Products are listed alphabetically.

Page 1 of 4    Next page »

1. ABLEWARE EXER-TWIST The ABLEWARE Exer-Twist is an arm exerciser designed for use by individuals with upper extremity disabilities. This device equally and simultaneously exercises the left and right side muscles of the forearms, arms, shoulders, and chest, helping to increase wrist and joint circulation and agility. To use, the user simply twists the device with the same motion that would be used to wring out a wet towell. OPTIONS: Snap on grips are available for those with larger hands or those who are unable to c...[More Information]
   
   
2. ADJUSTICIZER EXERCISE SYSTEM The Adjusticizer Exercise System, model A9300, is an arm and leg exerciser designed for use in physical therapy. This adjustable, portable system allows the user to exercise the back, chest, shoulders, biceps, triceps, forearms, and legs. It consists of interchangeable components that can be configured to fit the user and the specific exercise. The system includes one single strength cord, two composite cord adjusters, two handles, two foot/door attachment straps, three spring links, and a 64-pa...[More Information]
   
   
3. APT-1 HI-LO ACTIVE PASSIVE TRAINER The APT-1 Hi-Lo Active Passive Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors or individuals with neurological or physical disabilities. The unit is mounted on an adjustable stand so it can be positioned for either arm or leg exercise. It can be positioned low near the floor for lower body exercises or raised up to table top height for upper body workouts. An assortment of accessories are available to enable users with a...[More Information]
   
   
4. APT-1 PORTABLE ACTIVE PASSIVE TRAINER The APT-1 Portable Active Passive Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. This portable standalone unit with an adjustable angle base can be used on a table top for upper body workouts, or on the floor for lower body exercise while the user is seated in a wheelchair or chair. An assortment of accessories are available to enable users with a variety of phy...[More Information]
   
   
5. APT-5 ACTIVE PASSIVE DIGITAL TRAINER The APT-5 Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. This portable, standalone unit with an adjustable angle base can be used on a table top for upper...[More Information]
   
   
6. APT-5 HI-LO ACTIVE PASSIVE DIGITAL TRAINER The APT-5 Hi-Lo Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. The unit is mounted on an adjustable stand so it can be positioned for either arm or leg ex...[More Information]
   
   
7. ARMASSIST -------- PROTOTYPE --------- PURPOSE: To create a prototype of a portable robotic device with matching video game software platform for telerehabilitation for individuals with neuromuscular disabilities such as stroke, cerebral palsy, muscular dystrophy, and various others. Researchers in Spain have created ArmAssist, a mobile-based device that connects to the user through an orthotic that then records and measures the movements of the shoulder and elbow. These arm movements are translated to mo...[More Information]
   
   
8. AXIAL RESISTANCE SHOULDER WHEEL (MODEL 600) The Axial Resistance Shoulder Wheel, model 600, is an arm exerciser for people with upper extremity disabilities. The chrome plated, wall mounted wheel is calibrated to monitor progress. It comes with a choice of grips for each exercise, and the height adjusts for standing or seated patients. Additional features include interchangeable attachments with holder/bracket. DIMENSIONS: 6 to 39 inches range of motion....[More Information]
   
   
9. CABLE CHEST PULL (MODELS CP10 & CP20) Cable chest pull exerciser. Metal cables are attached to handles on either side. 3 cable model gives medium pull, 5 cable model gives heavy pull....[More Information]
   
   
10. CAN DO Resistive exerciser. Metal bar with pedals, clamps on to chair. Pedaling motion offers resistance to upper or lower extremities. Resistance can be controlled by braking device. Adjusts to any arm or leg length....[More Information]
    
    
11. CAREPEUTIC BETAFLEX ROYAL ELECTRONIC SMART MINIEXERCISE BIKE The Carepeutic BetaFlex Royal Electronic Smart MiniExercise Bike is an arm or leg bicycle exerciser designed for use by individuals with upper extremity, lower extremity or mobility disabilities or arthritis. This cycle can be used on the floor or table, and it has four speeds for an adjustable workout and reverse pedaling. The unit also has a timer and display screen to track speed, distance, and calories. This unit features quiet operation and automatic shut-off. DIMENSIONS (HxLxW): 12 x 17 x ...[More Information]
    
    
12. CHALLENGE CIRCUIT (MODEL CH7000) The Challenge Circuit, model CH7000, is a weight exercise machine designed for use by individuals with spinal cord injury. This multi-purpose weight-training machine is equipped with various stations that allow paraplegics or quadriplegics to get a complete and total workout. It is a space-efficient, single-stack unit that enables individuals with varied arm and hand strength to perform at a comfortable level with little or no assistance. Exercise stations include a lat pull station for lat pull...[More Information]
    
    
13. CHATTANOOGA DELUXE RESISTIVE PEDAL EXERCISER The Chattanooga Group Deluxe Resistive Pedal Exerciser is a bicycle exerciser designed for use by individuals with upper or lower extremity disabilities. This lightweight, fully automatic exerciser features pedals with hand/foot loops; a multi-functional electronic monitor with LED display to track speed, distance, total mileage, total time used, and calories used; and quick dial variable resistance. WEIGHT: 16 pounds....[More Information]
    
    
14. CHATTANOOGA GROUP RESISTIVE PEDAL EXERCISER The Chattanooga Group Resistive Pedal Exerciser is a bicycle exerciser designed for use by individuals with upper or lower extremity disabilities. This lightweight manual exerciser can be used with the arms or legs and features pedals with hand/foot loops and a tension/resistance setting knob. WEIGHT: 5 pounds. COLOR: Chrome with black pedals and knob....[More Information]
    
