Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu
Skip to Quick Links

Foam Seat Cushion

Products are listed alphabetically.

« Previous page    Page 2 of 3    Next page »

  1. KOMFORT CUSHION --- DISCONTINUED. (Verified 1/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Komfort Cushion is a foam seat cushion designed for use with wheelchairs. The cushion has a contoured shape and a Visco-Foam ischial insert. The convex bottom enables the base to sit flat on sling upholstery. The cushion also has leg channels that compress to allow correct foot contact with the floor for those who use foot propulsion of the wheelchair....[More Information]

  2. LATEX FOAM WHEELCHAIR CUSHIONS --- DISCONTINUED. (Verified 2/93) RETAINED IN DATABASE FOR REFERENCE. --- Latex foam seat cushion. Washable fabric or vinyl covers. Sizes: 16 by 16 inches or 16 by 18 inches. Depth: 2, 3, or 4 inches....[More Information]

  3. MADDAK CUSTOM CUSHIONS (MODELS H76610 DIAMOND & H76613 MUSHROOM) --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Cushion is fabricated of 2 1/2 inch thick foam laminated to a seamless, elastic, waterproof covering. Can be formed to retain shape of wheelchairs, beds and other seating or reclining appliances. Comes in two shapes: diamond 65 by 38 inches or mushroom 49 (top) by 31 (bottom) by 73 inches long....[More Information]

  4. MODULTEX --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Foam seat cushion. 3 weights of foam: rigid foam base, firm around back sides for trochanter support, soft in center back for ischial support, and medium hard in front for thigh support. Flexible, air permeable cushion cover. Pressures; 60 mm Hg Trochanters, 80 mm under thigh. Cushion thicker in back. 3 sizes: 40 cm with 23 cm insert. 40 cm with 19 cm insert. 44 cm with 23 cm insert....[More Information]

  5. MOLDING FOAM CUSHION (MODEL 6522) Picture of MOLDING FOAM CUSHION (MODEL 6522) --- DISCONTINUED. (Verified 10/2012) RETAINED IN DATABASE FOR REFERENCE. --- The Molding Foam Cushion, model 6522, is a foam seat cushion designed for use with wheelchairs. The firm, convex foam bottom supports posture; the molding-foam top retains memory and helps distribute weight evenly. The cushion includes a wipe-clean, non-slip, water-repellent vinyl cover. DIMENSIONS (WxDxH): 18 x 16 x 3 inches....[More Information]

  6. ORTHOCARE WHEELCHAIR CUSHIONS --- DISCONTINUED. (Verified 03/93) RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair seat cushions or back cushions. Flat or wedged anatomically contoured designs. Made of Dynafoam high resiliency or economy grade foam. Covered with polyester cover which is removable for washing. Velcro straps to secure cushions to chair. Available in large variety of sizes, 3 or 4 inches thick....[More Information]

  7. PHARMASEAL BIOTHOTIC CUSHION (MODELS 2090 & 2091) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Foam seat cushion with molded base. Cushion has three parts. Molded urethane base provides series of pods and cones which are readily modified for customized pressure relief. Aerated. Easily cleaned. Non skid. Top foam cushion covers base. Base and foam covered by polypropylene cover which is breathable, non abrasive, stretchable and machine washable. Weighs less than 2.5 pounds. Cushion is 3/4 inches by 17 3/4 inches by 3 5/8 inches. Blu...[More Information]

  8. PHARMASEAL CONTOUR FOAM CUSHION (MODEL 2080) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Foam seat cushion which features a contoured cut out bottom. Closed cell foam. Cushion placed in wheelchair with cut out surface down to distribute pressure away from coccyx and ischial tuberosities 17.5 inches by 16 inches by 3 inches. Terrycloth covers sold separately available in blue, brown....[More Information]

  9. POSTURE COMFORT & ROTOTHORSIS --- DISCONTINUED. (Verified 01/2009) RETAINED IN DATABASE FOR REFERENCE. --- Foam seat cushion, constructed of foam segments in various densities. When configuration, thickness and type of foam is determined, design is returned to company to be fabricated into cushion. Cutout section can be designated on paper pattern. Washable cover with zipper, anchor straps to secure cushion to wheelchair. Features anti-hammocking of seat; Rotothorsis model corrects minor problems of posture. Posture Comfort ...[More Information]

  10. SCIMEDICS LUXAIRE --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Cushion is fabricated from medium density open cell polyurethane foam. It is lightweight and with a polyester knit cover. Sizes include: 16 x 16 x 3 inches, 18 x 16 x 3 inches, 16 x 16 x 4 inches, 18 x 16 x 4 inches....[More Information]

  11. SCIMEDICS POLYAIRE HR --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Cushion is of a high resiliency polyurethane foam. It is light weight and has a polyester knit cover. Comes with or without ischial cutout which is 7 inches wide by 9 inches deep. Sizes include 16 by 16 by 3 inches, 18 by 16 by 3 inches, 16 by 16 by 4 inches, 18 by 16 by 4 inches....[More Information]

  12. SCIMEDICS POSTUREFORM --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Cushion is made of several layers of laminated foams with an ischial and coccyx cut out. Available with vinyl or polyester knit cover. Sizes available: 16 x 16 x 3 inches, 18 x 16 x 3 inches, 16 x 16 x 4 inches, 18 x 16 x 4 inches....[More Information]

