Products are listed alphabetically.

Page 1 of 1

1. APT-1 HI-LO ACTIVE PASSIVE TRAINER The APT-1 Hi-Lo Active Passive Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors or individuals with neurological or physical disabilities. The unit is mounted on an adjustable stand so it can be positioned for either arm or leg exercise. It can be positioned low near the floor for lower body exercises or raised up to table top height for upper body workouts. An assortment of accessories are available to enable users with a...[More Information]
   
   
2. APT-1 PORTABLE ACTIVE PASSIVE TRAINER The APT-1 Portable Active Passive Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. This portable standalone unit with an adjustable angle base can be used on a table top for upper body workouts, or on the floor for lower body exercise while the user is seated in a wheelchair or chair. An assortment of accessories are available to enable users with a variety of phy...[More Information]
   
   
3. APT-5 ACTIVE PASSIVE DIGITAL TRAINER The APT-5 Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. This portable, standalone unit with an adjustable angle base can be used on a table top for upper...[More Information]
   
   
4. APT-5 HI-LO ACTIVE PASSIVE DIGITAL TRAINER The APT-5 Hi-Lo Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. The unit is mounted on an adjustable stand so it can be positioned for either arm or leg ex...[More Information]
   
   
5. ARM/LEG ERGOMETER MODIFICATION -------- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted arm/leg ergometer for use by an individual with mobility disabilities and who uses a wheelchair. The article outlines a simple adaptation of an ergometer for use by those with lower extremity disabilities. The modification involves using PVC tubing to adapt an existing exercise ergometer. The first step to modify an existing arm/leg ergometer is to remove the seat. PVC tubing is purchased and then cut to construct one m...[More Information]
   
   
6. BIKE EXERCISER The Bike Exerciser is designed to provide a piece of fitness equipment that is both enjoyable and motivating for a child with learning disabilities who is overweight and does not exercise often. The operating mechanisms of the Bike Exerciser are two four-bar linkages with a crank rocker; one on the left side and one on the right. The four-bar linkage consists of three moving links, one fixed link, and four pin joints. The handles, peddles, and cranks are moving links, while the body frame is ...[More Information]
   
   
7. BODY-ALINE The Body-Aline is an exercise machine and posture training activity for people with posture problems due to neuromuscular disabilities or lumbar issues. It is designed to gently stretch and strengthen the back and trunk postural muscles. The Body-Aline consists of a bench on which the users sits. A vertical bar is mounted in the rear of the bench with arm bars extending forward on either side of the user. There is also a foam roller mounted on the vertical bar. The heights of the arm bar and the...[More Information]
   
   
8. BOUNCE BACK The Bounce Back is an exercise machine designed for use by individuals with mobility disabilities. This device consists of a frame with a sling-style seat with a back support strap that provides motion and exercise similar to that of a mini trampoline. The user can change the muscle groups exercised by changing the position of his or her hands during the seated bouncing exercised. This device can provide cardio- vascular and strengthening exercise. CAPACITY: 250 pounds....[More Information]
   
   
9. CHALLENGE CIRCUIT (MODEL CH7000) The Challenge Circuit, model CH7000, is a weight exercise machine designed for use by individuals with spinal cord injury. This multi-purpose weight-training machine is equipped with various stations that allow paraplegics or quadriplegics to get a complete and total workout. It is a space-efficient, single-stack unit that enables individuals with varied arm and hand strength to perform at a comfortable level with little or no assistance. Exercise stations include a lat pull station for lat pull...[More Information]
   
   
10. CONCEPT2 INDOOR ROWER (MODEL E) The Concept2 Indoor Rower, model E, is a rowing machine designed for use by individuals with mobility ot lower extremity disabilities or low vision. The height of the seat makes it easier to get on and off for individuals with limited flexibility or mobility of the knees or hips, or with difficulties maintaining balance. The rower comes with a PM4 performance monitor with five display options, including large print. A long monitor arm puts the performance display within reach. Other features inc...[More Information]
    
    
11. ERGYS 2 REHABILITATION SYSTEM (MODELS E2-1 & E2-19) The Ergys2 Rehabilitation System is an exercise machine designed for use by individuals with spinal cord injury (SCI) or neurological disabilities. This unit provides an intense workout for leg muscles. The user is strapped securely into a seat, and the feet are placed on pedals with foot protectors. Leg movement is controlled by five on-board computers. The exercise machine comes in systems for home use (model E2-1) or outpatient clinic use (model E2-19). The system for home use includes one se...[More Information]
    