    
15. COGNITOYS SET (MODEL 5152) The Cognitoys Set, model 5152, is an arm exerciser and an eye hand coordination exerciser designed to improve reach, range of motion, midline crossing, and upper extremity strength and endurance through graded repetitive exercise for children and adults with physical and cognitive disabilities. The set consists of a wooden base with four removable wooden dowels of varying heights and 16 brightly colored firm foam shapes (rectangles, squares, triangles, and circles) with holes through the center ...[More Information]
    
    
16. COLORADO SPORT CYCLE The Colorado Sport Cycle is a bicycle arm or leg exerciser designed for use by individuals with upper and/or lower extremity disabilities. This adjustable, stationary exercise cycle is placed on a table and used with hand grips for upper extremity exercise. The unit can also be placed on the floor and used with the optional foot pedals for lower extremity exercise. The unit provides a choice of forward or bi-directional resistance. Standard features include lever-controlled resistance adjustment...[More Information]
    
    
17. DELUXE BILATERAL PULLEY (MODELS R16264, R16281, & R16282) The Deluxe Bilateral Pulley System, models R16264, R16281, and R16282, is a pulley weight system for upper or lower extremity exercise. The system consists of 2 vertical pulley carrier units with weights, hand grips, and straps. The pulley carriers may be fixed at more than 20 levels 2 inches apart. The direction of pull and the length of rope may be altered for exercising virtually any muscle group. The resistance adjusts Bilaterally in 2 pound intervals. The height adjustment can be read from...[More Information]
    
    
18. DOOR PULLEY, THE (MODEL H70908) The Door Pulley, model H70908, is an overhead pulley exerciser designed for upper extremity exercises. The device is easy to set up and remove; it fits over the top edge of any door up to 1.75 inches thick. Rubber bumbers protect the door's surface. A 1.75-inch diameter, low friction plastic swivel and pulley, two hand stirrups with wood grips, and a high strength rope are included. The plated metal frame extends out 15 inches from the door. WEIGHT: Shipping weight is 3 pounds....[More Information]
    
    
19. EASYSTAND EVOLV ADULT GLIDER The EasyStand Evolv Adult Glider is a standing frame designed for use by individuals with balance, lower extremity, or neurological disabilities or cerebral palsy. This sit-to-stand hydraulic standing aid fits individuals from 5 feet to 6 feet 2 inches tall. The pivot points of the stander mimic the body's natural pivot points to maximize over-center stretch and minimize shear in the buttocks and back. Additional supports (hip supports, lateral supports, head support) remain in place from sittin...[More Information]
    
    
20. EASYSTAND EVOLV YOUTH GLIDER The EasyStand Evolv Youth Glider is a standing aid designed for use by individuals with balance, lower extremity, or neurological disabilities or cerebral palsy. This modular stander has a hydraulic lift mechanism and fits individuals from 4 foot to 5 foot 6 inches tall. The pivot points of the stander mimic the body's natural pivot points to provide a maximum over-center stretch for various body types while minimizing shear in the buttocks and back. Additional supports (hip supports, lateral su...[More Information]
    
    
21. ENDORPHIN DOUBLE WALL PULLEY (WALL MOUNT) (MODEL 306) The Endorphin Double Wall Pulley (Wall Mount), model 306, is a weight exercise machine designed for use by individuals with spinal cord injury or lower extremity, mobility, or upper extremity disabilities. This unit offers a total body workout from either a standing or seated position. The high and low pulley stacks are designed to increase upper and lower body strength. Made of tubular steel, the unit comes with two-single grip handles and two 75-pound (34 kilogram) pin-select weight stacks ...[More Information]
    
    
22. EVO The eVO is a motor assisted stationary therapy bicycle exerciser that provides reciprocating full-body motion to people who have little or no voluntary movement abilities due to neurological or physical disabilities. The eVO's motor-assisted handlebars move the upper body while the foot pedals move the lower extremities simultaneously in an interlinked "cross-patterning" manner. The intelligent motor in the eVO can be used in a Continuous Passive Motion, moving the user when they are unable to d...[More Information]
    
    
23. EX N' FLEX ARM AND LEG MACHINE (MODEL EF-300) The Ex 'N Flex Arm and Leg Machine, model EF-300, is a powered arm- or leg-propelled bicycle exerciser disigned for use by people with spinal cord injury or upper or lower extremity disabilities. This compact, lightweight cycle can be used on a tabletop or floor. The unit features an accessible control panel and cabled remote fot ease of operation, a bio feedback indicator, timer, forward and reverse directions. and three speed levels for passive or active training. Adjustable crank arm lengths ...[More Information]
    
    
24. EXER-TWIST EXERCISER (MODEL 70926) The Exer-Twist Exerciser, model 70926, is an arm and hand exerciser designed to exercise the muscles of the hand, wrist and arm, and isometrically, the chest and shoulders. The device is used by twisting the two ends that fit together, like wringing a towel. Resistance is adjustable for progressive exercise. Extra pairs of larger snap-on grips provide extra support to hand structures or accommodate limited hand closure. DIMENSIONS: 7.75 inches long x 1.5 inches in diameter. Extra grips are 2 inc...[More Information]
    
    
25. FEEL THE BEAT -------- PROTOTYPE --------- PURPOSE: To create a prototype a toy-like wearable elbow device to assist with physiotherapy for children with cerebral palsy. Physiotherapy can be challenging for adults but children present unique challenges requiring unique solutions. The “Feel the Beat” device adds a dash of freshness to the routine by using simple pneumatic air pump technology and music synchronization to become this interactive and toy-like wearable elbow device. With adjustable angles of use, ...[More Information]
    
    

Page 1 of 4    Next page »