Products are listed alphabetically.

Page 1 of 2    Next page »

1. ACTIVE LIFE STATION The Active Life Station is an accessible table designed for use with children and adults with severe cognitive, emotional, or physical disabilities who require constant supervision. This table system surrounds the user on all sides, with one side being a secure access door. The individual's wheelchair or feeder seat is positioned on a 360-degree rotating base in the center, enabling the user to access table surfaces on all sides. The station can be used for watching television, using a computer,...[More Information]
   
   
2. ADD-ON TABLE --- CUSTOM ADAPTATION --- PURPOSE: To provide a dining table for a young woman with mobility disabilities. The add-on table is made of a 5/8- inch plywood and resembles a card table with only two legs. The front edge of the table is attached and removable from the main dining room table with two sturdy hooks. The height of the table has been lowered to a more comfortable level and a semi-circle has been cut out to fit the young woman’s waist, allowing her to get up close. TITLE: The Add-on Table...[More Information]
   
   
3. Adapted Desk. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Desk designed and modified by someone with cerebral palsy so he could store items where they are easy for him to reach and to hold books for reading. Made from single pedestal desk 48 by 30 inches wide with legs shortened. Bookcase made of 3/4 inch hardwood with two shelves. Two tilted wooden trays, extended across the desk, are used as bookholder. SKILLS REQUIRED: Woodworking. TITLE: Adapted Desk JOURNAL: Accent on Living REF: Vol 30 No 1, Summer ...[More Information]
   
   
4. BEDSIDE COMPUTER STAND --- CUSTOM ADAPTATION --- PURPOSE: To enable an individual with spinal cord injury to utilize a computer from a bed. The base of the stand is a standard overbed table on a wheeled base. A box of varnished plywood on a caster base was added to the table. The box was equipped with a central shelf, creating three surfaces on which to store computer equipment and other items. The original table surface was attached to the side of the box and is height adjustable using a trinut. The surface also rota...[More Information]
   
   
5. COMPUTER TABLE The Computer Table is an accessible table for wheelchair users. The table's height is 29 inches to accommodate a wheelchair, and has a tabletop made of 3/4-inch plywood with a teak veneer. A monitor shelf is included at the rear of the table, and the legs consists of a set of standard folding table legs which will not interfere with the wheelchair's wheels. PROTOTYPE DEVELOPMENT: Designed by Paul Cermak for wheelchair users who cannot use standard computer desks because they are too low to wheel...[More Information]
   
   
6. CTL SERIES CLASSROOM TABLE The CTL Series Classroom Table is a height-adjustable classroom table and computer work station designed for use by children who use wheelchairs. This table can be used in school computer labs. The work surface is made from high-density laminated wood and is supported by a powder-coated steel frame. OPTIONS: Enclosed CPU holder; keyboard drawer; keyboard arm and tray; modesty panel; wheel kit; surge protector; cable management kit; table to table cable connection kit; floor to table cable connec...[More Information]
   
   
7. E-Z GLIDE SERIES ADJUSTABLE TABLE BASES The E-Z Glide Series Tables are accessible tables and adjustable-height work tables designed for people who use wheelchairs. The 1700 Series adjusts from child to adult height, the 1800 Series adjusts from standard to wheelchair height, and the 1900 Series adjusts from restaurant to bar height with a stop at standard wheelchair height. The E-Z Glide mechanism incorporates a patented design and gas cylinders to facilitate table adjustment. A knob adjustment allows the tables to change heights and...[More Information]
   
   
8. ELECTRIC HEIGHT ADJUSTABLE ACTIVITY TABLE The Electric Height Adjustable Activity Table is a powered height adjustable work table designed for use by individuals who use wheelchairs. Height adjustment is achieved with push-button controls. Both models have a laminate top and an extruded aluminum base. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 28 to 34 x 60 x 30 inches. COLOR: Maple top. WARRANTY: Two-year warranty....[More Information]
   
   
9. ELECTRIC WORK TABLE (MODEL 4375) The Electric Work Table, model 4375, is a powered height adjustable work or therapy table designed for use by wheelchair users. This height-adjustable table has a direct-drive lift mechanism that elevates the tabletop and a pedestal design that allows wheelchair access, and a hand-control panel mounted on the underside of the tabletop. The table has a high-pressure laminate top with a natural oak finish and protective molding along the edges. It can can accommodates two wheelchairs and up to fiv...[More Information]
   
   
10. ERGOLIFE TABLET DINING TABLE(MODEL GC3-42) The Ergolife Tablet Dining Table, model GC3-42, is a wheelchair accessible table designed for use in cafeterias or in family, common, activity or dining room settings in long term care facilities and hospitals. The table is pre-drilled so an optional tablet can be attached on any side for wheelchair access. Tops are available in solid hardwood, melamine, or high pressure laminate. The legs are heavy duty steel. DIMENSIONS (HxDxW): 29.5 x 42 x 42 inches. Custom heights are available....[More Information]
    
    
11. EZ CARE HEIGHT ADJUSTABLE OVERBED TABLE (MODEL EZ-110550) The EZ Care Height Adjustable Overbed Table, model EZ-110550, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a laminate top and an H-frame base with four swivel casters. It can be turned for either right- or left-hand use. The height is adjusted using a one-touch release lever, and gentle pressure on th...[More Information]
    
