Products are listed alphabetically.

Page 1 of 1

1. 25 GRIPPERS The 25 Grippers are a set of 25 triangular finger grips designed for individuals with fine motor and grasping disabilities. These triangular grips help position the user's hand for writing and they can also be used with some cutlery, toothbrushes, and other small utensils. COLOR: Assorted bright colors....[More Information]
   
   
2. ABLEWARE RING WRITER CLIP The Ableware Ring Writer Clip is a a utensil or pen or pencil holder designed for use by individuals with arthritis or limited manual dexterity or gripping ability. Made of polyethylene, this device consists of two linked rings. The larger ring slips over a thumb or finger and the implement or utensil handle slips into the smaller ring at the correct angle for use. This device can be used with pens, pencils, paint brushes, straight razors, tooth brushes, etc. SIZES: The package of three include...[More Information]
   
   
3. ADULT WEIGHTED HOLDER The Adult Weighted Holder is a pencil or pen holder designed for use by individuals with upper extremity disabilities. These holders securely hold most round or irregularly shaped items from 1/8-inch to 7/16-inch in diameter. This weighted handle is available in a standard or deluxe model and uses three adjustable set screws to accommodate different sizes. The deluxe model has a plastic vinyl handle and the standard model has a metal handle. The set includes a Husky pencil, a pencil sharpener, a...[More Information]
   
   
4. ARTIST'S WORK STATION ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adjustable drawing table and felt tipped marker holder which can be controlled by an artist with no hand function using a mouthstick. The work station includes a commercial drawing table with a motor driven device to raise or lower the board, adjusted to allow control of the board angle; it uses magnets to hold paper onto the metal surface of the board; and a " lazy susan" device with holes in it to hold drawing implements, placed on a hospital sty...[More Information]
   
   
5. ASSORTED FOAM GRIPS The Assorted Foam Grips are a set of pencil holders designed for use by children and adults with upper extremity disabilities. The set includes one Foam Grip, one Ridged Foam Grip, one Baseball Grip,one Swirl Grip, and one Thick 'N Thin Foam Grip (all styles also available individually). DIMENSIONS: The Baseball Grip is 2.25 inches long and the other styles are 1.5 inches long....[More Information]
   
   
6. Aid to Independence: Hand Splint for Cerebral Palsied Children. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Hand splint to enable a child with cerebral palsy to hold a pencil, crayon or stick. Discusses construction of the splint, rationale for use and advantages and disadvantages. The splint consists of 2 parts: a molded plastic forearm splint with straps to keep the hand at 20 percent extension, and a dowel for the child's fingers to fit around which has a hole to hold a pencil or crayon. Includes drawings and photographs. SKILLS REQUIRED: Plastics. AU...[More Information]
   
   
7. BASEBALL FOAM GRIP The Baseball Foam Grip is a pencil holder designed for use by children and adults with upper extremity disabilities. This soft grip is shaped like a baseball bat and is slightly enlarged at one end to provide tactile and visual cues for finger positioning. DIMENSIONS: 2.5 inches long....[More Information]
   
   
8. BULB SHAPED GRIPS The Bulb Shaped Grips are pencil holders designed for use by individuals with fine motor and other upper extremity disabilities. These bulb-shaped soft plastic grips slip on to any standard size pen or pencil and have three sides for finger placement. This design provides comfortable finger positioning and prevents the writing utensil from rolling. COLOR: Blue....[More Information]
   
   
9. EZGRIP PEN/TOOL GRIP The EzGrip Pen/Tool Grip is is a pen, pencil, tool or utensil holder designed for use by individuals with arthritis or other grasping or upper extremity disabilities. Made of a soft rubber composite that is hypoallergenic and can be cleaned and chemically sterilized, this ergonomic slip-on grip works with pens, pencils, modeling tools and knives, picks, probes, scribes, and other pencil-like tools and utensils. This grip requires only one finger, knuckle, or thumb to exert downward pressure on t...[More Information]
   
   
10. FOAM GRIP The Foam Grip is a pencil holder designed for use by children and adults with upper extremity disabilities. This short round grip provides a cushion for those who grip the writing implement too tight. DIMENSIONS: 1.5 inches long....[More Information]
    
