Products are listed alphabetically.

Page 1 of 1

1. CONQUEROR 1000 -- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. -- Adult rigid frame wheelchair with standard solid seat and back panels. Standard one piece non-adjustable back has 20 inch height. Seat widths of 14, 16, 18 and 20 inches are available with a standard depth of 16 inches. Custom seat depths ranging from 14 to 20 inches in 1 inch increments are available at additional cost. Tilt in space is adjustable within a 42 degree range in 4 1/2 degree increments, operated from the rear with a trigger re...[More Information]
   
   
2. ENDURO ENCORE 1 AND 2 --- DISCONTINUED. (Verified 9/2003) RETAINED IN DATABASE FOR REFERENCE. --- The Enduro Encore 1 and 2 are adjustable adult tilt-in-space reclining wheelchairs designed to allow the user to change position without leaving the chair. FRAME: Rigid titanium frame with an optional fold-down back. Push handles and adjustable, kick-up anti-tippers are included. SEAT: The orientation in space is controlled by cable activated struts operated from the push handles. A fully reclining back, angle-adjustable...[More Information]
   
   
3. ENDURO OPTIMA --- DISCONTINUED. (Verified 9/2003) RETAINED IN DATABASE FOR REFERENCE. --- The Enduro Optima is an adjustable, child tilt-in-space, reclining wheelchair designed to grow with the user. FRAME: Lightweight, expandable, rigid titanium frame in a choice of 8 colors. An optional fold-down back is offered. Push handles and adjustable, kick-up anti-tippers are included. SEAT: The seating system incorporates a tilt-in-space feature that allows the correct positioning of the seat and back while angling ...[More Information]
   
   
4. ENDURO OPTIMA IC (INFANT CONVERTIBLE) --- DISCONTINUED. (Verified 9/2003) RETAINED IN DATABASE FOR REFERENCE. --- The Enduro Optima IC (Infant Convertible) is a seating system on a wheeled base designed to be converted to a child tilt-in-space wheelchair. The Optima IC consists of a infant travel seat attached to an Optima (see separate entry) tilt-in-space frame. The unit includes a matching diaper bag. FRAME: Rigid, expandable titanium frame in a choice of 8 colors. The frame includes expansion capability, allowing a seat width ra...[More Information]
   
   
5. GELART XTRA --- DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Gelart EXTRA is a multi-adjustable postural management seating and standing system on a wheeled base designed for use by children with cerebral palsy, spina bifida, and similar movement disabilities. The XTRA grows with the child from age one to eight, moves from high to low, offers a variety of positions, and tilts in space. SEAT: Seat width ranges from 6.4 inches to 11.2 inches; the seat depth ranges from 5.5 inch...[More Information]
   
   
6. GUNNELL CHUTE CHAIR. --- DISCONTINUED. (Verified 4/93) RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair for person whose hips and/or leg limitation will not allow use of regular wheelchair and footrest. Fiberglass bucket seat mounted on a folding chrome wheelchair frame with adjustable, reclining back. Includes back and seat pads of foam and naugahyde, 8 inch front casters, 24 inch rear drive wheels, wheel locks, and extended push handles. Wheelchair options can be adapted to the chute. Frame has 20 inch wheelbase...[More Information]
   
   
7. GUNNELL POSITIONING CHAIR (MODEL FGP) --- DISCONTINUED. (Verified 4/94) RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair with 2 piece fiberglass bucket seat. Variable seat to back angle from 75 to 180 degrees mounted on folding chrome frame. Seat can be reclined without changing angle of hip to back and footrest. One piece ABS plastic footrest adjusts from 80 to 170 degrees in relation to seat, plus height adjustment. 24 inch rear drive wheels and 8 inch front casters. 1 inch back cushion and 2 inch seat cushion and hip pads. Hip ...[More Information]
   
   
8. GUNNELL RELAXATION CHAIR MODEL FGR. --- DISCONTINUED. (Verified 4/93) RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair with one piece fiberglass bucket seat with fixed hip to back angle, mounts on folding chrome frame, seat can recline from 90 to 45 degrees. One piece ABS plastic footrest can adjust from 80 to 170 degrees in relation to seat plus height adjustment. 24 inch diameter rear wheels and 8 inch diameter front casters, 1 inch back cushion and 2 inch seat and hip cushions of foam and naugahyde, hip belt, and wheel locks....[More Information]
   
   
9. LASER TILT-IN-SPACE --- DISCONTINUED (Verified 7/2000) RETAINED IN DATABASE FOR REFERENCE. --- The Laser Tilt-in-Space is a child's wheelchair designed to grow as the user does. FRAME: The folding frame is constructed of 6061-T6 drawn aluminum tubing and features a telescoping crossbrace which allows the width of the chair to be expanded up to 4 inches. Rear anti-tippers and adjustable-angle push handles are included. The frame has an electrostatic powder coat finish available in a choice of 14 colors. SEAT: The de...[More Information]
   
