Products are listed alphabetically.

Page 1 of 4    Next page »

1. ADJUSTO TRAY (MODELS 90101300, 90191310, 90101315 & 90191260) --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Adjusto Tray, Models 90191300, 90191310, 90101315, and 90191260, is a lapboard designed for use by people who use wheelchairs. The plastic tray adjusts to fit wheelchairs 14 to 20 inches wide, and is available in four models, all of which include a continuous molded rim to prevent spills and keep objects from rolling off the tray. The standard tray, including a mounting bracket for one side to allow the tray to swing...[More Information]
   
   
2. ADJUSTS TRAY WITH RIM (MODELS 530, 531) --- DISCONTINUED. (Verified 07/93) RETAINED IN DATABASE FOR REFERENCE. --- Adjustable lapboard with rim. Fits all Everest and Jennings chairs up to 20 inches wide. Safety latch on side secures tray at desired location. Molded fiberglass. Full length and desk length arm styles....[More Information]
   
   
3. ADULT LAP TRAY (MODEL BK6061) --- DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. --- Woodgrained formica lapboard with rubber fasteners for armrests, D ring attached to make fastening easier. DIMENSIONS: 23 x 19 x 1/2 inch....[More Information]
   
   
4. BAC ADJUSTABLE TRAY --- DISCONTINUED. (Verified 05/94) RETAINED IN DATABASE FOR REFERENCE. --- Clear plastic lapboard fits BAC 3000 Wheelchair and BAC 3000 Stander Kit, as well as other manufacturers' wheelchairs. Installation requires drilling two holes into each of the chair arms. Lapboard then fastens onto arms with quick-release pins included with it. Position of mounting brackets adjust in width and depth. Tray is rectangular, designed for placement in front of child. Standard size 14" deep by 20" wide; custom...[More Information]
   
   
5. BORDERED WHEELCHAIR TRAY (MODELS 4020, 4021, 4022, & 4024) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair tray with variety of mounting options to fit securely on any wheelchair. Wood with choice of finishes. Standard size 24 inches by 30 inches. Options include plexiglass cover, elevating armrests, pistol handgrips, and scapula retraction inhibitor blocks. Custom sizes available. Special mounting available starting at $35....[More Information]
   
   
6. CHAIR TRAY --- DISCONTINUED. (Verified 10/96) RETAINED IN DATABASE FOR REFERENCE. --- Large fiberglass lapboard with raised edge, body cutout. 17 3/4 by 25 3/ 4 inches. Tray slips in and out of brackets on arms of wheelchair....[More Information]
   
   
7. CHILD DELUXE WHEELCHAIR WORKTRAY (MODEL 11DC) --- DISCONTINUED. (Verified 03/93) RETAINED IN DATABASE FOR REFERENCE. --- Deluxe polycarbonate wheelchair lapboard for children. 16 by 20 inches, 1/4 inch thick. 5/8 inch retaining edge and universal mounting system with telescoping support arms. Tray secured to arms by poly lock plastic tape fasteners. Custom stomach and control box cutouts can be made to individual patterns....[More Information]
   
   
8. CHILD POLYCARBONATE WHEELCHAIR TRAY (MODELS 11BC & 11CC) --- DISCONTINUED. (Verified 03/93) RETAINED IN DATABASE FOR REFERENCE. --- Child lapboard. Clear polycarbonate wheelchair work tray for children small size, 16 by 20 inches, 1/4 inch thick. With strap fasteners and D ring. Available with ABS plastic rim, 5/8 inch high by 1/8 inch wide....[More Information]
   
   
9. CLEAR CHOICE FULL-SIZE TRAY --- DISCONTINUED. (Verified 05/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Clear Choice Full-Size Tray is a lapboard designed for use by individuals who use wheelchairs. This clear polycarbonate tray helps provide support for proper positioning while creating work and eating space. The tray features a torso cutout and a seamless lip on three sides to prevent items from rolling. Velcro side straps are included. This tray attaches to wheelchairs with standard arms using brackets (sold separ...[More Information]
   
