Products are listed alphabetically.

« Previous page    Page 3 of 5    Next page »

51. HANDLER, THE The Handler is a transfer aid designed for use with individuals with mobility disabilities during transfers to the commode, bed, or wheelchair.. The device is a strong polyurethane plastic sling that conforms to the individual's body and features two sets of handhold holes for appropriate hand placement during lifting. DIMENSIONS: 21.5 x 8.5 inches....[More Information]
    
    
52. HANDYBAR The HandyBar is a car transfer aid designed for use by individuals with arthritis, balance, or mobility disabilities. Made of forged steel with an ergonomic foam-cushioned handle, this device fits in the U-shaped door striker of most cars to create a handle for extra leverege to aide in getting out of a car. The device can also be used to break automobile windows or cut seat belts in the event of an emergency. CAPACITY: 350 pounds....[More Information]
    
    
53. IN-BED PATIENT POSITIONING SYSTEM (MODEL 55036) The In-Bed Patient Positioning System is a transfer aid designed to aid in positioning and turning individuals who spend extended periods in bed. The system includes a positioning pad with handles and two wedges that support the individual in the desired position. The pad features three layers: a poly-cotton top layer to wick away urine and other moisture, an absorbent foam center layer, and a liquid-proof vinyl barrier to protect the bed. The vinyl-covered bolsters support the side-lying indivi...[More Information]
    
    
54. IX TRANSFER SYSTEM -------- PROTOTYPE --------- PURPOSE: To design a prototype of a short distance transfer system for use by individuals with lower extremity and mobility disabilities, people with spinal cord injury and others who use wheelchairs, aided by a caregiver. The IX Transfer System is a transfer aid and transport wheelchair intended for short distance transfers that can be physically demanding on caregivers. It is designed to be used in communal spaces such as a hospital, skilled nursing centers or sim...[More Information]
    
    
55. KNEE SUPPORT FOR ORBITAL TRANSFER PLATFORM The Knee Support for Orbital Transform Platform is a knee cushion for a standing transfer aid designed for use by individuals with balance, lower extremity and mobility disabilities. Designed to be used with the Orbital Transfer Platform (see separate listing), this cushion is made of polyurethane and clamps onto the rear back rails of the transfer platform. DIMENSIONS: 350 x 160 millimeters....[More Information]
    
    
56. LEG LIFTER (MODEL DA-5150) The Leg Lifter, model DA-5150, is a transfer aid designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This device has a wrist loop at one end and a larger loop for the foot at the other. It extends the user's reach to assist in lifting legs onto or off a wheelchair or bed. DIMENSIONS: 41 inches long. WEIGHT: 87 grams....[More Information]
    
    
57. LEG LOOP LEG LIFT The Leg Loop Leg Lift is a transfer aid designed for use by individuals with lower extremity or mobility disabilities. Constructed of nylon webbing, this device has a foot support that stays open until the Leg Lift strap is pulled. The foot loop support conforms to the shape of the foot for a secure, comfortable grip during transfer onto a wheelchair, footrest, bed, or into an automobile. DIMENSIONS: The leg lifter is 41 inches long and the webbing is one inch wide....[More Information]
    
    
58. LIFTVEST The LiftVest is a transfer aid designed for use with individuals with balance and mobility disabilities. This vest-style garment features an attached webbing harness that provides a dozen different hand holds for caregivers to use during assisted transfers. Designed to distribute pressure over the whole torso, this garment eliminates pressure points, and the harness features eight different adjustments to comfortably fit all male and female body types. Because the vest is designed to be an attra...[More Information]
    
    
59. LOVEHANDLES (MODELS LH-18, LH-16, LH-14 & LH-20) LoveHandles is a transfer aid designed for use with individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. This device costists of a carbon frame with a seat and back support. Armrest-style tubular handles on each side and non-slip grips at each top corner of the backrest enable the individual in the device to be transferred by others to and from a pool, wheelchair, boat, automobile, airplane seat, up and down stairs, etc. The device come...[More Information]
    
    
60. MINISTRETCHER (MODEL 4017) The Ministretcher, model 4017, is a transfer aid designed for use in transfers of individuals with mobility disabilities in a lying position, mainly to and from an ambulance stretcher, a floor, or on stairs and in other cramped spaces. The unit has padding on each side of a flexible plastic board, which adapts to the shapes of ambulance stretchers, so the transfer aid can remain under patients for the entire journey. The plastic board also gives neck support under the head for safe lifting. DIME...[More Information]
    
    
61. MOVEMASTER PATIENT MOVER The MoverMaster Patient Mover is a transfer aid designed for use by individuals with mobility, lower extremity, or severe physical disabilities or spinal cord injury. This device is manufactured with silver ion antimicrobial built in for the life of the board. It features anti-pinch hand holes, anti-static inhibitors, and an ergonomic design. The unit is made from high-density stress-relieved polyethylene and is x- ray translucent. Model 2018 is a stretcher model and model 2022 is a hospital mod...[More Information]
    
    
62. MULTICHAIR 3000TX The MultiCHAIR 3000tx is a combined toilet chair, shower chair, and bathtub transfer bench designed for use by individuals with lower extremity or mobility disabilities. It has a nylon cloth back; an adjustable height raised toilet seat; a seamless padded self-skinning urethane seat cushion; two swing-away locking side arms; a swing-away transfer cushion kit; a drop rail on one side; suction cups for attaching legs to the bath or shower floor or for attaching the unit to the vertical face of the...[More Information]
    
