Products are listed alphabetically.

Page 1 of 2    Next page »

1. ALICIA PRONE STANDER (MODELS APS1, APS2, & APS3) The Alicia Prone Stander is a prone stander designed for use by children with lower extremity, neurological, or walking disabilities. The basic stander includes four lateral supports, two 2-inch straps, contoured knee supports, shoe holders, tray, and locking casters. The tray is height- and angle- adjustable. The stander angle adjusts from 90 to 60 degrees. OPTIONS: Posterior pelvic support gate, back support extension, back/head support extension, and inset activity box. SIZES: Small (model AP...[More Information]
   
   
2. GAZELLE BY R82 The Gazelle is a prone stander designed for use by children with mobility disabilities. Available in three sizes, this stander may also be used for postural drainage and as a tilting table with a variety of adjustments between 15 and 90 degrees. It features a Y-shaped base with four locking wheels, foot-pedal angle adjustment and a degree meter, height- and width-adjustable footrests, rear support, padded chest support, and padded knee supports. The leg rests are independently adjustable with ea...[More Information]
   
   
3. GIRAFFE STANDER The Giraffe Stander is a pediatric prone stander with casters designed for use with children with mobility disabilities. This stander is available as a prone stander only ($1225) or as a three-way system that permits prone, supine, and upright standing ($1525). The prone model includes contoured hip pads, a trunk pad and lateral supports, a chin/thorax pad, knee assembly, and standard footplates. The three-way system includes the same features as the prone stander plus shoulder retractors and a...[More Information]
   
   
4. GROWTH GUIDANCE STANDING SYSTEMS The Growth Guidance Standing Systems is a prone standing system on a wheeled base: toddler, youth or junior sizes. Size adjustments include girth adjustment of pelvic hip control, height and width of knee controls, height of foot controls, height and girth of chest control. Position adjustability includes anterior and posterior bands at all controls, placement of lateral supports, medial lateral position of knee controls, position of chin rest, column tilt, tray angle, position of neckrest and s...[More Information]
   
   
5. KIDSTAND PRONE STANDER The Kidstand Prone Stand is an adjustable prone stander with positioning components. The components a chest board, pelvic board, chest strap, fanny strap, trunk pads, hip pads, independently adjustable footboards, contoured adjustable knee pads, and a Lexan tray. Chin rest and shoulder protraction pads for the tray are also available. The unit is free standing, with 4 locking casters. The stand has a metal frame with red epoxy powdercoat finish and black vinyl upholstery. DIMENSIONS: Two sizes: ...[More Information]
   
   
6. LECKEY PRONESTANDER The Leckey Pronestander is a standing aid designed for use by children and adults with mobility disabilities. This stander permits prone positioning. Standard features include a multi-position chestplate and flexible lateral supports that allow for growth, finite positioning, and trunk control; a pelvic band that encourages mid-line symmetry and weight distribution; height- and laterally-adjustable knee blocks; curved rigid hip supports; and a height- and angle-adjustable tray with a molded rim ...[More Information]
   
   
7. MINI SIZE PRONE SUPPORT WALKER Prone stander and walker for children with 8 to 14 1/2 inch crotch height, 6 1/2 inch chest width or 20 1/2 inch chest circumference. Frame has steel legs, oak tie bar, and four indoor outdoor casters. Encourages various amounts of independent upright weight bearing across trunk and lower extremities and maintains hip abduction. Partial seat stimulates functional use of legs and development of muscle tone. Partial chest support encourages independent trunk balance and alignment. Accessories avai...[More Information]
   
   
8. OMNI STANDER The Mulholland Omni Stander is a mobile standing aid designed to meet a variety of standing needs for children with mobility disabilities. The unit converts from a prone stander to a supine stander to a mobile prone stander. Adjustable postural supports accommodate growth and changing needs. The large, quick-release wheels include handrims for self-propulsion and the stander can be disassembled without tools for transport and storage....[More Information]
   
   
9. OUT / STANDER (MODELS OS 1000 & OS 2000) The Out/Stander is a prone, upright, and supine stander designed for use by children with lower extremity, neurological, or walking disabilities. The stander enables standing in all three positions, and offers a choice full-body anterior and posterior supports. The stander can also be positioned horizontally to facilitate transfers. Features include a central post with tilt mechanism with a ratchet handle and pin for secure angle adjustments; foot restraint and heel cups with lateral and front-t...[More Information]
   
