Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu
Skip to Quick Links

Powered Wheelchair Alternative

Products are listed alphabetically.

Page 1 of 1

  1. BEAMER PERSONAL TRANSPORT VEHICLE Picture of BEAMER PERSONAL TRANSPORT VEHICLE The Beamer Personal Transport Vehicle is a powered wheelchair alternative designed for use by individuals with lower extremity disabilities or people who lack stamina. The Beamer is an electric transportation device on which the user stands when in motion. 500 watt motors in the hub of each of the two front wheels power this device. It has a horn, brake light, turn signals, and tail light. The vehicle has two back wheels for added stability, reinforced steel rider platform with high-impact plas...[More Information]

  2. BOBCAT 3 WHEEL COMPACT SCOOTER (MODELS S38600 & S38601) Picture of BOBCAT 3 WHEEL COMPACT SCOOTER (MODELS S38600 & S38601) The Bobcat 3 Wheel Compact Scooter, models S38600 and S38601, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 38 x 19 x 38.5 inches. The turning radius is 32.2 inches. It has front 2-inch anti-tip wheels and a front large carry basket. The scooter can be disassembled into four pieces for transport, and the tiller folds down for stor...[More Information]

  3. BOBCAT 4 WHEEL COMPACT SCOOTER (MODELS S38650 & S38651) Picture of BOBCAT 4 WHEEL COMPACT SCOOTER (MODELS S38650 & S38651) The Bobcat 4 Wheel Compact Scooter, models S38650 and S38651, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 37 x 19 x 35.5 inches. The turning radius is 35.4 inches. It has 2-inch anti-tip wheels and a front large carry basket. The scooter can be disassembled into 4 pieces. The base is available in red (model S38650) and blue (S386...[More Information]

  4. CARRIER WHEELCHAIR -------- PROTOTYPE --------- PURPOSE: To develop a prototype robotic wheelchair which allows individuals with mobility disabilities and wheelchair users greater independence and the capacity to traverse any terrain and situation. Developed as semester project at the University of Applied Arts in the Studio Industrial Design 2 Esslinger (www.creativednaaustria.com). The CARRIER wheelchair’s frame is specifically shaped to maneuver over a commode and adapted with a “trap door” allowing the user t...[More Information]

  5. CHILD'S VEHICLE The Child's Vehicle is a powered cart designed to be an electric toy vehicle for children with poor dexterity and motor ability. The cart is a standard electric child's vehicle with a modified joystick control and a backrest. The joystick has a plastic plate mounted on top and four plastic discs mounted on each corner. The modified joystick allows the vehicle to be controlled with simple palm and forearm movement. This battery powered vehicle has two motors, six wheels, and is chain driven. PROT...[More Information]

  6. CUSTOM MOTORIZED TRIKES Picture of CUSTOM MOTORIZED TRIKES Custom Motorized Trikes are powered adult tricycles designed for use by individuals with mobility or lower extremity disabilities. Motorcycles and sidecars are custom converted to motorized tricycles with hand controls that eliminate shifting with the left foot. Honda and Harley Davidson models can be converted using Motor Trike conversion kits. OPTIONS: Kliktronic electronic shifter; Champion reverse gears; Champion EZ-Steer; trailer hitch dock....[More Information]

  7. CUSTOMIZED ELECTRONIC STROLLER -------- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized electronic wheelchair (herein referred to as stroller) for a 10-year-old boy who has spinal muscular atrophy. Due to the nature of his condition, the child prefers to remain horizontally positioned, and the stroller design accommodated that. The electronic stroller can be manually pushed or controlled electronically. The user interface for the electronic controls includes a single touch button that the user can press whenev...[More Information]

  8. DANE WHEELCHAIR MOVER The WheelChair Mover uses a simple hand lever design that activates secure hitching to the frame of the wheelchair. The ergonomic design of the machine allows the user to control the speed with easy and controlled throttle acceleration. With the unit securing the frame at a low center of gravity, turning the wheelchair in a circle is smooth and effortless. Compact and quiet, the Dane WheelChair Mover is the ideal device to fit within hospital rooms and halls while meeting the objectives of safe ...[More Information]

  9. DAYTONA 3 GT (MODELS S35005GT & S35006GT) Picture of DAYTONA 3 GT (MODELS S35005GT & S35006GT) The Daytona 3 GT, models S35005GT and S35006GT, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 47.4 x 22.8 x 40 inches. The ground clearance is 2.5 inches, and the turning radius is 40.2 inches. The unit includes rear anti-tip wheels, a headlight, a tail light, a front large carry basket, and a front bumper. The scooter can be disa...[More Information]

