Products are listed alphabetically.

Page 1 of 2    Next page »

1. ANCHORED JAR OPENER (MODEL 54009) --- DISCONTINUED. (Verified 12/97) RETAINED IN DATABASE FOR REFERENCE. ---The Anchored Jar Opener, model 54009, is designed for use by people with limited grip strength or grasping ability. The device mounts under a counter or cabinet with double-stick tape (included). Any size jar can be slipped into the V-shaped opening and turned to remove the lid. DIMENSIONS: .25 inch thick....[More Information]
   
   
2. BEOK JAR OPENER SET (MODEL BK3085 01) --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- Long lever jar opener with steel band to clamp on jar, adjusts 5/8 to 4 1/2 inches. Large T-handle, lever, 7 inches long. One opener fits on lid, one opener on jar, pull openers in opposite directions to open jar....[More Information]
   
   
3. CABINET JAR OPENER --- DISCONTINUED. (Verified 3/93) RETAINED IN DATABASE FOR REFERENCE. --- Jar opener for mounting under shelf or counter, opens screw lids 3/8 inch to 5 inches diameter. Opens twist off jar lids with one hand....[More Information]
   
   
4. CAP GRIPPER --- DISCONTINUED. (Verified 08/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Cap Gripper is a jar opener designed for use by individuals with arthritis and upper extremity disabilities. The device consists of a loop attached to a handle. The loop is placed around the jar lid or bottle cap and tightened with the thumb wheel in the base of the handle.Once secure, turning the handle opens the lid....[More Information]
   
   
5. EASI-TWIST --- DISCONTINUED. (VERIFIED 09/2012) RETAINED IN DATABASE FOR REFERENCE. --- The Easi-Twist is a jar opener designed for use by individuals with upper extremity or grasping disabilities or arthritis. This device has four ports with rubber-like surfaces to grip lids of most sizes. The squeeze handle gives extra leverage to open lids from nail polish bottles to mayonnaise jars. DIMENSIONS (LxWxD): The device is 9 x 4 x 1 inch and opens lids up to 3.25 inches in diameter. WEIGHT: 1 ounce....[More Information]
   
   
6. EASY CAP REMOVER --- DISCONTINUED. (Verified 9/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Easy Cap Remover is a jar opener designed for use by individuals with fine motor or grasping disabilities or arthritis. Resembling a apir of pliers, this device opens jars with smooth or ribbed lids with a twist. DIMENSIONS: Opens jars with tops from 0.75 to 2 inches in diameter....[More Information]
   
   
7. EASY LID OPENER --- DISCONTINUED. (Verified 07/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Easy Lid Opener is an under-counter jar opener designed for use by people with limited grasping ability. The unit has a plastic housing and a hardened steel gripper to open jars and bottles ranging in size from soda bottles to mason jars....[More Information]
   
   
8. ELECTRIC JAR OPENER (MODEL 10084) --- DISCONTINUED (Verified 11/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Jar Opener (no. 10084) is battery powered to automatically twist off all household size lids from 1/2-inch prescription bottle caps to 4-inch diameter lids. The device is designed to assist persons with arthritis, limited hand dexterity, or limited hand strength. When mounted on the underside of a cabinet, a jar or bottle needs only be held up and placed in the cone where a sensor switch activates the motor and does ...[More Information]
   
   
9. GILHOOLIE (MODEL K115) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Jar lid opener and bottle cap remover is a hand held with adjustable grip, and squeeze lever for opening jars. Bottle opener is on other end of handle, which is 9 inches long for added leverage. Reverse action reseals jars....[More Information]
   
   
10. HANDI-GRIP --- DISCONTINUED. (Verified 4/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Handi-Grip is a jar opener designed to assist individuals with limited hand strength or arthritis to grip and turn jar tops. The device consists of a plastic handle with an adjustable loop strap that goes around the top of the container to be opened. The handle provides leverage for turning lids, faucets, pipe fittings or other items. DIMENSIONS: Handle is 6 inches long. Strap adjusts to fit small nail polish caps to...[More Information]
    
    
11. HANDY AID GRIPPER (MODEL 20A) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Jar opener gripper, flexible rubber disk with textured surface that grasps jar lid. Can be used as door knob opener....[More Information]
    
    
12. JAR AND BOTTLE CAP GRIP (MODEL F75346) --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Bottle cap and jar opener. Cone shaped grip molded of soft resilient vinyl plastic; 4.3 inches in diameter; 2 inches high. Ribbing on inside and outside provides firm grip. Conforms to any bottle or jar cap from . 9 inch to 3.5 inches in diameter....[More Information]
    
