Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu
Skip to Quick Links

Products are listed alphabetically.

« Previous page    Page 4 of 4

  1. TUMBLE FORMS JIFFEE DESK (MODEL 4583Z) --- DISCONTINUED. (Verified 01/94) RETAINED IN DATABASE FOR REFERENCE. --- Jiffee Desk. Fits any size wheelchair with flat surface arms. Attaches onto arm by Velcro fastener. Requires no hardware. Durable non slip Tumble Forms coating covers desk surface. Raised rim prevents items from rolling off. 24 by 24 inches....[More Information]

  2. UNIVERSAL TRAY. --- DISCONTINUED. (Verified 2/2004) RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair tray, 12 by 16 inches, has L shaped rod that attaches tray to wheelchair arm. Tray folds down beside wheelchair....[More Information]

  3. UNIVERSAL WHEELCHAIR TRAY (MODEL 4422 x 20 ADULT) --- DISCONTINUED. (Verified 03/93) RETAINED IN DATABASE FOR REFERENCE. --- Lapboard fits any adult, narrow adult or junior chair. Width 23 3/4 inches, depth 21 1/2 inches. Cut out is 8 3/4 inches deep by 15 inches wide. No brackets, screws or hardware. Lapboard is placed on arms of chair and Velcro strap is wrapped around arm and secured at top of tray. Tray is made of plastic laminate with walnut finish. Aluminum rim edge is extruded....[More Information]

  4. VARIFIX MULTIPURPOSE TRAY. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Swingaway lapboard consisting of 12 by 8 1/2 inch double laminate plywood tray and 12 3/8 by 8 5/8 inch l shaped rod 3/8 inch diameter. One end of rod attaches to plastic clamp under tray; other end attaches to surfaces 5/16 to 1 3/8 diameter of flat surfaces 1/8 to 1 1/4 inches without friction pads. Tray adjusts vertically, laterally and can rotate 360 degrees. Two tray tops can be used simultaneously on one wheelchair arm and set at di...[More Information]

  5. WHEELCHAIR TABLE --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wooden lapboard for wheelchair, folds in half, fits in carrying case. Attaches to wheelchair arms with velcro straps....[More Information]

  6. WHEELCHAIR TRAY (HALF & FULL TRAY MODELS) --- DISCONTINUED (Verified 09/96) RETAINED IN DATABASE FOR REFERENCE. --- Lapboard for wheelchairs. Full tray spans over both armrests, half tray attaches to one armrest and extends only slightly into lap area. Available in polycarbonate or acrylic. Velcro straps attach tray to armrests, non-slip channels. One inch rims, flat with no sides or wood trim available. Reuseable drawing board inserts into tray with side rims. Half tray, order right or left. Custom trays available, custom attachments....[More Information]

  7. WHEELCHAIR TRAY (MODEL 63570) --- DISCONTINUED (Verified 11/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Wheelchair Tray (no. 63570) is a lapboard that attaches to the armrests of a wheelchair. The tray is moisture resistant, made of tempered hardboard with a vinyl woodgrain top. DIMENSIONS: 23.5 x 22 x .25 inches....[More Information]

  8. WHEELCHAIR TRAY (MODEL BK6074) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Fiberglass lapboard attached to anodized aluminum frame. Can be moved forward or backward on telescoping side tubing mounted on wheelchair armrest. Tray, 17 1/2 to 13 inches with 1 inch high rim. Swings away. Self-storing on side of wheelchair....[More Information]

  9. WHEELCHAIR TRAY (MODEL K63564 & K63565) --- DISCONTINUED (Verified 11/2001) RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair Tray, Model K63564 & K63565, is a lapboard designed for persons with lower extemity disabilities using wheelchairs. The masonite wheelchair tray features extra long Velcro straps to wrap around armrests and the edges are rounded to minimize chipping. Two versions are available including one with extra padding to prevent it from slipping on armrests. Both easily wipe clean. DIMENSIONS: 22 inches x 23.5 inches....[More Information]

  10. WHEELCHAIR TRAY (MODELS 240, 250, & 230) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lapboard or tray for wheelchair. Velcro strap attachment to wheelchair arms. Oak veneer with raised rim (240), clear lexan plastic (250), or baked enamel with raised rim (230). 3 widths fit wheelchairs 16 inches, 18 inches, or 22 inches wide....[More Information]

  11. WHEELCHAIR TRAY (MODELS 4042 & 4040) --- DISCONTINUED. (Verified 06/2006)RETAINED IN DATABASE FOR REFERENCE. --- The Wheelchair Tray, models 4042 and 4040, is a plastic laminated lapboard with Velcro straps which attach to the armrests of the wheelchair. Sizes: adult, 24 x 20 inches; child, 20 x 18 inches....[More Information]

  12. WHEELCHAIR TRAY CLEAR ACRYLIC (MODEL H70600) --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Clear plastic lapboard with front and side rims. Velcro strap attachment. 3/8 inch thick. 24 by 21 5/8 inches. Provides unobstructed view of feet and obstacles....[More Information]

  13. WHEELCHAIR TRAY SYSTEM. --- DISCONTINUED (Verified 02/93) RETAINED IN DATABASE FOR REFERENCE) --- Wheelchair tray system made of light, heavy duty clear polycarbonate. See through trays have velcro chair arm straps; are available in three sizes: Basic Adult Wheelchair Tray, measures 23 inches by 19 inches, has cutout 7 inches by 15 inches; Large Adult Wheelchair Tray, measures 24 inches by 23 inches, has cutout 8 inches by 16 inches; Pediatric Wheelchair Tray, measures 20 inches by 19 inches, has cutout 8 inches by 12 ...[More Information]

  14. WHEELCHAIR TRAY, WORKSTATION (MODEL M2 28) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair tray. Rigid, clear plastic, high strength 0.25 inch polycarbonate tray with metal rim. Attaches with velcro straps to any standard wheelchair. Cannot be used if joystick control is on armrest. 19 by 24 inches....[More Information]

  15. WOODLINE LIGHT SERIES Picture of WOODLINE LIGHT SERIES --- DISCONTINUED. (Verified 4/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Woodline Light Series are lapboards designed to be attached to wheelchairs. The trays are constructed of 7-ply Finnish birch plywood with a clear lacquer finish. The juvenile tray has an oblong design; the other trays are square. Models available include the tray only, tray with 3-piece wood rim, tray with straps, and the tray with rim and straps. SIZES: All models are available in child, juvenile, adult, and Extra-...[More Information]

  16. XL WHEELCHAIR TRAY AND BRACKET --- DISCONTINUED (Verified 7/2000) RETAINED IN DATABASE FOR REFERENCE. --- XL Wheelchair trays and brackets are lapboards and mounting hardware designed for use with a variety of armrests. The trays are constructed of clear polycarbonated, stained and finished hard wood, or laminated fiberboard and feature smooth surfaces with retaining lips to prevent articles from rolling. The brackets feature adjustable width and quick-release lever attachment and removal. The brackets secure to the tray via ...[More Information]

« Previous page    Page 4 of 4

Return to current products
  • Home
  • Alternate Layout
  • My AbleData
  • Contact
  • Site Map
  • A-Z Index
  • Help
  • Privacy

    • AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
    Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
    by ICF Macro under Contract No. ED-04-CO-0018/0007.

    The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.