  10. DAYTONA 4 GT (MODELS S4501GT & S4502GT) Picture of DAYTONA 4 GT (MODELS S4501GT & S4502GT) The Daytona 4 GT, models S45001GT and S45002GT, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 49.6 x 22.8 x 44 inches. The ground clearance is 3 inches, and the turning radius is 64 inches. This scooter includes rear anti-tip wheels, two headlights, a tail light, a front large carry basket, and a front bumper. It has anti-tippers. ...[More Information]

  11. EZ-SHOPPER 8000 Picture of EZ-SHOPPER 8000 The EZ-Shopper 8000 is a four-wheeled scooter designed for use by retail customers with mobility, walking or lower extremity disabilities or spinal cord injury. This model is designed for use in grocery stores and other retail establishments with wider aisles. FRAME (HxLxW): 38 x 55 x 26 inches. The scooter has a heavy duty 1.25-inch steel frame with shock-absorbing and dent-resistant decks. The rear deck flips up to access motor and batteries. It has a reinforced tiller column with an added bra...[More Information]

  12. GO-BOT Picture of GO-BOT The Go-Bot is a powered cart designed to provide mobility and independence for children with mobility disabilities. Designed for children as young as 12 months of age to children up to 43 inches tall, this device can also be used as a transitional aid to train for powered wheelchair use. The device is designed for indoor use or outdoor use on level surfaces and consists of a powered mobility base with a combination positioning seat/standing aid in the center which enables the child to operate th...[More Information]

  13. GO-KART Picture of GO-KART The Go-Kart is a powered cart designed for use by children or adults with lower extremity, mobility, neurological, or severe physical disabilities. FRAME (LxW): Seat on a yellow platform measuring 65 x 37.5 inches. The cart can operate on gravel, grass, and hard surfaces, with a ground clearance of 4 inches and a turning radius of 10 feet. CONTROLS: Joystick or switch control. UPHOLSTERY: Blue. BRAKES: Electric. WHEELS: 12-inch diameter pneumatic tires. FOOTRESTS: The user's feet rest on the fr...[More Information]

  14. LE JOURNEYMAN Picture of LE JOURNEYMAN The LE Journeyman is a powered wheelchair alternative for indoor and all-terrain outdoor use by people who have mobility disabilities or spinal cord injury. It is designed for all weather use and can be used in up to 10 inches of water. FRAME (LxW): 25-36 x 42-48 inches. Each Journeyman is custom made to the specifications of the user. CONTROLS: The Journeyman utilizes a 200-amp controller with a T-shaped tiller for one- or two-handed steering. AWD: The Journeyman has an independent 1-horsepower...[More Information]

  15. MAGIC CARPET Picture of MAGIC CARPET -------- PROTOTYPE --------- PURPOSE: To design a prototype of a moving platform for pre-school aged children with mobility disabilities and/or lower limb disabilities to move around and navigate their environment. Created by designers at the Polytechnic University, Magic Carpet allows young children with mobility or lower limb disabilities to experience moving independently while learning and practicing the skills necessary for to maneuver a power wheelchair. The Magic Carpet consists of a carp...[More Information]

  16. MERRY STAND BY ME CART Picture of MERRY STAND BY ME CART The Merry Stand By Me Cart is a carrying cart for a standing frame designed for use by individuals with mobility, walking and standing disabilities who use the Merry Stand By Me (see separate entry) standing frame. Designed to add portability to the Merry Stand By Me, this carrying cart can hold and transport the standing frame once it is taken apart. The cart is constructed with black tubular steel, and it has two pairs of brackets, one on each side, as well as four castor wheels. COLOR: Black...[More Information]

  17. MICRO BUGGY Picture of MICRO BUGGY ---PROTOTYPE--- The Micro Buggy is an off-road wheelchair designed for use by individuals with lower extremity or mobility disabilities. This gas powered wheelchair can be used for recreation or for tasks such as walking the dog. FRAME: Adjustable suspension; automatic transmission; 3 forward gears and 1 reverse gear; 1.5 inch receiver hitch in front and rear; 8 inch suspension travel; expandable storage system that slip links storage baskets. CONTROLS: The unit is all hand controlled, with a th...[More Information]

  18. MINI GO-BOT Picture of MINI GO-BOT The Go-Bot is a powered cart designed to provide mobility and independence for children with mobility disabilities. Designed for children ages one to eight and up to 36 inches tall, this device can also be used as a transitional aid to train for powered wheelchair use. The device is designed for indoor use or outdoor use on level surfaces and consists of an ABS plastic body, a supine standing frame, and a powered mobility base with a combination positioning seat/standing aid in the center which ...[More Information]

