Products are listed alphabetically.

Page 1 of 1

1. ADAPTIVE PRONE STANDER (MODEL 6801) --- DISCONTINUED. (Verified 9/2003) RETAINED IN DATABASE FOR REFERENCE --- The Adaptive Prone Stander 6801 is a prone board stander with casters for children with mild to moderate neuromuscular involvement. This stander allows children to adjust gradually to weight bearing. It has a folding crank to provide infinite angle adjustments from 0 to 71 degrees. The rear wheels are extended for added stability. This model folds flat for transport and storage. Standard equipment includes chest, pelvic, ...[More Information]
   
   
2. ADULT DELTA POWER STAND BASIC & ADULT DELTA POWER STAND MOBILE --- DISCONTINUED. (Verified 03/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Adult Delta Power Stand Basic and the Adult Delta Power Stand Mobile are standing frames designed for use by individuals with mobility disabilities. Both models accommodate individuals from 61.86 inches tall to 78.8 inches tall. The Basic model is a statioary frame The mobile model features a belt-drive system to provide the user with independent mobility while standing. Both models feature a steel frame, a knee pad...[More Information]
   
   
3. BLATNIK POWER LIFT STANDING FRAME. --- DISCONTINUED. (verified 11/95) RETAINED IN DATABASE FOR RECORDS. --- Stationary standing frame raises person in wheelchair from sitting position to standing position. Uses fully self contained electric motor with pneumatic hand controlled switch. 120 volt. Metal frame, wooden platform base and table top, padded knee support. Underarm support covered with sheepskin, hip and ankle supports. Large area chest support. Weight: 75 pounds. 29 inches wide. Fits individuals from 3 feet 5 inches, to 6...[More Information]
   
   
4. CAT & PENGUIN --- DISCONTINUED. (Verified 3/2013) RETAINED IN DATABASE FOR REFERENCE. --- Cat and Penguin are upright standers designed for use by children from 9 months to 4 yearsof age with high muscle tone and postural weakness that prohibit unassisted upright standing. Cat is a small stander, decorated with a smiling cat on either side, and Penguin is a medium sized stander, with penguins with an eyeglass. Both models are equipped with four locking casters, allowing them to be moved from room to room. The...[More Information]
   
   
5. EASYSTAND 5000 (MODELS 5000 & 5200) --- DISCONTINUED. (Verified 02/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Easy Stand 5000 is a standing frame designed for use by individuals with mobility disabilities. This unit utilizes a hydraulic pump and release system to raise and lower the user to and from a standing position. Standard features include an angled seat that flattens to provide support while standing, side supports, an adjustable frame to accommodate users from four feet six inches tall through six feet five inches t...[More Information]
   
   
6. EASYSTAND II --- DISCONTINUED. (Verified 7/2002) RETAINED IN DATABASE FOR REFERENCE. --- EasyStand II is a standing frame designed to make standing fast and simple for people with different abilities. The hydraulic lift system provides controlled lift and lowering. Features of the standing aid include an adjustable front pad; moisture resistant, easy-to-clean vinyl; adjustable legs for uneven floors; cushioned seat, back, arm rests, and knee pads to prevent pressure sores; flip-up arm rests with two height a...[More Information]
   
   
7. ECONOSTAND --- DISCONTINUED. (Verified 03/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Econo Stand is a stationary, hydraulic lift, manual standing frame designed for use by people with mobility disabilities. The unit comprises a steel frame with contoured knee pads, hip and lumbar support belts, foot loops, two .5-inch front casters for transport, and an adjustable plexiglass tray. This device is designed for use by individuals 4 feet 2 inches to 7 feet tall. LIFT: Operated by one two-ton hydraulic...[More Information]
   
   
8. GELART STAND A' EASE --- DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Gelart Stand a' Ease is an aluminum and steel standing frame designed for use by children with severe physical disabilities. It is available in two sizes: The smaller size accommodates children approximately one to six years of age and the larger size accommodates children approximately six to eleven years of age. The unit is adjustable to suit the child's postural and growing needs. The low set foot plate lowers th...[More Information]
   
   
9. GET UP, THE --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Standing frame with exercise attachments for upper extremities. Allows wheelchair user to independently achieve standing position. Aluminum frame. Facilitates stretching of lower tendons and muscles. Can be ordered in two designs, "C"model has circular tubing frame, requires assistance in placing back and hip support. "S" model is steel square tubing frame. Video brochure available upon request. Options: military press, butterfly press, p...[More Information]
   
   
10. LARGE STANDING FRAME --- DISCONTINUED. (Verified 06/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Large Standing Frame is designed for use by children from 48 to 62 inches tall who require support while standing. This frame features push-button adjustable vertical tubing in the upper section, fold-away stabilizer bars for base support, an adjustable heel stop, a cut-out knee rest, and wide denim straps with full-width hook-and-loop and D-ring closure to support the backs of the knees and the buttocks. A removabl...[More Information]
    