   
10. CLEAR ECONOMY TRAY (MODEL A7075) --- DISCONTINUED. (Verified 09/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Clear Economy Tray, model A7075, is a transparent lapboard designed to provide a work surface for people who use wheelchairs while maintaining visibility of the lower extremities. Of high-impact Lexan, the tray comes with D-ring hook-and-loop straps that thread through slots drilled in the tray to securely attach tray to armrests. Additional slots accommodate an optional back strap. DIMENSIONS (WxL): 23.75 x 22.25 i...[More Information]
    
    
11. CLEAR PLEXI TRAY (MODEL 3090) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Clear plexiglass lapboard with rim on 3 sides, body cutout. Velcro or adjustable height bracket. May be used with the responder chair, or other wheelchair. Arm protractor and elbow pads, $84.00 for 4 by 12 inch rectangular, $62.00 for 4 by 6 inch rectangular....[More Information]
    
    
12. CLEARFIT LAPBOARD --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Clear plastic lapboard gives unobstructed view of feet, clothing or obstacles. Attaches to wheelchair by Velcro straps, requires no screws. Upright supports are available for desk arms. Standard dimensions are 24 by 24 inches with a 15 by 9 inch semicircle body cutout. Standard thickness is 1/4 inch, heavy duty thickness is 3/8 inch. Custom sizes available....[More Information]
    
    
13. CLEARVIEW TRAY (MODELS 31184 & 31186) --- DISCONTINUED. (Verified 4/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Clearview Tray is a lapboard designed for use by people who use wheelchairs. The tray is fabricated from melamine impregnated fiber board with a see-through window of unbreakable polycarbonate at the front. The window is edged with a contoured PVC rim. SIZE: The tray is available in Child, Model 31184, and Adult, Model 31186, sizes. COLOR: Flaxseed. WARRANTY: The manufacturer warrants this product against defects in ...[More Information]
    
    
14. COMMUNITRAY (MODELS 140 & 142) --- DISCONTINUED. (Verified 03/93) RETAINED IN DATABASE FOR REFERENCE. --- Lapboard with communication board. Clear plastic with built in slot under tray to hold communication board overlays. Attaches to wheelchair with velcro straps. Two sizes: adult and child....[More Information]
    
    
15. DELUXE HEMI ARM REST --- DISCONTINUED. (Verified 04/2013) RETAINED IN DATABASE FOR REFERENCE. ---The Deluxe Hemi Arm Rest is an add-on armrest designed for use with wheelchairs. Available for the right or left side, this unit fits over the existing armrest and forms a half tray with a pre-formed depression for a cup or glass. Fully padded and covered with imitation leather, this add-on armrest can be lifted out of the way during transfers. COLOR: Black....[More Information]
    
    
16. DELUXE LAP TRAY --- DISCONTINUED. (Verified 07/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Deluxe Lap Tray is a lapboard designed for use with wheelchairs. This tray attaches to most wheelchair arms using two straps (included) and it features an easy-to-clean Formica surface with rounded corners. OPTIONS: Removable Rim for Lap Trays (see separate entry). DIMENSIONS: The straps are 1 x 16 inches and the tray is 22.75 x 22 3/8 inches. COLOR: Woodgrain....[More Information]
    
    
17. DELUXE POLY-CARBONATE WHEELCHAIR TRAY (MODEL 11D) --- DISCONTINUED (Verified 9/2012). REPLACED BY THE RHINO TRAY(MODELS 11A & 11B). RETAINED IN DATABASE FOR REFERENCE. --- The Deluxe Poly-Carbonate Wheelchair Tray, model 11D, is a wheelchair lapboard and work tray for children and adults. The tray includes a universal mounting system, continuous 5/8-inch high lip/retaining edge; telescoping support arms for strength and convenience; a rim that is fused into the plastic tray for added strength without added weight; and captive locking knobs. The...[More Information]
    
