Products are listed alphabetically.

« Previous page    Page 2 of 5    Next page »

26. CUSHIONS These Activeaid Cushions are foam seat cushions for wheelchairs made of 2, 3, or 4-inch thick vinyl Staph. The cushions are check covered and made of polyurethane foam. One model has a horseshoe cutout to relieve sacral pressure. A board seat insert is optional. SIZES: Adult (16 x 18 inches) and Junior (16 x 16 inches)....[More Information]
    
    
27. DELUXE SEAT SOLUTION The Deluxe Seat Solution is a foam seat cushion designed for use by individuals at risk for pressure sores/ulcers or who need support while seated. This cushion has an orthopedic wedge-shaped design that tilts lower back forward to restore a natural spinal curve, while a cut-away section relieves pressure on the tailbone and spine. This high-density poly/foam cushion has breathable fabric on one side and is wipe-clean and water-resistant on the other. The cushion has a built-in carrying handle. ...[More Information]
    
    
28. DELUXE WHEELCHAIR CUSHION (MODELS 7604, 7605, & 7606) The Deluxe Wheelchair Cushion (Pincore Latex Style Foam) is a foam seat cushion designed for those who need a little extra support. The high density foam coare will maintain resilience and will not crack or crumble. DIMENSIONS: 16 x 18 inches, with a thickness of 2, 3 or 4 inches. COLOR: Plaid....[More Information]
    
    
29. DROP SEAT AND CUSHIONS (MODELS 6540, 654020, 6541, & 6519) The Drop Seat and Cushions is a solid seat insert and a gel and foam or foam seat cushion designed to lower the height of wheelchair seats to enable self-propulsion using the feet or to enable the user to reach the footplates to stop sliding. This seat can be used with standard or hemi chairs and lowers the center of gravity, making the chair less likely to tip. This seat attaches to the frame in place of the standard seat without the use of tools. A drop seat gel and foam cushion to reduce the ...[More Information]
    
    
30. DURAFLOAT II CUSHIONS (01-2000 SERIES) Foam seat cushion, 10 pound density. For heavy duty flotation or hard use. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick, 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover....[More Information]
    
    
31. DYNA FLO Seat cushion of open cell foam, similar to T foam. Each cushion has progressive laminations of soft, medium and firm foam. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick; 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover....[More Information]
    
    
32. EXPRESS The Express is a foam wheelchair seat cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. The cushion is made of open-cell foam in two different densities, bonded together in opposing patterns to prevent the pelvis from going into a posterior tilt and sliding out of the chair. Closed-cell foam lateral pieces add increased stability or can be removed to adapt to a sling seat. The cushion comes with a front label, a nylon handl...[More Information]
    
    
33. FOAM WHEELCHAIR / GERI-CHAIR CUSHIONS (SERIES 7532) The Foam Wheelchair/Geri-Chair Cushions are foam seat cushions designed for use in wheelchairs or geriatric chairs. These high-density foam cushions provide sitting comfort and pressure relief and may be purchased without a cover, with a vinyl cover, or with a nylon cover. DIMENSIONS: Available in 16 x 18 x 2 inches, 16 x 18 x 3 inches, or 16 x 18 x 4 inches....[More Information]
    
    
34. FOAM WHEELCHAIR CUSHION (MODEL 6227) Foam wheelchair cushion fits all standard adult wheelchairs. 16 by 18 inches, 2 inches thick. Washable plaid cover....[More Information]
    
    
35. FOAM WHEELCHAIR CUSHION (MODELS 6476 THRU 6484) The Foam Wheelchair Cushion is a foam seat cushion designed for the comfort of individuals who use wheelchairs. The cushion is made of firm polyfoam. OPTIONS: Brown polyester/cotton fabric covers with Velcro closure available (5104-5112). DIMENSIONS: 16 x 16 inches, 16 x 18 inches, or 18 x 18 inches and 2, 3 or 4 inch thicknesses....[More Information]
    
    
36. FORMFLOAT II CUSHIONS (01-9000 SERIES) 3 layered foam seat cushion. Top layer is Dyna Flow foam, an open cell foam. Middle layer is High Density foam, and base is Tufloat foam. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick; 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover....[More Information]
    
    
37. GEO-MATT CONTOUR The Geo-Matt Contour is a foam seat cushion designed for wheelchair users who are at moderate risk of pressure sores. This cushion features the Geo-Matt design with more than 800 cells to respond independently to absorb pressure and minimize shearing plus ischial/coccygeal bucketing, contoured leg channels, and a center abductor. The cushion is encased in a wipe-clean Durafilm incontinence-proof coating. The cushion is available without a cover or with a choice of a vinyl facility cover with a n...[More Information]
    
    
38. GEO-MATT PRT The Geo-Matt PRT Is a foam seat cushion designed for use by active wheelchair users at low risk for pressure ulcers. This cushion features a top surface cut into a grid pattern. The individually-responsive cells reduce shearing and cradle bony prominences. Air pockets between cells create a Ring-of Air design to prevent heat and moisture build-up. A modification of the Geo-Matt design for this cushion creates a lower, firmer base than the Geo-Matt Therapeutic Seat Cushion (see separate entry) ...[More Information]
    