  19. MOTIVE MOTORIZED WHEELCHAIR KIT -------- PROTOTYPE --------- PURPOSE: To create a prototype of a motorized wheelchair powered by gasoline that can be used by individuals with mobility disabilities to participate in off-road activities such as hunting and fishing. This prototype uses a small motorcycle engine and the chair is capable of reaching speeds up to 25 miles per hour and geared to handle hills. A do-it-yourself kit is expected to be available through Motive Transportation in January 2010. The kit uses an engine almost ...[More Information]

  20. NON-POWERED WHEELS TO POWERED -------- PROTOTYPE --------- PURPOSE: To create a prototype of an attachable device which converts a non-motorized wheelchair into a motorized wheelchair similar to wheelchair design used by the pop-culture comic book icon of Professor Xavier form the X-Men franchise. Created by Ju Hyun Lee from Yanko Design the device attaches to any standard wheelchair providing instant motorized power. This device has potential uses for hospitals, nursing homes, physical therapy centers, and for the average w...[More Information]

  21. ODYSSEY (MODELS S45200 & S45300) Picture of ODYSSEY (MODELS S45200 & S45300) The Odyssey, models S45200 and S45300, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 55.1 x 26.4 x 39.8 inches. The ground clearance is 4.5 inches, and the turning radius is 70 inches. This scooter includes rear anti-tip wheels, heavy-duty front and rear bumpers, a front large carry basket, front and rear lights with tur...[More Information]

  22. OSPREY 4410 4-WHEEL HEAVY DUTY SCOOTER (MODELS OSPREY4410MG20CS & OSPREY4410MG22CS) Picture of OSPREY 4410 4-WHEEL HEAVY DUTY SCOOTER (MODELS OSPREY4410MG20CS & OSPREY4410MG22CS) The Osprey 4410 4-Wheel Heavy Duty Scooter, models OSPREY4410MG20CS and OSPREY4410MG22CS, is a heavy-duty four-wheel scooter designed for outdoor use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 54 x 29 x 50 inches. The ground clearance is 7 inches, and the turning radius is 73 inches. This scooter includes a headlight, a horn, turn signals, dual rear view mirrors, a front plastic basket, and...[More Information]

  23. PACESAVER FUSION250 & PACESAVER FUSION350 Picture of PACESAVER FUSION250 & PACESAVER FUSION350 The PaceSaver Fusion250 and Fusion350 are three-wheeled scooters designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 22 inches (Fusion250) or 45.5 x 23.5 inches (Fusion350), and both models have a 2-inch ground clearance. The turning radius is 29.5 inches for both models. The scooters disassemble for transport, and they are available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. T...[More Information]

  24. PACESAVER FUSION450 & PACESAVER FUSION500 Picture of PACESAVER FUSION450 & PACESAVER FUSION500 The PaceSaver Fusion450 and Fusion500 are three-wheeled scooters designed for indoor or outdoor use by large individuals with mobility disabilities. FRAME (LxW): 48 x 24 inches, and both models have a 2-inch ground clearance. The turning radius is 33.25 inches for both models. Both models disassemble for transport, and they are available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The control box includes a battery-level in...[More Information]

  25. PACESAVER PLUS III JR. 9-INCH AND 10-INCH Picture of PACESAVER PLUS III JR. 9-INCH AND 10-INCH The PaceSaver Plus III Jr. is a three-wheeled scooter designed for indoor or outdoor by individuals with mobility disabilities. FRAME (LxW): 42 x 24 (10-inch) or 23 inches (9-inch) with a 4.5-inch (10-inch) or 4-inch (9-inch) ground clearance and a 32-inch turning radius. The wheel base is 30 inches. The scooter disassembles for transport. It is available in candy apple red. CONTROLS: This scooter features a dual moisture protected Snag Guard throttle and 110 amp power boost battery saver contr...[More Information]

  26. PERMOVEH (Personal Mobile Vehicle) Picture of PERMOVEH (Personal Mobile Vehicle) -------- PROTOTYPE --------- PURPOSE: To create a prototype of a personal mobility vehicle for individuals with lower extremity or mobility disabilities or spinal cord injury. The Permoveh (from Personal Mobile Vehicle) is a powered wheelchair alternative developed by Komori Masaharu, an associate professor from Kyoto University. The Permoveh uses a wheel-in-wheel system that allows the vehicle to travel diagonally and laterally with no need for turning space. The prototype allows wheelchair use...[More Information]