    
11. FOAM GRIPS The Foam Grips are pen and pencil holders designed to aid people with arthritis or fine motor disabilities or other disabilities of the finger or hand in gripping pencils or pens or other small utensils or tools. These soft foam tubes slide onto standard pens or pencils or other items. COLOR: Assorted....[More Information]
    
    
12. FREEDOM WRITER The Freedom Writer a pen holder designed to assist people with limited grasping ability or manual dexterity. The device consists of a wide, lightweight, clear plastic base with a hole at the front through which the pen is inserted. The base supports the hand and a gentle downward pressure brings the pen (included) into contact with the paper. A slight withdrawl of the hand lifts the pen to move on to the next word. The device accepts any standard pen or pencil....[More Information]
    
    
13. HOYLE GRIP RITE GRIPPERS, HOYLE SUPER GRIP, & ROUND GRIPPERS Triangular or round grips slide over shaft of pen, pencil or other hand held items. Soft vinyl provides more comfortable grip when writing and encourages natural finger hold to minimize finger strain. Several sizes available to fit variety of hand held tools such as crochet hooks, paintbrushes or silverware. Bag of 14 contains 7 sizes, 2 of each size. Pen and pencil holders available in bags of 25 or 100; Super Grip holders fit larger diameter ball point pens, crayons and some silverware. The gr...[More Information]
    
    
14. KLICK PENCIL HOLDER (MODEL 6058) The Klick Pencil Holder, model 6058, is a pencil or pen holder designed for use with a universal cuff. The device consists of a 2-roller locking mechanism which holds the utensil in place. The desired angle can be set with a screwdriver by bending the metal frame to tilt the pencil back under the palm if needed. A clicking sound indicates that the pencil is in place. The device adjusts to right or left hand and can be used with any utensil holder....[More Information]
    
    
15. ORTHOCARE WANCHIK'S WRITER The Orthocare Wanchik's Writer is a pen or pencil holder and writing orthosis that attaches to the hand and index finger. Available in models for the right or left hand, the brace holds the writing instrument in three- point pinch. SIZES: Junior, Small (women), and Large (men)....[More Information]
    
    
16. ORTHOCARE WANCHIK'S WRITER ##2 The Orthocare Wanchik's Writer ##2 is a pen or pencil holder, or orthotic writing aid, that provides wrist support on the dorsal (top) surface of the forearm, wrist and hand, and full support of the index finger in a flexed writing position. Two Velcro straps secure the orthosis at the forearm and wrist. SIZES: Available in left and right hand models; Small (##4036, ##4037) and Large (##4038, ##4039)....[More Information]
    
    
17. PEDIATRIC WEIGHTED HOLDER The Pediatric Weighted Holder is a pencil or pen holder designed for use by individuals with upper extremity disabilities. These holders securely hold most round or irregularly shaped items from 1/8-inch to 7/16-inch in diameter. This weighted handle is available in a standard or deluxe model and uses three adjustable set screws to accommodate different sizes. The deluxe model has a plastic vinyl handle and the standard model has a metal handle. The set includes a number 2 pencil, an allen wrenc...[More Information]
    
    
18. PEN AND PENCIL HOLDER The Pen and Pencil Holders are triangular finger grips designed to aid people with arthritis or fine motor disabilities or other disabilities of the finger or hand in gripping pencils or pens. These molded soft palstic grips slide onto standard pens or pencils. COLOR: Assorted....[More Information]
    
    
19. PEN GRIP ---DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with ALS to hold a pen. The Pen grip provided extra strength between thumb and forefinger to enable the user to hold the pen in place and write. The grip is made from a quarter-inch strip of splint plastic that becomes pliable when heated in near boiling water (available at medical supply stores). Each grip needs to be custom shaped (with trial and error) according to the user's gripping style and strength. Each arm of the grip comes a...[More Information]
    
    
20. PEN OR PENCIL HOLDER. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Simple pen or pencil holder for persons unable to grasp pen or pencil. Cut two thin strips of aluminum. Bend one strip to form a clip to hold a pen or pencil and bend the other strip to clip over thumb. Loosely rivet the strips at the center. Includes drawing. SKILLS REQUIRED: Sewing. AUTHOR: TITLE: Do it Yourself Again, Self-help Devices for the Stroke Patient. REF: Book: American Heart Association; p 20. 1969....[More Information]
    
