Products are listed alphabetically.

Page 1 of 1

1. ABLEWARE EXER-TWIST The ABLEWARE Exer-Twist is an arm exerciser designed for use by individuals with upper extremity disabilities. This device equally and simultaneously exercises the left and right side muscles of the forearms, arms, shoulders, and chest, helping to increase wrist and joint circulation and agility. To use, the user simply twists the device with the same motion that would be used to wring out a wet towell. OPTIONS: Snap on grips are available for those with larger hands or those who are unable to c...[More Information]
   
   
2. ADJUSTICIZER EXERCISE SYSTEM The Adjusticizer Exercise System, model A9300, is an arm and leg exerciser designed for use in physical therapy. This adjustable, portable system allows the user to exercise the back, chest, shoulders, biceps, triceps, forearms, and legs. It consists of interchangeable components that can be configured to fit the user and the specific exercise. The system includes one single strength cord, two composite cord adjusters, two handles, two foot/door attachment straps, three spring links, and a 64-pa...[More Information]
   
   
3. APT-1 HI-LO ACTIVE PASSIVE TRAINER The APT-1 Hi-Lo Active Passive Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors or individuals with neurological or physical disabilities. The unit is mounted on an adjustable stand so it can be positioned for either arm or leg exercise. It can be positioned low near the floor for lower body exercises or raised up to table top height for upper body workouts. An assortment of accessories are available to enable users with a...[More Information]
   
   
4. APT-1 PORTABLE ACTIVE PASSIVE TRAINER The APT-1 Portable Active Passive Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. This portable standalone unit with an adjustable angle base can be used on a table top for upper body workouts, or on the floor for lower body exercise while the user is seated in a wheelchair or chair. An assortment of accessories are available to enable users with a variety of phy...[More Information]
   
   
5. APT-5 ACTIVE PASSIVE DIGITAL TRAINER The APT-5 Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. This portable, standalone unit with an adjustable angle base can be used on a table top for upper...[More Information]
   
   
6. APT-5 HI-LO ACTIVE PASSIVE DIGITAL TRAINER The APT-5 Hi-Lo Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. The unit is mounted on an adjustable stand so it can be positioned for either arm or leg ex...[More Information]
   
   
7. ARMASSIST -------- PROTOTYPE --------- PURPOSE: To create a prototype of a portable robotic device with matching video game software platform for telerehabilitation for individuals with neuromuscular disabilities such as stroke, cerebral palsy, muscular dystrophy, and various others. Researchers in Spain have created ArmAssist, a mobile-based device that connects to the user through an orthotic that then records and measures the movements of the shoulder and elbow. These arm movements are translated to mo...[More Information]
   
   
8. AXIAL RESISTANCE SHOULDER WHEEL (MODEL 600) The Axial Resistance Shoulder Wheel, model 600, is an arm exerciser for people with upper extremity disabilities. The chrome plated, wall mounted wheel is calibrated to monitor progress. It comes with a choice of grips for each exercise, and the height adjusts for standing or seated patients. Additional features include interchangeable attachments with holder/bracket. DIMENSIONS: 6 to 39 inches range of motion....[More Information]
   
   
9. CABLE CHEST PULL (MODELS CP10 & CP20) Cable chest pull exerciser. Metal cables are attached to handles on either side. 3 cable model gives medium pull, 5 cable model gives heavy pull....[More Information]
   
   
10. CAN DO Resistive exerciser. Metal bar with pedals, clamps on to chair. Pedaling motion offers resistance to upper or lower extremities. Resistance can be controlled by braking device. Adjusts to any arm or leg length....[More Information]
    
    
11. CAREPEUTIC BETAFLEX ROYAL ELECTRONIC SMART MINIEXERCISE BIKE The Carepeutic BetaFlex Royal Electronic Smart MiniExercise Bike is an arm or leg bicycle exerciser designed for use by individuals with upper extremity, lower extremity or mobility disabilities or arthritis. This cycle can be used on the floor or table, and it has four speeds for an adjustable workout and reverse pedaling. The unit also has a timer and display screen to track speed, distance, and calories. This unit features quiet operation and automatic shut-off. DIMENSIONS (HxLxW): 12 x 17 x ...[More Information]
    
    
12. CHALLENGE CIRCUIT (MODEL CH7000) The Challenge Circuit, model CH7000, is a weight exercise machine designed for use by individuals with spinal cord injury. This multi-purpose weight-training machine is equipped with various stations that allow paraplegics or quadriplegics to get a complete and total workout. It is a space-efficient, single-stack unit that enables individuals with varied arm and hand strength to perform at a comfortable level with little or no assistance. Exercise stations include a lat pull station for lat pull...[More Information]
    
    
13. CHATTANOOGA DELUXE RESISTIVE PEDAL EXERCISER The Chattanooga Group Deluxe Resistive Pedal Exerciser is a bicycle exerciser designed for use by individuals with upper or lower extremity disabilities. This lightweight, fully automatic exerciser features pedals with hand/foot loops; a multi-functional electronic monitor with LED display to track speed, distance, total mileage, total time used, and calories used; and quick dial variable resistance. WEIGHT: 16 pounds....[More Information]
    
