Products are listed alphabetically.

Page 1 of 2    Next page »

1. AQUA MATE POOL LIFT --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pool Lift for swimming pool access. Requires transfer to seat assembly, water hydraulic powered, stainless steel, portable. Attaches to 2 internal stainless steel deck sockets. All hoses attach with quick disconnect fittings. Lifts 300 pounds at 45 psi. Molded seat has two armrests, one flips up for transfers. Seat belt. Unit rotates 180 degrees....[More Information]
   
   
2. AQUANAIDS POOL LIFT (MODEL DA 0502) & MARK I --- DISCONTINUED. (Verified 12/2004) RETAINED IN DATABASE FOR REFERENCE. --- Pool lift with geared lifting mechanism with 35-1 ratio. No electric pneumatic or hydraulic connections. Can be used with stretcher attachment. Lift installed with in ground sleeve or surface mounted plate. Can be used with in ground or above ground pools. All immersible parts are high grade stainless steel or polypropylene. Maximum load 350 pounds. Includes braking device. Chair has caster base and wrap around arms....[More Information]
   
   
3. AQUANAIDS POOL LIFT (MODEL DA 0600) & MARK II --- DISCONTINUED. (Verified 12/2004) RETAINED IN DATABASE FOR REFERENCE. --- Pool lift with specially geared lifting mechanism (35-1 ratio) requires minimal physical effort. Includes braking system. No electric, pneumatic or hydraulic connections. Chair seat has wrap around arms . Lift is installed with 2 small deck anchors flush with deck surface. All immersible part are high grade stainless steel or polypropylene. Maximum load 350 pounds....[More Information]
   
   
4. ARJO MANUALLY OPERATED POOL LIFT. --- DISCONTINUED. (Verified 12/2004) RETAINED IN DATABASE FOR REFERENCE. --- Manually operated pool lift system for above ground or deck level pools. Pool lift transport chair attaches to lift. Fold back armrests for security. After chair is attached to lift chair base is removed. 4 swivel casters with brakes. Plastic and stainless steel. Optional leg support (like lawn chair). Optional large wheels for independent propulsion of chair base. Lift can be locked in any position. Optional stretcher ...[More Information]
   
   
5. ARJO OTTER PORTABLE POOL LIFT --- DISCONTINUED. (Verified 12/2004) RETAINED IN DATABASE FOR REFERENCE. --- Portable pool seat lift. Wheeled base for ease of storage. Claw feet fasten with T hooks into installation sockets at side of pool for stability. Fold back armrest for transfers. Foot operated locking plate automatically locks when in position over deck or water. Stainless steel mast and base assemblies. Molded plastic seat. Mechanical screw drive lift mechanism. Free wheel device stops chair lowering on obstruction. Lo...[More Information]
   
   
6. ARJO WATERHYDRAULIC POOLLIFTS --- DISCONTINUED. (Verified 12/2004) RETAINED IN DATABASE FOR REFERENCE. --- Water hydraulically height adjustable pool lift for above ground and deck level pools. Adjusted for individual pools. Stainless steel. Designed for use with chairs and stretchers facilitating transport and transfer. System A includes one height adjustable stretcher for transfer at bedside, and one chair. Both stretcher and chair are submersible. Hydraulically operated stretcher for transferring from either side of bed. ...[More Information]
   
   
7. CHENEY SWIM LIFT --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Used to lower wheelchairs into pool. Lifting capacity is 300 lbs. Lowering depth is 50 inches maximum. Platform size is 30 inches wide by 32 inches long. Speed is 25 feet per minute. Water hydraulic. When not in use lift folds out of the way. Clamp on lift to secure wheelchair. Support trusses can be customized to fit more space requirements. Adaptable to most pools without alteration to deck sides or gutters....[More Information]
   
