Products are listed alphabetically.

« Previous page    Page 2 of 3    Next page »

26. MAGIC ARM MOUNTING SYSTEM (MODEL 1631) The Magic Arm Mounting System is mounting hardware for control switches to be placed in virtually any position for individuals with physical disabilities. The adjustable arm attaches to a table or wheelchair by means of a one-piece base clamp. The arm can be further adjusted by flipping the lever at the joint of the arm, moving the arm into the desired position, and then flipping the lever back to lock it in place. The Magic Arm Mounting System comes with threaded circular and rectangular platfo...[More Information]
    
    
27. MICROPHONE TUBING (SERIES 2000) The Microphone Tubing, series 2000, is switch mounting hardware designed to aid in attaching switches to wheelchairs and workstations. Available models include 5/8-inch 27 male to male, 5/8-inch 27 male one end, flex tube (gooseneck) 5/8-inch 27 male and female, 45-degree angle tube 5/8-inch 27 male and female, or 90-degree angle tube 5/8-inch 27 male and female. DIMENSIONS: The 5/8-inch 27 male to male is sold in three-, six-, or 12-inch lengths. The 5/8-inch 27 male one end is sold in 21-inch ...[More Information]
    
    
28. MIDLINE JOYSTICK MOUNTING BRACKET The Midline Joystick Mounting Bracket is a powered wheelchair controller bracket designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This bracket enables the user to place a wheelchair joystick from the severe left or right to midline. This mounting bracket also allows the joystick to be flipped out of the way for transfers or when not in use....[More Information]
    
    
29. MIGHTY MOUNT The Mighty Mount is switch mouting hardware designed to optimally position a single switch for a user with physical disabilities. This unit may be used with most popular switches and includes an anchoring clamp, a telescoping and angling arm, and a full range switch platform. Swiches attach using screws or Velcro and can be positioned for use with the hand, the chin, or the knee....[More Information]
    
    
30. MODULARHOSE.COM ASSISTIVE TECHNOLOGY DOUBLE KIT (MODEL 90655) The ModularHose.com Assistive Technology Double Kit, model 90655, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 6 feet of...[More Information]
    
    
31. MODULARHOSE.COM ASSISTIVE TECHNOLOGY DOUBLE SPRING CLAMP KIT (MODEL 90674) The ModularHose.com Assistive Technology Double Spring Clamp Kit, model 90674, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a 4 x 6 inch plat...[More Information]
    
    
32. MODULARHOSE.COM ASSISTIVE TECHNOLOGY KIT (MODEL 90650) The ModularHose.com Assistive Technology Kit, model 90650, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 3 feet of Loc-Li...[More Information]
    
    
33. MODULARHOSE.COM ASSISTIVE TECHNOLOGY KIT PLUS (MODEL 90652) The ModularHose.com Assistive Technology Kit Plus, model 90652, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 6 feet of L...[More Information]
    
    
34. MODULARHOSE.COM ASSISTIVE TECHNOLOGY KIT WITH TWO PLATES (MODEL 90654) The ModularHose.com Assistive Technology Kit with Two Plates, model 90654, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes ...[More Information]
    
    
35. MODULARHOSE.COM ASSISTIVE TECHNOLOGY SPRING CLAMP KIT (MODEL 90673) The ModularHose.com Assistive Technology Spring Clamp Kit, model 90673, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a 4 x 6 inch plate, 2 5.75...[More Information]
    
    
36. MODULARHOSE.COM AT STARTER KIT (MODEL 90680) The ModularHose.com AT Starter Kit, model 90680, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes with all the common parts used in the assistive tec...[More Information]
    
    
37. MODULARHOSE.COM ROUND TUBE CLAMP KIT (MODEL 90750) The ModularHose.com Round Tube Clamp Kit, model 90750, is a computer or communicator mounting kit for wheelchair or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The kit is intended to be used with Loc-Line 1-inch or 0.88-inch diameter tubing. Plates are made of stainless steel. The kit includes five-piece round tube clamp with knob, Loc-Line connector, Loc-Line double socket f...[More Information]
    
    
38. MODULARHOSE.COM SPRING CLAMP KIT WITH PLATE 1 FOOT (MODEL 90665) The ModularHose.com Spring Clamp Kit with Plate 1 Foot, model 90665, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a round plate connected to a ...[More Information]
    
    
39. MODULARHOSE.COM SPRING CLAMP KIT WITH PLATE 2 FEET (MODEL 90667) The ModularHose.com Spring Clamp Kit with Plate 2 Feet, model 90667, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a round plate connected to a ...[More Information]
    
    
40. MOUNTING PLATES Mounting Plates are switch mounting hardware designed to attach AbleNet switches, other control switches, clipboards, craft projects, book stands, cameras, toys and games, and other items to the Universal Switch Mounting System or the Slim Armstrong Mounting System (see separate entries). Available models include the Small Triangular Plate for the Jelly Bean Switch, LITTLEmack/LITTLE Step-by-Step, and Step-by-Step with levels, the Large Triangular Switch for the Big Red Switch, Cordless Big Red ...[More Information]
    