   
10. REAR WHEEL DRIVE TYKE IC (INFANT CONVERTIBLE) --- DISCONTINUED. (Verified 9/2003) RETAINED IN DATABASE FOR REFERENCE. --- The Rear Wheel Drive Tyke IC (Infant Convertible) is a seating system on a wheeled base using an infant travel seat designed to be converted to a standard Rear Wheel Drive Tyke child wheelchair (see separate entry). A diaper bag is included. FRAME: Expandable rigid titanium growth frame in a choice of 8 colors. Stroller handles and adjustable kick-up anti-tippers are included. The frame expands to accommodate a seat wid...[More Information]
    
    
11. SNUG BUGGY HEAVY DUTY FOLDING BASE --- DISCONTINUED. (Verified 5/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Snug Buggy Heavy Duty Folding Base is a folding stroller base for use with Snug Seat I seating systems (see separate entry). The base is designed for use over nearly all pedestrian terrain. FRAME: The frame is made of 7/8-inch tubular steel with a polyester powder coat finish. A foam- padded handle push handle is standard. Metal seat restraining brackets enable the Snug Seat 1 to be secured to school bus tie-down sys...[More Information]
    
    
12. TIGER --- DISCONTINUED. (Verified 3/2013) RETAINED IN DATABASE FOR REFERENCE. --- Tiger is an upright prone angle positioning chair designed for use by children ages nine months to four years with low tone or postural weakness. The prone sitting position places hips in an anterior tilt and encourages reaching and extending forward. Padded lateral supports and the activity tray are height-, depth-, and angle-adjustable to improve arm support and function. A Velcro-attaching chest pad, a chest security...[More Information]
    
    
13. VARI CHAIR SEATING SYSTEM --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Attendant propelled chair and seating system. Adjusts to accommodate heights from 4 feet 1 inch to 6 feet 4 inches. Adjustable support mechanisms for areas of muscle weakness or skeletal deformity. Pneumatic assist, multi position seating allows frequent positioning changes. Features reclining seatback, multi position headrest and cervical spine support, adjustable legrests and armrests, thoracic support, adjustable height and width, remo...[More Information]
    
    
14. VARI-CHAIR ---- DISCONTINUED. (Verified 3/2000) RETAINED IN DATABASE FOR REFERENCE. --- The Vari-Chair is an adaptive seating system on a wheeled base that is adjustable in height, length, and width. Specifically, all of these components of the Vari-Chair are adjustable: seat length, seat lateral wideth, leg rest, back recline, lower back support, lateral trunk supports, upper back support, arm rest, cervical and head support, and seat incline. The Vari-Chair will adjust to fit patients from 4 feet 11 inch...[More Information]
    
    
15. WIZARD PEDIATRIC WHEELCHAIR --- DISCONTINUED. (Verified 5/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Wizard Pediatric Wheelchair is a seating system on a wheeled base designed to grow with a child from age 1 to 10 without requiring the purchase of a growth kit. Safety features of the chair include child-proof seat insert lock-out, tilt-in-space cath, and footrest pan lock-out. FRAME: The frame is made of steel tubing with an epoxy powder coat finishes in white or purple. The frame height (handle to floor) is 36 inch...[More Information]
    
    
16. XL CHALLENGER --- DISCONTINUED (Verified 7/2000) RETAINED IN DATABASE FOR REFERENCE. --- The XL Challenger is an adult tilt-in-space wheelchair designed for maneuverability. FRAME: The rigid, lightweight base is constructed of drawn aluminum tubing and features rear anti-tippers and an electrostatic powder coat finish in a choice of 14 colors. SEAT: The quick-release seating system features a rotational center of gravity and variable tilt to 45 degrees. The seat is available in 14, 16, 18, and 20-inch widths ...[More Information]
    
    
17. XL TRACER --- DISCONTINUED (Verified 7/2000) RETAINED IN DATABASE FOR REFERENCE. --- The XL Tracer is a child's lightweight wheelchair designed to grow with the user. FRAME: The folding frame is constructed of drawn aluminum tubing and features telescoping components to accommodate growth and height- and angle-adjustable, folding push handles. The frame is also designed to allow the option of front or trailing casters. Optional anti-tippers are available at no charge. The frame has an electrostatic powder...[More Information]
    
    
18. ZEBRA PUSH-CHAIR --- DISCONTINUED. (Verified 4/1998) RETAINED IN DATABASE FOR REFERENCE. --- The Zebra Push-Chair is a stroller designed to be adjustable for a number of different positioning needs of growing children. It is available as a complete unit with a thickly padded, firm seat and back, or may be used with the purchaser's own specialized seating mounted in the frame. The chair has a seven-position, reclining back, and moveable cross bars to allow repositioning of the seat height and orientation in spa...[More Information]
    
    

Page 1 of 1