Products are listed alphabetically.

Page 1 of 3    Next page »

1. 2-WAY LIFT CHAIR (MODEL 70556) The 2-Way Lift Chair, model 70556, is a seat lift chair and recliner designed for use by individuals with mobility disabilities. This two-position chair features quiet and smooth lift and recline. With a touch of a button the chair lifts the user up. A built-in emergency battery back-up allows the chair to return to the sitting position in the event of a power outage. POWER: Uses household current; the backup uses 9-volt batteries (not included). DIMENSIONS (HxW): The chair is 43 x 29 inches. Th...[More Information]
   
   
2. BARIATRIC LIFT RECLINER (MODEL MDR35B700V1) The Bariatric Lift Recliner, model MDR35B700V1, is a recliner chair designed for use by individuals with mobility disabilities. This high-strength recliner has independent back and foot positionins with hand controls, an extra-wide head rest, and vinyl upholstery. Three separate motors control its operation. DIMENSIONS (HxW): 47 x 45 inches overall; the distance from the floor to the top of seat is 21 inches. When the chair is reclined, the distance required from the wall is 24 inches. The seat...[More Information]
   
   
3. BELLAIRE WITH LUMBAR SUPPORT The Bellaire with Lumbar Support is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic Wear-Dated fabric, this chair also features Scotchgard fabric protection, dual magazine pockets, adjustable lumbar support, tri...[More Information]
   
   
4. BRODA BASIC CHAIR (MODEL 30VT) The Broda Basic Chair, model 30VT, is a wheeled geriatric recliner designed for use by individuals who need support while sitting. This chair features a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. Other features include a seat with tilt infinitely adjustable up to 25 degrees, a reclining back with the recline infinitely adjustable up to 45 degrees, an adjustable-length elevating legrest, a removable flip-down...[More Information]
   
   
5. BRODA ELITE CHAIR (MODEL 35V) The Broda Elite Chair, model 35V, is a geriatric chair designed for use by individuals who need support while sitting. This chair has up to 25 degrees of infinitely-adjustable seat tilt and up to 45 degrees of infinitely-adjustable back recline. It has a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. Other features include an adjustable elevating legrest, single- or double- plate footrest with adjustable footpla...[More Information]
   
   
6. BRODA ELITE CHAIR (MODEL 785) The Broda Elite Chair, model 785, is a recliner chair designed for use by individuals who need positioning support while sitting. This tilt-in- space chair has up to 90 degrees of infinitely- adjustable back recline and up to 38 degrees of infinitely-adjustable seat tilt. It features a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. The removeable swing-away armrests are individually height adjustable, with push-...[More Information]
   
   
7. BRODA ELITE CHAIR (MODEL 85V) The Broda Elite Chair, model 85V, is a geriatric chair designed for use by individuals who need support while sitting. This tilt-in-space chair has up to 38 degrees of infinitely-adjustable seat tilt and up to 90 degrees of infinitely-adjustable back recline. It has a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. Other features include an adjustable elevating legrest, single- or double-plate footrest with adjus...[More Information]
   
   
8. BRODA MIDLINE FULL RECLINER The Broda Midline Full Recliner is a recliner chair designed for use by individuals who need positioning support while sitting. This tilt-in- space chair has up to 90 degrees of infinitely- adjustable back recline and up to 38 degrees of infinitely-adjustable seat tilt. It features a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. Other features include armrests with independent height adjustment within a range o...[More Information]
   
   
9. CARE CHAIR 1, 2, & 3 Upholstered chair with powered elevating seat. Three models; straight, semi reclining, and fully reclining. Operated by cord mounted rocker switch, with optional toggle switch. Assorted colors and patterns. Soil resistant fabrics available. U.L. listed electrical components and 14 gauge steel lift mechanism. 2 year warranty on lift and recliner mechanisms, 1 year on motor....[More Information]
   
   
10. CLINICAL RECLINER The Clinical Recliner is a vibrotactile amplification system designed for use by individuals with cognitive, neurological, physical, or emotional disabilities. Used for positioning, calming, or stimulating, this chair features modern styling, a welded steel frame, and a patented gas spring recliner mechanism which enables the chair to recline to the Trendelenburg position. A built-in patented vibroacoustic speaker system provides tactile stimulation, enabling users to feel music as well as hear ...[More Information]
    
    
11. COMFORT + PLUS CLINICAL RECLINER (MODELS 6902 & 6903) Recliner chair with high back and full length armrests. Reclines to 3 positions. Legrest elevates as chair reclines. Four 5 inch casters. Self storing overlap table tray swings down to side. Upholstery is vinyl bonded to foam, flame and stain resistant seams. Push bar on back. Overall width 27 inches, overall depth 37 inches, overall height 45 1/2 inches, seat width 20 inches....[More Information]
    
    
12. COMFORT LIFT CHAIR (MODEL 300) Adjustable seat lift recliner. Adjustable lift angles, from 30 to 180 degrees or flat position in 5 increments. Full recline with 1 1/2 inch placement from wall. Complete chair rises via gear driven motor. Welded steel tube lift mechanism is plated. Uses motor-driven linear actuator with clutch and thermal protection. 110 Volt, 2.4 Amp, standard household current. 100% Dupont nylon fabric with 3M Scotch Guard Protection, foam filled. Solid hardwood frame. Control may be hand held or mounted on r...[More Information]
    
    
13. COMFORT PLUS, COMFORT PLUS II (MODEL 6960) Seat lift recliner chair. Fully powered back; removable back for cleaning, portability; choice of upholstery; back reclines within 8 inches from wall; contoured back; arms elevate with seat; armrest covers; 5.5 inch thick seat made of multiply layered foam; ottoman extends prior to back reclining to allow elevation of legs while sitting upright; storage pouch; side mounted switch for powered recline and lift. Overall height 41 inches, overall width 30 inches, seat width 20 inches, seat depth 21 ...[More Information]
    
