Products are listed alphabetically.

Page 1 of 3    Next page »

1. ACO DETECTABLE WARNING DEVICE The ACO Detectable Warning Device is a detectable warning surface designed for use by individuals who are blind or have low vision. The polymer concrete surface is made from polyester resins reinforced with mineral aggregates and fillers, with an enhanced micro-texture design located on and between truncated domes for increased slip resistance and sound-on-cane detectability. The surface provides up to four times the compressive strength of cement concrete, with minimal water absorption to preve...[More Information]
   
   
2. ADA COMPLIANT PAVER (MODEL 200) The ADA Compliant Paver, model 200, is a detectable warning surface designed for use by individuals who are blind or have low vision. This paving stone with truncated domes provides visual as well as textural contrast to guide individuals with visual impairments on conventional publicly utilized pavements, sidewalks and other components of the public right of way, including wheelchair curb ramps at street intersections. The unit is made from a concrete mix under extreme pressure and high frequen...[More Information]
   
   
3. ADA DETECTABLE WARNING PAVER The ADA Detectable Warning Paver is a detectable warning surface designed for use on sidewalks, crosswalks and entries to provide tactile warnings to pedestrians who are blind or have low vision. The surface features truncated domes that can be felt underfoot or with a white cane. The paver is manufactured from recycled glass using RG Stone hardface technology. It has an extra dense surface that handles heavy traffic, harsh weathering, salt, and ice removal, and it can be cut, fit, and contoured...[More Information]
   
   
4. ADA PAVER The ADA Paver is a detectable warning surface designed for use by individuals who are blind or have low vision. These dry-pressed paving bricks bear a Braille-like detectable warning surface to help pedestrians with visual impairments anticipate and avoid a hazard ahead. The provision of the detectable warning surface on locations such as curb cuts and the edges of loading docks or elevated or level boarding platforms in transit stations enables most visually impaired persons to come to a stop b...[More Information]
   
   
5. ADVANTAGE SURFACE APPLIED TACTILE WARNING SYSTEM The Advantage Surface Applied Tactile Warning System is a detectable warning surface designed for use by individuals who are blind or have low vision. Made of stainless steel, this tactile warning system has truncated domes that resist snow plow damage during snow and ice removal in cold climates. The surface can be applied to curb ramps, platform edges, and other locations in public rights of way requiring an upgrade to meet ADA (Americans with Disabilities Act) guidelines. DIMENSIONS: 2 x 3 fe...[More Information]
   
   
6. ADVANTAGE TACTILE CAST IN PLACE TILE The Advantage Tactile Cast In Place Tile is a detectable warning surface designed for use by individuals who are blind or have low vision. Made of stainless steel, the surface has truncated domes that are resistant to snow plow damage during winter clearing of snow and ice. This replaceable cast in place tile is installed by setting it directly in newly poured concrete, but can be replaced without demolishing the existing concrete. DIMENSIONS: 2 x 3 feet, 2 x 4 feet, or 2 x 5 feet....[More Information]
   
   
7. ALERTCAST DETECTABLE WARNING TILE The AlertCast Detectable Warning Tile is a detectable warning surface designed to provide tactile warning of danger to pedestrians who are blind or have low vision. Made from glass-reinforced thermoset plastic, it has a top panel molded with truncated domes and bottom docking anchors that are embedded into wet concrete. The anchors lock the unit securely into the concrete without trapping air beneath the surface. The surface is safety-speckled for slip resistance, and the perimeter has a beveled...[More Information]
   
   
8. ALERTMAT DETECTABLE WARNING SYSTEM alertmat Detectable Warning System is a detectable warning surface and non slip outdoor matting designed to provide tactile warning of dangers to pedestrians who are blind or have low vision. This surface-applied detectable warning mat is made from 100 percent recycled styrene butadiene from tires mixed with nylon, rayon and polyester fibers. It has truncated domes and can be used for retrofitting or new installations. It is slip-resistant and has a thin surface profile and perimeter beveled edg...[More Information]
   