    
11. LIGHT STANDING FRAME (MODEL P1861) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- Portable child's standing frame constructed of anodized aluminum tubing. Has large plywood base and stabilizer bars for firm footing. Denim straps with velcro closure and steel rings support the buttocks, chest and knees. Washable and dryable....[More Information]
    
    
12. MINI & MAXI STANDING FRAMES --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Standing frame fabricated of aluminum. Adjustable. Double chest belt, hip belt and knee straps. Velcro fasteners standard. Foam cushioned knee support can be adjusted vertically and horizontally. Mini frame has distance between support bars: 31 centimeters. Vertical adjustment: 82 to 108 centimeters. Belt height top: 18 centimeters, bottom: 15 centimeters. Foot board: 40 by 48 centimeters. Red. Maxi frame has distance between support bars...[More Information]
    
    
13. REX --- DISCONTINUED. (Verified 3/2013) RETAINED IN DATABASE FOR REFERENCE. --- Rex is an upright standing frame designed for use by children ages 3 to 7 years with lower extremity and mobility disabilities who can tolerate upright standing but need added support. This stander covers a range of sizes and grows with the child. The unit is equipped with four locking casters, allowing the stander to be moved from room to room. The knee, hip, and chest supports adjust by sliding up and down to grow with...[More Information]
    
    
14. RIFTON ADJUSTABLE STANDING FRAME (MODEL E79) --- DISCONTINUED. (Verified 5/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Rifton Standing Frame, model E79, is designed for use by children and adolescents with mobility disabilities. Intended for use with individuals who have some weight bearing ability, this frame includes two padded back supports, a pair of padded support blocks, a pelvic strap, a chest strap, a pair of knee contoured and removable blocks, abductor, and adjustable foot and heel blocks. The unit adjusts to accommodate us...[More Information]
    
    
15. SMALL FREEDOM STANDER (MODEL E74) --- DISCONTINUED. (Verified 5/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Small Freedom Stander, model GE74, is a standing frame for children 30 to 48 inches tall designed to allow an individual to stand by applying pressure against the heels and counterpressure at the knees. The stander provides support at the heels, knees, hips, and chest for individuals who are able to bear weight on their legs and require only moderate support. The stander consists of a wooden base with two vertical up...[More Information]
    
    
16. SMALL STANDING FRAME --- DISCONTINUED. (Verified 06/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Small Standing Frame is designed for use by children from 28 to 45 inches tall who require support while standing. This frame features push-button adjustable vertical tubing, stabilizer bars, an adjustable heel stop, an adjustable foot-positioning strap, a denim knee strap, and a denim double buttocks strap with full-width hook-and-loop and D-ring closure. OPTIONS: A birch plywood tray is a available. DIMENSIONS: Th...[More Information]
    
    
17. STANDING FRAME --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Large standing frame for height range 46 to 62 inches. Adjustable height frame 32 to 39 inches. Tubular aluminum frame with plywood base. Supports for buttocks, chest and knees. Folding stabilizer bars. Removable wooden tray. Weight 18 pounds....[More Information]
    
    
18. STANDING FRAMES (MODELS PC 4377S & PC 4377L) --- DISCONTINUED. (Verified 12/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Standing Frames are adjustable supporting device for children from 1 to 7 years. The anodized aluminum frame is attached to a plywood base. Child is held securely at knees, buttocks and chest with soft nylon straps with wide Velcro closures and steel rings. Two stabilizing bars, which fold when the unit is moved, provide wide support beyond the base. Two sizes are available. The small size is designed to fit users 28...[More Information]
    
    
19. STANDMASTER 2000 --- DISCONTINUED. (Verified 03/2009) RETAINED IN DATABASE FOR REFERENCE. --- Standmaster 2000 is a standing frame designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. The wheeled frame is made of powder-coasted aluminum. It can be assembled/disassembled and fits in the trunk of a mid-size car. SIZES: Small, medium, tall. DIMENSIONS (HxLxW): 41.5 x 33 x 28 inches (medium). CAPACITY: 330 pounds. WEIGHT: 35 pounds (medium). COLORS: Red, y...[More Information]
    
    
20. UPRIGHT STANDING FRAME (MODEL 6860) --- DISCONTINUED. (Verified 9/2003) RETAINED IN DATABASE FOR REFERENCE --- The Upright Standing Frame, model 6860, is a supine standing frame for children that is constructed on a wooden platform. The frame has three interchangeable support pads with Velcro fastened straps and a clear, upper extremity support tray. OPTIONS: Roller base with 3-inch locking casters; adjustable lateral supports; and an alternative pelvic bracket for children requiring pad height lower than 11 inches from the base. ...[More Information]
    
    
21. WENZELITE EMBRACE STANDER --- DISCONTINUED. (Verified 02/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Wenzelite Embrace is a standing aid designed for use by children with mobility disabilities. This stander permits prone, vertical, and supine positioning. Standard features include foot restraints and heel cups; height- and laterally-adjustable knee blocks; curved rigid hip supports (for use in prone positioning); individually height- and width-adjustable lateral supports; trunk support (for use in the supine positi...[More Information]
    
    

Page 1 of 1