Products are listed alphabetically.

« Previous page    Page 3 of 3

51. SENSITRAC FLAT PAD WITH 180 DEGREE FLIPPER ARM The Sensitrac Flat Pad with 180 Degree Flipper Arm is a suction pad system with an adjustable angle mounting arm designed for use by individuals with communication, neurological, or upper extremity disabilities or spinal cord injury. This micro suction pad system is designed to hold switches and lightweight devices that require vertical mounting for better access. This mount can accommodate devices up to 6 x 6 inches and weighing up to two pounds. The arm adjusts 180 degrees front to back. The d...[More Information]
    
    
52. SENSITRAC FLAT PAD WITH 360 DEGREE ANGLE ADJUSTABLE ARM The Sensitrac Flat Pad with 360 Degree Angle Adjustable Arm is a suction pad system with an adjustable-angle mounting arm designed for use by individuals with communication, neurological, or upper extremity disabilities or spinal cord injury. This micro suction pad system is designed for switches and lightweight devices that require multiple positioning angles for better access. It can hold devices measuring up to 6 x 6 inches and weighing up to two pounds. The arm adjusts 360 degrees around and...[More Information]
    
    
53. SOFTLINE COLLAR & BRIDGE KIT (MODEL 32685) The Softline Collar & Bridge Kit, model 32685, is a control switch accessory for mounting hardware designed to secure and position wheelchair controls for the user. The device includes a breastplate with a bridge assembly, including plastic spacers to help position the control unit at the proper distance from the breastplate. The kit is designed to be configured and attached in any way that best suits the user with any or all of the following included pieces: 2 trimable hook-n-loop straps, 4 pre...[More Information]
    
    
54. SPECIAL SWITCH MOUNTING KIT (MODEL 2100) The Special Switch Mounting Kit, model 2100, is switch mounting hardware designed to aid in mounting and positioning switches on workstations and wheelchairs. This kit includes a Wheelchair Mounting Clamp with Rod, two microphone tubes, a Circular Switch Mounting Plate, a Rectangular Switch Mounting Plate, and three lengths of gooseneck (see separate entry). DIMENSIONS: The Rod is 3/8 inch in diameter x 18 inches long. The microphone tubes are 5/8 inch in diameter x 6 inches long. The gooseneck ...[More Information]
    
    
55. STAY PUT EASEL (MODEL 1484) The Stay Put Easel, model 1484, is an easel designed for use with individuals with emotional or neurological disabilities. A switch, communicator, toy, or other device is secured to the easel or plate with duolock (extra-strong Velcro) and the easel is clamped to a lap tray or table to prevent the user from throwing the device. OPTIONS: Sets of C-clamps are available separately. DIMENSIONS (LxWxH): 13 x 12 x 10.5 inches. ...[More Information]
    
    
56. STEALTH ULTRA HEADREST (MODEL SM-SU200) The Stealth Ultra Headrest, model SM-SU200, is a combination wheelchair headrest and switch mounting hardware designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. The sub occipital component aids the user in finding the midline. The two lateral swing-away components can be used for sensor mounting and a sensor can also be mounted in the backpad. ...[More Information]
    
    
57. SURELOCK MIDLINE SWINGAWAY SYSTEM (MODEL 32691) The Surelock Midline Swingaway System, model 32691, is a lightweight control switch accessory for mounting hardware designed to secure and position wheelchair controls for the user. The entire system is can be mounted to either the right or left vertical bar of a wheelchair with 7/8-inch frame tubing, or it can be mounted on either the back post or armrest of a wheelchair or connected to a multimount chair with a multimount adaptor clamp. An inner extension bar and outer extension tube allow fo...[More Information]
    
    
58. SURFACE MOUNTING CLAMP (MODEL 1610) The Surface Mounting Clamp (model 1610) is switch mounting hardware designed to allow devices with 3/4-inch diameters to be clamped to flat surfaces such as wheelchair trays, table tops, etc....[More Information]
    
    
59. SWING AWAY MOUNT (MODEL SM-SAM230) The Swing Away Mount, model SM-SAM230, is switch mounting hardware designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This mount attaches directly to a wheelchair armrest. With the pull of a lever the arm swings away for removal when not in use. This mount can be used with proximity sensors or mechanical switches (not included). ...[More Information]
    