    
12. EVO The eVO is a motor assisted stationary therapy bicycle exerciser that provides reciprocating full-body motion to people who have little or no voluntary movement abilities due to neurological or physical disabilities. The eVO's motor-assisted handlebars move the upper body while the foot pedals move the lower extremities simultaneously in an interlinked "cross-patterning" manner. The intelligent motor in the eVO can be used in a Continuous Passive Motion, moving the user when they are unable to d...[More Information]
    
    
13. EXERCISE UNIT (MODEL NK 45) The Exercise Unit, model NK 45, is an exercise machine designed for use in exercising the lower extremities. The unit is useful for resistive exercise programs for the knee, particularly the quadriceps and hamstring muscles. The unit consists of an electric welded steel frame with the top covered by naugahyde over foam padding. The chrome torque unit has an easy-to-read range of motion indicator, padded adjustable leg rest and stationary weight holder with securing cuff in addition to a pull pin...[More Information]
    
    
14. FLEXICISER ORIGINAL The Flexiciser Original is an exercise machine designed for use by individuals with mobility disabilities. This unit offers a natural walking/running stride, moving arms and legs simultaneously with no weight-bearing impact on joints. This exerciser features three modes: Active (self), passive (FlexiMotor), and resistive (muscle toning). The unit accommodates most individuals between 5 feet, 2 inches and 6 feet tall and most wheelchair types and there is no transfer required. ASSEMBLY: Minimal a...[More Information]
    
    
15. FLEXICISER PRO The Flexiciser Pro is an exercise machine designed for use by individuals with mobility disabilities or arthritis. This unit offers a natural walking/running stride, moving arms and legs simultaneously with no weight-bearing impact on joints. This exerciser features three modes: Active (self), passive (FlexiMotor), and resistive (muscle toning). Made of stainless steel for durability, this unit is designed for use in institutional settings, such as colleges, nursing homes, assisted living facili...[More Information]
    
    
16. FLEXICISER SPORT The Flexiciser Sport is an exercise machine designed for use by individuals with mobility disabilities. Available in models for adults under 5 feet, 2 inches tall and children, this unit adjusts for the growing child and offers a natural walking/running stride, moving arms and legs simultaneously with no weight-bearing impact on joints. This exerciser features three modes: Active (self), passive (FlexiMotor), and resistive (muscle toning). The unit accommodates most individuals and wheelchair ty...[More Information]
    
    
17. FLEXICISER TALL The Flexiciser Tall is an exercise machine designed for use by individuals with mobility disabilities who are six feet tall or taller. This unit offers a natural walking/running stride, moving arms and legs simultaneously with no weight-bearing impact on joints. This exerciser features three modes: Active (self), passive (FlexiMotor), and resistive (muscle toning). The unit accommodates most individuals and wheelchair types and there is no transfer required. ASSEMBLY: Minimal assembly required. ...[More Information]
    
    
18. KAYE WALK-IN-PLACE The Kaye Walk-In-Place is a lower extemity exercise machine designed for use by children from two to twelve years of age with lower extremity, walking, or neurological disabilities. This unit can be used for fitness and conditioning, as well as for development of ambulation and post-operative strengthening. The device requires the user to stand upright and to bear weight and uses the pattern of walking for exercise. Reciprocally-lonked footplates to assist weight shift onto the weight-bearing li...[More Information]
    
    
19. KEISER AIR250 PNEUMATIC EXERCISE MACHINE - ABDOMINAL The Keiser Air250 Pneumatic Exercise Machine - Abdominal is an air resistance exercise machine designed for use by frail older adults and individuals with physical disabilities. This machine has a fully adjustable seat with chest pads, and provides intense abdominal exercise without involving the hip flexors. Resistance is 0 to 310 pounds. DIMENSIONS (HxLxW): 50 x 38 x 38 inches. WEIGHT: 126 pounds....[More Information]
    
    
20. KEISER AIR250 PNEUMATIC EXERCISE MACHINE - ARM CURL The Keiser Air250 Pneumatic Exercise Machine - Arm Curl is an air resistance exercise machine and arm exerciser designed for use by frail older adults and individuals with physical disabilities. The machine allows for a curl grip that develops the biceps muscle while protecting the wrists and elbows. The grips also allow for the hammer curl position for a better forearm workout. The articulated movement arm compensates for different lengths. Extra padding in the high-load areas and a fully adjus...[More Information]
    