    
14. CHATTANOOGA GROUP RESISTIVE PEDAL EXERCISER The Chattanooga Group Resistive Pedal Exerciser is a bicycle exerciser designed for use by individuals with upper or lower extremity disabilities. This lightweight manual exerciser can be used with the arms or legs and features pedals with hand/foot loops and a tension/resistance setting knob. WEIGHT: 5 pounds. COLOR: Chrome with black pedals and knob....[More Information]
    
    
15. COGNITOYS SET (MODEL 5152) The Cognitoys Set, model 5152, is an arm exerciser and an eye hand coordination exerciser designed to improve reach, range of motion, midline crossing, and upper extremity strength and endurance through graded repetitive exercise for children and adults with physical and cognitive disabilities. The set consists of a wooden base with four removable wooden dowels of varying heights and 16 brightly colored firm foam shapes (rectangles, squares, triangles, and circles) with holes through the center ...[More Information]
    
    
16. COLORADO SPORT CYCLE The Colorado Sport Cycle is a bicycle arm or leg exerciser designed for use by individuals with upper and/or lower extremity disabilities. This adjustable, stationary exercise cycle is placed on a table and used with hand grips for upper extremity exercise. The unit can also be placed on the floor and used with the optional foot pedals for lower extremity exercise. The unit provides a choice of forward or bi-directional resistance. Standard features include lever-controlled resistance adjustment...[More Information]
    
    
17. DELUXE BILATERAL PULLEY (MODELS R16264, R16281, & R16282) The Deluxe Bilateral Pulley System, models R16264, R16281, and R16282, is a pulley weight system for upper or lower extremity exercise. The system consists of 2 vertical pulley carrier units with weights, hand grips, and straps. The pulley carriers may be fixed at more than 20 levels 2 inches apart. The direction of pull and the length of rope may be altered for exercising virtually any muscle group. The resistance adjusts Bilaterally in 2 pound intervals. The height adjustment can be read from...[More Information]
    
    
18. DOOR PULLEY, THE (MODEL H70908) The Door Pulley, model H70908, is an overhead pulley exerciser designed for upper extremity exercises. The device is easy to set up and remove; it fits over the top edge of any door up to 1.75 inches thick. Rubber bumbers protect the door's surface. A 1.75-inch diameter, low friction plastic swivel and pulley, two hand stirrups with wood grips, and a high strength rope are included. The plated metal frame extends out 15 inches from the door. WEIGHT: Shipping weight is 3 pounds....[More Information]
    
    
19. EASYSTAND EVOLV ADULT GLIDER The EasyStand Evolv Adult Glider is a standing frame designed for use by individuals with balance, lower extremity, or neurological disabilities or cerebral palsy. This sit-to-stand hydraulic standing aid fits individuals from 5 feet to 6 feet 2 inches tall. The pivot points of the stander mimic the body's natural pivot points to maximize over-center stretch and minimize shear in the buttocks and back. Additional supports (hip supports, lateral supports, head support) remain in place from sittin...[More Information]
    
    
20. EASYSTAND EVOLV YOUTH GLIDER The EasyStand Evolv Youth Glider is a standing aid designed for use by individuals with balance, lower extremity, or neurological disabilities or cerebral palsy. This modular stander has a hydraulic lift mechanism and fits individuals from 4 foot to 5 foot 6 inches tall. The pivot points of the stander mimic the body's natural pivot points to provide a maximum over-center stretch for various body types while minimizing shear in the buttocks and back. Additional supports (hip supports, lateral su...[More Information]
    
    
21. ENDORPHIN DOUBLE WALL PULLEY (WALL MOUNT) (MODEL 306) The Endorphin Double Wall Pulley (Wall Mount), model 306, is a weight exercise machine designed for use by individuals with spinal cord injury or lower extremity, mobility, or upper extremity disabilities. This unit offers a total body workout from either a standing or seated position. The high and low pulley stacks are designed to increase upper and lower body strength. Made of tubular steel, the unit comes with two-single grip handles and two 75-pound (34 kilogram) pin-select weight stacks ...[More Information]
    
    
22. EVO The eVO is a motor assisted stationary therapy bicycle exerciser that provides reciprocating full-body motion to people who have little or no voluntary movement abilities due to neurological or physical disabilities. The eVO's motor-assisted handlebars move the upper body while the foot pedals move the lower extremities simultaneously in an interlinked "cross-patterning" manner. The intelligent motor in the eVO can be used in a Continuous Passive Motion, moving the user when they are unable to d...[More Information]
    
    
23. EX N' FLEX ARM AND LEG MACHINE (MODEL EF-300) The Ex 'N Flex Arm and Leg Machine, model EF-300, is a powered arm- or leg-propelled bicycle exerciser disigned for use by people with spinal cord injury or upper or lower extremity disabilities. This compact, lightweight cycle can be used on a tabletop or floor. The unit features an accessible control panel and cabled remote fot ease of operation, a bio feedback indicator, timer, forward and reverse directions. and three speed levels for passive or active training. Adjustable crank arm lengths ...[More Information]
    
    
24. EXER-TWIST EXERCISER (MODEL 70926) The Exer-Twist Exerciser, model 70926, is an arm and hand exerciser designed to exercise the muscles of the hand, wrist and arm, and isometrically, the chest and shoulders. The device is used by twisting the two ends that fit together, like wringing a towel. Resistance is adjustable for progressive exercise. Extra pairs of larger snap-on grips provide extra support to hand structures or accommodate limited hand closure. DIMENSIONS: 7.75 inches long x 1.5 inches in diameter. Extra grips are 2 inc...[More Information]
    
