Products are listed alphabetically.

« Previous page    Page 2 of 2

26. MANUAL HEIGHT ADJUSTABLE WORK TABLE (MODEL 8858A) The Manual Height Adjustable Work Table, model 8858A, is an accessible table or workstation designed for use by individuals who use wheelchairs. Made with double pedestals to accommodate wheelchair users, the table height adjusts by means of a fold-away hand crank extending from the pedestals. The table features a wide laminate top that allows for extra work space. OPTIONS: Maple, formica, or steel table tops are available. DIMENSIONS: The top is 36 x 60 inches and the height adjusts from 26 to...[More Information]
    
    
27. MANUAL HEIGHT-ADJUSTABLE ACTIVITY TABLE The Manual Height-Adjustable Activity Table is an accessible table or computer workstation designed for use by individuals who use wheelchairs. The table height adjusts with a hand crank system. The table has a laminate top. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 27 to 39 x 60 x 30 inches. ...[More Information]
    
    
28. MARATHON TABLE The Marathon Table is a height-adjustable computer workstation designed for use by individuals who use wheelchairs or who stand to work. Depressing a release paddle enables immediate, yet controlled, surface height positioning. A two-way brake locks the work surface in both upward and downward directions. For user safety, a weight-sensing interlock releases the brake only when the table is properly counterbalanced. Counterbalance supports loads between 75 and 225 pounds, allowing immediate adjus...[More Information]
    
    
29. MED II, MED IIE, MED IIF. Accessible U shaped activity table. One piece molded fiberglass top is 18 inches wide with slate look finish. Available in standard colors; custom colors extra. Outer measurements are 72 inches wide by 48 inches deep; inner measurements, 36 inches wide by 30 inches deep. Med II has twin wheel casters, 2 locking and 3 nonlocking; five leg height adjustments from 27 inches to 33 inches. Med IIE has telescoping legs held in position with thumb screws; legs are equipped with plastic end caps. Med II...[More Information]
    
    
30. MED IV DINING AND ACTIVITY TABLE Four place dining and activity table accommodates wheelchairs with elevated leg rests. Wheelchairs may be staggered or placed all on one side. Nickel chrome legs have twin wheel casters, 4 locking and 2 nonlocking. One piece molded top is heat and stain resistant; measures 104 inches by 20 inches; has slate look finish. Leg height adjusts to 27 inches, 28 1/2 inches, 30 inches, 31 1/2 inches or 33 inches. Available in standard colors; custom colors extra....[More Information]
    
    
31. MIDLAND COMBINATION WORK TABLE (MODEL 7081) The Midland Combination Work Table, model 7081, is a height adjustable tilt top worktable designed for use by individuals who use wheelchairs. Designed for use with tilt table or wheelchair, this adjustable height table accommodates children and adults. The table top may be tilted to various positions with a 45 degree maximum tilt. Features include tubular steel frame mounted on 3- inch swivel casters with locks. DIMENSIONS: Height adjusts from 26 to 40 inches. Table top is 30 by 36 inches....[More Information]
    
    
32. MIDLAND ROUND WORK TABLE (MODEL 8859F) The Midland Round Work Table, model 8859F, is a height adjustable, swivelling work table designed to accommodate up to four wheelchair users. The table features a solid wood butcher block top on a metal pedestal with a hydraulic lift mechanism. DIMENSIONS: The height adjusts from 27.5 to 34 inches and the top is 48 inches in diameter. The base is 24 inches in diameter....[More Information]
    
    
33. MODEL 100 WORKSTATION The Model 100 Workstation is a height adjustable desk or computer work center designed for use by individuals who use wheelchairs.The unit features a steel frame, a height-adjustable worksurface, an EasyRoll wheelchair platform, and a ramp. This desk is available with either manual hand crank or a motorized height adjustability of the worksurface. Hand crank models have a foldable hand crank (.5 inches of adjustment per revolution) and the motorized models have push button controls. The works...[More Information]
    
    
34. MODEL 200 WORKSTATION The Model 200 Workstation is a height adjustable desk or computer work center designed for use by individuals who use wheelchairs. The unit features an aluminum frame, a fixed height worksurface with a backsplash, an EasyRoll wheelchair platform, and a ramp. The worksurface is made from plywood with WilsonArt plastic laminate. The ramp and platform are covered in nonskid rubber. The workstation includes an EasyRoll wheelchair platform, which allows the user to move laterally for the length of t...[More Information]
    
    
35. PERSONAL WORK TABLE WITH TILT TOP (MODEL 76-31K) The Personal Work Table with Tilt Top, model 76-31K, is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. The top tilts from 0 to 50 degrees and is equipped with a lip on the front edge to keep objects in place. The legs are adjustable with an indexing plunger. OPTION: 3.5-inch locking dual-wheel casters. DIMENSIONS (HxLxW): 23 to 33 x 36 x 30 inches....[More Information]
    
