Products are listed alphabetically.

Page 1 of 1

1. ALUMINUM AND PLASTIC BRAILLE SLATE -- Discontinued. Verified 8/2012. Retained in database for reference. -- Aluminum Braille Slates are designed for brailling for individuals who are blind or those who work with the visually disabled. There are four different sizes and each comes with a wood stylus and have slots for dymo tape use. The sizes are: 27 cell/4 line; 18 cell/4 line jumbo; 19 cell/6 line; and 25 cell/single line. The plastic slate is light weight with 27 cell/4 line, but has no dymo slots....[More Information]
   
   
2. BRAILLE DESK SLATE (MODELS 1-00030-00 & 1-00060-00) --- DISCONTINUED. (Verified 08/2012) RETAINED IN DATABASE FOR REFERENCE. --- The Desk Slates and Styluses, models 1-00030-00 and 1-00060-00, are designed for Braille writing for individuals who are visually impaired. These slates provide a stiff, flat writing surface. The boards are made of wood and the slates are made of metal. A hinged clamp at the top of the board holds the paper in position. Small round pegs are mounted on the back of the slate and fit into the grooves on both sides of the b...[More Information]
   
   
3. CORRECTING SLATE (MODELS 1-00130-00 & 1-00190-00) --- DISCONTINUED. (Verified 08/2012) RETAINED IN DATABASE FOR REFERENCE. --- Braille Correcting Slates, models 1-00130-00 and 1-00190-00, are designed for correcting braille by allowing for the addition of missing dots. The slates are made of heavyweight metal and have 38 cells per line. Two versions are available: one has pins on the corners to prevent the paper from slipping (no. 1-00190-00); the other does not have pins (no. 1-00130-00). Both versions come with one standard large handle stylu...[More Information]
   
   
4. INTERPOINT POCKET SLATE KIT (MODEL 1-00081-00) & INTERPOINT POCKET SLATE (MODEL 1-00081-01) --- DISCONTINUED. (Verified 08/2012) RETAINED IN DATABASE FOR REFERENCE. --- The Interpoint Pocket Slate is a Braille slate designed to allow braille paper to be embossed on both sides for use by individuals who are blind or have low vision. The hinged plates of the slate are enclosed on a piece of paper with pins holding the paper in place. Two registration holes, which can be punched with a stylus, are located in the upper corners of the slate. After embossing one side, the page is turned over...[More Information]
   
   
5. POCKET BRAILLE SLATE KIT (MODEL B90950) --- DISCONTINUED (verified 12/95) RETAINED IN DATABASE FOR REFERENCE. --- The Braille Slate Kit, Model B90950 includes a 6-line slate, pencil-type stylus and braille notepaper. The handy carrying case holds slate, stylus and extra paper. The kit fits easily in pocket or purse. DIMENSIONS: 3.5 X 6.5 inches....[More Information]
   
   

Page 1 of 1