   
8. CUSTOM SWIM LIFTS --- DISCONTINUED. (Verified 12/2012) RETAINED IN DATABASE FOR REFERENCE. --- Custom designed water power or hydraulic ram pool lifts. Custom designed water cylinders with non-corrosive barrel, stainless steel rod, and polyolefin end caps. Four way aluminum valve with 1/2 inch ports. 40 feet of intake and 10 feet of exhaust hose. Hydraulic rams have chrome plated innerpacks with self- contained reservoir. Internal flow control for speed regulation. Pushing jack handle against body or ram operates...[More Information]
   
   
9. ECONO LIFT --- DISCONTINUED. (Verified 12/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Econo-Lift, model EC-100, is a portable hydraulic lift designed to assist persons with disabilities to enter and exit most standard swimming pools. This model was designed for facilities that have only occasional need for handicap pool access. This manual lift is a sling-type lift with an open mesh, nylon sling seat. The lift is made of stainless steel structural components with a polished and buffed finish. Outward...[More Information]
   
   
10. FREEDOM-LIFT & FREEDOM-LIFT II --- DISCONTINUED. (Verified 12/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Freedom-Lift is a hydraulic-powered pool and spa lift designed to assist persons with disabilities to enter and exit hot tubs and above-ground pools. This fully automatic, adjustable lift has a water-powered drive system that is controlled by the user. The unit does not fasten to any portion of the spa and includes all necessary mounting hardware, hoses, plastic seat, seat belt, stationary inner arm, and pull-out le...[More Information]
    
    
11. GEG POOL LIFT. --- DISCONTINUED. (VERIFIED 05/93) RETAINED IN DATABASE FOR REFERENCE. --- Pneumatically powered pool lift. Molded fiberglass seat with flip up armrests, footboard. Velcro seatbelt. Seat rotates up to 355 degrees, preset at factory. Seat may be submerged 3 1/2 feet, 320 pounds, maximum load capacity. 115 or 230 volt. Control panel behind seat, attendant operated. Overall dimensions: 72 inches high, 69 inches wide. For indoor or outdoor pools, extensive renovations not required....[More Information]
    
    
12. HANDI MOVE POOLSIDE HOIST --- DISCONTINUED. (Verified 01/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Handi Move Poolside Hoist is a hydraulic is a permanently-installed pool lift designed for use with individuals with mobility Disabilities. This lift features stainless steel support arms, chest supports, and adjustable leg supports. OPTIONS: Slings, head supports, Handi Move frame. DIMENSIONS: Height to top of mast is 47 inches. The boom can be raised to a maximum of 94 inches and lowered to 5 inches....[More Information]
    
    
13. HOYER SLING POOL LIFT --- DISCONTINUED. (Verified 12/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Hoyer Sling Pool Lift is a hydraulic jack lifter designed to provide assistance for people with disabilities and entering and exiting pools. The lift must be installed in concrete, and is not interchangable with other lifter masts. It has a 65 inch lifting range, a 90 inch horizontal swing, and 40 inch chains for seat sling. CAPACITY: 400 pound capacity....[More Information]
    
    
14. IN-GROUND POOL LIFTS (MODELS IG14, IG21, & IG28) --- DISCONTINUED. (Verified 06/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Aquatic Access In-Ground Pool Lifts are water-powered pool lifts to help individuals that use wheelchairs or have other disabilities that would make it difficult for them to get in and out of a pool by conventional means (stairs or hopping in and out). These lifts can be installed into a single socket in the deck wherever it is suitable for wheelchair access, and can be self- operated or operated by an assistant. Si...[More Information]
    
    
15. LIFEGUARD POOL LIFT (MODEL 20A) --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. --- The Lifeguard Pool Lift, Model 20A, is a portable, hydraulic pool lift for people with disabilities. Mounts in permanently installed sleeve in pool deck. 62 inch lifting range on a 45 inch boom. Boom rotates user sitting in sling in either direction. Velcro straps, and extra sleeve available. CAPACITY: 400 pounds....[More Information]
    
    
16. LIFTER (MODEL 1.215) --- DISCONTINUED. (Verified 4/1998) RETAINED IN DATABASE FOR REFERENCE. --- Hydraulic patient lift for swimming pool use. Hydraulic pump may be turned on mounting for left or right hand use. Masts, carrying frames and bars are welded rectangular tubes. Corrosion resistant. Blue or white powder coating. Dismantles without tools. Fits in standard car trunk. Strap type seat and backrest standard. Lowering depth approximate 50 cm. below mounting for mast. Boom length 47 inches. Tip of boom lowest po...[More Information]
    