    
21. PEN OR PENCIL HOLDER. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Simple pen or pencil holder for persons unable to grasp pen or pencil. Use 1/2 elastic and cut a length to fit around the thumb and index finger or the thumb and middle finger. Sew the elastic into a loop and three slots for the two fingers and pen. Includes picture and drawing. SKILLS REQUIRED: Sewing. AUTHOR: TITLE: Do it Yourself Again, Self-help Devices for the Stroke Patient. REF: Book: American Heart Association; p 20. 1969....[More Information]
    
    
22. PENCIL GRIPS The Pencil Grips are pen and pencil holders designed for use by individuals with arthritis, fine motor disabilities, grasping disabilities, and other disabilities of the fingers and hand. These contoured, soft rubber grips aid in holding pens, pencils, slim crayons, standard paint brushes, etc. COLOR: Assorted....[More Information]
    
    
23. PENCIL HOLDER (MODEL H73513) The Pencil Holder, model H73513, is a plastic cuff designed to fit around the hand to hold a pencil or pen, assisting individuals with limited manual dexterity or strength. The device consists of a polycarbonate strip with a split tube pencil grip attached to the molded polystryrene hand clip by a flexible vinyl sleeve. DIMENSIONS: Length adjustable from 6 to 7 inches....[More Information]
    
    
24. Pen and Pencil Holder. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to hold pens and pencils in such a way that fingers can be slipped under them to pick them up, for persons with poor pinch, grasp, or hand function. Pictures a holder made of a strip of foam packaging material with grooves cut to hold pens and pencils; this is held in place with double-stick tape or other friction material. SKILLS REQUIRED: Assembly. AUTHOR: Mallik, K; Shaver, E M TITLE: Jobs and Self-Sufficiency REF: Washington DC: George W...[More Information]
    
    
25. Penholder. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Pen or pencil holder for quadriplegic with use of arms but not hands. Penholder made of a piece of aluminum bent like a bracelet or nail brush to fit around the palm with a piece of tubing on one side to hold the writing implement. The aluminum should be wrapped with tape; the pen is held in place with a rubber band. Includes photographs. SKILLS REQUIRED: Metalworking. AUTHOR: Gugerty, J J; Tindall, L W TITLE: Tools, Equipment and Machinery Adapted...[More Information]
    
    
26. RIGHT ANGLE POCKETS (MODELS 1532 & 1533) The Right Angle Pocket, models 1532 and 1533, are utensil or pen holders designed for use by individual with arthritis or limited manual dexterity or gripping ability. A leather cuff (not included) attaches to metal bracket for use with universal cuff. Model 1532 is a single pocket holder that positions utensils or pens at right angle to the palm and turns to the best angle for writing. Model 1533 is a double pocket holder that fits standard and round pens, pencils and tootbrushes. The holders c...[More Information]
    
    
27. SLIM FOAM GRIP The Slim Foam Grip is a pencil holder designed for use by children and adults with upper extremity disabilities. This soft grip is slightly enlarged at one end to provide tactile cues for finger positioning....[More Information]
    
    
28. SLIP GRIPS -------- PROTOTYPE --------- PURPOSE: To design a prototype of a gripping device (Slip Grip) to assist individuals with limited hand mobility to manipulate objects that they would otherwise be unable to use. The product is used by slipping the finger holds over the thumb and forefinger and then snapping objects in to place via the clips located in between these finger holds. At a slight angle, the clip directs objects placed in it downward, giving the user a natural range of motion. When wearing...[More Information]
    
    
29. SLIP-ON WRITING AID The Slip-on Writing Aid is a writing aid that holds a standard pen or pencil in the proper position for writing for people with hand or finger disabilities. The device consists of a loop that slips over the hand and is attached with a wing nut to an extension which parallels the index finger. The extension ends in a loop for holding the pen. The angle of the writing instrument may be adjusted by adjusting the wing nut. Models are available for the right or left hand....[More Information]
    
    
30. SOFT / WRITING DRAWING GRIPS ---"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals with grasping or fine motor disabilities to hold pens, pencils, crayons, or paint brushes. To make these grips, take a 35-millimeter film canisters and cut an "x" in the bottom. The size of the "x" should correspond to the diameter of the writing or drawing implement. Slide the writing or drawing tool through the "x" to create a large gripping surface. The user can hold the tool in a tripod grasp, modified tripod grasp or in a palmar ...[More Information]
    