  27. PHOENIX 3 WHEEL COMPACT SCOOTER (MODEL S35010) Picture of PHOENIX 3 WHEEL COMPACT SCOOTER (MODEL S35010) The Phoenix 3 Wheel Compact Scooter, model S35010, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight and a front large carry basket. FRAME (LxWxH): The overall dimensions are 37.8 x 18.9 x 34.6 inches. The ground clearance is 2 inches and the turning radius is 32.3 inches. It has rear 2-inch anti-tippers. The scooter can be disassembled into four...[More Information]

  28. PHOENIX 4 WHEEL COMPACT SCOOTER (MODEL S35015) Picture of PHOENIX 4 WHEEL COMPACT SCOOTER (MODEL S35015) The Phoenix 4 Wheel Compact Scooter, model S35015, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. This scooter includes a headlight and a large carry basket. FRAME (LxW): The overall dimensions are 37.8 x 20 inches. The ground clearance is 2 inches, and the turning radius is 44 inches. It has 2-inch rear anti-tip wheels. The scooter can be disassembled into 4 pieces for sto...[More Information]

  29. PHOENIX HD3 Picture of PHOENIX HD3 The Phoenix HD3 is a heavy-duty three-wheel scooter designed for use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight and a large front carry basket. FRAME: The scooter can be disassembled into 4 pieces for transport. It has rear anti-tip wheels and a plastic basket and headlight on the front of the tiller. Two sets of interchangeable color accent panels, in red and blue, are included. CONTROLS: Electronic c...[More Information]

  30. PHOENIX HD4 Picture of PHOENIX HD4 The Phoenix HD4 is a heavy-duty four-wheel scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME: This scooter includes a headlight and a large front carry basket mounted on the tiller and rear anti-tip wheels.The scooter can be disassembled into 4 pieces for transport. Two sets of interchangeable color panels in red and blue are included. CONTROLS: Electric controller mounted on an adjustab...[More Information]

  31. PILOT 2310 3-WHEEL MEDIUM SIZE SCOOTER (MODELS PILOT2310BL18CS, PILOT2310BG18CS, PILOT2310BL20CS & PILOT2310BG20CS) Picture of PILOT 2310 3-WHEEL MEDIUM SIZE SCOOTER (MODELS PILOT2310BL18CS, PILOT2310BG18CS, PILOT2310BL20CS & PILOT2310BG20CS) The Pilot 2310 3-Wheel Medium Size Scooter, models PILOT2310BL18CS, PILOT2310BG18CS, PILOT2310BL20CS and PILOT2310BG20CS, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a horn, turn signals, dual rear view mirrors, a front bumper, and a front basket. FRAME (LxWxH): The overall dimensions are 47 x 22 x 38 inches. The ground clearance is 3 inch...[More Information]

  32. PILOT 2410 4-WHEEL MEDIUM SIZE SCOOTER (MODELS PILOT2410BL18CS, PILOT2410BG18CS, PILOT2410BL20CS, & PILOT2410BG20CS) Picture of PILOT 2410 4-WHEEL MEDIUM SIZE SCOOTER (MODELS PILOT2410BL18CS, PILOT2410BG18CS, PILOT2410BL20CS, & PILOT2410BG20CS) The Pilot 2410 4-Wheel Medium Size Scooter, models PILOT2410BL18CS, PILOT2410BG18CS, PILOT2410BL20CS and PILOT2410BG20CS, is a four-wheel scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWXH): The overall dimensions are 47 x 22 x 38 inches. The ground clearance is 3 inches, and the turning radius is 54 inches. This scooter includes rear anti-tip wheels, a headlight, a horn, turn signa...[More Information]

  33. PROWLER 3310 3-WHEEL FULL SIZE SCOOTER (MODELS PROWLER3310MG20CS & PROWLER3310MG22CS) Picture of PROWLER 3310 3-WHEEL FULL SIZE SCOOTER (MODELS PROWLER3310MG20CS & PROWLER3310MG22CS) The Prowler 3310 3-Wheel Full Size Scooter, models PROWLER3310MG20CS and PROWLER3310MG22CS, is a heavy-duty three-wheeled scooter designed for outdoor use by large or obese individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a horn, turn signals, dual rear view mirrors, a front bumper, and a front basket. FRAME (LxWxH): The overall dimensions are 51 x 26 x 49 inches. The ground clearance is 5 inches, and the tu...[More Information]