    
25. FEEL THE BEAT -------- PROTOTYPE --------- PURPOSE: To create a prototype a toy-like wearable elbow device to assist with physiotherapy for children with cerebral palsy. Physiotherapy can be challenging for adults but children present unique challenges requiring unique solutions. The “Feel the Beat” device adds a dash of freshness to the routine by using simple pneumatic air pump technology and music synchronization to become this interactive and toy-like wearable elbow device. With adjustable angles of use, ...[More Information]
    
    
26. FITTER PHYSIO TONER SHOULDER KIT The Fitter Physio Toner is a shoulder and arm exerciser kit designed to be used in a clinical setting or at home for the rehabilitation of individuals with shoulder injuries or individuals wanting to strengthen their shoulders. The exerciser works the shoulders and arms by means of a simple pulley system. The device can be set up using a door frame, and may be used standing or sitting. COMPONENTS: The shoulder kit includes a shoulder pulley for range of motion, a Physio Toner cord for strengthen...[More Information]
    
    
27. FLEX BAR, RED, 10 LB. RESISTANCE (MODEL 15E070A) The Flex Bar, Red, 10 Pound Resistance is a hand exerciser designed for use by individuals with grasping or other upper extremity disabilities. The flex bar is a system of progressive resistance exerciser designed for strengthening wrists, shoulders, grip strength, and improving elbow mobility. This exerciser is lightweight and portable. ...[More Information]
    
    
28. FRICTION ENERGY SYSTEM. Exercise equipment consists of 7 by 19 inch cabinet which contains a sliding exercise apparatus for push-pull action, two wrist or ankle weights, two stretch cords, and a manual. A "Sawyer System" which utilizes a 12 inch miter saw and miter box for similar push-pull action is also available. ....[More Information]
    
    
29. Floor Bars. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Frame with bars designed so a child can do press-ups from a sitting position for arm development. Device consisting of a plywood board 18 by 22 inches, corner blocks, brackets and uprights, and two round bars 1 inch in diameter and 22 inches long. Can be made so the height of the bars is adjustable. Includes drawings. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir P...[More Information]
    
    
30. GLITTER ROLL (MODELS 160H, 1698H, & 1695H) The Glitter Roll is an adapted music box designed to provide multi-sensory stimulation for children with physical, cognitive and/or sensory disabilities. The clear cylindrical roller contains a potpourri of sparkling shapes which, when rotated, activates the music box. These cylinders have rolling pin style handles to encourage bilateral hand use and aid in strengthening the upper extremities. Model 160H also plays music, model 1698H offers music and lights, and model 1695H has lights and vibrat...[More Information]
    
    
31. GOING (MODELS 3800 & 3801) The Going, models 3800 and 3801, is an activty designed develop eye hand coordination and challenge motor planning skills for individuals with a physical disability. It is basically a football shaped object (the going) attached to two strings. On the end of the strings are handles with special protestors. The clients move the going back and forth by pulling the strings apart from one another. SIZES: Medium and large. DIMENSIONS: Length of string from one set of handles to the other set is 14 fee...[More Information]
    
    
32. GYM-RING Gym-Rings are tubular, plastic rings designed for gross motor activities such as ring toss or exercises for the hands, fingers, and arms. The rings may be combined with Theraband (see separate entry) or used to keep balles stable and in place. DIMENSIONS: 7 inches in diameter. COLOR: Red, yellow, blue, and green....[More Information]
    
    
33. HEARTFLEX HeartFlex is an arm and hand exerciser designed for use by children and adults with mobility or lower extremity disabilities or spinal cord injury. Designed to improve grip, forearm, and upper body strength, this device specifically produces strong dense muscle tissue while increasing flexibility. It uses nineteen connected ball and socket joints that provide consistent resistance over a complete range of motion. HeartFlex has one set resistance level and this is calibrated to be similar to the ...[More Information]
    
    
34. HYDRO-BELLS Hydro-Bells are swimming pool exercise equipment designed for use in aquatic therapy. They are made of high-impact, ultra-violet- and chlorine-resistant polypropylene, and provide three dimensional hydrodynamic resistance for aquatic exercise of the upper extremities. Hydro-Bells are available alone or in sets with additional equipment. Hydro-Bell System 1 includes one pair of Hydro-Bells, one upper body workout video, and an upper body instruction chart. Total Fitness System 3 comes with one p...[More Information]
    
    
35. KEISER AIR250 PNEUMATIC EXERCISE MACHINE - ARM CURL The Keiser Air250 Pneumatic Exercise Machine - Arm Curl is an air resistance exercise machine and arm exerciser designed for use by frail older adults and individuals with physical disabilities. The machine allows for a curl grip that develops the biceps muscle while protecting the wrists and elbows. The grips also allow for the hammer curl position for a better forearm workout. The articulated movement arm compensates for different lengths. Extra padding in the high-load areas and a fully adjus...[More Information]
    
    
36. KEISER AIR250 PNEUMATIC EXERCISE MACHINE - LAT PULL DOWN The Keiser Air250 Pneumatic Exercise Machine - Lat Pull Down is an arm and upper body exerciser designed for use by seniors and individuals with physical disabilities. The open handlebar design offers a range of motion adjustments to accommodate various body sizes and flexibilities. The resistance range is 0 to 250 pounds. It uses mechanical linkage to provide the proper linear pull, reducing the chance of injury to the user. DIMENSIONS (HxLxW): 73 x 60 x 45 inches. WEIGHT: 176 pounds....[More Information]
    