    
39. GEO-MATT THERAPEUTIC SEAT CUSHION The Geo-Matt Therapeutic Seat Cushion is a foam seat cushion designed for use by wheelchair users at low risk for pressure ulcers. This cushion features a top surface cut into a grid pattern. The individually-responsive cells reduce shearing and cradle bony prominences. Air pockets between cells create a Ring-of Air design to prevent heat and moisture build-up. The cushion is available without a cover, with a Soft Skin moisture barrier, with a fire-retardant Soft Skin, or with a vinyl and nylon...[More Information]
    
    
40. HI D LAMINATE CUSHIONS (01-8000 SERIES) Two layered foam seat cushion. Top inch is high density foam, base is Tufloat foam. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick; 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover....[More Information]
    
    
41. HI DENSITY FOAM CUSHION Hi Density Foam Cushions are foat seat cushions layered in 1-inch thick segments with a knit cover. DIMENSIONS: 16 x 18 inches with thicknesses of 1, 2, 3, or 4 inches....[More Information]
    
    
42. HIGH DENSITY CUSHIONS (01-4000 SERIES) High density foam seat cushion for medium flotation. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick; 18 by 16 inches by 2, 3, or 4 inches thick. 70 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover....[More Information]
    
    
43. HIGH SEAT CUSHION (MODEL 16H020) The High Seat Cushion, model 16H020, is a foam seat cushion designed for use by individuals with lower extremity disabilities. This cushion has a vinyl cover with a wood base. It is designed to take the stress off legs and knees by elevating seating levels when customary furniture heights are too low. It comes with an over the shoulder strap for carrying. DIMENSIONS (HxLxW): 16 x 16 x 4 inches....[More Information]
    
    
44. HIGH SEAT CUSHION (MODEL F76666) The High Seat Cushion, model F76666, is a foam seat cushion designed to take stress off the legs and knees by raising the seat to a comfortable level. The cushion is made of firm, 6-inch thick polyurethane foam, and comes with a denim cover with a cloth handle and zipper for removal. DIMENSIONS: 15 x 15 inches....[More Information]
    
    
45. HORSESHOE CUSHION. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Used to relieve pressure on the bony prominences of persons who lack normal sensation and are prone to develop pressure sores. Materials list and directions for making a foam cushion with horseshoe cutout in the back, used on top of a seat board for firm support. Similar to commercial products. Suggestions for a washable cover and anchoring tapes also provided. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than...[More Information]
    
    
46. INVACARE ABSOLUTE & INVACARE SINGLE-DENSITY CUSHION The Invacare Absolute is a foam seat cushion designed for use with wheelchairs. This dual-firmness cushion features firmer foam under the thighs and hips and softer foam under the ischials for good weight distribution and comfort. The Invacare single-density cushion is an economy version of this comfort cushion and is available in more than 100 non-standard sizes....[More Information]
    
    
47. INVACARE COMFORT-MATE EXTRA CUSHION AND BASE The Invacare Comfort-Mate Extra Cushion and Base is a foam seat cushion designed for use with wheelchairs. This contoured, lower-profile cushion has two layers of high-density molded foam for stability and pelvic support. Beveled sides enable the cushion to be used with a drop base. This cushion has a waterproof coating and comes with a waterproof cover with a non-slip bottom. OPTIONS: This cushion can be ordered with a built-in drop base which allows lower seat-to-floor heights to facilitate fo...[More Information]
    
    
48. ISCH-DISH PRESSURE RELIEF CUSHION The ISCH-DISH Pressure Relief Cushion is a multi-layered foam seat cushion designed to help prevent and heal pressure sores at the ischial and coccyx area. It is designed for use by persons with pressure ulcers, chronic sitting pain, or poor posture and positioning. Sized to fit the user's ischial span, the cushion features a washable, moisture-resistant cordura nylon cover with an elastic back, a moisture resistant core coating and a molded, removable sling-fill insert base. The cushion fea...[More Information]
    
    
49. ISCH-DISH SQUEEZE The ISCH-DISH Squeeze is a foam seat cushion designed for users of squeeze frame wheelchairs at risk for ischial and coccygeal pressure ulcers. This cushions are designed for use in squeeze frame chairs that drop three inches or more from knee to hip. A modified ischial pocket and pevic support extenders help counteract poor pressure distribution and pelvic positioning. The cushion includes a support core protected by a Durafilm incontinence-proof coating, a machine-washable cover, and a sling-f...[More Information]
    
    
50. ISCH-DISH THIN The ISCH-DISH Thin Cushion is a multi-layered foam seat cushion designed to help prevent and heal pressure sores at the ischial and coccyx area. It is designed for use in lightweight wheelchairs, hemi chairs, office chairs, and car seats by persons with pressure ulcers, chronic sitting pain, or poor posture and positioning. Sized to fit the user's ischial span, the cushion features a washable, moisture-resistant cover, a moisture resistant core coating and a molded, removable sling-fill inse...[More Information]
    
    

« Previous page    Page 2 of 5    Next page »