Products are listed alphabetically.

Page 1 of 1

1. ADD-A-GRIP --- DISCONTINUED (Verified 10/2011). REPLACED BY THE EZGRIP PEN/TOOL GRIP. RETAINED IN DATABASE FOR REFERENCE. --- Add-A-Grip is a pen or pencil holder designed for use by individuals with arthritis or other hand disabilities. Made of a soft rubber composite, this ergonomic slip-on grip works with pens, pencils, modeling tools and knives, picks, probes, scribes, and other pencil-like tools. This grip requires only onefinger, knuckle, or thumb to exert downward pressure on the tool, eliminating t...[More Information]
   
   
2. ADL HAND CLIP --- DISCONTINUED. (Verified 3/2005)RETAINED IN DATABASE FOR REFERENCE. --- Hand clip consists of a thermoplastic Kydex bracelet-like palmar clip, with a pocket made to swivel on palmar section of clip. Holds utensils such as toothbrush, flatware, pencils, etc. Can be used in conjunction with ADL Right Angle Holder and ADL Extension Handle. Available in one child size, or in three adult sizes with standard, wide, and double utensil pockets....[More Information]
   
   
3. ADL HAND CUFF --- DISCONTINUED. (Verified 3/2005)RETAINED IN DATABASE FOR REFERENCE. --- Hand cuff for daily living activities consists of leather pocket attached to a dorsal elastic strap which wraps around the back of the palm of the hand. Slot on palm side holds utensils such as toothbrush, flatware, pencils, etc. Can be used in conjunction with ADL Right Angle Holder and ADL Extension Handle. Available in three sizes: Small (MCP width 2.5 inches), Medium (MCP width 3 inches) and Large (MCP width 3.5 inche...[More Information]
   
   
4. ADL RIGHT ANGLE HOLDER --- DISCONTINUED. (Verified 3/2005)RETAINED IN DATABASE FOR REFERENCE. --- Pencil or pen holder designed to hold pencil or pen and fit into a universal cuff. Holder consists of an L-shaped aluminum bar and an ADL adaptive pocket which swivels perpendicular to the plane of the palm. Can be inserted into RTC Hand Clip or RTC Hand Cuff. With a pencil eraser pointing down, holder can also be used for page turning or typing....[More Information]
   
   
5. BLACKBURN WRITING AND MULTIPURPOSE SYSTEM --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Modular writing aid or utensil holder. Fastens to palm of hand with velcro or can be used by laying hand over frame if some control is present. Adjustable clip to hold pen or utensil can be adjusted to any angle. T support with ball bearing rollers allow the hand to roll easily over the working surface. Writing board has two clips to hold paper in place. Adjustable size for children and adults....[More Information]
   
   
6. COMFORT UTENSIL HOLDER (MODELS BK1053, BK1054, BK1055) --- DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. --- Utensils holders of strong elastic band. Velcro pouch and velcro closure. Small, medium and large sizes....[More Information]
   
   
7. GRIP MATE (MODEL 75014) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Universal cuff gripping aid adjusts to a variety of positions. Holds any size utensil. Cylindrical. Can be weighted inside to dampen tremors. Adjustable strap aids in securing device to hand. Left or right hand....[More Information]
   
   
8. GRIPPY --- DISCONTINUED. (Verified 6/2005) RETTAINED IN DATABASE FOR REFERENCE. --- Grippy is a utensil, pen, and pencil holder designed for use by children and adults with fine motor or grasping disabilities. Made of non-toxic, latex-free PVC, these spiral grips wrap around pens, pencils, or paintbrushes or the handles of eating utensils, toothbrushes, combs, or brushes to provide a secure grip. The grips are dishwasher tolerant and retain their shape and color after washing. COLOR: Blue, green, yell...[More Information]
   
   
9. HANDY GADGET --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Universal cuff for individuals with limited hand mobility. Lightweight. Fabricated of support blade with small block double slotted to correct angles to hold writing instruments, etc. Can be used with existing proprietary wrist braces. Designer colors available. Weighs less than 3 ounces....[More Information]
   
   
10. PACK O' GRIPS (MODEL 4027) --- DISCONTINUED. (Verified 08/2012) RETAINED IN DATABASE FOR REFERENCE. ---Pack O' Grips, model 4027, is a set of triangular finger grips for use with pens, pencils, paint brushes, craft tools, and a variety of other utensils and tools. The soft grip provides a larger grasping surface and the triangular shape helps keep items from rolling. Each package of 14 includes assorted sizes and lengths. COLOR: Assorted....[More Information]
    