    
36. Pediatric Adjustable Table. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Table which can be folded against the wall and can be adjusted in height from 18 1/2 to 32 1/2 inches so it can be used by children and adults. Describes hinged table which moves up and down a track on a backboard on the wall. The table can be adjusted by one person. Includes a drawing and photographs. SKILLS REQUIRED: Woodworking. AUTHOR: Rousseau, Y TITLE: Pediatric Adjustable Table JOURNAL: Canadian Journal of Occupational Therapy REF: Vol 51 no...[More Information]
    
    
37. REVERSABLE QUARTER-ROUND TABLE The ReversABLE Quarter-Round Table is a wheelchair- accessible manual height adjustable therapy table designed for clinic use. This table combines a hand therapy with an activity board and accommodates two users. The activity board inserts rotate 360 degrees and have a laminated surface on one side and an oak pegboard with 100 holes on the other; the inserts can be locked flat or at a 60-degree angle. A set of 200 easy-grip stackable pegs is included. DIMENSIONS: The front radius is 94 inches an...[More Information]
    
    
38. RFI MULTI-USE DESK / TABLE. Adjustable height worktable from 21 to 34 inches. 44 inches wide by 24 inches deep. Red oak frame, contoured matching laminate work surface. Designed spill rail, prosthetic device holder, side mounted book caddy. Accommodates children and adults....[More Information]
    
    
39. SIERRA ELECTRIC ADJUSTABLE WORKCENTER The Sierra Electric Adjustable Workcenter is a powered height adjustable computer work station designed for use by individuals who use wheelchairs, individuals of short stature, individuals who stand to work, and others who can benefit from a higher or lower work station. The surface height adjusts at 2 inches per second, with a lifting capacity of 250 pounds. The backlit liquid crystal display (LCD) control panel has tactile soft-touch control buttons and three programmable memory height preset...[More Information]
    
    
40. SINGLE-STUDENT WHEELCHAIR TABLE (MODEL FW2560) The FW2560 Single-Student Wheelchair Table is an wheelchair accessible adjustable height table for wheelchair users in educational, medical institutions, nursing homes and industry. The tables' continuous height adjustment operates manually with a mortorized control option. The table can be raised to clear wheelchair arms by the impaired individual. The operating controls are mounted on the right hand side of the table, with a left hand mounting options at additional cost. The surface is made o...[More Information]
    
    
41. SINGLE-SURFACE HEIGHT-ADJUSTABLE WORK STATION The Single-Surface Height-Adjustable Work Station is a height-adjustable work table designed to accomodate both manual and powered wheelchair users. The height is adjusted using a hand crank which retracts out of the way when not in use. A comfort recess enables the user to get close to the table to maximize usable surface area. Casters provide mobility. OPTIONS: Articulating keyboard arm. DIMENSIONS (HxLxW): The work surface is 48 x 30 inches. The height is adjustable from 24 to 34 inches. COLO...[More Information]
    
    
42. THERASHAPE GROUP TABLE The Therashape Group Table is a therapy table designed for use by individuals who use wheelchairs or in activities requiring close proximity to the table. The table is curved with cut out areas to accommodate three individuals. The table is height-adjustable using hand knobs and the steel powder-coated legs feature knob-style column locks and six adjustable base levelers. DIMENSIONS: The table adjusts in height from 23 to 33 inches. Each of the cut-out areas is 18 inches wide x 10 inches deep. T...[More Information]
    
    
43. THERASHAPE TABLE The Therashape Table is a therapy table designed to be used as a treatment, feeding, or activity table for any healthcare setting. This table accomodates four to five individuals. Three adjustable legs provide seating room and access, and offer height adjustments. The legs feature knob-style column locks, 5 adjustable base levelers, and a steel column. DIMENSIONS (LxW): The table top measures 72 x 28 inches. Table height can be adjusted from 23 to 33 inches. COLOR: Maple-finished high-pressure l...[More Information]
    
    
44. WHEELCHAIR-ACCESSIBLE MOBILE WORKSTATION (MODELS W53191 & W53192) The Wheelchair-Accessible Mobile Workstation is a height-adjustable work table designed for use by individuals who use wheelchairs in schools, training centers, and offices. The work surface is mar-resistant laminate with rounded corners edged with protective vinyl molding. Its open design allows access to and from work surface. The tabletop height is adjustable to accomodate a variety of users. The unit features four casters, two with locking brakes. DIMENSIONS: The height adjusts in one-inch i...[More Information]
    
    
45. WORK TABLE (MODEL 372) The Work Table, model 372, is an adjustable height work surface with a large cutout and raised rim on 3 sides. Top 24 by 24 inches with 12 by 15 inch cutout. Height 22 to 35 inches. Chrome plated steel legs. Other size cutouts on request....[More Information]
    
    
46. Worktable with Support for Standing. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adjustable work table provides extra support and balance needed to prevent employees from falling. Particularly useful for lower extremity amputees. Wooden table top consists of wide hinged armrests and a safety belt. Four adjustable 7/8 inch metal pipes run through standard work bench to serve as legs. Includes photograph and diagram. COMMENTS: Submitted by the Occupational Therapy Department, Institute of Physical Medicine and Rehabilitation, New...[More Information]
    
    

« Previous page    Page 2 of 2