Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu
Skip to Quick Links

Arm Exerciser

Products are listed alphabetically.

Page 1 of 3    Next page »

  1. ABLEWARE EXER-TWIST Picture of ABLEWARE EXER-TWIST The ABLEWARE Exer-Twist is an arm exerciser designed for use by individuals with upper extremity disabilities. This device equally and simultaneously exercises the left and right side muscles of the forearms, arms, shoulders, and chest, helping to increase wrist and joint circulation and agility. To use, the user simply twists the device with the same motion that would be used to wring out a wet towell. OPTIONS: Snap on grips are available for those with larger hands or those who are unable to c...[More Information]

  2. AIR GUITAR HERO Picture of AIR GUITAR HERO -------- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted version of “Guitar Hero” for individuals with upper limb disabilities or amputation to provide fun, entertaining and therapeutic exercise. “Air Guitar Hero” is an adaptation created by biomechanical engineer Robert Armiger and surgical roboticist Carol Reiley of Johns Hopkins University. The device translates the electrical impulses that occur between a muscle and the brain in the form of a guitar strum. Originally conc...[More Information]

  3. APT-1 HI-LO ACTIVE PASSIVE TRAINER Picture of APT-1 HI-LO ACTIVE PASSIVE TRAINER The APT-1 Hi-Lo Active Passive Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors or individuals with neurological or physical disabilities. The unit is mounted on an adjustable stand so it can be positioned for either arm or leg exercise. It can be positioned low near the floor for lower body exercises or raised up to table top height for upper body workouts. An assortment of accessories are available to enable users with a...[More Information]

  4. APT-1 PORTABLE ACTIVE PASSIVE TRAINER Picture of APT-1 PORTABLE ACTIVE PASSIVE TRAINER The APT-1 Portable Active Passive Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. This portable standalone unit with an adjustable angle base can be used on a table top for upper body workouts, or on the floor for lower body exercise while the user is seated in a wheelchair or chair. An assortment of accessories are available to enable users with a variety of phy...[More Information]

  5. APT-5 ACTIVE PASSIVE DIGITAL TRAINER Picture of APT-5 ACTIVE PASSIVE DIGITAL TRAINER The APT-5 Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. This portable, standalone unit with an adjustable angle base can be used on a table top for upper...[More Information]

  6. APT-5 HI-LO ACTIVE PASSIVE DIGITAL TRAINER Picture of APT-5 HI-LO ACTIVE PASSIVE DIGITAL TRAINER The APT-5 Hi-Lo Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. The unit is mounted on an adjustable stand so it can be positioned for either arm or leg ex...[More Information]

  7. AXIAL RESISTANCE SHOULDER WHEEL (MODEL 600) Picture of AXIAL RESISTANCE SHOULDER WHEEL (MODEL 600) The Axial Resistance Shoulder Wheel, model 600, is an arm exerciser for people with upper extremity disabilities. The chrome plated, wall mounted wheel is calibrated to monitor progress. It comes with a choice of grips for each exercise, and the height adjusts for standing or seated patients. Additional features include interchangeable attachments with holder/bracket. DIMENSIONS: 6 to 39 inches range of motion....[More Information]

  8. CABLE CHEST PULL (MODELS CP10 & CP20) Cable chest pull exerciser. Metal cables are attached to handles on either side. 3 cable model gives medium pull, 5 cable model gives heavy pull....[More Information]

  9. CAN DO Resistive exerciser. Metal bar with pedals, clamps on to chair. Pedaling motion offers resistance to upper or lower extremities. Resistance can be controlled by braking device. Adjusts to any arm or leg length....[More Information]

  10. CHAIR AND LADDER --- CUSTOM ADAPTATION --- PURPOSE: To provide practice in moving from sitting to standing. A plywood stool was mounted to a plywood base. In front of the stool, also on the base, is mounted a plywood ladder with hardwood rungs. The ladder is braced with barckets attached to the ladder and the base on the side away from the user. The user grasps the rungs of the ladder to pull himself to a standing position. DIMENSIONS: The ladder is 850 millimeters (mm) high. The rungs are 70 mm apart. TITLE: Ha...[More Information]