  34. PROWLER 3410 4-WHEEL FULL SIZE SCOOTER (MODELS PROWLER3410MG20CS & PROWLER3410MG22CS) Picture of PROWLER 3410 4-WHEEL FULL SIZE SCOOTER (MODELS PROWLER3410MG20CS & PROWLER3410MG22CS) The Prowler 3410 4-Wheel Full Size Scooter, models PROWLER3410MG20CS & PROWLER3410MG22CS, is a heavy-duty four-wheeled scooter designed for outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 51 x 26 x 49 inches. The ground clearance is 5 inches, and the turning radius is 70 inches. This scooter includes rear anti-tip wheels, a headlight, a horn, turn signals, dual rear view mirrors, a...[More Information]

  35. REVO 3 WHEEL Picture of REVO 3 WHEEL The Revo is a compact three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a headlight and tail light and an on-board accessory bracket. FRAME(LxW): 43 x 21.5 inches with a 30.5-inch wheel base. The turning radius is 38 inches and the ground clearance is 2.25 inches. The frame disassembles into five parts for transport and is equipped with rear anti-tips. The scooter is available in blue or red. CONTROLS: Adjustable tiller with fingertip...[More Information]

  36. REVO 4 WHEEL The Revo 4 Wheel is a compact four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a headlight and tail light and an on-board accessory bracket. FRAME(LxW): 44.75 x 21.5. The turning radius is 50 inches and the ground clearance is 2.25 inches. The frame disassembles into five parts for transport and is equipped with rear anti-tips. The scooter is available in blue or red. CONTROLS: Adjustable tiller with fingertip controls. RWD: 24-volt d...[More Information]

  37. ROBOTIC WHEELCHAIR Picture of ROBOTIC WHEELCHAIR -------- PROTOTYPE --------- PURPOSE: To design a prototype of a robotic wheelchair to assist aging individuals and those with mobility disabilities in to move about while out shopping in public. Researchers at ATR Intelligent Robotics and Communication Laboratories as part of their Ubiquitous Network Robot (UNR) project have created a prototype of a robotic wheelchair that relies on innovative platforms such global positioning system (GPS) navigation, sensor networks, and mobile devices to have...[More Information]

  38. RODEM "SCI-FI" WHEELCHAIR -------- PROTOTYPE --------- PURPOSE: To create a prototype of a electric wheelchair that resembles a scooter to offer greater mobility to individuals with mobility disabilities (i.e. wheelchair users, etc.). Created by robotics and medical experts in Japan, the four-wheeled Rodem allows users to ride astride, compared a conventional sitting wheelchair. The user can steer with a joystick, hold onto motorbike-style handles while the knees and chest rest on cushions. This design allows user to e...[More Information]

  39. SELF-NAVIGATING WHEELCHAIR -------- PROTOTYPE --------- PURPOSE: To create a prototype of a self-navigating wheelchair for individuals with disabilities. MIT researchers have been working on a self-navigating wheelchair prototype that can learn the geography around it through simple voice commands, and then travel around using the map created within its computer brain. The self-navigating wheelchair relies on a WiFi system to make its maps and then navigate through them, and requires setting up a network of WiFi nodes aro...[More Information]

  40. SHOPRIDER SCOOTIE Picture of SHOPRIDER SCOOTIE The Shoprider Scootie is a four-wheeled scooter designed for use by an individual with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 37 to 40 x 17 x 19 to 34 inches. The ground clearance is 2 inches. The scooter is available in red, yellow, or blue and disassembles without tools for transport and storage. CONTROLS: Controls are mounted on a folding and locking tiller. A horn is also located on the tiller. RWD: Rear-wheel drive...[More Information]

  41. SHOPRIDER SPRINTER 2-SEATER (MODEL 889-4DXD) Picture of SHOPRIDER SPRINTER 2-SEATER (MODEL 889-4DXD) The Shopper Sprinter 2-Seater, model 889-4DXD, is a heavy-duty four-wheeled scooter designed for outdoor use by an individual with mobility or neurological disabilities, spinal cord injury, or arthritis and a companion. The unit includes dual headlights, turn signals, hazard lights, and a front wicker basket. FRAME (LxWxH): The overall dimensions are 55 x 37 x 40 inches. The ground clearance is 4 inches. The turning radius is 59 inches. The base is available in burgundy red and has an open desi...[More Information]

  42. SHOPRIDER SPRINTER XL3 DELUXE (MODEL 778XL) Picture of SHOPRIDER SPRINTER XL3 DELUXE  (MODEL 778XL) The Shoprider Sprinter XL3 Deluxe, model 778XL, is a heavy-duty three-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a front bumper, and a front wicker basket. FRAME (LxWxH): The overall dimensions are 51 x 28 x 34 to 43 inches. The wheelbase is 45 x 27 inches with a ground clearance of 4 inches. The turning radius is 59 inches. CONTROLS: Controls are mounted on an ad...[More Information]

