 inches. COLOR: Yellow switch plate....[More Information]
    
    
15. MIRAC WAKE-UP VIBRATOR (MODEL V-92) --- DISCONTINUED. (Verified 05/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Mirac Wake-up Vibrator Model V-92 is a vibrating accessory for an alarm clock or standard remote receiver to be used for waking up and signaling persons with hearing disabilities. POWER: AC plug in....[More Information]
    
    
16. NURSE CALL BUZZER FOR THE HOME. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Call signal system and limited environmental control system. No wiring required, just plug master control into standard wall outlet. Master control activates a pleasant sounding buzzer in any room, or next door neighbors house. Master control unit can also control (turn on or off) lights, television set, siren or any desired appliance by using a light and appliance module with the master control. Remote system available. Dimensions: maste...[More Information]
    
    
17. PATIENT SENTINEL (MODEL 2580) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Signaling device which permits a powered wheelchair user to call for attendant assistance. Activated by single contact switch (purchased separately). Emits a pulsing tone and a flashing light. Powered by one of the wheelchair's 12 volt batteries utilizing power cable. Has alternate on/off mode (switch closure alternately turns device on and off) and momentary on/off mode (continuous switch closure turns device on, releasing switch turns i...[More Information]
    
    
18. PATIENT SENTINEL (MODEL 2581) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Signaling device powered by 9 volt transistor battery. Permits user to call for attendant assistance. When activated by a single contact type switch (not included) the Sentinel emits an intense pulsing tone. Features alternate on/off mode (switch closure alternately turns the device on and off) and momentary on/off mode (continuous switch closure turns the device on, releasing turns it off). May purchase third operating mode which permits...[More Information]
    
    
19. PATIENT SENTINEL (MODEL 2582) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Signaling device powered by 9 volt battery. Permits user to call for attendant assistance. When activated by a single contact type switch ( not included) the sentinel emits an intense pulsing tone. Warning light indicates low battery. Features alternate on/off mode (switch closure alternately turns the device on and off) and momentary on/off mode ( continuous switch closure turns the device on, releasing turns it off). May purchase third ...[More Information]
    
    
20. PERSONAL CHIME PAGER (MODEL 4000) --- DISCONTINUED. (Verified 02/16/93) RETAINED IN DATABASE FOR REFERENCE. --- The Personal Chime Pager is a call signal and audible beeper paging system that includes a chime pager switch and receiver. The system can be used to alert family members or professional staff that assistance or help is needed. The personal pager can be worn around the user's neck or carried in a purse or pocket. By pressing the button switch, the remote receiver will begin to chime, indicating request for attention. ...[More Information]
    
    
21. PRENTKE ROMICH BUZZER (MODEL BU 1) --- DISCONTINUED. (Verified 3/96) RETAINED IN DATABASE FOR REFERENCE. --- The Prentke Romich Buzzer, model BU 1, is a call signal with a 2 prong electric plug on one end. It can be plugged into one 110 volt AC receptacle to serve as a call signal, and can be modified for BSR operation with PRC's EM-3 unit. Environmental control accessories are available for use with the Buzzer....[More Information]
    
    
22. PUFF 'N BUZZER SWITCH (MODEL H71851) --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Puff'N Buzzer Switch is a breath operated call signal. The user blows into a tube which connects to a switch housing. Breath in the tube then triggers a signal that is sent out through a retractile cable terminating in a phone plug. This unit will typically be hooked up to some sort of centralized call system, such as that in a hospital. DIMENSIONS: 4.5 x 3.5 x 2.5 inches. WEIGHT: 1.5 pounds....[More Information]
    
    
23. RND REMOTE CONTROL PAGING DEVICE (MODEL LC115V) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Paging device or call signal. Activated by a hand held transmitter, uses your home electrical circuit to deliver its signal, easily recognized tone, solid state microcircuit, signal may be received in neighbors home, basement, garage patio, all electric circuits on the same transformer. Allows the user up to 150 feet of mobility range....[More Information]
    
    
24. RND TOUCH SENSITIVE PAGING DEVICE (MODEL 9V50) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Paging device or call signal. Touch sensitive switch, 50 foot telephone cord, portable, compact size, solid state microcircuit, easily recognized tone, low electric 9 volt power, no moving parts....[More Information]
    
    
25. RND TOUCH SENSITIVE PAGING DEVICE (MODEL LC115V) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Paging device or call signal. Uses home electrical circuit to deliver its signal. Touch sensitive switch, easily recognized tone, solid state microcircuit, portable easy to use, signal may be received in neighbors home, basement, patio, garage, all electric circuits on the same transformer....[More Information]
    
    

Page 1 of 2    Next page »