  11. CHATTANOOGA DELUXE RESISTIVE PEDAL EXERCISER Picture of CHATTANOOGA  DELUXE RESISTIVE PEDAL EXERCISER The Chattanooga Group Deluxe Resistive Pedal Exerciser is a bicycle exerciser designed for use by individuals with upper or lower extremity disabilities. This lightweight, fully automatic exerciser features pedals with hand/foot loops; a multi-functional electronic monitor with LED display to track speed, distance, total mileage, total time used, and calories used; and quick dial variable resistance. WEIGHT: 16 pounds....[More Information]

  12. CHATTANOOGA GROUP RESISTIVE PEDAL EXERCISER Picture of CHATTANOOGA GROUP RESISTIVE PEDAL EXERCISER The Chattanooga Group Resistive Pedal Exerciser is a bicycle exerciser designed for use by individuals with upper or lower extremity disabilities. This lightweight manual exerciser can be used with the arms or legs and features pedals with hand/foot loops and a tension/resistance setting knob. WEIGHT: 5 pounds. COLOR: Chrome with black pedals and knob....[More Information]

  13. COGNITOYS SET (MODEL 5152) Picture of COGNITOYS SET (MODEL 5152) The Cognitoys Set, model 5152, is an arm exerciser and an eye hand coordination exerciser designed to improve reach, range of motion, midline crossing, and upper extremity strength and endurance through graded repetitive exercise for children and adults with physical and cognitive disabilities. The set consists of a wooden base with four removable wooden dowels of varying heights and 16 brightly colored firm foam shapes (rectangles, squares, triangles, and circles) with holes through the center ...[More Information]

  14. COLORADO SPORT CYCLE Picture of COLORADO SPORT CYCLE The Colorado Sport Cycle is a bicycle arm or leg exerciser designed for use by individuals with upper and/or lower extremity disabilities. This adjustable, stationary exercise cycle is placed on a table and used with hand grips for upper extremity exercise. The unit can also be placed on the floor and used with the optional foot pedals for lower extremity exercise. The unit provides a choice of forward or bi-directional resistance. Standard features include lever-controlled resistance adjustment...[More Information]

  15. DOOR PULLEY, THE (MODEL H70908) The Door Pulley, model H70908, is an overhead pulley exerciser designed for upper extremity exercises. The device is easy to set up and remove; it fits over the top edge of any door up to 1.75 inches thick. Rubber bumbers protect the door's surface. A 1.75-inch diameter, low friction plastic swivel and pulley, two hand stirrups with wood grips, and a high strength rope are included. The plated metal frame extends out 15 inches from the door. WEIGHT: Shipping weight is 3 pounds....[More Information]

  16. EXER-TWIST EXERCISER (MODEL 70926) The Exer-Twist Exerciser, model 70926, is an arm and hand exerciser designed to exercise the muscles of the hand, wrist and arm, and isometrically, the chest and shoulders. The device is used by twisting the two ends that fit together, like wringing a towel. Resistance is adjustable for progressive exercise. Extra pairs of larger snap-on grips provide extra support to hand structures or accommodate limited hand closure. DIMENSIONS: 7.75 inches long x 1.5 inches in diameter. Extra grips are 2 inc...[More Information]

  17. FITTER PHYSIO TONER SHOULDER KIT Picture of FITTER PHYSIO TONER SHOULDER KIT The Fitter Physio Toner is a shoulder and arm exerciser kit designed to be used in a clinical setting or at home for the rehabilitation of individuals with shoulder injuries or individuals wanting to strengthen their shoulders. The exerciser works the shoulders and arms by means of a simple pulley system. The device can be set up using a door frame, and may be used standing or sitting. COMPONENTS: The shoulder kit includes a shoulder pulley for range of motion, a Physio Toner cord for strengthen...[More Information]