  13. SEAT AND BACK CUSHIONS --- DISCONTINUED. (Verified 04/2007) RETAINED IN DATABASE FOR REFERENCE. --- Cushions available with one, two or three inch density foam in the standard upholstery colors. Can be ordered with fabric or vinyl covers. Fabric covers zip open for laundering. Back cushions fasten to chairs with durable loops. Two sizes available. Seats: all three thicknesses, 16 inches wide by 16 inches deep, or 18 inches wide by 16 inches deep; backs: all three thicknesses, 14 inches wide by 18 inches in height, or ...[More Information]

  14. SEAT MATE (MODEL 7942) --- DISCONTINUED. (Verified 06/2006)RETAINED IN DATABASE FOR REFERENCE. --- The Seat Mate, model 7942, is a foam seat cushion with a cut-out designed to be used by individuals in wheelchairs. A washable cover completely encloses the foam. DIMENSIONS: 16 x 18 x 3 inches. COLOR: blue....[More Information]

  15. SEAT WEDGE CUSHION --- DISCONTINUED. (Verified 06/2006) retained in database for reference. --- The Seat Wedge Cushion is designed with a center groove for pressure relief. The wedge can be used rear-facing or front-facing. A zippered, washable case is included. DIMENSIONS: 16 x 16 inches....[More Information]

  16. SEAT, THE --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- Foam seat cushion with removable center wedge and cotton cover. DIMENSIONS: 14 x 16 inches and 16 x 18 inches....[More Information]

  17. SOFTPAW WHEELCHAIR CUSHION. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Foam wheelchair cushion. 16 by 16 inches or 16 by 18 inches. Available in 1, 2, 3, or 4 inch thicknesses. Slow recovery, flow fitting, shock absorbent, air can circulate through foam. Lightweight. Available in 4 degrees of firmness: mush, extra soft, soft and hard....[More Information]

  18. SPENCO DERMAL CUSHIONS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Foam seat cushion. Closed cell elastomer surrounded by siliconized hollow core fibers. Velour fabric on one side, Naugahyde on other. Available with full Naugahyde cover. 17 by 17 or 14 by 14 inches. Cleaned with soap and water or upholstery cleaner. Not autoclavable....[More Information]

  19. STAINLESS COMFY FOAM --- DISCONTINUED. (Verified 07/94) RETAINED IN DATABASE FOR REFERENCE. --- Comfy cushions are made of high resiliency foams of the expanded polyether type. Standard specifications are: 11 to 18 inches wide by 13 to 16 inches deep by 1 to 4 inches thick. Cushions can be ordered to any specifications: width, depth, thickness, selected density, medium or hard, or laminated in combinations of base and medium foam, or base and hard foam in selected thicknesses. Standard cover is double knit; special ...[More Information]

  20. SUN MATE FOAM CUSHIONS --- DISCONTINUED (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- A viscoelastic contouring foam wheelchair seat cushion. Open cell construction. Autoclavable or alcohol spray to sterilize. 1 to 4 inches thick. Options: waterproof finish, cotton velour cover, vinyl covered plywood base, and one piece foam with plywood base and all covered in vinyl upholstery. DIMENSIONS: 14 x 14 inches to 16 x 18 inches....[More Information]

  21. SUPPORO EGG CRATE WHEELCHAIR PAD WITH COVER --- DISCONTINUED. (Verified 4/2000) RETAINED IN DATABASE FOR REFERENCE. ---The Supporo Egg Crate Wheelchair Pad with Cover, model 648, is a foam seat cushion designed to provide extra support for wheelchair users. The support has a convoluted top surface to assist in the prevention of decubitus ulcers. DIMENSIONS: 46 x 46 x 5 centimeters or 46 x 46 x 8 centimeters....[More Information]

  22. SUPPORO FOAM WHEELCHAIR CUSHION (MODEL 651) --- DISCONTINUED. (Verified 4/2000) RETAINED IN DATABASE FOR REFERENCE. ---The Supporo Foam Wheelchair Cushion, model 651, is a foam seat cushion with vinyl cover designed to provide extra support to wheelchair users. DIMENSIONS: 41 x 41 x 5 centimeters or 41 x 46 x 5 centimeters....[More Information]

  23. SYNERGISTIC TRI PAD CUSHION (MODEL SSP 67) --- DISCONTINUED. (Verified 9/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Synergistic Tri Pad Cushion is a foam seat cushion and foam back cushion designed for use in wheelchairs. The cushion has cover of fire retardant, breathable NOMEX or leatherette, and is available in various sizes to fit wheelchair seat or back....[More Information]

  24. T FOAM CUSHION (MODELS LB842 TO LB847 & LB842S TO LB847S) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- T foam cushion. Can be used on chairs or wheelchairs as a decubitus protector. In soft, medium or hard densities, two or three inch thicknesses. Siliconized foam available. 16 by 16 inches or 16 by 18 inches. Custom sizes available....[More Information]

  25. THERAMAT --- DISCONTINUED. (Verified 2/1998) RETAINED IN DATABASE FOR REFERENCE. --- Theramat is a foam seat cushion designed for use in wheelchairs and other seating environments where long-term sitting is required. The cushion utilizes specially formulated foam of varying densities to equalize yield and pressure distribution to eliminate pressures and user fatigue caused by long-term seating. The cushion is available in regular, soft and ultra-soft firmness and includes a zippered cover in anti-microbi...[More Information]

« Previous page    Page 2 of 3    Next page »

Return to current products
  • Home
  • Alternate Layout
  • My AbleData
  • Contact
  • Site Map
  • A-Z Index
  • Help
  • Privacy

    • AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
    Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
    by ICF Macro under Contract No. ED-04-CO-0018/0007.

    The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.