   
9. ALERTTILE DETECTABLE WARNING AlertTile Detectable Warning is a detectable warning surface designed for use to provide tactile warning of dangers ahead for pedestrians who are blind or have low vision. Applications include curb ramps and platform edges. Made from a glass reinforced thermoset composite, its semi-rigid composition is flexible enough to conform to ramp irregularities in retrofit applications. The surface has an in-line pattern of truncated domes to provide tactile warnings. The surface is safety-speckled for ad...[More Information]
   
   
10. CAST IN PLACE REPLACEABLE TACTILE WARNING SURFACE TILE The Cast in Place Replaceable Tactile Warning Surface Tile is a detectable warning surface designed to provide warnings of streets and other potentially dangerous areas for individuals who are blind or have low vision. This is a detectable warning surface with truncated domes for use in new curb ramps or new construction. It is installed by being pressed into place in freshly poured concrete. The unit may be replaced by removing the bolts and inserting a new interchangeable unit in the existing ...[More Information]
    
    
11. CAST-DWD CAST-DWD is a detectable warning surface designed for use by individuals who are blind or have low vision. The CAST-DWD panels are made from cast iron, with truncated domes to provide tactile warnings to visually impaired pedestrians. The panels can withstand rigorous conditions such as snow plows, street cleaning machines, and vehicular traffic. Panels are installed directly into wet concrete and held in the concrete by a locking device. The panels have a static coefficient or friction (slip re...[More Information]
    
    
12. CASTINTACT 3 TACTILE WARNING PANEL The CASTinTACT 3 Tactile Warning Panel is a detectable warning surface designed for use by individuals who are blind or have low vision. This cementitious concrete panel is for exterior use at the bottom of curb ramps and other locations where tactile warnings are needed, such as depressed corners, raised crosswalks, raised intersections, borders of medians and islands, the edge of transit platforms, and sidewalks where railroad tracks cross. Panels can be used for both new construction and retr...[More Information]
    
    
13. DETECTABLE WARNING PANEL The Detectable Warning Panel is a detectable warning surface designed for use on pre-cast curb ramps and other locations to provide tactile warnings to pedestrians who are blind or have low vision. The surface comes as cladding for a custom precast concrete unit available in various colors and configurations, with matching custom components. The paver is wet set into fresh concrete and mechanically anchored to the sidewalk to become part of the walking surface. The non slip surface has truncate...[More Information]
    
    
14. DETECTABLE WARNING PLATE The Detectable Warning Plate is a detectable warning surface designed for use by individuals who are blind or have low vision. Made of cast iron, the plate is durable and adheres to concrete without wearing, pealing, cracking or delaminating. The measured coefficient of friction is 0.9. The cast iron material can withstands snow plow abuse. The unit is installed into prepared concrete with reusable lifting springs. Upon exposure to moisture, the unpainted cast iron plates forms a temporary iron...[More Information]
    
    
15. DETECTASHIELD DetectaShield is a detectable warning surface designed for use by individuals who are blind or have low vision. It is composed of panels that can be integrated into paved surfaces to help visually impaired individuals detect intersections by foot or cane. It has high-traction surfaces located on both truncated domes and bands of the panel surface between the rows of domes. The domes' smooth sides increase audibility when a pedestrian's cane strikes the surface. Made from sealed concrete reinforc...[More Information]
    
    
16. DURABAK DETECTABLE WARNING MAT The Durabak Detectable Warning Mat is a detectable warning surface designed for use as a tactile warning system for pedestrians who are blind or have low vision. This suface is designed to be applied to an existing surface to make it compliant with the Americans with Disabilities Act (ADA). It is a permanent single-piece mat with truncated domes, molded in resilient rubber. The mats come pre-coated with 3 coats of Durabak, a slip-resistant, flexible polyurethane safety coating. The bottom of the...[More Information]
    
    
17. DURALAST DETECTABLE WARNING PLATE The DURALAST Detectable Warning Plate is a detectable warning surface designed for use to provide tactile warning of potential danger to pedestrians or transit passengers who are blind or have low vision. This surface-mounted, square or rectangular iron plate has a surface pattern of raised bumps. It is locked in place with underside bolts. DIMENSIONS (LxW): 24 x 18 inches; 24 x 24 inches; or 30 x 24 inches. COLOR: Gray....[More Information]
    