    
11. PLASTIC UTENSIL HOLDER (MODELS 87-1195 & 87-1196) --- DISCONTINUED. (Verified 4/2004) RETAINED IN DATABASE FOR REFERENCE --- Utensils holders of soft plastic or vinyl and velcro closures, palmar pocket for holding utensil....[More Information]
    
    
12. QUAD QUIP DORSAL FEEDING SPLINT (MODEL BK1080) --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- Plastic coated, steel feeding splint. 2 inch wide palmar cuff of Velcro loop which allows Velcro hook utensil holder to be angled and positioned as needed. Wrist extension changed by bending splint, Velcro straps on splint. Comes with utensil holder....[More Information]
    
    
13. QUAD QUIP UTENSIL HOLDER --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Shaped wooden handle with palmar pocket and velcro closure....[More Information]
    
    
14. QUAD QUIP UTENSIL HOLDER --- DISCONTINUED. (verified 1/96) RETAINED IN DATABASE FOR REFERENCE. --- Shaped wooden handle with palmar pocket and velcro loop closure....[More Information]
    
    
15. QUADCARE UTENSIL HOLDER (MODEL 21315) --- DISCONTINUED (Verified 11/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Quad-Care Utensil Holder is designed for persons with minimal hand strength or coordination and can be used with any fork, knife, or spoon. This adjustable device has a loop fastener that goes around the outside of the hand, a D-ring, and plastic tapered base which fits in the palm....[More Information]
    
    
16. ROLYAN UNIVERSAL CUFF (MODELS A721-5, A721-6, & A721-7) --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Rolyan Universal Cuff is a circumferential leather utensil cuff designed to assist people with quadriplegia and other upper extremity disabilities with grasping eating utensils and other items. The cuff is held in place with an elastic strap. Open on both ends, the pocket accommodates a wide variety of utensils. SIZES: Small (model A721-5 fits most women), medium (model A721-6 fits larger women and small/medium men)...[More Information]
    
    
17. SPRING CLIP TUBULAR ORTHOSIS FOR QUADRIPLEGIC HAND / TUBULAR ADL SPLINT --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. --- The Spring Clip Tubular Orthosis for the Quadriplegic Hand and Tubular ADL Splint is a long Opponens orthosis and utensil holder designed primarily for persons with high cervical spinal cord injuries. This metal forearm splint has clips that are activated by leaf springs incorporated into the hinges, which are arranged so that they will hold them either fully opened or securely closed. The opening is usually placed on th...[More Information]
    
    
18. TURN AROUND UNIVERSAL HOLDER (MODEL A866-1) --- DISCONTINUED (Verified 7/2001) RETAINED IN DATABASE FOR REFERENCE. ---The Turn Around Universal Holder, model A866-1, is a utensil holder designed to provide full adjustability and use of accessories by individuals with limited or no manual dexterity or strength due to quadriplegia, arthritis, muscular dystrophy, centeral nervous system disorders and other indications. Accessories such as a razor, writing instrument or utensil may be slid or snapped into a holder located on the palm side of ...[More Information]
    
    
19. UNIVERSAL ADL CUFF (MODEL H74975) --- DISCONTINUED. (Verified 7/96) RETAINED IN DATABASE FOR REFERENCE. --- The Universal ADL Cuff, Model H74975, is an adaptive leather pocket attached to an elastic strap designed to hold various utensils (i.e. toothbrush, eating utensils). The cuff may be used by persons with hand weakness or paralysis but with good wrist control. DIMENSIONS: .75 inches wide. SIZES: Small, Medium or Large....[More Information]
    
    
20. UNIVERSAL CUFF (MODELS 24140 & 24141) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Utensil holder made of Velcro hook and loop fastener, foam rubber, and plastic. Fully adjustable. Holds utensils, pencils, etc. Washable. Adult size (24140), pediatric size (24141)....[More Information]
    
    
21. UTENSIL HOLDER (MODEL H74970) --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Utensil holder with leather pocket and elastic slip on strap. Palmar pocket holds utensil. Three sizes, small, medium and large....[More Information]
    
    
22. UTENSIL HOLDER (MODEL PC7715) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Utensils holder has velcro closure. Palmar pocket holds eating utensil, toothbrush, etc. Comes in set of three....[More Information]
    
    
23. UTILITY HOLDER (MODEL GJ 3863) --- DISCONTINUED. (Verified 01/2013) RETAINED IN DATABASE FOR REFERENCE. ---Utensils holders of soft plastic and velcro closures, palmar pocket for holding utensil....[More Information]
    
    

Page 1 of 1