    
37. LIFELINE WALL PULLEY SYSTEM & PORTABLE LIFELINE GYM The Lifeline Wall Pulley System is an overhead pully arm exerciser designed to provide therapuetic or body-building exercises based on the principle of variable resistance in home or clinical settings for able-bodied individuals, wheelchair users, and others in physical rehabilitation. This wall-mounted system includes three 28 7/8-inch channels which are mounted to a stud (lag bolts included). A 10-inch overhang unit is mounted to the top of the channel to allow for clearance from the wall for ...[More Information]
    
    
38. LIMBER LADDER (MODEL 8670) The Limber Ladder, ##8670, is a shoulder ladder and arm exerciser for back and shoulder stretches. The ladder is made of polypropylene rope with high strength chlorine resistant, tubular plastic rungs. The ladder can be used for water workouts in the pool (the ladder will float if dropped), or for warm up exercise routines to increase flexibility. The 2 ladder sections can be interlocked for additional exercise applications. DIMENSIONS: Each section is 26 inches long. COLOR: Yellow and tan....[More Information]
    
    
39. METALIUS GRIP SAVER PLUS The Metolius Grip Saver Plus is an arm, hand, and finger exerciser designed for use by individuals with finger, wrist, and elbow injuries or disabilities. This exerciser is designed to strengthen and balance the muscles of the hand, wrist, and forearm for rehabilitation and prevention of finger, wrist, and elbow injuries. The exerciser allows the hand to move through a full, natural range of motion, using both the flexion (closing) motion and the extension (opening) motion. The set includes two ...[More Information]
    
    
40. MIDLAND DELUXE CALIBRATED SHOULDER WHEEL (MODEL 2286B) The Midland Deluxe Calibrated Shoulder Wheel, model 2286B, is an arm exerciser designed for use by individuals with upper extremity disabilities. The device consists of a wheel attached to an all-steel base for wall mounting. The 360 degree scale at the center of the wheel enables degree of revolution to be read from either turning direction. One knob provides easy-to-operate resistance control and instant height adjustment. DIMENSION: Wheel diameter adjusts from 30 to 38 inches, and the wall mo...[More Information]
    
    
41. MINI FOAM SPEED BALL The Mini Foam Speed Ball is an arm exerciser designed for use by individuals with upper extremity disabilities. This bilateral activity requires two players to hold the plastic handles and send the ball back and forth, opening and closing their arms until the ball reaches them....[More Information]
    
    
42. MTL2470 SHOULDER CPM The MTL2470 Shoulder CPM is a continuous passive motion device and shoulder exerciser designed for use in physical therapy. This unit provides passive range of motion to the shoulder in either hospital or home environment, including post-operative passive range of motion to prevent stiffness by reducing edema and muscle contracture. It can be used on either the left or right shoulder, with 180 degrees of flexion, 20 degrees of extension, internal/external rotation from 0 to 110 degrees, and syn...[More Information]
    
    
43. NUSTEP T4 (MODEL TRS4000) The NuStep T4, model TRS4000, is a bicycle arm and leg exerciser designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury or arthritis. Designed to combine a comfortable seated position with a smooth stepping motion, this exerciser provides simultaneous upper and lower body motion to work all the major muscle groups. Its ergonomic design is intended to minimize joint stress and low back pain, and it has variable step length options (user selected step l...[More Information]
    
    
44. PEDAL EXERCISER The Pedal Exerciser is an arm and leg exerciser designed for use by individuals with upper or lower extremity disabilities and can be used on a table top or placed on the floor. Hook-and-loop straps hold feet firmly to the pedals. A tension control knob allows a broad range of pedal resistance for a progressive exercise program. DIMENSIONS (HxDxW): 13.5 x 21 x 16 inches at the highest position....[More Information]
    
    
45. PEDLAR 1ST STEP The Pedlar 1st Step is an arm and leg exerciser designed for use by individuals with upper or lower extremity disabilities. This variable resistance pedal exerciser strengthens muscles while providing a cardiovascular workout, and it can be used with either arms or legs. It has a steel frame and non-skid tips on all four feet. Features include hand/foot loops and a resistance adjustment knob. DIMENSIONS (HxLxW): 9 x 15.75 x 20 inches. CAPACITY: 250 pounds. WEIGHT: 6 pounds. WARRANTY: 1-year warr...[More Information]
    
    
46. PEDLAR LIGHT WORKOUT EXERCISER The Pedlar Light Workout Exerciser is an arm and leg exerciser designed for use by individuals with upper or lower extremity disabilities. This variable resistance pedal exerciser strengthens muscles while providing a cardiovascular workout, and can be used with either arms or legs. It has a steel frame and non-skid tips on all four feet. The Pedlar Light has a resistance adjustment knob, and it features the Fits-Rite pedal that has a Velcro strap for a snug, secure fit. DIMENSIONS (HxLxW): 8 x ...[More Information]
    