    
13. JAR OPENER --- DISCONTINUED. (Verified 08/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Jar Opener is designed for use by individuals with arthritis or other hand disabilities. This device has a V-shaped opening and a long, squeezable handle. The lid of the jar slides into the opening and a lever motion breaks the seal and turns the lid. DIMENSIONS: 8 inches long....[More Information]
    
    
14. JAR OPENER --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Jar opener, molded of flexible plastic shaped in stepped cone configuration. Each step has internal ribs to aid in gripping any screw type top. Fits caps 1 1/8 to 3 inches. Dimensions: 3 3/4 inches diameter by 1 7/8 inches high....[More Information]
    
    
15. JAR OPENER (MODEL 00530) --- DISCONTINUED. (Verified 02/2013) RETAINED IN DATABASE FOR REFERENCE. ---Metal wrench jar opener. Adjustable grip areas. Opens jars and bottle caps of all sizes....[More Information]
    
    
16. JAR WRENCH --- DISCONTINUED. (Verified 4/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Jar Wrench is a jar opener designed for use by individuals with limited hand strength or manual dexterity. The device fits most jars and bottles. To use, the jaws are placed around the cap and the user grasps the non-slip vinyl-covered handles and turns to remove the cap. Serrated metal teeth in the jaws provide a strong grip....[More Information]
    
    
17. JAR WRENCH (MODEL 24201) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Jar and bottle opener has steel strap to grip and loosen lids and bottle caps from 5/8 to 4.5 inches in diameter. Long 7 inch handle provides leverage....[More Information]
    
    
18. LID AND JAR OPENER (MODELS 87-1038 & 87-1039) --- DISCONTINUED. (Verified 4/2004) RETAINED IN DATABASE FOR REFERENCE --- V shaped opener with serrated edges to remove screw caps and pry lids. Must be wall mounted. Model 87-1039 has crank type can opener attached....[More Information]
    
    
19. LID GRABBER JAR OPENER --- DISCONTINUED. (Verified 01/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Lid Grabber Jar Opener is a jar opener designed for use by individuals with upper extremity arthritis or disabilities. This opener grabs lids and twists them off. Made of ABS plastic, this unit has a built-in bottle opener. DIMENSIONS: The unit is 8 inches long and adjusts to fit lids up to 4 inches....[More Information]
    
    
20. LIDBUSTER --- DISCONTINUED. (Verified 04/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Lidbuster is a jar opener designed to assist persons with limited hand strength when opening vacumn packed jars or plastic storage containers. Constructed from stainless steel, this opener is shaped like a pair of pliers. It operates by placing its small, gripping teeth between the lid and jar lip and gently squeezing the handles to remove the lid. This product is intended to be used with no forced twisting, turning...[More Information]
    
    
21. LONG LEVER JAR OPENER --- DISCONTINUED. (Verified 4/93) RETAINED IN DATABASE FOR REFERENCE. --- Long lever manual jar opener, rubber gripping strap to place around jar lid. 1/2 to 3 1/2 inch diameter jar lids or caps....[More Information]
    
    
22. LONG LEVER JAR OPENER (MODEL BK3085) --- DISCONTINUED. (Verified 11/2012) RETAINED IN DATABASE FOR REFERENCE. ---Jar opener has 7 inch handle with steel band which clamps on jar lids. Flexible insert can be flipped inside to fit bottle lids. Fits lids from 5/8 inch to 4 1/2 inches in diameter....[More Information]
    
    
23. MOUNTED JAR OPENER (MODEL 24200) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- V shaped jar opener mounts under cabinet. Opens and closes jar lids from 1.25 to 4.5 inches in diameters. Plated steel. No moving parts....[More Information]
    
    
24. MULTIPURPOSE OPENER (MODEL F75309) --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Jar opener gripper tool for opening caps or lids which must be pried open, squeezed, cracked, turned or twisted. Works similar to pliers. Molded plastic handles. Multishaped plated steel jaws grip lids from 1/ 2 to 3 5/8 inches in diameter. Tip may be used as a pry for opening....[More Information]
    
    
25. OPEN UP JAR AND BOTTLE OPENER --- DISCONTINUED. (Verified 01/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Open Up Jar and Bottle Opener is an automatic jar opener designed for use by individuals with limited grip strength. The device mounts beneath a cabinet or shelf, and when a jar or bottle is held up to the sone shaped opener, a safety motor is activated to open screw-tops and push-and-turn lids (including child-proof safety caps) from .5 to 4.75 inches in diameter. POWER: The device is available in an electric mod...[More Information]
    
    

Page 1 of 2    Next page »