  43. SHOPRIDER SPRINTER XL4 (MODEL 889-4) The Shoprider Sprinter XL4, model 889-4, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a chrome front bumper, and a large front wicker basket. FRAME (LxWxH): The overall dimensions are 52 x 22.5 x 30 to 41.5 inches. The wheelbase is 34.5 x 19 inches with a ground clearance of 4 inches. The turning radius is 54 inches. The frame disassembles for t...[More Information]

  44. SHOPRIDER SPRINTER XL4 DELUXE (MODEL 889XL) Picture of SHOPRIDER SPRINTER XL4 DELUXE  (MODEL 889XL) The Shoprider Sprinter XL4 Deluxe, model 889-XL, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a deluxe headlight package and a front wicker basket. FRAME (LxWxH): The overall dimensions are 58 x 27 x 34 to 40 inches. The wheelbase is 45 x 27.5 inches with a ground clearance of 3 inches. The turning radius is 59 inches. CONTROLS: Controls are mounted on an ad...[More Information]

  45. SHOPRIDER SUNRUNNER (MODEL 777-3 /4) Picture of SHOPRIDER SUNRUNNER (MODEL 777-3 /4) The Sunrunner, model 777-3/4, is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a front black mesh basket. FRAME (LxWxH): The overall dimensions are 43 to 46 x 22 x 35 inches. The wheelbase is 34 x 18 inches with a ground clearance of 3 inches. The turning radius is 40 inches. The frame disassembles for transport. The scooter is available in burgundy or blue (with five-position tiller)...[More Information]

  46. SHUTTLE The Shuttle is a medium to large all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 46 x 24 inches with a 4.5-inch ground clearance and a turning radius of 36 inches. The base has an open ended design with ample foot space and a continuous heavy steel frame. The body is available in gray or mauve and features full fenders. This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the ...[More Information]

  47. SIDEKICK Picture of SIDEKICK The Sidekick is a small to medium all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 41 x 22 inches with a 3.5-inch ground clearance and a turning radius of 31 inches. The body is available in champagne or gray and features a covered battery area.This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the controls. Custom controls are available. RWD: Sealed transaxle rear wheel driv...[More Information]

  48. SNAZZY 2 (MODEL 777-4WA) The Snazzy 2, model 777-4WA, is a four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The scooter is equipped with rear reflectors and a front mesh basket. FRAME (LxWxH): The overall dimensions are 44 x 21 x 18 to 36.5 inches. The turning radius is 36.5 inches. The scooter is equipped with a front bumper and rear anti-tip wheels. CONTROLS: Finger tip controls are mounted on a single-position tiller....[More Information]

  49. SOLAR-POWERED SCOOTER -------- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adapted power source for a motorized scooter for an individual with mobility and various disabilities. The individual lives in Florida and the uses the scooter for mobility outside of the home. An adapted battery and canopy that uses solar energy provides a piece of mind during electrical outages due to hurricanes and other disasters. To create this adaptation, William Heckenstaller of Gulf City Solar, in Bonita was contacted....[More Information]

  50. SOVEREIGN (MODELS 888-3ES & 888-4ES) The Sovereign is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. These scooters include a front mesh basket. FRAME (LxWxH): The overall dimensions for model 888-3ES are 45.25 x 23 5/8 x 38 to 28.5 inches. The wheelbase is 34 x 21.5 inches with a ground clearance of 3 inches. The turning radius is 37 inches. The overall dimensions for model 888-4ES are 48.5 x 21.5 x 38 to 28 inches with a ground clearance o...[More Information]

  51. SOVEREIGN (MODELS 888B-3 & 888B-4) The Sovereign is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. These scooters include a front wicker basket and a headlight. Model 888B-4 also includes a chrome front bumper. FRAME (LxWxH): The overall dimensions for model 888B-3 are 45.25 x 23 5/8 x 38 to 28.5 inches. The wheelbase is 34 x 21.5 inches with a ground clearance of 3 inches. The turning radius is 37 inches. The overall dimensions for model ...[More Information]

  52. SPITFIRE 1310 3-WHEEL COMPACT SCOOTER (MODELS SPITFIRE1310BL16FS & SPITFIRE1310RD16FS) Picture of SPITFIRE 1310 3-WHEEL COMPACT SCOOTER (MODELS SPITFIRE1310BL16FS & SPITFIRE1310RD16FS) The Spitfire 1310 3-Wheel Compact Scooter, models SPITFIRE1310BL16FS and SPITFIRE1310RD16FS, is a three-wheeled scooter designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 42 x 19 x 36 inches. The ground clearance is 2 inches, and the turning radius is 43 inches. It has anti-tip wheels and a standard plastic front basket. The scooter can be disassembled into 5 pieces for transport...[More Information]

