Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu
Skip to Quick Links

Flashing Light Signal

Products are listed alphabetically.

« Previous page    Page 2 of 2

  1. PCI SENTRY. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- The PCI Sentry is a computerized visual alert system, includes the central receiver and six transmitters to be purchased separately for telephone, nursery, front or rear door, smoke alarm security alert, and wake up alarm. Central receiver placed in room where people spend most time, transmitters where needed. When triggered lamps will flash precoded on, off signal in those rooms and at the central receiver. Portable remote flashers avail...[More Information]

  2. PORTABLE SOUND SIGNALER (MODEL 711) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Compact unit designed for easy transfer from room to room or to take traveling. Provides signal for telephone, room service and fire alarms. Plugs into electrical outlet near sound to be monitored. Lamp or bed vibrator plugs into unit and adjusts to desired level using sensitivity dial. Light indicates when unit is on. Weight 6 pounds. 3 by 5 by 4 inches....[More Information]

  3. ROTATING BEACON (MODEL H-117) --- DISCONTINUED. (Verified 05/93) RETAINED IN DATABASE FOR REFERENCE. --- Flashing light signal. Red rotating beacon similar to those used on emergency vehicles has bright Krypton bulb. Can be used with any Heidico detector, signaler, alarm clock, or other compatible devices....[More Information]

  4. SOUND DETECTOR (MODEL H-1050) --- DISCONTINUED. (Verified 05/93) RETAINED IN DATABASE FOR REFERENCE. --- Flashing light signal. Adjustable sound detector. Light plugged into device flashes if sound level increases above preset level. Reacts to voices, alarms, doorbells, etc....[More Information]

  5. SOUND SIGNALER (MODEL 716) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Sound sensor, flashes a light when built in microphone detects a sound. Plugs into a 110 volt AC outlet near the sound source. Sensitivity may be adjusted to sense desired sound. Remote receiver is plugged into outlet in any room. Plug light up to 100 watts into receiver. System includes 3.5 by 2.5 by 2.5 inch white plastic signaler, 2.25 by 4 by 1. 75 inch white plastic receiver. Extra receivers may be purchased....[More Information]

  6. SUPER STROBE LIGHT (MODEL 642) --- DISCONTINUED. (Verified 03/2008) RETAINED IN DATABASE FOR REFERENCE. --- Strobe light emits bright, rapidly flashing light upon activation. Plugs into clock timer, or any visually alerting device with 110 volt AC outlet. Turn the speed control to the desired number of flashes per second. Measures 6 by 6 inches. Plastic case....[More Information]

  7. TWO WAY RECEIVER (MODEL RC301) --- DISCONTINUED. (Verified 12/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Two Way Receiver, Model RC301, is a unit you plug into any outlet in your home and is used as a visual signaling device for deaf and harding hearing persons. A lamp or visual alerting bulb is be plugged into the receiver. The receiver can switch the lamp on and off. Whether the lamp is on or off, it will flash when the transmitter is activated. The unit can be used as a telephone, doorbell, or baby signal....[More Information]

  8. VISUAL ALERTING BULB --- DISCONTINUED. (Verified 12/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Visual Alerting Bulb, Model VABULB, is a flashing light signal bulb designed to be used in place of a lamp to signal individuals who are deaf or hard of hearing. It can be used with clocks, receivers, and other signal devices. The unit consists of a bulb in socket and plug to plug in any home outlet....[More Information]

  9. WATCHMAN SIGNALER (MODEL 726) --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- Signal device activates a light or bed vibrator when a sound is detected. Plugs into 110 volt AC outlet, plug light or vibrator into unit. Adjust sensitivity level to detect sound. Adjust delay to control how long activating sound must continue before lamp will flash. Adjust flash rate dial to select a pulsed or constant alerting signal. Measures 6 by 3.5 by 1.75 inches in gray plastic case. Four foot cord. Options incl...[More Information]

« Previous page    Page 2 of 2

Return to current products
  • Home
  • Alternate Layout
  • My AbleData
  • Contact
  • Site Map
  • A-Z Index
  • Help
  • Privacy

    • AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
    Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
    by ICF Macro under Contract No. ED-04-CO-0018/0007.

    The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.