Products are listed alphabetically.

Page 1 of 2    Next page »

1. AC ADAPTOR (MODEL FRE-103C) --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. --- The AC Adaptor, model FRE-103, is a switch adapter designed to allows a single switch to be used to control an electrical appliance. With this adapter, switches designed to accommodate only battery operated appliances can be used to turn on and off appliances that run on 120 volts AC (wall power). The switch jack is attached to the adapter by a six foot cord. DIMENSIONS: 4.38 x 3.25 x 1.5 inches. WEIGHT: 8 ounces. POWER:...[More Information]
   
   
2. ACCESS KIT SWITCH AND MOUNTING ASSESSMENT KIT --- DISCONTINUED. (Verified 1/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Access Kit Switch and Mounting Assessment Kit is a control switch assessment system including a variety of switch mounting hardware and an assortment of switches designed for use by individuals with upper extremity disabilities. This set includes a Yellow Accessible Switch, a Happy Face Buddy Button, a Red Big Buddy Button, a Grasp Switch, a Micro Light Switch, a Mini Cup Switch, a Pillow Switch, a Green Plate Switch...[More Information]
   
   
3. ACCESS PACK BATTERY ADAPTER AND SWITCH LATCH AND TIMER --- DISCONTINUED. (Verified 1/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Access Pack Battery Adapter and Switch Latch and Timer is a switch latch and battery interface control for toys designed to enable individuals with upper extremity disabilities to operate battery-operated toys and appliances using a single switch. This set includes one Switch Latch and Timer by Tash (see also separate entry) and a Battery Adapter by Access First (see also separate entry). The Battery Adapter is avail...[More Information]
   
   
4. ACCESS PACK BIG BUDDY AND BATTERY ADAPTER --- DISCONTINUED. (Verified 1/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Access Pack Big Buddy and Battery Adapter is a touch switch and battery interface control for toys designed to enable individuals with upper extremity disabilities to operate battery-operated toys and appliances using a single switch. This set includes one Big Buddy Button by Tash (see also separate entry) and a Battery Adapter by Access First (see also separate entry). The Battery Adapter is available in a choice of...[More Information]
   
   
5. ACTIVE STIMULATION PROGRAMMER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Active Stimulation Programmer is a device that allows input from a switch to control the operation of a battery operated or electrical device. The programmer controls the duration of operation of the triggered device for each switch closure (1 to 90 seconds). Three versions are available. PGR-2 is $119.95. PGR-3, which has a built-in switch latch, is $169.95. Active Stimulation Programmer, which has counters for collecting data on the num...[More Information]
   
   
6. AND OR BOX --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. --- The And Or Box is a switch adapter designed to connect two switches either in series or in parallel, and in turn connects to a switch-operated device. When the switches are in parallel, activating either one will turn on the switch-operated device. In series, both switches need to be activated at the same time. The two modes are selected using a switch on top of the box. DIMENSIONS: 2.5 x 3.75 x 1.75 inches. WEIGHT: 4 ou...[More Information]
   
   
7. ATTENDANT BUZZER (MODEL NC-1) --- DISCONTINUED. (Verified 08/04) RETAINED IN DATABASE FOR REFERENCE. --- The Attendant Buzzer, model NC-1, is an audible beeper paging system designed to provide momentary operation with any single switch for individuals with physical, cognitive or sensory disabilities. It emits a high-pitched tone which is audible for 100 feet in a quiet environment. Velcro is provided for mounting to wall, bed wheelchair, etc. POWER: Uses one nine volt battery. DIMENSIONS: Measures 2.5 x 1.75 x 2.75 inches. ...[More Information]
   
   
8. BATTERY ADAPTER --- DISCONTINUED. (Verified 01/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Battery Adapters are battery interface controls for toys designed to enable individuals with upper extremity disabilities to operate battery-powered toys or devices using a single switch. To adapt the toy or device, the copper disk at the end of the adapter is inserted between the battery and the battery contact, the device's control switch is placed in the "on" position, and any single switch with an eighth-inch pl...[More Information]
   
   
9. BATTERY INTERRUPTER (MODELS 630, 630-8, 640, 640-8, 641, 641-8) --- DISCONTINUED. (Verified 03/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Battery Interrupter (formerly Battery Adapter), models 630, 630-8, 640, 640-8, 641, 641-8, is a battery interface control for toys designed to create switch compatibility for non adapted toys for individuals with physical disabilities. It is a cable that fits between any battery-operated toy or device and a switch, permitting the toy or device to be operated by the switch. There are three models available for batter...[More Information]
   
   
10. CABLE ADAPTER (MODEL 11425) --- DISCONTINUED. (Verified 08/2008) RETAINED IN DATABASE FOR REFERENCE. --- Cable adapter box with 5 mini jacks to D9 socket. Interfaces the ##11424 Head Switch Array with Invacare's ##1551 Switch Interface wheelchair controller, the Fortress Commander Interface wheelchair controller, or the Prentke Romich Light Talker. Attendant switches are incorporated into this adapter. ....[More Information]
    