   
10. PRE-SCHOOL PRONE STANDER (MODEL 106) & CHILD'S PRONE STANDER (MODEL 104) The Pre-School Prone Stander, model 106, and the Child's Prone Stander, model 104, are prone boards with casters designed for use by children with neurological or balance disabilities. These standers are designed to be supported against a sturdy table or counter. The units are adjustable to vary the angle from horizontal and adjustable table/counter rests allow positioning at different distances supporting surfaces. The units latch to the supporting surface with cord, hook, and eye screws for s...[More Information]
    
    
11. PRONE STANDER The Prone Stander is designed for children who require support while standing and wh require changes in position and angle. FRAME: The lightweight aluminum frame has heavy-duty locking casters and adjusts from almost horizontal (40 degrees) to amost horizontal (70 degrees). SUPPORTS: Soft foam upper torso support with adjustable side supports; an adjustable knee board; a knee abductor; and back, leg, and buttocks straps with D-ring closure. UPHOLSTERY: Water-resistant nylon. FOOT BOARD: Multi-ad...[More Information]
    
    
12. PRONE STANDER Chromed tubular steel frame with movable support areas, adjustable height and angle of incline. Padded areas support the trunk and knees. Plastic shoe holders attach to wooden footrest with velcro. Pivoting front support leg permits adjustment of angle of incline. Straps across hips and chest provide support. Accessories: pommel, abduction wedge, foot blocks or wedges to accommodate leg length discrepancy or tight heel cords, removable tray, lateral trunk and hip supports, toy bar. Available to ...[More Information]
    
    
13. PRONE STANDER (MODEL 130) The 130 Prone Stander can also be used as a supine stander. It has an X-shaped chrome steel base and a flat torso support with adjustable laterals, pads, knee blocks and footplates. The stander also has adjustable velcro belts. An optional tray is available. DIMENSIONS: Base is 36 x 36 inches; stander is height adjustable from 20 to 40 inches, and angle adjustable from 85 to 180 degrees. Transport size is 12 x 36 x 36 inches. WEIGHT: 20 pounds without tray; 24 pounds with tray....[More Information]
    
    
14. PRONE STANDER. Prone stander can be adjusted in height from 50 cm to 175 cm. Its base can be widened an extra 30 cm for increased stability. The height and width of the lateral supports, as well as adjustable hip and knee supports. The footrest mechanism permits individual adjustment of the feet for better distribution of pressure. The unit is equipped with four individually locking casters. Tray can be equipped with elbow pads. No dimensions provided....[More Information]
    
    
15. PRONE STANDERS WITH DESK (MODELS 102, 103, & 107) The Prone Standers with Desk, models 102, 103 and 107, are designed for use by children and adults with mobility and neurological disabilities. Models 102 and 103 are designed for children 18 months to 11 years of age, up to 58 inches tall; Model 107 is designed for users from years of age to adult, or from 48 to 71 inches tall. FRAME: Wooden with an extended base for near vertical positioning, adjustable angle varies 40 to 80 degrees from horizontal. The base has 4-inch swivel locking casters (...[More Information]
    
    
16. PRONE SUPPORT WALKERS (MODELS 3A to 3E) The Prone Support Walkers, models 3A through 3E, are ergonomically designed prone standers and walkers for children and adults. These mobility orthoses are made of institutional grade materials including a sturdy frame with steel legs, an oak tie bar, 4 indoor outdoor enclosed urethane casters, and a Plastazote cushioned upper trunk support. The saddle and chest support adjust to angles from 90 to 45 degrees and are designed to encourage various amounts of independent upright weight bearing acro...[More Information]
    
    
17. Prone Standing Frame Candidate for Batch Producers, Do-it-Yourselfers. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Stander to hold a child in an upright position and provide a play tray; or can be reconfigured to make a chair with a tray. Stander or seat for a very young child. Made of wood with an adjustable foot board and removable tray for toys or activities. A wide foam pad goes around the child's front and sides, and there is a wide strap to keep the child upright. The device can also be used as a chair by putting the footboard at seat height and moving th...[More Information]
    