  53. SPITFIRE 1410 4-WHEEL COMPACT SCOOTER (MODELS SPITFIRE1410BL16FS & SPITFIRE1410RD16FS) Picture of SPITFIRE 1410 4-WHEEL COMPACT SCOOTER (MODELS SPITFIRE1410BL16FS & SPITFIRE1410RD16FS) The Spitfire 1410 4-Wheel Compact Scooter, models SPITFIRE1410BL16FS and SPITFIRE1410RD16FS, is a four-wheel scooter designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 43 x 19 x 36 inches. The ground clearance is 2 inches, and the turning radius is 47 inches. It has anti-tip wheels and a standard plastic front basket. The scooter can be disassembled into 5 pieces for transport or...[More Information]

  54. SPITFIRE EX 1320 3 WHEEL COMPACT SIZE SCOOTER (MODELS SPITFIRE132016FS12 & SPITFIRE132016FS21) Picture of SPITFIRE EX 1320 3 WHEEL COMPACT SIZE SCOOTER (MODELS SPITFIRE132016FS12 & SPITFIRE132016FS21) The Spitfire EX 1320 3 Wheel Compact Size Scooter, models SPITFIRE132016FS12 and SPITFIRE132016FS21, is a three-wheel scooter designed for use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 41 x 19 x 36 inches. The ground clearance is 3 inches, and the turning radius is 46 inches. It has rear anti-tip wheels and a standard plastic basket attached to the front of the tiller. The scooter can be d...[More Information]

  55. SPITFIRE EX 1420 4-WHEEL COMPACT SCOOTER (MODELS SPITFIRE142016FS21 & SPITFIRE142016FS12) Picture of SPITFIRE EX 1420 4-WHEEL COMPACT SCOOTER (MODELS SPITFIRE142016FS21 & SPITFIRE142016FS12) The Spitfire EX 1420 4-Wheel Compact Scooter, models SPITFIRE142016FS21 and SPITFIRE142016FS12, is a four-wheeled scooter designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): 42 x 20 x 36 inches. The ground clearance is 3 inches, and the turning radius is 50 inches. It has rear anti-tip wheels and a standard plastic front basket with a removable liner bag. The scooter can be disassembled into 5 pieces for tr...[More Information]

  56. SUPER LIGHT PORTABLE SCOOTER Picture of SUPER LIGHT PORTABLE SCOOTER The Super Light Portable Scooter is designed for use by individuals with mobility disabilities. This unit comes standard with a headlight, a horn, and a rear basket. FRAME: Steel frame disassembles without tools for storage and transport and has a turning radius of 27.5 inches. CONTROLS: Handle mounted electronic controls. FWD: Front wheel drive. SEAT: Height-adjustable 360-degree swivel seat is 18 inches wide. UPHOLSTERY: Vinyl. ARMRESTS: Flip-up armrests. BRAKES: Electromagnetic braking system...[More Information]

  57. SUPERFOURIN WHEELCHAIR Picture of SUPERFOURIN WHEELCHAIR -------- PROTOTYPE --------- PURPOSE: To design a prototype of a “smart” all-terrain wheelchair for individuals with mobility disabilities and/or wheelchair users. This prototype combines the features of a powered wheelchair, dune buggy, and an ATV to create a new GPS-enabled wheelchair with fat tires and four-wheel drive that allows individuals with lower extremity and mobility disabilities or spinal cord injury to navigate almost any terrain. Developed by the Fraunhofer Institute for Informati...[More Information]

  58. TANDEM ELECTRIC WHEELCHAIR Picture of TANDEM ELECTRIC WHEELCHAIR -------- PROTOTYPE --------- PURPOSE: To design a prototype of a simple, fun, and sporty aesthetic electric vehicle for individuals with lower extremity or mobility disabilities, people with spinal cord injury and others who use a wheelchair. After spending an extended period of time in a wheelchair to better understand the challenges of wheelchair users and individuals with disabilities, designer Alexandre Pain, proposed that it was the stigma associated with the wheelchair that appeared to be ...[More Information]

  59. THE FLYER The Flyer is a battery powered scooter designed to disassemble into five lightweight components in 60 seconds or less for persons with mobility disablities and limited hand strength. For this scooter, no tools are need for assembly/disassembly, and the electrical connections are made automatically when re-assembling. It is made of rust-free aluminum and can be stowed in trunks of most cars without the aid of a lifter. The scooter features a single level tiller for maneuvering; a large front bask...[More Information]

