Products are listed alphabetically.

Page 1 of 1

1. AUXILIARY PHONE BELL (MODEL 349) --- DISCONTINUED. (Verified 03/2008) RETAINED IN DATABASE FOR REFERENCE. --- Auxiliary telephone bell, produces a traditional telephone ring at 88 decibels. Plugs into modular telephone jack or uses adapter to plug both bell and phone into the same jack. On-off switch. 4.5 by 2.75 by 1. 75 inches. 7 foot cord....[More Information]
   
   
2. BELL MAX --- DISCONTINUED. (Verified 05/2009) RETAINED IN DATABASE FOR REFERENCE. --- Bell Max is an auxiliary bell and signal amplifier that will alter the ring frequency, ring pattern, and volume of a standard telephone ring. There are four frequency selections, four ring pattern variations, and a volume control. This product is intended for use by people with a hearing loss as well as for identifying a specific phone in a noisy area or office where there are many phones....[More Information]
   
   
3. DELUXE VARI TONE RINGERS --- DISCONTINUED. (Verified 06/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Vari-Tone Ringers are signal amplifiers designed to alter a telephone's signal to a clear, distinct pitch to assist persons with hearing disabilities hear the phone. The deluxe models feature a standard 6-foot hard wired line cord and an integral modular jack for easy installation. There are three audio frequency ranges, each of which can be further tuned by turning an exposed knurled knob. The CPE Vari-Tone Ringers...[More Information]
   
   
4. FONE A LERT --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Signal synchronized to ringing of telephone, produces shrill intermittent sound. 4 1/2 by 3 3/4 by 2 inches. Installed by placing suction attachment on phone surface. On/ off switch, 40 feet of wire, batteries included....[More Information]
   
   
5. HIGH INTENSITY TELEPHONE RINGER (MODEL 347) --- DISCONTINUED. (Verified 03/2008) RETAINED IN DATABASE FOR REFERENCE. --- Loud telephone ringer emits 88 decibel ring. May be used in any room that has a telephone jack. Insert the 7 foot cord with its modular plug into any unused wall jack, or use the included adapter to plug both ringer and phone into one modular telephone wall jack. May be wall mounted or placed on a table. DIMENSIONS: 10 x 4 x 6 inches....[More Information]
   
   
6. INDOOR/OUTDOOR LOUD RING (MODEL H-113) --- DISCONTINUED. (Verified 05/93) RETAINED IN DATABASE FOR REFERENCE. --- Weather resistant, volume controlled, loud ringer for telephone. May be mounted on wall indoors or outdoors. Connects to any modular phone jack....[More Information]
   
   
7. MODULAR INDOOR LOUD PHONE BELL --- DISCONTINUED. (Verified 3/2001) RETAINED IN DATABASE FOR REFERENCE ---The Modular Indoor Loud Phone Bell is an auxiliary bell designed to be used as additional ringer in a remote location for individuals who are deaf or hard of hearing. The device acts as an extra loud phone ringer with an on/off switch. It plugs modularly into your home telephone modular jack, using a twin adapter....[More Information]
   
   
8. TELETALKER (MODELS TEL004 & TEL004CS) --- DISCONTINUED. (Verified 02/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Teletalker is a telephone amplifier system designed to assist users with mild to severe hearing disabilities. The unit has a special speech processing (Dynamic Signal Processing) circuitry that eliminates annoying line noise and overall feedback thus improving the clarity of the telephone signal. The adjustable amplifier on model TEL004 has adjustable gain from 10 decibel to 30 decibel. Model TEL004CS has either a f...[More Information]
   
   
9. TELHORN (MODEL 350) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Telephone signaler 105 decibels with a choice of horn or warble when telephone rings. 7 foot cord with modular clip is inserted into an unused telephone jack or the included adapter is used to plug both the horn and phone into one wall jack. Adjustable volume. Wall mounted or placed on a table. Measures 4 1/4 by 4 1/8 by 4 1/4 inches....[More Information]
   
   

Page 1 of 1