Products are listed alphabetically.

« Previous page    Page 2 of 2

26. JEROME ABDOMINAL BINDERS (MODELS 202-0050 & 202-0051) --- DISCONTINUED. (Verified 08/07) RETAINED IN DATABASE FOR REFERENCE. --- The Jerome Abdominal Binder provides support to the abdominal muscles for individuals who have had surgery or for those with low back injury or disability. The Binder provides circular compression and support for the abdomen and may be used to keep post-operative surgical dressings in place. This binder has front Velcro closure. SIZES: Small/medium or medium/large. DIMENSIONS 12 inches high....[More Information]
    
    
27. LUMBAR CRADLE TLC --- DISCONTINUED. (Verified 06/2002) RETAINED IN DATABASE FOR REFERENCE. -- The Lumbar Cradle TLC is a low back orthosis designed to establish and support a normal lumbar lordosis in a supine or sitting position. It is shaped from open cell polyurethane foam and covered in hospital grade cotton blend fabric. The unit's double contoured design provides both vertical and lateral support to the lower back. An adjustable, soft foam belt holds the support in place; it does not interfere with sleeping...[More Information]
    
    
28. LUMBAR SUPPORT --- DISCONTINUED. (Verified 06/2006) retained in database for reference. --- The Lumbar Support is a low back orthosis made of foam designed to provide support to the lumbar region of the back at the office, at home, or in the car. The cushion is flat on one side and curved on the other. The cushion comes with a removable cover....[More Information]
    
    
29. LUMBAR SUPPORT (MODEL 8000) --- DISCONTINUED. (Verified 09/2007) RETAINED IN DATABASE FOR REFERENCE. --- Lumbar support. 1/4 inch Neoprene nylon with 1/4 inch pressure pad in lumbar area for extra support. No stays. Velcro closures in front....[More Information]
    
    
30. LUMBRO-SACRAL SUPPORT --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Lumbro-Sacral Support is a low back orthosis designed for use by individuals with weak or injured backs. This polyester and cotton brace has elastic side pulls for three-way compression and pressure-sensitive Velcro fastening and adjustment. The brace is hand washable. DIMENSIONS: The front is 9 inches high and the back is 10 inches high. SIZES: Small (30 to 34 inches at the hips), medium (35 to 38 inches at the hips...[More Information]
    
    
31. MAXIMUM SUPPORT BACK BELT --- DISCONTINUED. (Verified 02/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Maximum Support Back Belt is a low back orthosis designed for use by people with low back pain, weakness or injury. The extra-wide breathable spandex belt has four aluminum stays and shoulder straps. Non-slip webbing prevents riding up. SIZES: Extra extra small, extra small, small, medium, large, extra large, and extra extra large. COLOR: Black....[More Information]
    
    
32. MEDIUM SUPPORT BACK BELT --- DISCONTINUED. (Verified 02/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Medium Support Back Belt is a low back orthosis designed for use by people with low back pain, weakness or injury. The belt has four aluminum stays and a foam compression pad at the fifth lumbar region. A unique double overlapping fastening system allows for ease of adjustment from the passive to the active position. The active position provides durable support with freedom of movement. SIZES: Extra extra small, ext...[More Information]
    
    
33. MR. AMERICA INSTADJUST BACK SUPPORT BELT --- DISCONTINUED. (Verified 08/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Mr. America Instadjust Back Support Belt is a low back orthosis designed for use by individuals with back pain. This orthosis provides support when the user is lifting and moving objects, and can be used by caregivers who lift and move individuals with severe physical disabilities or spinal cord injuries. By supporting the lower back and abdomen, it reduces the risk of lumbar spinal strain. It enhances the natural f...[More Information]
    
    
34. PIPEER RELAX CINCH --- DISCONTINUED. (Verified 11/2005) RETAINED IN DATABASE FOR REFERENCE. --- The PiPeer Relax Cinch is a low back orthosis and abdominal binder designed for use by individuals with weak or injured backs or abdominal muscles. This rubber elastic and cotton brace has a three-strap adjustable cinch belt with side buckles. The brace is hand washable. DIMENSIONS: The front is 8 inches high and the back is 6 inches high. SIZES: Small (29 to 32 inches at the waist), medium (33 to 36 inches at the waist...[More Information]
    
    
35. POWER BACK SUPPORT (MODELS 5661 & 5661B) -- DISCONTINUED. VERIFIED 10/2012. RETAINED IN DATABASE FOR REFERENCE. -- The Power Back Support is a low back orthosis designed to prevent back injury for therapists and care givers while lifting. This lightweight, machine-washable support reminds the wearer to utilize proper body mechanics. SIZES: Small, medium, large, extra large, and extra extra large. COLOR: Model 5661 is white and model 5661B is black....[More Information]
    
    
36. PROFLEX BACK SUPPORT (MODELS 2000 & 2050) --- DISCONTINUED. (Verified 2/96) RETAINED IN DATABASE FOR REFERENCE. --- The ProFlex Back Support is a low back orthosis and abdominal binder designed reduce the incidence of back injury by supporting the lower back and abdominal areas during extended periods of lifting. The unit has a contour design and resembles a wide belt. It is available with (model 2000) or without (model 2050) suspenders. SIZES: Extra Extra Small to Extra Extra Large to fit hips from 28 to 52 inches and waists 22 to 46 i...[More Information]
    
