Products are listed alphabetically.

Page 1 of 1

1. 12 INCH ALUMINUM RULER --- DISCONTINUED. (Verified 1/2011) RETAINED IN DATABASE FOR REFERENCE. --- The 12 Inch Aluminum Ruler is a Braille and tactile rule for individuals who are blind or have low vision. The ruler is conveniently marked with one dot at every quarter inch, two dots at every half inch and three dots plus a Braille number at every inch. DIMENSIONS: Ruler is 12 inches....[More Information]
   
   
2. 12 INCH BRAILLE RULER -- Discontinued. Verified 3/2012. Retained in database for reference. -- The 12 Inch Braille Ruler is a tactile and Braille rule for individuals who are blind or have low vision. This plastic ruler is designed with bold black lines for those with low vision. It also has Braille symbols and raised numerals for those who are blind. DIMENSIONS: Ruler is 12 inches. Numbers are 1/4 inch high and 2 inches wide....[More Information]
   
   
3. 12 INCH BRASS RULE (MODEL TS 186) --- DISCONTINUED. (Verified 04/93) RETAINED IN DATABASE FOR REFERENCE. --- One foot stamped brass rule, with every inch indicated by three raised dots and by Braille numerals. Every 1/2 inch indicated by double raised dots, every 1/4 inch indicated by a single raised dot....[More Information]
   
   
4. 12-INCH TACTILE RULER --- DISCONTINUED. (Verified 11/2012) RETAINED IN DATABASE FOR REFERENCE. --- The 12-Inch Tactile Ruler is a tactile rule designed for use by individuals who are blind or who have low vision. The ruler features braille symbols and raised numerals. DIMENSIONS: 12 inches long....[More Information]
   
   
5. 20 FEET STEEL TAPE MEASURE (MODEL T90220) --- DISCONTINUED (verified 12/95) RETAINED IN DATABASE FOR REFERENCE. --- The 20 Feet Steel Tape Measure, Model T90220, features each foot brailled-marked, and each 6 inch has a raised dot on the lower edge that lines up with the end of the 6 inch tactually marked extension. The flexible steel rule has pushbotton controlled blade return, a positive blade locking and a removable belt grip....[More Information]
   
   
6. FOLDING BOXWOOD RULE (MODEL T90300) --- DISCONTINUED (verified 12/95) RETAINED IN DATABASE FOR REFERENCE. --- The Folding Boxwood Rule, Model T90300 is a ruler made from wood that is hinged to fold into four 6 (six) inch sections. A single tactile dot is used to mark each inch and a higher raised dot is used every 1/2 inch. Braille is used to indicate each number....[More Information]
   
   
7. LUFKIN 25 FOOT STEEL TAPE (MODEL TM 215) --- DISCONTINUED. (Verified 04/93) RETAINED IN DATABASE FOR REFERENCE. --- Steel ruler. First 11 inches are marked with a raised dot at each inch, two raised dots at 12 inches. Remainder of the tape has been marked with one raised dot at each foot interval, two raised dots at 5 feet, 15 feet and 25 feet and three dots at 10 feet and 20 feet. An end hook is attached for convenience in measuring. Tape is wound back into case after use....[More Information]
   
   
8. ROTOMATIC RULE (MODEL D90320) --- DISCONTINUED (verified 12/95) RETAINED IN DATABASE FOR REFERENCE. --- The Rotomatic Rule is a tactile aluminum rule which can easily be read to 1/64 inch for individuals who are visually impaired. A rectangular nut is threaded on the rod. As the nut is backed away, each 1/4 turn (easily checked by the mark on the nut) represents an additional 1/64 inch. Lock nut for setting and holding any dimension. One end of the rule is threaded to receive extension rods. DIMENSIONS: The rule is six inche...[More Information]
   
   
9. STANLEY CALIPER RULE (MODEL TM 205) --- DISCONTINUED (verified 12/95) RETAINED IN DATABASE FOR REFERENCE. --- The Stanley Caliper Rule, Model TM 205 has a sliding jaw,a raised scale graduated in 1/8 inch marks indicated by a single raised dot. For quick reading, the 1/2 inch mark has double raised dots and 1 inch mark has three raised dots for inside and outside measurement. The stationary jaw has double raised dots on the face to indicate inside and outside measurements....[More Information]
   
   
10. STEEL TAPE MEASURE -- Discontinued. Verified 8/2012. Retained in database for reference. -- The Steel Tape Measure is a tactile rule designed with brailled markings for individulas who are blind or have low vision. It is a flexible, adapted steel rule with push button controlled blade and blade locking. The rule has a six inch extension that allows for measurments to 1/8 inch tactually. There are Braille markings at each foot and at each 6 inch measurement a single raised dot on the lower edge that lines up with t...[More Information]
    
    
11. TACTUAL MEASURING DEVICE (23-9911-2) & METRIC TACTUAL MEASURING DEVICE (23-9921-1) --- DISCONTINUED. (Verified 05/93) RETAINED IN DATABASE FOR REFERENCE. --- Braille and tactile plastic rule. 14 inch ruler has sliding 1 inch attachment with 8 separate fingers. User can divide the inch into any combination of eighths or into increments of sixty-fourths using the plastic shims (feeler gauge). Has raised numbers on one edge and braille numbers on the other. Useful for teaching fractions and decimals. Also available in metric....[More Information]
    
    
12. TELESCOPIC CLICK RULE -- Discontinued. Verified 8/2012. Retained in database for reference. -- The Telescopic Click Rule is an audible tactile rule designed for individuals who are blind or have low vision. It is an anodized aluminum rule which clicks at each one sixteenth of an inch and has raised graduations at each one half inch. The depth measurements up to 6 inches and outside measurements up to 12 inches can be taken accurately to one sixteenth of an inch. The outer end of the slide is threaded to receive two 1...[More Information]
    
    
13. TELESCOPIC CLICK RULE --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Audible tactile rule. Telescopic click rule made of aluminum and brass. Clicks at each 1/16 of an inch; has raised gradations for each 1/ 2 inch up to one foot. End of the slide is threaded to receive two one foot extension rods which are included for use as a 2 or 3 foot rule....[More Information]
    
    

Page 1 of 1