    
17. NOLAN POOL LIFT --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Water hydraulic pool lift. Self operated. Runs with household water pressure from a regular garden hose. No electricity. Unit bolts to pool deck in a portable (with wheels) or permanent installation. Molded seat automatically swings out 90 degrees over water. Upper and lower controls allow independent use. Travels four feet, adjustable to specific pool and deck. Stainless steel frame, mounts to variety of pool edges. Options: headrest, se...[More Information]
    
    
18. ORIGINAL SWIM LIFT --- DISCONTINUED. (Verified 12/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Original Swim-Lift (Model SL-100) is a platform lift designed to assist wheelchair users to enter and exit pools. The wheelchair fastens directly to the platform and lowers the user into the water. COMPATIBILITY: Fits most standard pools. POWER: The Swim- Lift is water powered from the nearest hose connection. CAPACITY: Maximum lifting capacity is 300 pounds. MATERIALS: Stainless-steel construction. WARRANTY: 3-year...[More Information]
    
    
19. PARA AID II POOL LIFT --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pool lift for swimming pool access. Sling type lift, oil hydraulic powered, stainless steel, portable. Standard mast type patient lift, inserts into socket mounted in deck, sling seat attaches to Y frame with chains. Available with chrom cylinder or painted cylinder....[More Information]
    
    
20. PARA AID POOL LIFT. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pool lift for swimming pool access. Sling type lift, water hydraulic powered, stainless steel, portable. Standard mast type patient lift, inserts into socket mounted in deck, sling seat attaches to Y frame with chains....[More Information]
    
    
21. POOL LIFT --- DISCONTINUED. (Verified 12/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Pool Lift is designed for swimming pools to help persons with mobility disabilities to enter and exit the water. The lift has a mast from the TransAid patient lift and a sling seat. An adapter sleeve is included for the deck of the swimming pool and the unit is cast in concrete or bolted to a floor adapter. The unit is self-operated, and uses water pressure for its lifting power; 2 gallons of fresh water is used for...[More Information]
    
    
22. POOL LIFT SS HSP (MODEL GJ 1748) --- DISCONTINUED. (Verified 01/2013) RETAINED IN DATABASE FOR REFERENCE. ---Hydraulic jack lifter, must be installed in concrete. Not interchangeable with other lifter masts. 65 inch lifting range, 90 inch horizontal swing., 40 inch chains for seat sling. 400 pound capacity....[More Information]
    
    
23. SWIM LIFT II. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pool lift for swimming pool access. Requires transfer to seat assembly, is water hydraulic powered, stainless steel, portable. Accommodates stretcher for severely disabled. Attaches to 4 deck sockets. Quick disconnect hose fittings. Lifts 300 pounds at 45 psi water pressure. Molded seat has one armrest, seat belt. Unit rotates 360 degrees....[More Information]
    
    
24. SWIM LIFT. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair lift for swimming pool access. Water hydraulic stainless steel with epoxy finish, portable, requires no transfers. Lifts 300 pounds at 45 psi water pressure. Can be used for indoor or outdoor pools. All hoses attach with quick connectors. 4 way control valve. Casters for transport of unit, front casters are folded up during use to prevent movement. Platform holds standard wheelchair, with side rails for added security....[More Information]
    
    
25. SWIM-LIFT II & DELUXE SWIM-LIFT II --- DISCONTINUED. (Verified 12/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Swim-Life II is a portable, water hydraulic powered pool lift designed for people with disabilities. The lift's adjustable polyolefin shims enable the base stand to always make contact with both deck and pool wall. The lift has a water cylinder, and a two position, four-way control valve. Two quick release stainless steel deck sockets on base remove without tools. The unit includes wheel stands for transport. The l...[More Information]
    
    

Page 1 of 2    Next page »