Tongue Switch
Products are listed alphabetically.
Page 1 of 1
-
HEAD CRADLE CONTROLLER KIT (MODEL HCP-1K) --- DISCONTINUED. (Verified 02/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Head Cradle Controller Kit is designed to allow custom mounting of the tongue/lip controller active components on a head cradle, giving proportional control of the wheelchair. The user's head rests in the molded cradle and the controller is mounted on the cradle so that is moves with the user's head without requiring mounting on the head. The cradle is suspended from the wheelchair frame by rubber bands in a trampol...[More Information]
-
NEWABILITIES UCS 1000 WITH TONGUETOUCH KEYPAD --- DISCONTINUED. (Verified 4/2011) RETAINED IN DATABASE FOR REFERENCE. --- The newAbilities UCS 1000 with TongueTouch KeyPad is a modular environmental control unit (ECU) controlled by the touch of the tongue on any of 9 buttons located on a user interface similar to an ordinary orthodontic retainer. The system consists of a TongueTouch Keypad (TTK), FingerTouch Keypad (FTK), an Interactive Menu Display (IMD), Keypad Receiver, and a wheelchair-mounted Universal Controller. TONGUETOUCH KEYPAD: T...[More Information]
-
SCI TONGUE/LIP CONTROLLER (MODEL TLP-1) --- DISCONTINUED. (Verified 08/04) RETAINED IN DATABASE FOR REFERENCE. --- The SCI Tongue/Lip Controller, model TLP-1, is a toungue lever switch designed to control powered wheelchairs for those with little or no head and neck mobility. The TLP-1 is worn on the head and the controller and the selector switch are located near the mouth so very small movements of the tongue and/or lips can activate it. The TLP-1 may be used with the DU-IT SCI (spinal cord injury) class wheelchair control systems f...[More Information]
-
TONGUE SWITCH --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- tongue switch. Hatching mechanism. Requires minimal tongue pressure. Cord and 1/4 inch jack type plug included....[More Information]
-
TONGUE SWITCH (MODEL 955, 955-8) --- DISCONTINUED. (Verified 7/2004) RETAINED IN DATABASE FOR REFERENCE. --- Tongue Switch is a tongue lever switch activated by slight lateral tongue movements against a protruding spring lever for individuals with severe disabilities. It can be mounted on the included gooseneck or on a flat surface using double sided tape. Three models are available: one without the gooseneck mounting stand ($26), one single switch with gooseneck ($49), and one double switch with gooseneck ($52)....[More Information]
-
TONGUE SWITCH (MODEL TS-2C) --- DISCONTINUED. (Verified 09/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Tongue Switch, model TS-2C, is a tongue lever switch designed to require minimal pressure for individuals who are quadraplegics. The sensitive, small movement switch can be activiated by slight tongue, nose, chin, cheek, finger movement. The switch comes complete with gooseneck and table mounting hardware. An audible click sounds on activation. The switch requires less than one ounce of force and activates after abo...[More Information]
-
TONGUE SWITCH (MODELS 1000, 1000-8, 1010, 1010-8, 1020, & 1020-8) --- DISCONTINUED. (Verified 7/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Tongue Switch is a tongue lever switch designed to enable individuals with upper extremity disabilities to operate switch-adapted toys and appliances. These switches can be activated by a slight lateral movement against the spring lever. The switch can be mounted on a gooseneck or mounted on a flat surface using double-sided tape. Models 1000 and 1000-8 are single switches mounted on a gooseneck and models 1010 and 1...[More Information]
-
TONGUE TOUCH SWITCH (MODELS 723-A, 723-B, 723-C, & 723-D)
--- DISCONTINUED. (Verified 04/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Tongue Switch is a tongue lever switch designed for use by individuals with severe physical disabilities or spinal cord injury. Touching the polished ends of this adjustable switch with the tongue enables control of any connected device. The Tongue switch is available in one (model 723-A), two (model 723-B), four (model 723-C) or eight-switch (model 723-D) versions. This switch can be used with environmental contro...[More Information]
Page 1 of 1