  18. FRICTION ENERGY SYSTEM. Exercise equipment consists of 7 by 19 inch cabinet which contains a sliding exercise apparatus for push-pull action, two wrist or ankle weights, two stretch cords, and a manual. A "Sawyer System" which utilizes a 12 inch miter saw and miter box for similar push-pull action is also available. ....[More Information]

  19. Floor Bars. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Frame with bars designed so a child can do press-ups from a sitting position for arm development. Device consisting of a plywood board 18 by 22 inches, corner blocks, brackets and uprights, and two round bars 1 inch in diameter and 22 inches long. Can be made so the height of the bars is adjustable. Includes drawings. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir P...[More Information]

  20. GLITTER ROLL (MODELS 160H, 1698H, & 1695H) Picture of GLITTER ROLL (MODELS 160H, 1698H, & 1695H) The Glitter Roll is an adapted music box designed to provide multi-sensory stimulation for children with physical, cognitive and/or sensory disabilities. The clear cylindrical roller contains a potpourri of sparkling shapes which, when rotated, activates the music box. These cylinders have rolling pin style handles to encourage bilateral hand use and aid in strengthening the upper extremities. Model 160H also plays music, model 1698H offers music and lights, and model 1695H has lights and vibrat...[More Information]

  21. GOING (MODELS 3800 & 3801) The Going, models 3800 and 3801, is an activty designed develop eye hand coordination and challenge motor planning skills for individuals with a physical disability. It is basically a football shaped object (the going) attached to two strings. On the end of the strings are handles with special protestors. The clients move the going back and forth by pulling the strings apart from one another. SIZES: Medium and large. DIMENSIONS: Length of string from one set of handles to the other set is 14 fee...[More Information]

  22. GYM-RING Gym-Rings are tubular, plastic rings designed for gross motor activities such as ring toss or exercises for the hands, fingers, and arms. The rings may be combined with Theraband (see separate entry) or used to keep balles stable and in place. DIMENSIONS: 7 inches in diameter. COLOR: Red, yellow, blue, and green....[More Information]

  23. LIFELINE WALL PULLEY SYSTEM & PORTABLE LIFELINE GYM The Lifeline Wall Pulley System is an overhead pully arm exerciser designed to provide therapuetic or body-building exercises based on the principle of variable resistance in home or clinical settings for able-bodied individuals, wheelchair users, and others in physical rehabilitation. This wall-mounted system includes three 28 7/8-inch channels which are mounted to a stud (lag bolts included). A 10-inch overhang unit is mounted to the top of the channel to allow for clearance from the wall for ...[More Information]

  24. LIMBER LADDER (MODEL 8670) The Limber Ladder, ##8670, is a shoulder ladder and arm exerciser for back and shoulder stretches. The ladder is made of polypropylene rope with high strength chlorine resistant, tubular plastic rungs. The ladder can be used for water workouts in the pool (the ladder will float if dropped), or for warm up exercise routines to increase flexibility. The 2 ladder sections can be interlocked for additional exercise applications. DIMENSIONS: Each section is 26 inches long. COLOR: Yellow and tan....[More Information]

  25. METALIUS GRIP SAVER PLUS The Metolius Grip Saver Plus is an arm, hand, and finger exerciser designed for use by individuals with finger, wrist, and elbow injuries or disabilities. This exerciser is designed to strengthen and balance the muscles of the hand, wrist, and forearm for rehabilitation and prevention of finger, wrist, and elbow injuries. The exerciser allows the hand to move through a full, natural range of motion, using both the flexion (closing) motion and the extension (opening) motion. The set includes two ...[More Information]

Page 1 of 3    Next page »

View discontinued Products (76)

AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
by ICF Macro under Contract No. ED-04-CO-0018/0007.

The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.