    
21. KEISER AIR250 PNEUMATIC EXERCISE MACHINE - LEG PRESS The Keiser Air250 Pneumatic Exercise Machine - Leg Press is a leg exerciser and pneumatic exercise machine designed for use by seniors and individuals with physical disabilities. This machine has a bilateral leg movement function. The fully adjustable seated position protects the lower back by keeping it stabilized, offering a better pre-stretch on the gluteus muscles, which allows them to be more active during the exercise. The resistance range is 0 to 1000 pounds. DIMENSIONS (HxLxW): 48 x 60 x...[More Information]
    
    
22. LMA DELUXE STEPPER WITH HANDLE (MODEL H4100) The LMA Deluxe Stepper with Handle, model H4100, is a leg exerciser designed for use by individuals with lower extremity or balance disabilities or arthritis. This compact stepper can be used for low impact aerobic exercise for the whole body. The unit has two plates on which the user stands during stepping exercise while grasping the handle. The machine has an adjustable tension pulley system with dual hydraulic cylinders that work independently. A built-in digital computer controls the speed b...[More Information]
    
    
23. LOKOMATNANO LokomatNano is a robotic gait training system designed for use by individuals with stroke, brain injury, cerebral palsy, spinal cord injury, or other mobility, neurological or walking disabilities. The system consists of a robotic gait orthosis that guides the user's legs on a treadmill according to a pre-programmed physiological gait pattern. The guidance can be individually adjusted to the user's abilities and can be reduced according to the user’s improvement. The Levi dynamic body weight sys...[More Information]
    
    
24. LUMBAR EXTENSION MACHINE, NECK EXTENSION MACHINE, ROTARY NECK MACHINE, & ROTARY TORSO MACHNINE Computerized exercise machines for disgnosis and treatment of back pain....[More Information]
    
    
25. MONARK REHAB TRAINER (MODEL 881E) The Monark 881E Rehab Trainer is an arm and leg ergometer designed for use in rehabilitation. This unit includes a control knob to adjust resistance, and a graduated scale to provide a readout in watts at a speed of 50 revolutions per minute. An electronic meter shows pedal RPM (revolutions per minute), total pedal revolutions, and time. Each pedal crank can be individually adjusted both horizontally and vertically to a measurable level. The unit has retractable casters and a retractable handle ...[More Information]
    
    
26. MONARK SPARR REHAB (MODELS 808 & 809) The Monark Sparr Rehab is a cycle exerciser designed for exercise or rehabilitation use by seniors or individuals with physical disabilities. The unit has a low frame for easier entry and smooth pedaling with light loads. Model 808 is without a free wheel; model 809 has a free wheel. The unit has a heavy, well-balanced flywheel; speedometer and odometer; adjustable seat height; adjustable handlebar with quick release; and transport wheels. Pedal resistance is variable by turning the lever contro...[More Information]
    
    
27. MOTOMED GRACILE The MOTOmed Gracile is an exercise machine and continuous passive motion device designed for use by children with lower extremity or neurological disabilities or spinal cord injury (SCI). This unit is similar to a stationary bike in that it features two pedals to which the user’s feet are attached. The MOTOmed gracile provides a workout for the leg muscles in three modes: passive training with a motor; active training assisted by a motor; and active training with no assistance and adjustable res...[More Information]
    
    
28. MOTOMED VIVA2 The MOTOmed viva2 is an exercise machine and continuous passive motion device designed for use by adults with lower extremity or neurological disabilities or spinal cord injury (SCI). This unit is similar to a stationary bike in that it features two pedals to which the user’s feet are attached. The MOTOmed viva2 provides a workout for the leg muscles in three modes: passive training with a motor; active training assisted by a motor; and active training with no assistance and adjustable resistanc...[More Information]
    
    
29. PRO FITTER & PRO FITTER PHYSIO KIT The Pro Fitter is a horizontal glider exercise device designed to increase cardiovascular endurance, improved muscle tone, and enhanced body awareness through improved balance and coordination. As part of a therapeutic or rehabilitation program, the Pro Fitter can aid in the re-development of strength and proprioception after hip, knee, and ankle injuries; improve core stability for back, shoulder, and neck injuries; and enhance motor skills, muscular strength, and endurance. This piece of equip...[More Information]
    
    
30. PRO1 UPPER BODY EXERCISER (MODELS PRO100-INT & PRO102-INT) The PRO1 Upper Body Exerciser, models PRO100-INT and PRO102-INT, is an exercise machine and arm exerciser designed for use in cardio- and cardiopulmonary rehabilitation, adaptive physical education programs, and wellness programs for seniors and people who use a wheelchair, including individuals with lower extremity or mobility disabilities or spinal cord injury. This versatile, highly adjustable upper body exerciser can be used seated or standing. It comes with a wheelchair platform and is ava...[More Information]
    