    
31. SOFT PLASTIC GRIPS The Soft Plastic Grips are pencil holders designed for use by individuals with fine motor and other upper extremity disabilities. Available in two sizes and in a choice of round or triangular shapes, these grips can be used with standard pens or pencils or with the larger primary pencils. SIZES: Large or small. DIMENSIONS: The large models are 3/8-inch in diameter and the small model is .25-inch in diameter....[More Information]
    
    
32. TEXTURED GRIP BALL (MODEL H70858) The Textured Grip Ball, model H70858, is a hand exercise ball with a surface made of small individual bumps and a center hole. There is an internal bell which rings when shaken. The end of the hole may be pushed through with a pencil to create a pencil holder for persons requiring a built-up writing instrument holder. DIMENSIONS: 2 inches in diameter....[More Information]
    
    
33. THERAPY HANDLES (MODEL 6762) Therapy Handles, ##6762, are foam grasping aids for hands. These holders have a 1-inch extension which the thumb can be positioned around. A utensil, pen, pencil, or other instrument can be placed into the extension itself or in the end of the holder, depending on the hand position. An adjustable snap buckle slides along the strap for an individualized fit. An additional vinyl strap that attaches to the therapy handle strap is also included. The additional length allows the strap to be wrapped a...[More Information]
    
    
34. TRI-GLO GRIPS Tri-Glo Grips are a set of 100 pen or pencil holders designed for individuals with fine motor and grasping disabilities. These grips help position the user's hand for writng. Cutouts in the grips permit finger contact with the writing implement. COLOR: Assorted bright colors....[More Information]
    
    
35. TRIANGULAR GRIPS Triangular Grips are pen and pencil holders designed for use by individuals with fine motor disabilities or arthritis. Available in two sizes, these grips can be used with writing implements, crayons, paint brushes, and other utensils. DIMENSIONS: 1 5/8 inches long x 5/16 inch in diameter or 1 5/8 inches long x 7/16 inch in diameter. COLOR: Assorted....[More Information]
    
    
36. TRIGO GRIPS The TriGo Grips are pencil holders designed for use by individuals with fine motor and other upper extremity disabilities. Molded for use by right- or left-handed users, these grips have a unique design which aids in proper finger positioning while allowing the fingers to touch the pencil or pen....[More Information]
    
    
37. TRISOFT CONTOURED TRIANGLE GRIPS The TriSoft Contoured Triangle Grips are pencil holders designed for use by individuals with fine motor and other upper extremity disabilities. These bulb-shaped soft plastic grips slip on to any standard size pen or pencil and have three sides for finger placement. This design provides comfortable finger positioning and prevents the writing utensil from rolling. The textured surface provides tactile cues to the fingertips....[More Information]
    
    
38. UTENSIL HANDLES (MODEL 6760) Utensil Handles, model 6760, are foam holders that fit into palm of the hand. The holders have a hole in the center for eating utensils, personal hygiene items, activity brushes and crayons, and other items. The holders have an anchor strap that goes around the back of the hand, are contoured, and adjustable for fit. These devices may also be used as hand exercisers. SIZES: Small (1-inch diameter x 3 inches) and Large (1.5-inch diameter x 3.75 inches). COLOR: Red, bright blue, or orange....[More Information]
    
    
39. WRITING BIRD The Writing Bird is a pen or pencil holder designed for persons with limited hand coordination or dexterity, arthritis, neurological disabilities, and weak thumb to fingertip pinch. This writing aid requires using an arm to shoulder motion rather than wrist movement with the fingers in any position, and is used by sliding the unit over the paper. The device comes with a retractable pen held in place at the top of the unit. The device may benefit individuals who need to learn to write with the no...[More Information]
    
    
40. WRITING GRIPS (NC21021) Writing Grips, model NC21021, are pen and pencil holders and triangular finger grips designed to facilitate writing for people who have difficulty grasping writing utensils. The soft plastic grips slide over the barrel of any standard pen or pencil and the bulb design provides a built-up grasping area and encourages proper finger positioning....[More Information]
    
    

Page 1 of 1