    
47. PEDLAR PRO The Pedlar Pro is an arm and leg exerciser designed for use by individuals with upper or lower extremity disabilities. This variable resistance pedal exerciser strengthens muscles while providing a cardiovascular workout, and can be used with either arms or legs. The height of the pedals can be adjusted, and it has a steel frame and non-skid tips on all four feet. The Pedlar Pro has a resistance adjustment knob, and it features the Fits-Rite pedal that has a Velcro strap for a snug, secure fit f...[More Information]
    
    
48. PRIMUS RS PrimusRS is an assessment and evaluation system and arm and leg exerciser designed for use in physical therapy of individuals with upper or lower extremity disabilities. It provides multi-joint testing, orthopedic rehab, neuromuscular reeducation, and musculoskeletal training of the upper & lower extremities and the core. The system can be used to Evaluate, rehabilitate, and track progress with Isotonic, Isometric, Isokinetic, & CPM resistance modes. It supports evidence-based physiotherapy, phy...[More Information]
    
    
49. PRO1 UPPER BODY EXERCISER (MODELS PRO100-INT & PRO102-INT) The PRO1 Upper Body Exerciser, models PRO100-INT and PRO102-INT, is an exercise machine and arm exerciser designed for use in cardio- and cardiopulmonary rehabilitation, adaptive physical education programs, and wellness programs for seniors and people who use a wheelchair, including individuals with lower extremity or mobility disabilities or spinal cord injury. This versatile, highly adjustable upper body exerciser can be used seated or standing. It comes with a wheelchair platform and is ava...[More Information]
    
    
50. PRO1000 UPPER BODY EXERCISER (MODEL PRO1031-INT) The PRO1000 Upper Body Exerciser, model PRO1031-INT, is a progressive resistance arm exerciser designed for use by seniors or people who use a wheelchair, including individuals with lower extremity or mobility disabilities or spinal cord injury. It can be used in active aging facilities, adaptive physical education programs, and cardio- and cardiopulmonary rehabilitation. This unit has an adjustable, bi-directional arm cranks for use in isokinetic resistance training . It has low starting resis...[More Information]
    
    
51. RESISTANCE EXERCISERS Grip exercisers for hands, fingers and arms. for the hand the fixed resistance grip single spring exerciser, medium, heavy and extra heavy. Variable resistance grip, a six spring grip. Foam and digital grips. Theraband latex exercise band is a roll of latex which can be cut and tied to the length desired, five color coded resistances. Chest Pull exercisers in three models, the Cable Chest Pull, the Gum Rubber Chest Pull, and the Hydraulic Exerciser....[More Information]
    
    
52. RESISTANCE GYM 200 The Resistance Gym 200 is an arm exerciser designed for use by people with balance, lower extremity or mobility disabilities or spinal cord injury. This product can be used sitting, standing, or with a wheelchair and consists of a rectangular metallic frame with a horizontal crossbar just above center that mounts on a wall. Two resistance bands (included) are attached to the vertical sides of the frame. The bands can be attached at multiple points up and down the frame to adjust to the user’s ...[More Information]
    
    
53. RESISTANCE GYM 400 The Resistance Gym 400 is an arm exerciser designed for use by people with balance, lower extremity or mobility disabilities or spinal cord injury. This unit can be used sitting or standing or with a wheelchair. This product consists of a rectangular metallic frame with a horizontal crossbar just above center that mounts on a wall. Two resistance bands are attached to the vertical sides of the frame. The Resistance Gym 400 comes with two sets of three different resistance bands capable of seven ...[More Information]
    
    
54. RESTORATOR III HOME MODEL (922141) The Restorator III Home Model, 922141, is a hand-or leg-propelled bicycle exerciser designed for home use by people with physical disabilities. The device consists of two pedals with foot or hand loops attached to a frame; a front T-bar provides stability. The unit features a clamp system for attaching to a chair or wheelchair, a resistance adjustment knob, and adjustable pedal length....[More Information]
    
    
55. RICKSHAW REHAB EXERCISER (MODEL 3000) The Rickshaw Rehab Exerciser, model 3000, is an exercise machine designed for use by individuals who use manual wheelchairs. This machine builds muscle strength by duplicating the arm and shoulder motions needed for wheelchair propulsion, transfer, and pressure relief. It enables users to strengthen specific arm and shoulder muscles by facing forward or backward while seated in the wheelchair, and pumping weighted oars. The machine can be customized for an individual program by using equal weigh...[More Information]
    
    
56. ROLYAN DOUBLE CURVED SHOULDER ARC (MODEL A405-0) The Rolyan Double Curved Shoulder Arc, model A405-0, is an arm exerciser designed for use by individuals with upper extremity disabilities. This unit features a metal base, a lopsided M-shaped double curved arc, and 24 plastic tabs that can be placed on the arc to be manipulated for range of motion activities. Moving the colored tabs from one side of the arc to the other achieves full upper extremity range of motion and improved motor planning and visual tracking skills. The unit can also be us...[More Information]
    
    
57. ROLYAN HORIZONTAL RING TREE (MODEL A4055) The Rolyan Horizontal Ring Tree, model A4055, is an arm exerciser, an eye hand coordination exerciser and a perceptual training activity designed for use by individuals with neurological or upper extremity disabilities or burns. The Ring Tree consists of a vertical post supporting three horizonal bars of varying length. Rings of differing dimensions are placed on the bars in a variety of exercise patterns that can be customized by adjusting the length and height of the horizontal rods by placing...[More Information]
    