    
31. QUADRI FLEX II EXERCISER Exerciser for disabled people to improve muscle tone and circulation of the legs and allow for complete range of motion. Arms swing out for side transfer from wheelchair. Adjustable tension seat, full back, padded seat, two safety belts for waist and chest. Velcro straps on foot supports. Rowing motion is achieved through pushing and pulling upright handlebar. Removable seat folds for storage. Portable, lightweight. DIMENSIONS: 62 x 20 x 36 inches, 21 inch seat height. WEIGHT: 45 pounds....[More Information]
    
    
32. QUADRICISER MOTORIZED THERAPY SYSTEM The Quadriciser Motorized Therapy System is a passive/isometric exercise machine designed for use by individuals with spinal cord injury or severe physical disabilities. The Quadriciser Motorized Therapy System is designed to exercise the upper and lower extremities, with timed sessions and variable speed control providing for a choice of duration and cardiovascular intensity. All four limbs are continuously moved in a coordinated, natural rhythm. The range of movement for each limb and the rate...[More Information]
    
    
33. REX RECUMBENT ELLIPTICAL The REX Recumbent Elliptical is an exercise machine designed for use in physical therapy or wellness programs. The unit is designed to be used by individuals of all ages and abilities while meeting the needs of seniors in senior centers, retirement communities, assisted living facilities, nursing homes, and long term care facilities. Its smooth, natural knee movement replicates climbing stairs to improve functional gait. The unit also provides knee-to-elbow core exercise. Exercise is bi-directio...[More Information]
    
    
34. RICKSHAW REHAB EXERCISER (MODEL 3000) The Rickshaw Rehab Exerciser, model 3000, is an exercise machine designed for use by individuals who use manual wheelchairs. This machine builds muscle strength by duplicating the arm and shoulder motions needed for wheelchair propulsion, transfer, and pressure relief. It enables users to strengthen specific arm and shoulder muscles by facing forward or backward while seated in the wheelchair, and pumping weighted oars. The machine can be customized for an individual program by using equal weigh...[More Information]
    
    
35. SEATED AEROBICS APPARATUS The Seated Aerobics Apparatus is an exercise machine designed for use by individuals with mobility disabilities. This device rests on the floor and features a sling to support the user to enable aerobic exercises in a seated position. This unit disassembles for transport and storage....[More Information]
    
    
36. STEADY STEPPER -------- PROTOTYPE --------- PURPOSE: To design a safe and effective weight-bearing home workout machine for an individual with cerebral palsy. The Steady Stepper utilizes a commercial portable stair-stepper attached to a custom railing system to aid in transitioning from a wheelchair to the stair-stepper, and to provide stability while stepping. Interchangeable wooden pegs mounted to the bottom of each step allow for a varying range of motion. Weight distribution over each step, and variable fo...[More Information]
    
    
37. SXT7000E2 TOTAL BODY ELLIPTICAL WITH EASY ENTRY The SXT7000e2 Total Body Elliptical With Easy Entry is an exercise machine and arm and leg exerciser designed for use by seniors, people and others who need easier entry and support. This whole body cross trainer provides a natural total body movement that creates a true-to-life walking cadence. Orthopedic Bio-Flex footbeds improve circulation and eliminate hot spots and numbness. Pedal movement simulates uneven surface to recruit stabilizing muscles. Torso rotation and core muscle recruitment ...[More Information]
    
    
38. THERACYCLE 200 The Theracycle 200 is a powered bicycle exerciser designed for use by individuals with lower extremity or neurological disabilities. This semi-recumbent bicycle exerciser helps provide full-body assisted range of motion exercise. The Theracycle 200 features an extra-large cushioned seat and seat back and adjustable handle bars that move forward and back as the foot pedals are moved. It has a steel frame, wide legs and lower center of gravity to promote safety and stability. The Theracycle 200 ha...[More Information]
    
    
39. THERACYCLE PRO The Theracycle PRO is a powered bicycle exerciser designed for use by individuals with lower extremity or neurological disabilities. This semi-recumbent bicycle exerciser provides power- assisted range of motion exercise for legs, arms and torso. It has a steel frame, wide legs and low center of gravity that promote safety and stability. The Theracyle PRO has a large seat that swivels for easy access and egress; pedals with adjustable straps that securely hold the feet on the pedal; adjustable h...[More Information]
    