    
37. PROFLEX UTILITY BACK SUPPORT (MODEL 2000) --- DISCONTINUED. (Verified 2/96) RETAINED IN DATABASE FOR REFERENCE. --- The ProFlex Utility Back Support, model 2100, is a low back orthosis designed to provide support to the lumbar area for persons who do a considerable amount of lifting. It also has a place to hang tools and equipment weighing up to 50 pounds. The belt is made of webbing straddles with a contour support and suspenders. SIZES: Small, Medium, Large, and Extra Large to fit hips from 36 to 48 inches and waists from 30 to 42 inc...[More Information]
    
    
38. ROLYAN LUMBAR ROLL (MODEL A818-302) --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Rolyan Lumbar Roll, model A818-302, is a back support cushion designed to help relieve and prevent lower back pain by promoting correct posture while sitting for persons with low back pain. This foam roll features a polyester/cotton cover and a strap to attach the roll to any chair back. The cover can be machine washed and dried. DIMENSIONS: (Length x Width) 11 x 4.25 inches....[More Information]
    
    
39. ROLYAN THERMAL RX LUMBAR WRAP (MODELS A615-41 to A615-46) --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Rolyan Thermal Rx Lumbar Wrap, models A615-41 to A615-46, is a lumbar support designed to provide support and compression for the lower back. It features elastic side straps designed to provide a contoured fit and heat retention. DIMENSIONS: Determined by width of user's waist. Model A615-41 - Extra-Small is 23.50 to 27.25 inches wide; A615-42 - Small is 27.5 to 31.75 inches wide; A615-43 Medium is 32 to 35 inches; ...[More Information]
    
    
40. SACRO BRACE WITH THERMO PAD (MODEL B2 5) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lower back support brace. Elastic band, velcro closure, removable heat pad to reflect body heat, adjustable bands for custom fit. One size....[More Information]
    
    
41. SPORTS GUARD SUPPORTS --- DISCONTINUED. (Verified 07/93) RETAINED IN DATABASE FOR REFERENCE. --- Neoprene supports for relief of problems due to arthritis or musculoskeletal injuries. Made of solid, nongrain neoprene rubber providing uniform compression and insulation that retains body warmth and increases circulation. neoprene is stitched on both sides to nylon fabric shell that aids circulation and ease of application. Adjusts with velcro straps or stitched in nylon zippers. Machine washable, no shrinkage. Availabl...[More Information]
    
    
42. SUPPORT WITH POWERNET DISCONTINUED. (Verified 08/2008) RETAINED IN DATABASE FOR REFERENCE. --- ...[More Information]
    
    
43. THREE-PULL LUMBOSACRAL SUPPORT (MODELS 433-0020 & 433-0023) --- DISCONTINUED. (Verified 08/07) RETAINED IN DATABASE FOR REFERENCE. --- The Three-pull Lumbosacral Support is a low back orthosis designed for use by individuals with low back pain. Intended for use when restriction of motion is required, this brace features three-pull lateral lace adjustment; two removable, contoured metal paraspinal stays; flexible front, back, and side stays; anterior hook closure; and mesh gussets at the rib and perineal areas. Model 433-0020 is the women's brace and mode...[More Information]
    
    
44. TWO-PULL LUMBOSACRAL SUPPORT (MODELS 433-0010, 433-0011, & 433-0015) --- DISCONTINUED. (Verified 08/07) RETAINED IN DATABASE FOR REFERENCE. --- The Two-pull Lumbosacral Support is a low back orthosis designed for use by individuals with low back pain. Intended for use when restriction of motion is required, this brace features two-pull lateral lace adjustment; two removable, contoured metal paraspinal stays; flexible front, back, and side stays; anterior hook closure; and mesh gussets at the rib and perineal areas. Model 433-0010 is the standard women's brace, mo...[More Information]
    
    
45. VERSA BELT & VERSA SUPPORT ---DISCONTINUED. (VERIFIED JAN 1994) RETAINED IN DATABASE FOR REFERENCE.--- Lumbosacral back support has wide elastic belt with neoprene inserts. The neoprene keeps in body heat, and acts as an insulator when used with gel pack for hot or cold therapy. The Versa Support is a modlable back insert which can be inserted into a pocket in the Versa Belt. The insert is low temperature plastic which can be warmed on a heating tray to form to the body or re-shaped. Sizes: belt, regular, extra large. Sup...[More Information]
    
    
46. WARM N FOAM --- DISCONTINUED. (Verified 08/07) RETAINED IN DATABASE FOR REFERENCE. --- --- DISCONTINUED. (Verified 12/97) RETAINED IN DATABASE FOR REFERENCE. --- Thermoplastic low back support, laminated between woven fabric. Support is heated and molded over lumbosacral area, fits into washable retaining belt, velcro closure. 8 sizes. Fit waist 18 to 82 inches....[More Information]
    
    
47. WORKSAFE BACK SUPPORT SYSTEM --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Adjustable back support system holds upper back and shoulders in alignment. Chest strap keeps shoulder straps in place. Upper back component with adjustable shoulder straps. Stays and anti-slip bands. Double elastic waist bands. Worn over or underneath clothing. Washable. Waist sizes: extra small, 24 to 27 inches; small 28 to 32 inches; medium 33 to 32 inches; large 38 to 42 inches; extra large 43 to 47 inches....[More Information]
    
    

« Previous page    Page 2 of 2