Products are listed alphabetically.

Page 1 of 1

1. CHILDRENS POWER RECLINER --- DISCONTINUED. (Verified 8/2001) RETAINED IN DATABASE FOR REFERENCE. --- Powered reclining system for 12 and 14 inch power chairs. Compatible with Everest and Jennings and Invacare. Unit includes upholstery, leg rests, mounting hardware, and recliner. May be easily changed to other compatible chairs as child grows. Special options available include: headrest, laptray, solid seat and back, arm channels, calf supports....[More Information]
   
   
2. ELECTRIC RECLINING ATTACHMENT FOR WHEELCHAIRS INCLUDING ELEVATING GURNEY AND SEATLIFT COMBINATION. --- DISCONTINUED. (Verified 2/2004) RETAINED IN DATABASE FOR REFERENCE. --- Powered reclining wheelchair stretcher. Insert replaces seat and back upholstery on standard wheelchair. High upholstered back, padded seat and solid padded legrest. Reclines seat to fully horizontal, and elevates in horizontal or upright position up to 32 inches high. Attached transfer slide plate allows person to roll or slide down to bed when unit is in horizontal position. Battery operated, activated by flipping a sw...[More Information]
   
   
3. FOLIO SPEED CONTROLLER FOR RECLINER ACTUATOR MOTORS --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- Speed controller allows for adjustment of recliner speed in Folio recliner systems. Speed controller reduces actuator speed from one to one hundred percent....[More Information]
   
   
4. FORTRESS RECLINER SYSTEM (MODEL S580) --- DISCONTINUED. (Verified 6/96) RETAINED IN DATABASE FOR REFERENCE. --- Powered reclining seating system. Installs on Fortress 655FS powered wheelchair base. Seat height 20.5 inches from floor. Seat width, 14, 16 or 18 inches. Seat depth, 11 1/2 or 16 inches. 23 1/2 inch back height. Seat options include, sling upholstery, foam cushion, custom molded cushions or commercial cushions. Backrest options include sling upholstery, foam cushion or custom molded. Unit reclines 90 degrees from a vertic...[More Information]
   
   
5. LOW SHEAR POWER RECLINER SYSTEM 50 --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- Low shear reclining back for power wheelchair. Available in 16, 18, or 20 inch widths. Standard features include swingaway elevating legrests, chrome plating. Fits on Everest & Jennings Marathon, Invacare Arrow, and Ranger reclining frame power wheelchairs. Toggle switch control or can be integrated to electronic wheelchair control. Optional equipment: headrest, reclining armrests, arm and calf troughs, rigidizing frame, ...[More Information]
   
   
6. PATIENT OPERATED RECLINING ATTACHMENT FOR WHEELCHAIR. --- DISCONTINUED. (Verified 2/2004) RETAINED IN DATABASE FOR REFERENCE. --- Powered reclining back for wheelchairs, tubular frame and vinyl seat, back and footrest unit are attached to wheelchair with screws in place of standard seat and back upholstery. Manual model has left or right handwheel allows independent control reclines about 50 degrees. Electrically operated model, battery operated with rechargeable gel cell, two way momentary switch activates recliner. Seat widths: 12, 14, 16 or 18 i...[More Information]
   
   
7. POWER MECHANICAL RECLINER (MODEL TCS-14450) --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Kit to convert standard manually reclining back on Everest and Jennings Marathon power wheelchair to power recliner using standard backpost assembly. Can be used with standard seat and back upholstery or ordered with solid seat base and/or contoured back. 24 volt linear actuator powers back and elevating legrests. Leglifts are tied into system with ball detent pin for easy removal. Recliner controller and switches ordere...[More Information]
   
   
8. POWER RECLINER --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- Add on powered reclining back for wheelchairs. Footrest automatically raises as back reclines. Can be stopped at any angle. Standard toggle switch provided. Optional unidirectional switch for head shoulder or other operating positions. For use with 12 or 24 volt powered wheelchairs....[More Information]
   
   
9. POWER RECLINING WHEELCHAIR SYSTEM (MODEL TCS-14800) --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Power reclining back using PVA "No Shear" hinge design. 24 volt linear actuator powers back and elevating legrests. Available for Everest and Jennings and Invacare reclining power wheelchairs in 16 and 18 inch widths. Back height from 18 to 26 inches. Easily locking and removeable legrest links with optional height and motion delay for elevating legrests. Standard seat and back upholstery can be used, or can be ordered w...[More Information]
   
   
10. POWERED RECLINER (MODELS 8381-AR, 8381-A, 8381-B) --- DISCONTINUED (Verified 8/2001) RETAINED IN DATABASE FOR REFERENCE. --- Falcon add on power recline systems operate through Falcon's zero pressure contacts, MED breath control system, or toggle switch. Available with swing away chin control. Added to Everest and Jennings or Invacare power drive chairs with full reclining or nonreclining frame. Options include Rugg mechanism or sliding seat, self elevating headrest, reclining arms, high torque actuator, low back, limit switches for positive po...[More Information]
    
    
11. POWERED RECLINING BACK. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Powered reclining back. Reclines and raises back automatically. Unit does not change overall length of wheelchair. Contact company for type of controls available for system operation. Developed for needs of C-1 through C-5 quadriplegic. Can be combined with powered elevating legrests....[More Information]
    
    
12. TARSYS 4XP TILT SYSTEM --- DISCONTINUED. (Verified 5/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Tarsys 4XP Tilt System is a powered tilt system designed to provide a cost effective pressure relief and postural benefits for persons with neuro-muscular disabilities or spinal cord injuries. The system is compatible with most hemi, recliner, and shortwheel conventional chairs. With a 45 degree range of tilt, the system features low seat heights for accessibility to tables and desks, an optional relay control for in...[More Information]
    
    
13. TARSYS TILT & RECLINE SYSTEMS --- DISCONTINUED. (Verified 5/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Tarsys Tilt and Recline Systems are powered reclining and tilt systems designed to address the functional and physiological needs for persons with neuro-muscular disabilities and spinal cord injuries. The systems (models for P300, Arrow XT/4M/5M, Xcaliber) are designed to offer the greatest amount of pressure redistribution with full recline and 45 degrees of tilt. They are integrated with the wheelchair to provide l...[More Information]
    
    
14. ZERO SHEAR POWER RECLINER FOR POWER BASE WHEELCHAIR (SYSTEM 100) --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- Zero shear reclining back for power base wheelchair. Reclining system has approximately 5 1/2 inches of zero shear movement. Available in 16, 18, 20 inch or custom widths. Swingaway elevating legrests and chrome plating standard. Recliner fits on any power base wheelchair. Toggle switch control or can be integrated to electronic wheelchair control. Standard equipment: headrest, reclining armrests, arm and calf troughs. Op...[More Information]
    
    
15. ZERO SHEAR POWER RECLINER FOR POWER WHEELCHAIR (SYSTEM 70) --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- Zero shear reclining back for power wheelchair. This reclining system has approximately 5 1/2 inches of zero shear movement. Available in 16, 18, or 20 inch widths. Swingaway elevating legrests and chrome plating standard. Fits on Everest & Jennings Marathon, Invacare Arrow, and Ranger reclining frame power wheelchairs. Toggle switch control or can be integrated to electronic wheelchair control. Headrest, reclining armres...[More Information]
    
    

Page 1 of 1