    
11. COMPUTER ACTIVATED ENVIRONMENTAL CONTROL UNIT --- DISCONTINUED. (Verified 04/2009) RETAINED IN DATABASE FOR REFERENCE. --- Environmental Control Unit is a device that connects a computer to a single switch operated device such as a toy. The switch operated device can be computer-activated when used with the proper software (included). COMPATIBILITY: For use on Apple II computers. POWER: 120-volt AC. DIMENSIONS: 2 x 1 x 2 inches....[More Information]
    
    
12. CONNECTOR ADAPTER CA-10 (MODEL 4381) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Switch Connector adapter, connects sound guard and single switch to unidialers....[More Information]
    
    
13. CONNECTOR ADAPTER CA-3 (MODEL 4355) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Switch connector adapter, connects two dual switch with 5 pin DIN plug to equipment having one 5 pin DIN jack....[More Information]
    
    
14. CONNECTOR ADAPTER CA-7 (MODEL 4357) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Switch connector adapter, connects ENCO system to TELCO telephone....[More Information]
    
    
15. CONNECTOR ADAPTER CA-8 (MODEL 4356) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Switch connector adapter, connects sound guard to TELCO telephone....[More Information]
    
    
16. CONNECTOR ADAPTER CA-9 (MODEL 4359) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Switch Connector adapter, connects sound guard and dual switch with 5 pin DIN connector to TELCO telephone....[More Information]
    
    
17. COUNTER MODULE (MODEL 560, 560-8) --- DISCONTINUED. (Verified 04/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Counter Module, model 560 and 560-8, is a control switch assessment system designed to count the number of times a switch has been activated for individuals with a physical, cognitive or developmental disorder. The module is connected between the switch and the device activated by the switch. An electronic digital counter displays the number of activations. The Counter Module uses large (1/4-inch) phone connectors; ...[More Information]
    
    
18. CRESTWOOD CONVERTER SWITCH (MODEL 3088) --- DISCONTINUED. (Verified 12/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Crestwood Converter Switch, model 3088, is a switch adapter that converts any momentary switch into a continuous latch switch, both with 1/8-inch receptacles. By touching any momentary switch once, the attached converter switch will turn on connected TVs, radios, tape recorders, toys, etc., and a second touch turns the device off....[More Information]
    
    
19. FOUR TO ONE ADAPTER (MODEL 2355) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Operates in conjunction with power module, control and actuator to convert traditional powered wheelchair for specialized switch operation. Combines four individual single switch type actuators to produce the equivalent of one multiple switch type actuator (e.g., a joystick). Offers the benefits of direct selection to those persons lacking the capability to operate a single, multiple switch type actuator. Used with a 3060 system....[More Information]
    
    
20. INVERTER MODULE (MODEL 570) --- DISCONTINUED. (Verified 07/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Inverter Module, model 570, is a control switch interface designed to reverse the action of a connected switch. When a device and a switch are connected to the module, removing pressure from the switch causes activation and pressing the switch causes deactivation.. This unit is equipped with a combination 0.25- and 1/8-inch jack....[More Information]
    
    
21. INVERTOR MODULE --- DISCONTINUED. (Verified 04/2009) RETAINED IN DATABASE FOR REFERENCE. --- Invertor Module is a control switch accessory designed to reverse switch operation for individuals with physical, cognitive or neurological disabilities. The Invertor Module connects between a single switch and a switch-operated device (such as a toy). When the switch is not being activated, the toy stays on. When the switch is activated, the toy turns off. It comes with the standard 0.25 inch jack and plug and can be o...[More Information]
    
    
22. JUDY LYNN PC ADAPTER --- DISCONTINUED. (Verified 2/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Judy Lynn PC Adapter is a switch adapter designed to connect the switch to the computer's serial or joystick port for persons with physical disabilities. This enables the user to actively run all of the Judy Lynn Software programs with a switch. The adapter fits 1/4 inch and 1/8 connectors. COMPATIBILITY: IBM PC or any related compatibles....[More Information]
    
    
23. LATCH BOX --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. ---The Latch Box is an electrical relay switch adapter designed to convert a switch from a momentary status switch to an on/off switch. A switch and appliance or reinforcing device (such as a toy) are connected to the Latch Box; activating the switch turns the appliance or device on until the switch is activated a second time. The Latch Box has a 3.5 millimeter input jack and a 3 foot output cord with a 3.5 millimeter plug. ...[More Information]
    
    
24. MACINTOSH SWITCH INTERFACE --- DISCONTINUED. (Verified 10/2000) RETAINED IN DATABASE FOR REFERENCE. --- The Macintosh Switch Interface is a control switch interface unit designed to support multiple switches and switch-ready computer programs. The unit allows the user to connect up to five switches and is designed to plug into the ADB port on a computer keyboard. It enables the user to turn pages and select buttons. It also includes a tutorial for making HyperCard scanning buttons. COMPATIBILTY: For use with with Macintos...[More Information]
    
    
25. PLAYMAGIC (MODELS 617) --- DISCONTINUED. (Verified 08/2008) RETAINED IN DATABASE FOR REFERENCE. --- ...[More Information]
    
    

Page 1 of 2    Next page »