Products are listed alphabetically.

« Previous page    Page 2 of 2

26. POWERLINK 2 ---DISCONTINUED. (Verified 12/99) RETAINED IN DATABASE FOR REFERENCE. --- The PowerLink 2 is a control switch interface unit designed to allow the user to operate two electrical appliances simultaneously (up to a 1500 watt capacity) with a switch. The device has three modes of control: Direct, which keeps appliances turned on while the switch is activated; Timed, which keeps devices turned on for 1 second to 60 minutes each time the switch is activated; and Latch, which provides one-touch on and...[More Information]
    
    
27. POWERLINK 3 CONTROL UNIT --- DISCONTINUED. (Verified 12/2009) REPLACED BY POWERLINK 4 (SEE SEPARATE ENTRY) RETAINED IN DATABASE FOR REFERENCE. --The PowerLink 3 Control Unit is a control switch interface unit designed to allow the user to operate two electrical appliances simultaneously with a switch. The device has four modes of control: Direct, which keeps appliances turned on while the switch is activated; Timed, which keeps devices turned on from one second to 60 minutes each time the switch is activated; Latch, wh...[More Information]
    
    
28. SINGLE-SWITCH MULTI APPLIANCE UNIT (MODEL 1492) --- DISCONTINUED. (Verified 7/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Single-Switch Multi Appliance Unit, model 1492, is a control switch interface unit designed to enable eight alternating current appliances to be controlled with a single switch by individuals with mobility and other physical disabilities. When the switch is pressed, a row of lights on this cordless unit indicates which appliances are on or off. By holding the switch down, the user can scan from one light to the next ...[More Information]
    
    
29. SLIDE PROJECTOR CONTROL --- DISCONTINUED (VERIFIED 6/96) RETAINED IN DATABASE FOR REFERENCE. --- The Slide Projector Control is a control switch interface unit designed to link a single switch with most models of Kodak Carousel slide projectors. The devices 5-prong plug connects to the remote control input port on the slide projector. The switch must be activated, released, and reactivated to advance a single slide....[More Information]
    
    
30. SLIDE PROJECTOR CONTROL ADAPTER (MODEL 1-SPC2) --- DISCONTINUED. (Verified 10/2002) RETAINED IN DATABASE FOR REFERENCE. --- The Slide Projector Control Adapter, model 1-SPC2, is a control switch interface unit designed for use by indiviudals with limited upper extremity mobility. This unit attaches to the slide projector control, providing users a larger target for controlling any Caramate or Kodak Carousel projector. For users who cannot easily release a switch, the manufacturer suggests adding a Switch Latch and Timer (see separate entry) ...[More Information]
    
    
31. SMALL APPLIANCE RECEIVER & CORDLESS RECEIVER --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Small Appliance Receiver and the Cordless Receiver are control switch interface units designed to enable switch-adapted toys and appliances to be operated by the Cordless Big Red Switch (see separate entry) for individuals with upper extremity disabilities. The Small Appliance Receiver ($33.99) accepts low-wattage (under 500 watts) appliances with two-prong plugs, such as fans, lamps or radios. The Cordless Receiver ...[More Information]
    
    
32. SYMBI-KEY COMPUTER INTERFACE --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Symbi-Key Computer Interface is a single switch keyboard modification designed for use by individuals with severe or profound disabilities. This unit installs quickly and works with any switch-accessible or commercially available software and can be used with Windows and DOS applications.Symbi-Key allows up to 27 different switch setups to be stored, enabling it to be used with a variety of different programs without ...[More Information]
    
    
33. TRIMODE CONTROL (MODEL 2330) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Direct select, three mode control used with multiple switch actuator for operating a wheelchair and interfaces for two additional devices such as a power recliner and a communicator. Features front panel with indicator lights to show mode selected and direction, a knob to adjust control's scanning speed, and a power switch. Auditory feedback during mode selection. Emergency stop switch to immediately halt wheelchair or interfacing devices...[More Information]
    
    
34. TWO-SWITCH SINGLE-APPLIANCE UNIT (MODEL 1491 & 1491-8) --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Two-Switch Single-Appliance Unit is a control switch interface unit designed to enable individuals with physical disabilities do operate appliances such as televisions, lamps, radios, and stereos using one or two single switches. The appliance to be controlled is plugged into the receiver and activated using the remote transmitter from a distance of up to 30 feet. With one switch, the appliance is turned on with the f...[More Information]
    
    
35. VIBRATION SWITCH (MODEL VBS-102) --- DISCONTINUED. (Verified 02/2013) RETAINED IN DATABASE FOR REFERENCE. ---The Vibration Switch, model VBS-102, is a touch switch designed to activate any battery operated device by tapping on the surface that the switch is contact with for individuals with with limited movement or motor control. Essentially, the Vibration Switch turns any table or counter top into a tap sensitive switch. With variable sensitivity, the device requires as little as a fingernail tap or as much as a hard pound dir...[More Information]
    
    
36. WALL SWITCH MODULE (MODEL 1497) --- DISCONTINUED. (Verified 7/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Wall Switch Module, model 1497, is a control switch interface unit designed to control overhead and built-in incandescent lights up to 300 watts. This unit features a push on/off switch and dimmer. The on/off function may also be activated remotely....[More Information]
    
    

« Previous page    Page 2 of 2