    
60. SWINGAWAY MOUNTING KIT (MODEL 3150-1) Mounting system for the 3185 joystick for chin oepration. Includes a 12 by 18 inch right angle mounting rod, custom sizes or bends can be provided. A 1/2 inch stainless steel mounting rod fits into a 3/4 inch vertical shaft and a swingaway strap clamp for attachemnt to a standard 7/8 inch diameter wheelchair/power recliner back bar. Permits the joystick to be moved away from the user by an attendant and returned to its original position without the need to readjust the mounting apparatus....[More Information]
    
    
61. SWINGAWAY MOUNTING KIT (MODEL 3205-2) Unsed for mid-line mounting of a hand oeprated joystick. this mounting kit may also be used for mid-line mounting of other devices if the device accepts a 1/4-20 threaded bolt for attachment. Consists of a 1/2 inch diameter stainless steel mounting rod fitted to a 3/4 inch vertical shaft and a swingaway strap clamp for attachment to a standard 7/8 inch diamter armrest frame. A rod clamp is also included for mounting those joysticks which are not furnished with a rod clamp. permits the joystick t...[More Information]
    
    
62. SWINGAWAY MOUNTING KIT (MODEL 3514) Used for mounting a head operated actuator to the wheelchair back bar or push handle. The mounting kit consists of two right angle mounting rods joined by a double rod clamp and fitted to a pivot shaft, and a strap clamp for attachment to 7/8 inch diameter wheelchair tubing. Permits the actuator to be moved away from the user by an attendant and returned to its original position without the need to readjust the mounting....[More Information]
    
    
63. SWITCH MOUNT The Switch Mount is switch mounting hardware designed for use by individuals with fine motor or upper extremity disabilities. It enables the switch to be secured in two positions, sloping and right angle. A Velcro-style fixing pack is included. SIZES: Small (for Specs (not included; see entry) type switches or any small hand-switch), medium (for Jelly Bean switches, not included; see entry), and large (for Big Red or BigMack switches, not included; see entry). DIMENSIONS (HxW): Sloping surface i...[More Information]
    
    
64. SWITCH MOUNTING ASSESSMENT KIT (MODEL 65992) The Switch Mounting Assessment Kit, model 65992, is a control switch mounting hardware assessment kit designed for evaluating individuals who use switches. The complete kit includes a 13-inch Gooseneck,a one-inch pinch clamp, a platform clamp, one 7/8-inch pinch clamp, one 12-inch switch clamp tube with bushing, one 16-inch tube, one 12-inch 30-degree bend tube, tube clamps,U clamp, Universal Table Mount, Universal Swivel Clamp, Wheelchair Swivel Clamp, Mighty Mount, Tash Mounting Arm, Tash Moun...[More Information]
    
    
65. SWITCH MOUNTING PLATES (MODELS 2030, 2080, 2081, & 2082) The Switch Mounting Plates are switch mounting hardware designed to aid in mounting and positioning switches on wheelchairs and workstations. Model 2030 is a ball joint, model 2080 is a circular plate, model 2081 is a triangular plate, and model 2082 is a rectangular plate. All plates have a 0.25-inch 20 threaded stud back. DIMENSIONS: The circular plate is 3 inches in diameter, the triangular plate has three-inch sides, and the rectangular plate is 3 x 5 inches....[More Information]
    
    
66. SWITCH POSER The Switch Poser is a switch stand designed for use by individuals with neurological, fine motor, or upper extremity disabilities or cerebral palsy. This positioning stand has a base and a mounting surface on a flexible hinge. The base attaches to a smooth flat surface such as a tabletop through bottom suction. The switch (not included) attaches to the flat mounting surface with the included Super Velcro. Once attached, the switch can be adjusted to any angle from horizontal (flat) to vertical f...[More Information]
    
    
67. SWITCH TRAY The Switch Tray is a switch stand designed for use by individuals with fine motor or upper extremity disabilities. Velcro holds switches and switch mounts firmly in place in almost any position. It can be used in assessment situations where a wide variety of secure switch positions need to be tried. The tray is cushioned for comfort. SIZES: Desktop, medium, and small. DIMENSIONS: The Desktop model is 540 x 290 millimeters (mm), the medium model is 350 x 350 mm to fit many wheelchair trays, and t...[More Information]
    