    
41. MOUNTING SWITCH MOUNT (MODEL A73) The Mounting Switch Mount, model A73, is switch mounting hardware for the Mounting Switch (see separate entry). This mount is lgihtweight and permanent, designed for placement on a wheelchair for an individual user. The mounting kit includes a 1/4-inch mounting rod, and a wheelchair clamp with a 1/4-inch rod adapter. Instruction included....[More Information]
    
    
42. MULTIMODE INTERFACE (MODEL 3420) Permits the use of proportional or switch actuators to operate an Everest & Jennings power wheelchair plus additional devices such as a power recliner, environmental control system, computer and/or communicator. Two wheelchair operating modes include adjustments for speed, acceleration and deceleration. Additional adjustments vary proportional joystick throw (sensitivity), set the veer rate (steering amount) when using a switch actuator, and select momentary and/or latching (continuous) wheelcha...[More Information]
    
    
43. MULTIMODE INTERFACE (MODEL 3470) Permits the use of proportional or switch actuators to operate a Quickie power wheelchair plus additional devices such as a power recliner, environmental control system, computer and/or communicator. Two wheelchair operating modes include adjustments for speed, accleration and deceleration. Additional adjustments vary proportional joystick throw (sensitivity), set the veer rate (steering amount) when using a switch actuator, and select momentary and/or latching ( continuous) wheelchair drive. Tw...[More Information]
    
    
44. NEW MAGIC ARM MOUNTING SYSTEM (MODEL 5050) The New Magic Arm Mounting System, model 5050, is switch mounting hardware designed to mount switches or communication boards to a wheelchair, table, or bed frame. The adjustable arm attaches to a table or wheelchair by means of a one-piece base clamp. The arm can be further adjusted by flipping the lever at the joint of the arm, moving the arm into the desired position, and then flipping the lever back to lock it in place. The System comes with threaded circular and rectangular platforms that a...[More Information]
    
    
45. PAD MOUNTS FOR SENSORS (MODELS SM-SP, SM-MP, & SM-LP) Mounts for Sensor Pads are switch mounting hardware designed for use by individuals with severe physical disabilities or spinal cord injury. These pad can be used to mount non-adjustable sensors (sold separately) and maintain a range of touch to 0.25-inch above the surface. SIZES: Spot, medium, and long. DIMENSIONS(WxL): The spot pad is 2 x 2 inches, the medium pad is 2 x 4 inches, and the long pad is 2 x 6 inches....[More Information]
    
    
46. PROFILER-LITE MOUNTING SYSTEM The Profiler-Lite Mounting System is a wheelchair mounting kit for communicators or switch mounting hardware. This system mounts to wheelchairs, walkers, hospital beds, strollers, or tables with square, oblong, or round tubing. This system accommodates lightweight communicators and most switches and supports up to five pounds, including pressure on the device. The unit can be mounted on the right or the left side and the universal base mount can be adjusted 360 degrees from front to back and 180...[More Information]
    
    
47. QUICK DISCONNECT (MODELS 2005, 2006, & 2032) Quick Disconnects are switch mounting hardware that allows an entire switch mounting assembly to be removed and re-installed on a wheelchair without repositioning it. To use the quick disconnects, the user simply bends the rod to the desired position and then is able to remove and reinstall the switch without having to reposition the rod. With two units, one headswitch assembly can be quickly transferred to another wheelchair. Model 2032 is a clamp and rod assembly. Model 2005 is a push-button 5...[More Information]
    
    
48. ROD ADAPTERS (MODELS 2070, 2071, & 2072) The Rod Adapters are switch mounting hardware designed to aid in attaching switches to wheelchairs or workstations. Model 2070 is 0.25-inch to 3/8-inch rod to 0.25-inch 20 F thread. Model 2071 is 3/8-inch to 0.5-inch rod to 0.25 20 F thread. Model 2072 is 0.5-inch to 5/8-inch rod to 0.25-inch 20 F thread....[More Information]
    
    
49. ROUND FLANGE (MODEL 2003) Round Flange, model 2003, is switch mounting hardware designed to aid in attaching switches to wheelchairs and workstations. This flange is 5/8-inch 27 female. DIMENSIONS: The base is 1.75 inches in diameter....[More Information]
    
    
50. SENSITRAC FLAT PAD The Sensitrac Flat Pad is a suction pad mounting system designed for use by individuals with spinal cord injury or neurological disabilities, upper extremity disabilities, or fine motor disabilities. This micro pad can be used to hold ABLENet switches, buttons, touch pads and small communication devices up to 6 inches wide with flat bottoms. It can also be used to stop devices from moving when a user with uncontrolled movement hits the device. The pad consists of a hard plastic cover with Velcro...[More Information]
    
    

« Previous page    Page 2 of 3    Next page »