    
40. THERAPYCYCLE The TherapyCyclePC is an arm or leg exerciser designed for use by individuals with upper or lower extremity disabilities, stroke,or cardiac disabilities. The cycle-style unit can be placed on a table for seated or standing upper extremity use or on the floor for lower extremity exercise and uses magnetic resistance for smooth pedal motion. The cycle includes a set of standard and Velcro pedals. The unit features a digital display, variable resistance, hand/foot loops on the pedals, and tracking ...[More Information]
    
    
41. THERAPYCYCLEPC The TherapyCyclePC is an arm or leg exerciser designed for use by individuals with upper or lower extremity disabilities, stroke,or cardiac disabilities. The cycle-style unit can be placed on a table for seated or standing upper extremity use or on the floor for lower extremity exercise. The unit features a digital display, hand/foot loops on the pedals, and tracking log software to enable user progress to be tracked. The unit tracks time, average and maximum speed, distance traveled, and calor...[More Information]
    
    
42. THERAPYTRAINER The TherapyTrainer is an arm or leg exerciser designed for use by individuals with upper or lower extremity disabilities, stroke,or cardiac disabilities. The cycle-style unit can be placed on a table for seated or standing upper extremity use or on the floor for lower extremity exercise. The unit uses magnetic resistance for smooth pedal motion and includes a set of standard and Velcro pedals. The unit features a digital display, variable resistance, hand/foot loops on the pedals, and tracking l...[More Information]
    
    
43. TRACK, THE The Track is a wall-mounted pulley exercise system designed for use by individuals with mobility disabilities, or spinal cord injury. Designed to increase strength by utilizing adjustable color-coded iron weights, the unit features one 25-pound color-coded stack in 5-pound increments. The system also includes two single hand grips and a Velcro strap for individuals with limited finger dexterity and for lower extremity exercises. OPTIONS: Cervical cap with 1-, 2-, or 3-pound weights....[More Information]
    
    
44. UNIVERSAL EXERCISE BED (MODEL A) The Universal Exercise Bed (Model A) is an exercise machine intended for use by people with arthritis or balance or neuromuscular disabilities that prevent them from standing or sitting while exercising. This product features a full size bed with a specially fitted mattress and a metallic frame. At the head of the bed is an arm, chest and shoulders bar with a 120-pound weight stack for upper body strength conditioning. Foot bars are located at the foot of the bed for sit-ups and other abdomina...[More Information]
    
    
45. UNIVERSAL EXERCISE BED (MODEL B) The Universal Exercise Bed (Model B) is an exercise machine intended for use by people with arthritis or balance or neuromuscular disabilities that prevent them from standing or sitting while exercising. This product features a full size bed with a specially fitted fixed, 6-piece mattress and a metallic frame. At the head of the bed is an arm, chest and shoulders bar with a 120-pound weight stack for upper body strength conditioning. The sides of the upper half of the bed fold down to allow fo...[More Information]
    
    
46. VERSACLIMBER (CLINICAL MODEL, CL-108C) VersaClimber is a step-pedal-climb exercise machine for non-weight bearing sit down or stand up exercise for arms only, legs only, or arms and legs. It was designed for and is in use by various levels of paraplegics; leg injured individuals; brain, spinal cord injury, and stroke individuals; individuals needing cardiac rehabilitation; and persons with acute/chronic back injury/pain. The original VersaClimber is a zero impact, hydraulically resisted, vertical climbing machine that provides total ...[More Information]
    
    
47. WHEELCHAIR GYM The Wheelchair Gym is a progressive resistive arm exerciser designed to provide upper extremity exercise for people with mobility disabilities who use a wheelchair. Wheelchair users may access this exercise machine since a wheelchair fits within the U-shaped base, which has a rubber mat to help the wheelchair stay in place. The user grips the upper end of two arms extending from the base, moves them up and forward. The circular grips at the top of the arms can be rotated to four positions to fit...[More Information]
    
    
48. WISB HANDBIKE -------- PROTOTYPE --------- PURPOSE: To design a prototype of a sports bike for individuals with lower extremity or mobility disabilities, spinal cord injury and lower limb amputation. The Walking Impairment Sport Bike (WISB) is a hand-propelled bike that combines the advantages of bike and recumbent bikes into a device that is one part agile wheelchair and one part sports bike. The WISB gives users the option to toggle between “high mode” for indoor use and comfortable city driving or “low mod...[More Information]
    
    

Page 1 of 1