    
18. DURABLE PLAY TRAY (MODEL 31138) --- DISCONTINUED. (Verified 4/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Durable Play Tray, model 31138, is a lapboard designed for use with MacLaren, Pogon, and other umbrella strollers. The lapboard is constructed of .25-inch thick hardboard with a woodgrain vinyl top, and attaches with coated metal hardware. DIMENSIONS: 20.5 x 14 .75 inches deep; the cutout for the trunk is 11 x 2.75 inches. WEIGHT: 4 pounds. WARRANTY: The manufacturer warrants this product to be free of defects in mat...[More Information]
    
    
19. DURATRAY SERIES --- DISCONTINUED. (Verified 4/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Duratray Series are lapboards designed for use by people who use wheelchairs. Fabricated of particle board with a woodgrain vinyl top and painted bottom, the juvenile tray has an oblong surface, and the other models have rectangular surfaces. All models have a mini-rim of black plastic T-molding that seals the edges, and a torso cutout. Three models are available: tray only and tray and strap models, and the tray wit...[More Information]
    
    
20. ECONOMY LAP TRAY --- DISCONTINUED. (Verified 07/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Economy Lap Tray is a lapboard designed for use with wheelchairs. The full-sized tray features a tempered Masonite surface and straps to the arms of most standard wheelchairs. OPTIONS: Removable Rim for Lap Trays (see separate entry). DIMENSIONS: 22.75 x 22 3/8 inches....[More Information]
    
    
21. ECONOMY LAP TRAY (MODEL BK6064) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Tempered, 1/4 inch masonite lapboard with velcro strap attachment, 23 inches wide by 19 inches deep with body cutout....[More Information]
    
    
22. ECONOMY TRAY (MODELS 63564 & 63565) --- DISCONTINUED (Verified 11/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Economy Tray is a lapboard that attaches to the armrests of a wheelchair. The tray is made of masonite; all edges and corners are rounded to minimize chipping. Extra long Velcro straps wrap around the wheelchair armrests to secure the tray. Economy Tray with Straps (no. 63564, $13.95) and the Economy Tray with Straps and Pads (no. 63565, $16.95) are available. DIMENSIONS: 23.5 x 22 x .25 inches....[More Information]
    
    
23. ELLIS WHEELCHAIR TRAY (MODEL F70600-1000) --- DISCONTINUED. (Verified 04/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Ellis Wheelchair Tray, model F70600-1000, is a lapboard designed to be utilized by wheelchair users. This tray attaches to wheelchair arms with holding clamps and features a work surface with an adjustable curved cutout and three raised edges. The sides are made of a durable plastic with recesses for pens, pencils, and utensils. Hook and loop fastener strips securely hold the tray in place. The tray can be removed ...[More Information]
    
    
24. FUTURO UNIVERSAL WHEELCHAIR TRAY (MODEL 3627) --- DISCONTINUED. (Verified 2/2004) RETAINED IN DATABASE FOR REFERENCE. --- Lapboard. Formed plastic surface with walnut finish, raised edges on all sides, Velcro straps to hold tray in place on wheelchair. 3627 fits adult and medium size wheelchairs, 24 inch width, 20 inch depth....[More Information]
    
    
25. GAME TRAY (MODEL 31079) --- DISCONTINUED. (Verified 4/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Game Tray, Model 31079, is a lapboard and board game designed to provide a hard, flat surface on which wheelchair users nay play games. The plastic tray has a 5- compartment storage area with a hinged checkerboard lid, a cribbage board, and a cup recess. Game pieces for chess, checkers, and cribbage are included. OPTIONS: A metal lid for use with magnetic letters or magnetic playing cards is also available. COLOR: C...[More Information]
    
    

Page 1 of 4    Next page »