    
14. COUNTRY LIFT CHAIR (MODEL TMR-400) The Country Lift Chair, model TMR-400, is a seat lift recliner chair for individuals with limited mobility to help them get into and out of the chair. It features a sealed single switch, paddle type, hand control; 4 rubberized leveler legs; an oak frame; fire retardant materials; a quick disconnect of electrical components; and a double plate, wide base, steel frame for stability. The chair reclines 8 inches more than standard recliners for near full bed positioning. POWER: 115 volt AC, 1.5 amps...[More Information]
    
    
15. DELUXE CONVALESCENT RECLINER The Deluxe Convalescent Recliner is a recliner chair designed for use by individuals who require support while sitting. This chair can be adjusted and locked in three positions: upright, with the footrest elevated, and fully reclined. It has a high back headrest, padded arms, and oversized casters. The large, molded plastic tray attaches to the arms, slide ajusts, and can be stored on the chair back. The cushions are covered in mildew resistant vinyl. A built-in moisture barrier prevents seepage...[More Information]
    
    
16. EASY COMFORT LIFT CHAIR (MODEL LC200) The Easy Comfort Lift Chair, model LC200, is a seat lift and recliner chair designed for use by individuals with physical or mobility disabilities. The chair has a two-position all-electric lift and reclining mechanism with a button control, which either tilts the user back to rest, or rises to help the user stand. The chair has a hardwood frame, a heavy-duty steel lift mechanism, and a wide seat with soft fabric. POWER: Uses household current, with integrated emergency battery backup. CAPACITY:...[More Information]
    
    
17. EXTRA CARE BARIATRIC PATIENT ROOM RECLINER (MODELS 7150 & 7155) The Extra Care Bariatric Patient Room Recliner, models 7150 and 7155, is a reinforced recliner chair designed for use by individuals with obesity and mobility disabilities or by individuals who require support while sitting. This chair back reclines up to 40 degrees and the leg rest articulates as the back reclines. The manual reclining mechanism is located in the rear of the chair and is intended to be operated by an attendant. The chair also has four locking casters. DIMENSIONS: Model 7150 is ...[More Information]
    
    
18. FAIRVIEW The Fairview is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic, polyester, and Olefin fabric, this chair also features traditional styling with a tufted chair back design, arm covers, and a magazine pocket on t...[More Information]
    
    
19. GENTLE LIFT RECLINER (MODELS TMR48, TMR49, TMR348, TMR329, & ECONOMY) The Gentle Lift Recliner line includes 2- and 3-position, fully reclining seat lift chairs designed to assist individuals who have difficulty sitting down in or getting up from arm chairs. Features include a hardwood (oak) frame; fire retardant materials; quick disconnect electrical components; arm, headrest, and frame covers; a double plate, wide base with steel base frame for stability; and a large side pocket. The entire chair lifts with the user seated to raise the user to a standing positio...[More Information]
    
    
20. HEAT AND MASSAGE LIFT CHAIR (MODEL 70557) The Heat and Massage Lift Chair, model 70557, is a recliner chair designed to assist individuals with mobility disabilities in rising to a standing position. This electric chair has three reclining positions, a lift mechanism to bring the user smoothly to a standing position, heat and gentle vibrating massage, hand-held controls, and a choice of velvet fabric or vinyl upholstery. It has a single motor with a built in emergency battery back-up, allowing the chair to return to sitting position in ...[More Information]
    
    
21. LIFT CHAIR (PETITE SERIES 1500) Full power lift and recline chair sized for persons 5 feet 2 inches and under, with hardwood chair frame with steel fasteners and single switch hand control. Screw lift mechanism, powered by 115 volt motor drive, lifts up to 350 pounds. Chair rests on 14 gauge steel base with wide stance for stability. Polyfoam seat cushions. Backs have non-allergic fiber padding. Chair is covered in fire-retardant, velvet fabric, available in a variety of colors. One year warranty on motor, lift mechanism and o...[More Information]
    
    
22. LIFT CHAIRS (SERIES 2500 & SERIES 4500) Both Series 2500 and 4500 chairs have full power lift and recline, hardwood chair frames and 14 gauge steel base frames, steel fasteners and single switch hand controls. Both chair series have screw lift mechanisms, powered by 115 volt motor drives and lift up to 350 pounds. Both have polyfoam seat cushions and chair backs have non-allergenic fiber padding. Chairs are covered in fire retardant velvet fabric available in a variety of colors. One year warranty on motor and lift mechanism and one y...[More Information]
    
    
23. MILLENNIUM RECLINER The Millennium Recliner is a vibrotactile amplification system designed for use by individuals with cognitive, neurological, physical, or emotional disabilities. Used for positioning, calming, or stimulating, this chair features modern styling and curved arms. A built-in patented vibroacoustic speaker system provides tactile stimulation, enabling users to feel music as well as hear it for a full-body experience of sound and vibration. This device connects to most stereo systems with 10 to 100 wa...[More Information]
    
    
24. MODIFIED CHAIR LEVER --- CUSTOM ADAPTATION --- PURPOSE: To provide a customized adaptation to operate the level mechanism of a reclining chair for an individual with right arm weakness. The original lever was quite short and positioned low down on the right side making it very difficult to push down to raise and lower the leg support section of the chair. A handle was created that bent out far enough from the base so it cleared the chair armrest and with a modified handgrip for easier grasping. A bent section of squ...[More Information]
    
    
25. MURPHY The Murphy is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic and Olefin fabric, this chair also features traditional styling with a 10-button chair back design. In addition to the lift-out feature, this chair o...[More Information]
    
    

Page 1 of 3    Next page »