    
58. ROLYAN INCLINE BOARD (MODEL A4101) The Rolyan Incline Board, model A410-1, is an arm exerciser designed to increase muscle strength and endurance for indivudals with limited upper limb mobility. Made of durable molded plastic, the unit can be used bilaterally or with one hand and can be mouted to a table top or clamped temporarily. The board holds a square platform on a metal runner with handles on either side. Users pull down on a handle or both handles to move the platform. The board can be positioned at different angles to pro...[More Information]
    
    
59. ROLYAN MR. WRISTER (MODEL A3601) The Rolyan Mr. Wrister, model A360-1, is an arm exerciser designed for use by individuals with upper extremity disabilities. Intended to strengthen shoulders, arms, and wrists while building endurance and range of motion, the device consists of a bar with two sets of comfortable rubber handles. The inner set is used for isolating forearm, wrist and hand motion. A heavy-duty vertical webbing strap in the middle of the bar is used to hold cuff-style weights (not included). DIMENSIONS: The bar is...[More Information]
    
    
60. ROLYAN SEMI-CIRCULAR PEG BOARD (MODEL A4057) The Rolyan Semi-Circular Peg Board is a finger, hand, and arm exerciser designed for use with individuals with hand injuries, neurological involvement, or orthopedic injuries. Positioned on a table or mat, the peg board can be used to increase upper extremity range of motion, strength, coordination and endurance, and to improve cognitive and visual skills. The plastic board consists of three semi-circular tiers that hold 43 pegs. All parts are plastic and washable. DIMENSIONS (LxWxH): The board ...[More Information]
    
    
61. ROLYAN SINGLE CURVED SHOULDER ARC (MODEL A4051) The Rolyan Single Curved Shoulder Arc, model A4051, is an arm and hand exerciser and an eye hand coordination exerciser designed for use by people with neurological or upper extremity disabilities. Designed for range of movement and pinch strengthening activities, the unit features a hardened aluminum base that holds a curved plastic tube with 24 movable colored tabs for range of motion exercises. The base may be anchored to a tabletop through pre-drilled holes or clamped to a surface (clamp not...[More Information]
    
    
62. ROLYAN STACKING CONE PATTERN BOARD (MODEL A5002) The Rolyan Stacking Cone Pattern Board, model A500-2, is an arm exerciser and eye hand coordination activity designed for use with individuals with upper extremity or neurological disabilities. This set aids in increasing upper extremity range of motion, working in proprioceptive neuromuscular facilitation patterns or compensating for unilateral neglect or hemianopsia. The plastic board features 54 screw inserts that accommodate six stacking cone bases. Decals in seven colors allow the therapist...[More Information]
    
    
63. ROLYAN VERTICAL RING TREE (MODEL A4142) The Rolyan Vertical Ring Tree, model A5152, is an arm exerciser, eye hand coordination exerciser and perceptual training activity designed to improve range of motion, manipulation, endurance and sequencing. The kit consists of a base, six vertical rods of varying height and width, and a set of 12 corresponding rings for each rod. The kit can be disassembled and conveniently packed into the covered base for storage. OPTIONS: A set of 72 additional rings is available. DIMENSIONS (LxWxD): The base ...[More Information]
    
    
64. SARATOGA CYCLE The Saratoga Cycle is a bicycle arm or leg exerciser designed for use by individuals with upper and/or lower extremity disabilities. This adjustable, stationary exercise cycle is placed on a table and used with the included handgrips for upper extremity exercise. The unit can also be placed on the floor and used with the optional foot pedals for lower extremity exercise. Adjustable, lever-type resistance control allows full resistance range. Other standard features include a padded forehead rest...[More Information]
    
    
65. SHOULDER EXERCISER SYSTEM The Shoulder Exerciser System is an overhead pulley exerciser designed for use by individuals with upper extremity disabilities. The metal pulley system features a removable over-door mounting system. Designed to build upper body strength, the system can be used with one or two hands....[More Information]
    
    
66. SOUTHPAW BEAN BAG TOSS (MODEL 1821) The Bean Bag Toss, model 1821, is a game designed to work motor skills for individuals with a physical disability. It promotes proprioceptive skills, encourages range of motion, and improves eye-hand coordination. The client simply tosses the bean bags through the brightly colored hot air balloon holes displayed on the sky blue background. The easle which collapses for storage, has rounded corners and a rubber edge guard for safety. SIZES: Comes with large and small bean bags. DIMENSIONS: Board ...[More Information]
    
    
67. SOUTHPAW FISHING GAME (MODEL 1826) The Fishing Game, model 1826, is designed to promote eye hand coordination and perception training for individuals with a physical disability. Made with washable hook and loop fabric, it only takes a touch of the fishing hook to catch one of the fish. The pole has an adjustable slide weight to provide full range proprioceptive feedback and is sized to fit clients' hands of all sizes. The kit comes with one fishing pole, two starfish, two seahorses, two fish, one weighted fish, extra fish fabric ...[More Information]
    
    
68. SOUTHPAW SPECIAL RIDER (MODEL 1982) The Special Rider, model 1982, is a riding toy designed to provide support for positioning and smoother riding mobility for children with lower extremity and poor trunk control. The child controls the Special Rider by swinging the handle bars from side to side. It allows the physically limited child to become self propelled and engage in fun upper extremity and trunk exercise. By providing normal play activity, it helps to promote visual perceptual skills, enhance motor planning, and provide ves...[More Information]
    