    
18. RIFTON PRONE STANDER LARGE (E950) The Rifton Prone Stander Large, model 950, is a prone stander designed to accommodate children and adults 52 to 72 inches tall with mobility or neurological disabilities. The stander includes a padded trunk board on a mobile frame with four locking casters, trunk laterals, hip strap, and an adjustable footboard. A hand-crank tilts the board from vertical to horizontal and the board can be secured at any angle. The removable, padded support blocks adjust to any position along the length of the bo...[More Information]
    
    
19. RIFTON PRONE STANDER MEDIUM (MODEL E940) The Rifton Prone Stander Medium, model E940, is a prone stander designed to accommodate children and adults 44 to 59 inches tall with mobility or neurological disabilities. The stander includes a padded trunk board on a mobile frame with four locking casters, trunk laterals, hip strap, and an adjustable footboard. A hand-crank tilts the board from vertical to horizontal and the board can be secured at any angle. The removable, padded support blocks adjust to any position along the length of the ...[More Information]
    
    
20. RIFTON PRONE STANDER SMALL (MODEL E930) The Rifton Prone Stander Small. model E930, is designed to accommodate children with mobility or neurological disabilities 25 to 48 inches tsll. The stander includes a padded trunk board on a mobile frame with four locking casters, trunk laterals, hip strap, and an adjustable footboard. A hand-crank tilts the board from vertical to horizontal and the board can be secured at any angle. The removable, padded support blocks adjust to any position along the length of the board. The casters are non-m...[More Information]
    
    
21. SAMMONS PRESTON TUGS PEDIATRIC PRONE STANDER (MODEL 4617A) The Sammons Preston Tugs Pediatric Prone Stander, model 4617A, is a prone and supine stander designed for use by children with mobility disabilities. This stander is designed to keep children 25 to 48 inches tall in a prone position. Features include a fully vertical adjustable mainboard, knee board and footboard. Other features include a hand crank that provides quick and easy angle adjustments and nonslip, removable support pads that move to any position along the length of the board. Interna...[More Information]
    
    
22. STANDING FRAME --- CUSTOM ADAPTATION --- PURPOSE: To provide a child with global developmental delays and low muscle tone with forward-leaning support while standing. This prone stander enables the child to be upright and to develop a tolerance for weight-bearing. Built to a therapist's specifications, the stander provides forward-leaning support and can be adjusted from upright to 30 degrees from vertical. The unit has a square tube steel frame, a wooden trunk support and footplate, fabric-covered foam paddin...[More Information]
    
    
23. STANDING FRAME ADAPTATION OF THE LAZY SQUIRREL --- CUSTOM ADAPTATION --- PURPOSE: To provide a customized standing frame for children unable to stand unaided. A standing frame allows children to be upright, thus assisting with digestion, circulation, and breathing. Children can also bear their own weight, which may assist in developing bone density, limb coordination and strength. The standing frame designed suggested is the “Lazy Squirrel” or “Squirrel” for short. The Squirrel is designed to provide well-supported vertical standing. It has...[More Information]
    
    
24. SUPERSTAND & SUPERSTAND YOUTH The Superstand and Superstand Youth are standing frames designed for use by children with neurological, lower extremity, balance, or mobility disabilities or spinal cord injury. This pediatric standing system supports children in prone, upright, or supine positions. The Superstand fits children from 26 to 48 inches tall and Superstand Youth fits children from 40 to 60 inches tall. Each unit comes with a headrest, chin rest, knee and foot support, and a rolling base with four 3-inch casters. The ...[More Information]
    
    
25. THERADAPT MINI-PRONE STANDER The TherAdapt Mini-Prone Stander is designed to provide early intervention aged children with appropriate support for weight bearing and anti-gravity orientation. The unit is free-standing and adjusts in 10 degree increments from 10 to 30 degrees back from vertical. The rounded chest plate with trunk pad, measured from the foot plate, is height adjustable from 20 to 26 inches. The padded knee bar adjusts from 5.5 to 10 inches. The stander has two separate 1-inch hook and loop adjustable pelvis ...[More Information]
    
    

Page 1 of 2    Next page »