Products are listed alphabetically.

Page 1 of 2    Next page »

1. APPLE SWITCH INTERFACE --- DISCONTINUED. (Verified 2/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Apple Switch Interface is a switch adapter for Apple Computer designed to create computer access through use of a switch for individuals with a physical disability. The Switch Interface allows you to connect one or two switches to the 3.5 millimeter jacks and run software written for single or dual switch input. It accepts a switch with standard 1/8 inch miniplug and includes a Dual Lock mounting for attaching to the...[More Information]
   
   
2. BATTERY ADAPTERS. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Battery adapter cable. One end attaches to battery. Connecter at other end attaches to switch. Allows operation of toys or battery operated devices by various switches or modules. Specify battery size: AA, C or D....[More Information]
   
   
3. CONTROL UNIT (MODEL 102) --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- Control Unit Model 102 (internally redesigned from Model 101) is a training device which adjusts the operation of a switch-controlled appliance. A single switch (low power) and the desired appliance (120 volts AC, or battery operated using an adapter (included)) are both connected to the Control Unit. The user can control how long the switch must be activated before the appliance will come on (from one second to ten minut...[More Information]
   
   
4. CONTROL UNIT (MODEL 201) --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- Control Unit Model 201 is a device that controls the way in which a switch activates high or low power electrical appliances. A single (low power) switch is plugged into the Control Unit. Appliances that can be controlled by the Unit include low power devices (such as modified battery-powered toys) or appliances that run on household power (120 volts AC). The Control Unit allows the user to set: the amount of time the...[More Information]
   
   
5. COUNTER MODULE (MODEL 560, 560-8) --- DISCONTINUED. (Verified 04/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Counter Module, model 560 and 560-8, is a control switch assessment system designed to count the number of times a switch has been activated for individuals with a physical, cognitive or developmental disorder. The module is connected between the switch and the device activated by the switch. An electronic digital counter displays the number of activations. The Counter Module uses large (1/4-inch) phone connectors; ...[More Information]
   
   
6. DUAL CHANNEL LATCHING SWITCH INTERFACE --- DISCONTINUED. (Verified 06/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Dual Switch Latching Interface connects between single switches and a battery operated devices such as a toy, radio or tape recorder to change the operation of the switch. When connected, the Dual Switch latching interface causes the switch to operate in an on/off fashion. Two separate and independent devices may be controlled from two different switches. Each input requires a 3.5mm mini-phone plug connector. Each o...[More Information]
   
   
7. DUAL SWITCH MODULE --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Dual Switch Module is a module for training ambidexterity or cooperation. Two switches and one device may be connected to the module; both switches must be activated at the same time by one or two users for the device to operate....[More Information]
   
   
8. DUOMODE SIMPLEX CONTROL (MODEL 2440) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Two mode, direct select control used to operate a wheelchair and power recliner or other device from a multiple switch actuator. Auditory feedback during mode selection mounted on cover of power module with double faced foam tape. Includes cable for connections to power module and to the cables from the actuator and mode Z interface. Depending upon the type of interface used, an interconnecting cable may be required. To operate wheelchair...[More Information]
   
   
9. ELECTRALINK --- DISCONTINUED. (Verified 01/2004) RETAINED IN DATABASE FOR REFERENCE. --- The ElectraLink is a control switch interface unit designed to enable individuals with upper extremity disabilities to operate electric appliances using a single switch. To use this device, the user plugs the ElectraLink into a standard wall outlet, plugs a single switch into the appropriate ElectraLink receptacle, and plugs in the appliance to be controlled. The appliance's control should be switched to the "on" positi...[More Information]
   
   
10. FORTRESS COMMANDER --- DISCONTINUED. (Verified 6/96) RETAINED IN DATABASE FOR REFERENCE. --- Powered wheelchair controller for Fortress 650FS or 655FS powered wheelchairs. Designed for individuals with limited hand function. Control and scanning device acts as interface for power chair and an ability switch that can be either a short stroke chin operated 5 position microswitch or a 5 position wafer switch activated by the touch of a hand or finger. Allows user to turn wheelchair control on or off, select one of 3 ...[More Information]
    
    
11. FOUR SMART SWITCHES --- DISCONTINUED. (Verified 03/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Four Smart Switches unit is a control switch interface desighed to convert four individual switches into four relay outputs to control four different battery-operated or switch-activated toys, lights, buzzers, etc. for individuals with upper extremity disabilities. Each of the four inputs can be individually set up to operate momentary, latching, or timed mode. In timed mode, the length of switch activation can be s...[More Information]
    
    
12. INTERFACE POWER CONTROL. --- DISCONTINUED. (Verified 06/2006) RETAINED IN DATABASE FOR REFERENCE. --- Interface Power Control unit provides electric control of wheelchair for person using various control switches. Includes ramped speed controller for linear acceleration from zero to a preset maximum speed, adjustable manually. Motor control board decodes logic signals from switch, providing Pulse Width Modulation to drive and reverse motors. Interface decoder board allows use of Hugh MacMillan Medical Centre Touch Plate...[More Information]
    
    
13. INVERTER MODULE (MODEL 570) --- DISCONTINUED. (Verified 07/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Inverter Module, model 570, is a control switch interface designed to reverse the action of a connected switch. When a device and a switch are connected to the module, removing pressure from the switch causes activation and pressing the switch causes deactivation.. This unit is equipped with a combination 0.25- and 1/8-inch jack....[More Information]
    