    
68. TASH MOUNTING ARM SYSTEM (MODEL 66000) The Tash Mounting Arm System, model 66000, is switch mounting hardware designed for use by individuals with upper extremity, neurological, or severe physical disabilities or spinal cord injury. This three-part modular system mounts most Tash switches (not included) and consists of a mounting arm that adjusts with one large knob, the mounting connection appropriate for the specific switch selected, and the base clamp most suited to the environment in which the switch is to be used. Switch connect...[More Information]
    
    
69. TASH MOUNTING PARTS Tash Mounting Parts are switch mounting hardware pieces designed to enable a switch to be mounted in a desired location for indiviudals who use a switch or communication device. A variety of mounting pieces allow any Tash switch (see separate entries) to be mounted on a wheelchair arm or back, table, or bed rail. The clamps come in the following styles: pinch clamp, platform clamp, switch clamp, tube clamp, U clamp, universal swivel clamp, wheelchair bracket, and a wheelchair clamp....[More Information]
    
    
70. TASH SIP 'N' PUFF ADAPTOR (MODEL 32676), 1555 ADAPTOR (MODEL 32677), JOYSTICK ADAPTOR (MODEL 32678), MK2 ADAPTOR (MODEL 32679), & ADAPTOR CLAMP BUSHING (MODEL 32687) Adaptor Clamps are switch mounting hardware designed to secure controls to wheelchairs. All models are made of steel and coated with black baked epoxy. The TASH/Sip-N-Puff Adaptor, Model 32676, is designed to hold the TASH joystick and other controls. The unit is equipped with a metal loop which allows the electrical cord to be slipped through without removing the end plug. Model 32677, the 1555 Adaptor, is a clamp designed to hold the Invacare 1555 remote joystick by utilizing existing joystick...[More Information]
    
    
71. ULTIMATE SWITCH WITH QUICK DISCONNECT (MODEL 1072) The Ultimate Switch, model 1072, is a touch switch designed for use by individuals with physical disabilities. The switch can be activated by the chin, head, any part of an arm or leg. Only one gram of force is needed for activation, but it is sturdy enough to withstand severe blows. If the switch is struck too hard, the spring will absorb the blow and return to the prepositioned station within the user's reach. This model also includes Quick Disconnect mounting hardware which enables the switc...[More Information]
    
    
72. ULTRASTIK UltraStik is a surface anchor designed to anchor switches and other items to flat surfaces. This adhesive is reusable, extra tough and sticky, and easy to see. Stickiness can be restored with soap and water. UltraStik is available in packages of three custom cut circles (one to fit a Jelly Bean Switch and two for the Specs switch; see separate entries), a package of two custom-cut circles for the Jelly Bean Switch), or one rectangle to enable he user to cut adhesive to individual needs. DIMENSIO...[More Information]
    
    
73. UNIVERSAL SWITCH MOUNTING SYSTEM The Universal Switch Mounting System is switch mounting hardware designed to allow quick and easy placement of a switch in any position. The hardware, including a large triangular base plate, clamps onto a wheelchair or tableand holds up to five pounds. The system offers a choice of a single-lever control or a knob control to lock all joints in place. OPTIONS: An Extension Package for the Universal Switch Mounting System is also available; this package includes three sturdy extension rods and a...[More Information]
    
    
74. UNIVERSAL SWIVEL CLAMP (MODEL 1620) The Universal Swivel Clamp is switch mounting hardware that allows adjustment of both the length and angular relationship of two 1/4-inch mounting rods. This permits more flexibility of use of a switch, depending on the individual's position and needs....[More Information]
    
    
75. UNIVERSAL TABLE MOUNT (MODEL 59400) The Universal Table Mount, model59400, is switch mounting hardware designed for use by individulas who uses switches to operate assistive devices. This sturdy mount includes a universal swivel clamp, table mount base, and a straight tube and enables a straignt tube to be directly attached to a table. This mount can be used in conjunction with other Tash mounting hardware (see separate entry) to mount a variety of switches and devices....[More Information]
    
    

« Previous page    Page 3 of 3