    
12. EZ CARE HEIGHT ADJUSTABLE PIVOT AND TILT OVERBED TABLE (MODEL EZ-110500) The EZ Care Height Adjustable Pivot and Tilt Overbed Table, model EZ-110500, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This table has an open frame base to slide under the bed or for wheelchair accessibility. It has a laminate top and a C-frame base with four swivel casters. The table is supported by a height-adjustable column that angles upward toward the user from the right side of the frame. The table top tilts to ...[More Information]
    
    
13. FLEXTABLE (MODEL A) The FlexTable, model A, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate four people, has four height-adjustable work stations mounted on the ends and each side of a rectangular base. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENSIONS (LxW)...[More Information]
    
    
14. FLEXTABLE (MODEL B) The FlexTable, model B, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate six people, has six height-adjustable work stations mounted on a rectangular base, one on each end and two on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENS...[More Information]
    
    
15. FLEXTABLE (MODEL C) The FlexTable, model C, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate eight people, has eight height-adjustable work stations mounted on a rectangular base, one on each end and three on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. ...[More Information]
    
    
16. FLIP-UP TABLE --- CUSTOM ADAPTATION --- PURPOSE: To provide a mobile table that can be moved close enough to a person seated in an armchair to be used for eating or working. Elongate the crossbar of the base of a hospital bedside table to increase the width of the base to be slightly wider than an armchair. If necessary, lengthen the table's vertical support to adjust the table's height. MATERIALS: One hospital bedside table and additional tubing. TITLE: Doing It Yourself. AUTHOR: Wechsler, K. JOURNAL: Quest....[More Information]
    
    
17. INDIVIDUAL TILT WORK TABLE (MODEL PC 5358-02) The Individual Tilt Work Table, model 535802, is a height adjustable, accessible tilt-top work table designed for use by people who use wheelchairs. The manual crank adjusts the height of the telescoping legs and the top tilts to any angle between 0 and 50 degrees to accommodate tasks and individuals. The unit includes the table and a tray/shelf extension with a cut out. DIMENSIONS: The tabletop is 35 x 24 inches and the tray attachment is 11 inches. The height adjusts from 22 to 30.5 inches....[More Information]
    
    
18. KAYE T-TABLES (MODELS TT-1 & TT-2) The Kaye T-Tables are tilt top tables designed for use with children with neurological or fine motor disabilities. Designed to be used in conjunction with Kaye Adjustable Benches, T-Seats, or Straddle Seats, these height-adjustable wooden tables have tilt tops equipped with tow large wooden clamps to properly psition books and papers and a removable wooden ledge to keep items from sliding off the table when tilted. The table top adjusts from horizontal to 90 degrees. Model TT-2 accommodates chil...[More Information]
    
    
19. MAKING A WHEELCHAIR WORKTABLE. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Accessible height table with body cutout for wheelchair users. Wooden table with legs high enough to clear a wheelchair. Body cutout to allow person to get closer to work. Backboard and sideboard help prevent things from falling off the back of the table. Instructions includes dimensions and how to secure the legs. Includes drawings. SKILLS REQUIRED:Simple woodworking. TITLE: Home Improvement and Repair: Special Purpose Rooms REF: Book: Time Life B...[More Information]
    
    
20. MANUAL HEIGHT-ADJUSTABLE ACTIVITY TABLE The Manual Height-Adjustable Activity Table is an accessible table or computer workstation designed for use by individuals who use wheelchairs. The table height adjusts with a hand crank system. The table has a laminate top. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 27 to 39 x 60 x 30 inches. ...[More Information]
    
    
21. MARATHON TABLE The Marathon Table is a height-adjustable computer workstation designed for use by individuals who use wheelchairs or who stand to work. Depressing a release paddle enables immediate, yet controlled, surface height positioning. A two-way brake locks the work surface in both upward and downward directions. For user safety, a weight-sensing interlock releases the brake only when the table is properly counterbalanced. Counterbalance supports loads between 75 and 225 pounds, allowing immediate adjus...[More Information]
    
    
22. MED I Accessible all purpose table has nickel chrome legs with twin wheel casters, 2 locking and 2 nonlocking. One piece molded top has slate look finish; measures 24 inches by 36 inches. Has 5 adjustable leg heights from 27 inches to 33 inches. Available in standard colors; custom colors extra....[More Information]
    
    
23. MED III ADAPTED OVAL PATIO TABLE Accessible table. Adapted oval patio table accommodates 4 wheelchairs between 4 attached stationary seats. 14 gauge tubular steel frame and legs have zinc and dry powder coating. Stain and heat resistant. Optional built in umbrella mount. Table available in standard colors; custom colors extra. Umbrellas available in matching colors. Maximum width 69 inches; maximum length 78 inches; 31 1/2 inches between stationary seats....[More Information]
    
    
24. OVERBED TABLE The Overbed Table is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a wipe-clean laminate top with a built-in cup holder, and a C-frame base with four swivel casters. It can be converted for either right-hand or left-hand use. DIMENSIONS: The height adjusts from 28.25 to 42.25 inches. The table surface is ...[More Information]
    
    
25. PERSONAL WORK TABLE WITH TILT TOP (MODEL 76-31K) The Personal Work Table with Tilt Top, model 76-31K, is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. The top tilts from 0 to 50 degrees and is equipped with a lip on the front edge to keep objects in place. The legs are adjustable with an indexing plunger. OPTION: 3.5-inch locking dual-wheel casters. DIMENSIONS (HxLxW): 23 to 33 x 36 x 30 inches....[More Information]
    
    

Page 1 of 2    Next page »