    
63. MULTIMOVER The Multimover is a transfer aid designed for use with individuals with mobility disabilities. The device is a nylon tibe which is placed under an individual aid in positioning in bed. The double-layer design enables the top layer to slide over the bottom layer, repositioning the individual. The unit folds for carrying and includes instructions. DIMENSIONS: 47 x 28 inches....[More Information]
    
    
64. ORBITAL TRANSFER PLATFORM WITH KNEE SUPPORT (MODEL 805) The Orbital Transfer Platform with Knee Support, model 805, is a standing transfer aid designed for use by caregivers to assist individuals with balance, lower extremity, mobility and walking disabilities. Made with tensile steel, this device is designed to help transfer patients who can stand with support from one seated position to another. The person to be transferred stands on the platform at the base and holds on to the handles while facing the caregiver, then the caregiver tips the platfor...[More Information]
    
    
65. OUTTA BED Outta Bed is a bed mobility aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. This device can be positioned for right- or left-side use and mounts primarily to the bed frame of a standard home flat bed as well as to the floor and wall for added stability. This device can be used to assist in transfers to and from bed and to and from a wa...[More Information]
    
    
66. PARSONS SLIDE BUDDY (MODEL 14A089) The Parsons Slide Buddy, model 14A089, is a dual-purpose transfer aid designed for use in positioning and transferring individuals with mobility disabilities. The waterproof nylon slide side has a non-slip base that aids a caregiver in positioning the person when entering or exiting an automobile. The reverse side features slippery nylon and six hand holds to aid in transferring from a bed or sofa. DIMENSIONS: (LxW): 30 x 35 inches....[More Information]
    
    
67. PATIENT TRANSFER BELT The Patient Transfer Belt is a gait belt designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This machine-washable double-stitched nylon belt is sherpa-lined for comfort and features four grip point handles for security and to aid the care giver in using his/her legs and body weight during transfers. SIZES: Small/medium (fits waists 24 to 42 inches) or large (fits waists 33 to 52 inches)....[More Information]
    
    
68. PORTABLE OVERHEAD BAR --- DO IT YOURSELF ENTRY --- PURPOSE: To provide a portable, lightweight device enabling a person with limited upper body strength to change position in bed. The device was built from the strong but lightweight expandable tubing used in clothes closets. Quick release pins allow a vertical range from 3 to 4 feet and width range from 3 to 5 feet. The foldable legs are made of Lexan plastic. A canvas strap is pulled tight across the underside of the bed to make the whole unit stable. For travel, e...[More Information]
    
    
69. POSITIONING SLIDE The Positioning Slide is a tranfer aid designed to enable a single caregiver to independently move an individual from one side of a bed to the other. This lightweight, smooth, flexible slide is stain resistant and cleans with disinfectant. This latex-free slide features a self-adhesive hook for hanging. DIMENSIONS (LxW): 33 x 22 inches. WEIGHT: 7.8 ounces....[More Information]
    
    
70. PUSH-UP FRAME The Push-up frame is a transfer aid designed to assist individuals with mobility disabilities in rising from or lowering to a seated position. This metal frame slides under the user and has angled handles with foam padding to assist the user. The frame is collapsible for travel and storage. DIMENSIONS (DxWxH): 11 x 22.5 x 8 inches. WEIGHT: 3 pounds....[More Information]
    
    
71. QUICK-RELEASE GAIT BELT (MODELS 6524Q, 6528Q, & 6531Q) The Quick-Release Gait Belt is designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This machine-washable cotton belt is available in standard and extra-long styles and features a quick-release buckle. DIMENSIONS: The standard belt fits 24- to 52-inch waists and the extra-long belt fits 53- to 70-inch waists. COLOR: Model 6524Q is white, model 6528Q is navy, and model 6531Q is pastel bouquet (stripe)....[More Information]
    
    
72. RACING WHEELCHAIR STABILIZER ---DO IT YOURSELF ENTRY --- PURPOSE: To facilitate transferring a child to a racing wheelchair. The unit has a plywood base with a pipe frame at the front to hold the front wheel; the front wheel is further secured with a Velcro strap. This stabilizes the racing wheelchair for ease of transfers in and out with one person assisting. The half-inch thick plywood base is made to the size of the wheelchair, and excess material is removed to create a lighter weight base. The pipe frame consists of one...[More Information]
    
    
73. RETURN 7500 ReTurn 7500 is a manual transfer aid designed for use by individuals with mobility disabilities. This unit can be used to transfer individuals to or from beds, wheelchairs, or toilets. It rolls easily and can support a heavy user. OPTIONS: ReTurn Belt support belt....[More Information]
    
    
74. ROLL AID TRANSFER DEVICE. Light weight transfer board to assist in moving person from one level surface to another, can be used for up to 3 inch uneven heights. Four aluminum rollers on frame with steel ball bearings, vinyl roller cover. Attendant can slide person over rollers to complete transfer without lifting the person....[More Information]
    
    
75. SAFETYSURE TRANSFER BELT The SafetySure Transfer Belt is a manual transfer aid, gait belt, or walker belt for people with balance, lower extremity, mobility or walking disabilities. This belt has numerous hand grips to assist in transfers and gait training. It can also provide equestrian sidewalkers with a variety of leverage points. The anti-slip interior prevents the belt from moving. The easy-to-fasten "fix lock" buckle allows the belt to be tightened without having to open it. SIZES: Small (fits waists 23 to 36 inch...[More Information]
    
    

« Previous page    Page 3 of 5    Next page »