    
18. DURALAST RADIAL DETECTABLE WARNING PLATE The DURALAST Radial Detectable Warning Plate is a detectable warning surface designed for use to provide tactile warning of potential danger to pedestrians who are blind or have low vision. The plate has a radial shape, based on a radius of either 10 or 15 feet, for use in a curb ramp. Its surface has a pattern of raised bumps. This surface-mounted iron plate is locked in place using underside bolts. It is available with no coating or powder coated. DIMENSIONS (LxW): 18.81 x 24 inches. COLOR: Gr...[More Information]
    
    
19. DURATEK Duratek tile is a detectable warning surface designed to provide tactile warning of possible danger to individuals who are blind or have low vision. Applications include curb ramps and pedestrian crossings, transit platforms and bus stops, store entrances, parks and recreational areas, building access areas, and temporary ramps. These heavy duty tiles are pressure molded into rigid, solid plates with tactile surfaces using the preferred truncated dome design. Tiles are lightweight and transport...[More Information]
    
    
20. DURATEK-CI Duratek-CI is a detectable warning surface designed for use to provide warning of potential danger to pedestrians who are blind or have low vision. This detectable warning tile has a solid cast iron plate with a truncated domes design. Applications include curb ramps and pedestrian crossings, transit platforms and bus stops, store entrances, parks and recreational areas, and building access areas. Cast-in-place installation is helped by the tiles slim undercarriage. Fasteners are built into the ...[More Information]
    
    
21. DW DOTS DW Dots is a detectable warning surface designed to provide tactile warning of danger to pedestrians who are blind or have low vision. The surface features a pattern of raised domes that can be felt by a pedestrian. The surface can be installed onsite after the walking surface is installed or cured, or it can be installed offsite in a marble, granite or paver stone prior to a tile installation. It can be installed in any spacing pattern. DW Dots are made with precise tolerances and appearance. D...[More Information]
    
    
22. EZ-SET TILE The EZ Set Tile is a detectable warning surface designed for use to provide tactile warnings of danger to pedestrians who are blind or have low vision. This heavy duty replaceable cast-in-place detectable warning tile is a double-reinforced polymer concrete composite with a stainless steel anchoring system,. It is an all season product that can be used in high wear conditions such as transit platforms or shopping cart areas. The tile installs in concrete, and it has a flat bottom surface to elim...[More Information]
    
    
23. HALL DIVIDER FOR BLIND STUDENTS --- DO IT YOURSELF ENTRY --- PURPOSE: To indicate to blind students and staff in a school hallway that they are moving to the left side of the hall into oncoming students. Apply a colored "tap strip" down the middle of the hall for its entire length. The strip is easily seen by sighted staff, and it returns a distinct sound and feel when tapped by the blind students' canes. TITLE: Hold That Line (in Springboard). AUTHOR: Pfotenhauer, M.. JOURNAL: RE:view. REF: Vol. 36, No. 1, Spring 2004: p. 34....[More Information]
    
    
24. HANOVER DETECTABLE WARNING PAVER The Hanover Detectable Warning Paver is a detectable warning surface that can be used in a pedestrian area to warn individuals who are blind or have low vision of an impending hazard on the route ahead. The paver has a distinctively textured walking surface with truncated domes that can be sensed by a cane or underfoot. The paver is made from crushed limestone and granite bonded together under extreme hydraulic pressure. A non-slip texture is applied to the surface of the paver. The paver can wi...[More Information]
    
    
25. PLATFORM EDGE WARNING SURFACE The Platform Edge Warning Surface is a detectable warning surface designed for use along off-street rail platforms by with blindness or low vision. Made of stone and resin composite, this tile serves as a warning and to identify the location of off-street rail platforms. The blister surface can be read by foot or cane, warning individuals with vision disabilities that they are approaching a rail platform edge. The blister pattern is offset and can be used to identify the direction the platform e...[More Information]
    
    

Page 1 of 3    Next page »