    
69. SOUTHPAW THERAPY ROCKETS (MODEL 3089) Therapy Rockets, model 3089, are rockets designed for working on trunk rotation and joint compression for individuals with a physical disability. As the client aims the rocket they develop targeting, visualization, and body scheme. It is made of foam that has enough weight to give perceptual feedback, but is light enough for small clients to hold. The rockets come in a set of four with a special holder and are easy to store and transport. DIMENSIONS: 40 inches long. GUARANTEE: One full year from...[More Information]
    
    
70. SOUTHPAW TIC TAC TOE (MODEL 1825) Tic-Tac-Toe, model 1825, is a bean bag game designed build proprioceptive skill, encourage range of motion and improve eye-hand coordination for individuals with a physical disability. The game is made of durable, easy to clean, heavy vinyl and comes with ten weighted bean bags. DIMENSIONS: Vinyl board is 24 x 24 inches. GUARANTEE: One full year from shipping date....[More Information]
    
    
71. SPIN TRIM The Spin Trim is an arm and hand exerciser designed for people with lower extremity and mobility disabilities, people who use wheelchairs, and other individuals who have conditions that cause them to lead sedentary lifestyles. The Spin Trim consists of a plastic circle with a handle that extends perpendicular to it. The user holds the handle and moves the hand and arm in a circular motion. The manufacturer states that the device uses patented gyroscopic technology to work the user's hands, wrist...[More Information]
    
    
72. SPIRIT 630 ARM CYCLE The Spirit 630 Arm Cycle is an arm exerciser designed for use by individuals with upper extremity disabilities. This freestanding arm cycle is equipped with an open wheelchair- accessible base and handgrips. Features include an 18-pound iron internal flywheel; adjustable cycle-to-floor angle; variable resistance; QuickExchange standard handgrips; foot plates with ankle/toe straps; mobility casters; and an electronic digital display of speed, pedal revolutions per minute, total pedal revolutions,...[More Information]
    
    
73. SPIRIT 660 ARM-AND-LEG CYCLE The Spirit 660 Arm-and-Leg Cycle is a bicycle exerciser designed for use by individuals with lower extremity or upper extremity disabilities. This cycle has integrated upper/arm crank-arms and lower/leg crank-arms which lock together so that the user's arms and legs raise and lower in an alternating rhythm. The lower/leg crank-arms are shorter than the upper/arm crank-arms, causing the legs to flex more slowly than the arms. Features include Quick Exchange (QE) standard hand grips; foot plates w...[More Information]
    
    
74. SPIRIT 690 SELECTABLE ARM, LEG, AND ARM-AND-LEG CYCLE The Spirit 690 Selectable Arm, Leg, and Arm-and-Leg Cycle is a bicycle exerciser designed for use by individuals with lower extremity or upper extremity disabilities. This cycle can be used for arm-only, leg-only, or arm-and-leg cycling. The change of exercise mode is made without tools using two pins. Clutched releases allow the user to switch from arm-and-leg rotation to arm-only rotation or leg-only rotation. Other features include Quick Exchange (QE) standard hand grips; foot plates with ank...[More Information]
    
    
75. STROKE REHAB EXERCISER ---DO IT YOURSELF ENTRY --- PURPOSE: To enable individuals undergoing stroke rehabilitation of the arms to exercise independently. This modified chair has two 5/8-inch steel "runners" firmly attached on either side with both vertical and horizontal sponge padded steel slider tubes that allow for consistent, controlled exercise of both the left and right arm, as required. Another chair on either side allows for multiple users. TITLE: The Stroke Rehab Exerciser. WEB SITE: Workshop Solutions at ht...[More Information]
    
    
76. SXT7000E2 TOTAL BODY ELLIPTICAL WITH EASY ENTRY The SXT7000e2 Total Body Elliptical With Easy Entry is an exercise machine and arm and leg exerciser designed for use by seniors, people and others who need easier entry and support. This whole body cross trainer provides a natural total body movement that creates a true-to-life walking cadence. Orthopedic Bio-Flex footbeds improve circulation and eliminate hot spots and numbness. Pedal movement simulates uneven surface to recruit stabilizing muscles. Torso rotation and core muscle recruitment ...[More Information]
    
    
77. TAILWIND ARM REHABILITATION DEVICE The Tailwind is an arm exerciser designed for use by individuals with brain injury or who have had strokes. Designed for independent use at home or during rehabilitation therapy,the device consists of two handles that move along independent, resistance-free tracks. The patient moves the handles along each track at a certain starting mark in response to auditory cues. The retraining program includes instruction in adjusting the track further away from the user’s body as more arm mobility is gaine...[More Information]
    
    
78. TATER TOSS Tater Toss is a game designed for use with children with upper extremity or perceptual disabilities. This "hot potato" game enables players to work on passing and tossing skills as well as body awareness and postural stability by playing in different developmental positions. Whoever is holding the when its timer runs out and the bell rings is out....[More Information]
    
    
79. TETHER BALL (MODEL 8033) The Tether Ball, model 8033, is an upper extremity exerciser designed for use by individuals with upper extremity disabilities. The set includes a frame that clamps to a tabletop or wheelchair lapboard with the included clamp. Also included are three textured balls for striking that clip to the frame (balls may vary). DIMENSIONS (HxW): 24 x 11 inches....[More Information]
    