  60. TRI-SCOOT Three wheeled powered wheelchair alternative. Overall frame length 42 1/ 2 inches. Overall frame width 19 inches. 18 inch seat width. 16 inch seat depth. Bucket seat swivels 360 degrees. Adjustable seat height from 20 to 24 inches. 16 inch back height. 12 or 24 volt front wheel drive operation. 2 speed or variable speed control. Maximum speed 4 miles per hour. Use of 2 batteries doubles the range from 8 to 16 miles. Maximum weight capacity 180 pounds. Disassembles for transport. Weight not inclu...[More Information]

  61. UNIMO ELECTRIC TREADED WHEELCHAIR Picture of UNIMO ELECTRIC TREADED WHEELCHAIR -------- PROTOTYPE --------- PURPOSE: To create a prototype of an electric wheelchair for hospitals and rehabilitation centers. Nano-Optonics Energy, a Japanese firm has unveiled "Unimo" a single-seat electric vehicle (EV) for hospitals and rehabilitation centers that features a comfortable chair with tank-like rubber treads. While not designed specifically for off-road travel, the treads on the Unimo wheelchair allow it to turn in place making it easier to navigate around hospital corners and i...[More Information]

  62. VICTORY 10 3-WHEEL SCOOTER (MODEL SC610) Picture of VICTORY 10 3-WHEEL SCOOTER (MODEL SC610) The Victory 10 3-Wheel Scooter, model SC610, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.25 x 22.25 inches. The turning radius is 42 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. ...[More Information]

  63. VICTORY 10 4-WHEEL SCOOTER (MODEL SC710) Picture of VICTORY 10 4-WHEEL SCOOTER (MODEL SC710) The Victory 10 4-Wheel Scooter, model SC710, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47x 22.25 inches. The turning radius is 54 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTI...[More Information]

  64. VICTORY 9 3-WHEEL SCOOTER (MODEL SC609) Picture of VICTORY 9 3-WHEEL SCOOTER (MODEL SC609) The Victory 9 3-Wheel Scooter, model SC609, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 43.5 x 22.125 inches. The turning radius is 40.25 inches and the ground clearance is 2 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder;...[More Information]

  65. VICTORY 9 4-WHEEL SCOOTER (MODEL SC709) Picture of VICTORY 9 4-WHEEL SCOOTER (MODEL SC709) The Victory 9 4-Wheel Scooter, model SC709, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.5 x 22.5 inches. The turning radius is 51.5 inches and the ground clearance is 2.25 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering...[More Information]

  66. VICTORY 9 PS 3-WHEEL SCOOTER (MODEL SC609PS) Picture of VICTORY 9 PS 3-WHEEL SCOOTER (MODEL SC609PS) The Victory 9 PS 3-Wheel Scooter, model SC609PS, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 43.5 x 22.125 inches. The turning radius is 41 inches and the ground clearance is 2 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steeri...[More Information]

  67. VOICE-CONTROLLED WHEELCHAIR -------- PROTOTYPE --------- PURPOSE: To create a prototype voice-controlled wheelchair which allows individuals with mobility disabilities and unable to physically maneuver a joystick control to navigate a powered-wheelchair. First, the individual uses the speaker independent mode, the speech software is trained in the use of a few words that will help the user get around. After training, the voice-controlled wheelchair is switched over to voice input mode, and then all the comparison between v...[More Information]

  68. WEEBOT Picture of WEEBOT -------- PROTOTYPE --------- PURPOSE: To design a prototype of a mobility device for babies and young children with physical and mobility disabilities. Researchers and designers at the Ithaca College in Ithaca, NY have designed and developed a prototype device that allows children with physical and mobility disabilities to explore greater independence as part of the Tots on Bots project. They created the WeeBot using a baby seat that is then strapped onto a Wii Fit Balance Board that sits on top...[More Information]

  69. WRANGLER (MODEL PMV 600) Picture of WRANGLER (MODEL PMV 600) The Wrangler (Model PMV 600) is an all-terrain four-wheeled scooter designed specifically for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 63.5 x 31 inches with a turning radius of 77 inches, and ground clearance is 7 inches. This scooter features fenders, an open base, and a covered battery area and is available in viper blue or candy apple red. CONTROLS: Finger-tip controls are located on the adjustable tiller with an on/off key. RWD: Two in-line gear moto...[More Information]

Page 1 of 1

View discontinued Products (149)

AbleData, 103 W. Broad Street, Suite 400, Falls Church, VA 22046. 1-800-227-0216. Se habla español.
Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
by New Editions Consulting under Contract No. ED-OSE-13-C-0064.

The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor New Editions Consulting has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and New Editions Consulting make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or New Editions Consulting.