    
14. INVERTOR MODULE --- DISCONTINUED. (Verified 04/2009) RETAINED IN DATABASE FOR REFERENCE. --- Invertor Module is a control switch accessory designed to reverse switch operation for individuals with physical, cognitive or neurological disabilities. The Invertor Module connects between a single switch and a switch-operated device (such as a toy). When the switch is not being activated, the toy stays on. When the switch is activated, the toy turns off. It comes with the standard 0.25 inch jack and plug and can be o...[More Information]
    
    
15. IRLINK (MODELS IRLINK1, IRLINK2, & IRLINK 5) --- DISCONTINUED. (Verified 03/2009) RETAINED IN DATABASE FOR REFERENCE. --- The IRLink is a control switch interface designed for use by individuals with uipper extremity disabilities who use wheelchairs. This device enables users to activate switch-adapted devices remotely, eliminating the need to physically activate the switch or to be connected to the switch with a wire for activation from a distance. This unit consists of two components, a transmitter and a receiver. The transmitter mounts ...[More Information]
    
    
16. MACINTOSH SWITCH INTERFACE --- DISCONTINUED. (Verified 10/2000) RETAINED IN DATABASE FOR REFERENCE. --- The Macintosh Switch Interface is a control switch interface unit designed to support multiple switches and switch-ready computer programs. The unit allows the user to connect up to five switches and is designed to plug into the ADB port on a computer keyboard. It enables the user to turn pages and select buttons. It also includes a tutorial for making HyperCard scanning buttons. COMPATIBILTY: For use with with Macintos...[More Information]
    
    
17. MULTI SENSORY MOTIVATOR --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. --- Multi Sensory Motivator includes 3 battery oerated toys and 7 pads with different textures. Includes three 1/8 phone jacks so any switch can be used with module. Requires 6 D size batteries. Can be used to operate toys, environmental control units, radios, or single switch programs on a computer. A wide variety of toys are available that can be used with the Motivator, $85.00 to $15.00. ....[More Information]
    
    
18. MULTI SENSORY MOTIVATOR MINI MODULE --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. --- Interface module can be used with textured switches to operate toys, environmental control units, computers, etc. Includes two textured pads and one toy. A wide variety of other accessories are available....[More Information]
    
    
19. OMNI INTERFACE (MODEL 2245) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Operates in conjunction with a power module, multiple mode type control, and an actuator to convert a traditional powered wheelchair for specialized switch operation. This interface is designed to permit operation of an Omni communicator within this system. Mounts on the rear of the omni with double faced foam tape. Plugs into both the power and logic jacks on the Omni and to the mode 2 output of the control. Interface then supplies power...[More Information]
    
    
20. ONE-SWITCH SINGLE-APPLIANCE UNIT (MODEL 1490 & 1490-8) --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The One-Switch Single-Appliance Unit is a control switch interface unit designed to enable individuals with physical disabilities do operate appliances such as televisions, lamps, radios, and stereos using a single switch. The appliance to be controlled is plugged into the receiver and activated using the remote transmitter from a distance of up to 30 feet. The transmitter can be activated with or without a capability swi...[More Information]
    
    
21. PC SWITCH INTERFACE ---DISCONTINUED. (Verified 12/99) RETAINED IN DATABASE FOR REFERENCE. --- Th PC Switch Interface is a control switch interface unit designed to provide switch operation for software designed for switch control for individuals who have limited upper limb mobility. This unit allows for the connection of one to four switches which each controls a different keyboard function. It is compatible with a variety of commercially available PC-compatible software programs. It has a 25 pin interface. OPTIONS...[More Information]
    
    
22. PLAYMAGIC (MODELS 617) --- DISCONTINUED. (Verified 08/2008) RETAINED IN DATABASE FOR REFERENCE. --- ...[More Information]
    
    
23. PLUG MOUNTED MODULE (MODEL 1493) & WALL MOUNTED MODULE (MODEL 1494) --- DISCONTINUED. (Verified 7/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Plug Mounted Module, model 1493, is a control switch interface unit designed to control appliances up to 12.5 amps. The appliance to be controlled is plugged into the unit and the unit is plugged directly into a wall electrical socket. Radios, televisions, or lamps up to 500 watts may then be operated from a distance. The Wall Mounted Module, model 1494, replaces standard wall outlets; appliances and lamps up to 1800...[More Information]
    
    
24. POWER MODULE (MODEL 2210) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Core of control system to convert traditional powered wheelchair for switch control. Compatible with most 24 volt powered chairs. Operates with an actuator and control to process the power supplied by the wheelchair batteries to provide controlled power to the wheelchair drive motors and other system components. Features forward latch/speed control function to allow continuous forward wheelchair operation without maintaining continuous op...[More Information]
    
    
25. POWER MODULE (MODEL 2210-2) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Core of control system to convert traditional powered wheelchair for switch control. Compatible with most 24 volt powered chairs. Operates with an actuator and control to process the power supplied by the wheelchair batteries to provide controlled power to the wheelchair drive motors and other system components. Features forward latch/speed control function to allow continuous forward wheelchair operation without maintaining continuous op...[More Information]
    
    

Page 1 of 2    Next page »