    
80. THERA-BAND EXERCISE TUBING Thera-Band Exercise Tubing is an exerciser band for persons with upper ir lower extremity disabilities. Made of natural rubber, the stretchable tubing is available in 7 color-coded levels of resistance. Proper use for resistive exercise provides both positive and negative force on the muscles, improving strength, range of motion, and cooperation of muscle groups. Progressive resistance is color-coded as levels increase in difficulty from tan to silver. resistance levels are determined by thickn...[More Information]
    
    
81. THERA-BAND FLEXBAR (MODELS 26107, 26100, 26101 & 26102 ) The Thera-Band FlexBar, models 26107, 26100, 26101 and 26102, is a progressive resistive arm exerciser designed for use to improve grip strength and upper extremity stabilization, or as a treatment for wrist, elbow, or shoulder injuries such as tennis elbow. The user grasps the flexible bar at either end and bends it into a U shape. The unit has a ridged surface for enhanced grip during use. The unit can be manipulated with a bending, twisting, or oscillation movement. The unit is made from dry...[More Information]
    
    
82. THERA-P BARS Thera-P Bars are arm exercisers designed for use by individuals with upper extremity disabilities. These self-contained weight bars can be used in a supine, sitting, or standing position to increase upper extremity strength and range of motion, as well as to improve endurance, balance, and motor skills such as grasp and release. These weights are available individually in .5-pound increments or in a color-coded set of five weights ranging from one to five pounds....[More Information]
    
    
83. THERACYCLE 200 The Theracycle 200 is a powered bicycle exerciser designed for use by individuals with lower extremity or neurological disabilities. This semi-recumbent bicycle exerciser helps provide full-body assisted range of motion exercise. The Theracycle 200 features an extra-large cushioned seat and seat back and adjustable handle bars that move forward and back as the foot pedals are moved. It has a steel frame, wide legs and lower center of gravity to promote safety and stability. The Theracycle 200 ha...[More Information]
    
    
84. THERACYCLE PRO The Theracycle PRO is a powered bicycle exerciser designed for use by individuals with lower extremity or neurological disabilities. This semi-recumbent bicycle exerciser provides power- assisted range of motion exercise for legs, arms and torso. It has a steel frame, wide legs and low center of gravity that promote safety and stability. The Theracyle PRO has a large seat that swivels for easy access and egress; pedals with adjustable straps that securely hold the feet on the pedal; adjustable h...[More Information]
    
    
85. THERAPYCYCLE The TherapyCyclePC is an arm or leg exerciser designed for use by individuals with upper or lower extremity disabilities, stroke,or cardiac disabilities. The cycle-style unit can be placed on a table for seated or standing upper extremity use or on the floor for lower extremity exercise and uses magnetic resistance for smooth pedal motion. The cycle includes a set of standard and Velcro pedals. The unit features a digital display, variable resistance, hand/foot loops on the pedals, and tracking ...[More Information]
    
    
86. THERAPYCYCLEPC The TherapyCyclePC is an arm or leg exerciser designed for use by individuals with upper or lower extremity disabilities, stroke,or cardiac disabilities. The cycle-style unit can be placed on a table for seated or standing upper extremity use or on the floor for lower extremity exercise. The unit features a digital display, hand/foot loops on the pedals, and tracking log software to enable user progress to be tracked. The unit tracks time, average and maximum speed, distance traveled, and calor...[More Information]
    
    
87. THERAPYTRAINER The TherapyTrainer is an arm or leg exerciser designed for use by individuals with upper or lower extremity disabilities, stroke,or cardiac disabilities. The cycle-style unit can be placed on a table for seated or standing upper extremity use or on the floor for lower extremity exercise. The unit uses magnetic resistance for smooth pedal motion and includes a set of standard and Velcro pedals. The unit features a digital display, variable resistance, hand/foot loops on the pedals, and tracking l...[More Information]
    
    
88. VERSACLIMBER (CLINICAL MODEL, CL-108C) VersaClimber is a step-pedal-climb exercise machine for non-weight bearing sit down or stand up exercise for arms only, legs only, or arms and legs. It was designed for and is in use by various levels of paraplegics; leg injured individuals; brain, spinal cord injury, and stroke individuals; individuals needing cardiac rehabilitation; and persons with acute/chronic back injury/pain. The original VersaClimber is a zero impact, hydraulically resisted, vertical climbing machine that provides total ...[More Information]
    
    
89. WATER WEIGHT BELLS (MINI-BELLS) Water Weight Bells, also known as Mini-Bells, are swimming pool exercise equipment designed for use in aquatic therapy. These hollow poly-propylene dumbbells have four blades at each end for resistance and stability. Removable end caps allow the bell to be filled with water for neutral buoyancy or with air for additional flotation. COLOR: Teal....[More Information]
    
    
90. WHEELCHAIR GYM The Wheelchair Gym is a progressive resistive arm exerciser designed to provide upper extremity exercise for people with mobility disabilities who use a wheelchair. Wheelchair users may access this exercise machine since a wheelchair fits within the U-shaped base, which has a rubber mat to help the wheelchair stay in place. The user grips the upper end of two arms extending from the base, moves them up and forward. The circular grips at the top of the arms can be rotated to four positions to fit...[More Information]
    
    

Page 1 of 1