Products are listed alphabetically.

Page 1 of 1

1. 1100 HANDRAIL The 1100 Handrail is a handrail designed for use by individuals with balance, lower extremity, walking or mobility disabilities. The handrail angles toward the wall for greater wall protection. It is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches in diameter and it extends 3.75 inches from the wall. All mounting fasteners are included with the handrail. DIMENSIONS (LxH):...[More Information]
   
   
2. 1200 HANDRAIL The 1200 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail provides a gripping surface with an ergonomically designed thumb groove. It is mounted on a 0.08-inch thick, continuous aluminum retainer; and is covered with a 0.08-inch thick, scratch- and stain-resistant rigid vinyl cover. The grip is 1.5 inches in diameter, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS ...[More Information]
   
   
3. 1255 HANDRAIL The 1255 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail provides a gripping surface with ergonomically designed handrail thumb groove. It features a 2.5-inch high accent strip available in a selection of colors, patterns, finish options and custom colors. The 1255 is mounted on a 0.08-inch thick, continuous aluminum retainer; and is covered with a 0.08-inch thick, scratch and stain resistant rigid vinyl cover. The grip...[More Information]
   
   
4. 130BN BLUENOSE SURFACE MOUNT CORNER GUARD The 130BN BlueNose Surface Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product features vinyl retainer which is nearly four times stronger than aluminum retainer, preventing chipped plaster or paint or torn wallpaper resulting from bumping by wheelchairs, scooters, walkers, crutches, or canes. The 130BN is lightweight and comes with top and bottom caps. The angle measures 135 degrees. DIMENSIONS: The wing is 3 inc...[More Information]
   
   
5. 150 SURFACE MOUNT CORNER GUARD The 150 Surface Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product features a continuous aluminum retainer that has pre-slotted holes. The guard can also be used to conceal previous dings and scrapes. Top and bottom caps are included with every unit and can be color coordinated. The angle measures 90 degrees. DIMENSIONS: The wing is 3 inches wide on each side. The rigid vinyl cover is 0.080 inch thick, and the co...[More Information]
   
   
6. 160F FLUSH MOUNT CORNER GUARD The 160F Flush Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product offers minimum design interruption by creating a smooth transition from wall to corner. The 160F is mounted on a sturdy 0.070-inch pre-punched continuous aluminum retainer. Mounting fasteners and closure caps are included with the product. DIMENSIONS: The wing is 2 inches wide on each side with a 90-degree corner angle. The scratch and stain resist...[More Information]
   
   
7. 170FR G2 BIOBLEND FIRE RATED CORNER GUARD The 170FR G2 BioBlend Fire Rated Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product meets fire codes with the choice of one- or two-hour fire rating, and offers minimum design interruption by creating a smooth transition from wall to corner. The 0.080-inch non-PVC cover is manufactured with G2 blend Bio-PolyPETG+, which is made with a corn-based biopolymer and recycled content. The 170FR has an easy-wrap cover base aro...[More Information]
   
   
8. 2000 HANDRAIL The 2000 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 2.25 inches in diameter. All mounting fasteners are included with the product. The removable bottom access plate allows the handrail to be fastened to the wall. DIMENSIONS (LxD): 12 feet x 1.25 inches...[More Information]
   
   
9. 2000W HANDRAIL The 2000W Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum retainer; and is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The 2000W is manufactured with Woodland pattern full wrap, and includes all mounting fasteners and black reveals for returns and corners. The removable bottom access plate allows the handrail to be fastened to the ...[More Information]
   
   
10. 800 HANDRAIL The 800 Handrail is a handrail designed for use by individuals with balance, lower extremity, walking or mobility disabilities. The handrail provides protection for a wall and support for users. It is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches thick, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS (LxH): 12 feet...[More Information]
    
    
11. 800W WOODLAND FAUX WOOD HANDRAIL The 800W Woodland Faux Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, walking or mobility disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum container, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches thick, and it extends 3 inches from the wall. The 800W is manufactured with Woodland pattern full wrap, and includes all mounting fasteners and black reveals for...[More Information]
    
    
12. 855 HANDRAIL The 855 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail features a 3.19-inch high wayfinding accent strip available in a selection of colors and patterns. It is mounted on a 0.08-inch thick, continuous aluminum retainer, and it is covered with a 0.08-inch thick, scratch- and stain-resistant rigid vinyl cover. The grip is 1.5 inches in diameter, and it extends 3 inches from the wall. All mounting fasteners are included w...[More Information]
    
    
13. 900 HANDRAIL The 900 Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum retainer; and is covered with a scratch and stain resistant, 0.080-inch thick vinyl cover. The 900 has a 1.5-inch diameter grip, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS (LxD): 12 feet x 1.5 inches. COLOR: Available in a variety of colors and...[More Information]
    
    
14. A*COM SYSTEM The A*Com System is a modular ramp system designed to provide wheelchair access to dwellings and other structures. The system includes ramps, steps, and platforms. The system is customizable and can be reconfigured and/or relocated. The platform and steps come with a guardrail, plus an additional grasping rail for the steps. Steps come in flights of three to eight individual steps. DIMENSIONS (LxW): Platforms are 64 x 64 or 60 x 48 inches, with a 42-inch guardrail. Ramps are 60 x 48, 72 x 48, 96...[More Information]
    
    
15. A.B.E. END DRAIN WHEELCHAIR ACCESS SHOWER PAN (MODEL BF-6030) The A.B.E. End Drain Wheel Chair Access Shower Pan, model BF-6030, is a wheelchair accessible shower pan designed for use in building roll-in showers. The pan is made in a single, molded piece with a slip-resistant floor, an integral molded drain, a single threshold, and a flange on three sides. The pan is available with either a left or right drain. OPTIONS: 12 x 60 inch access ramp, model BF-1260; flexible threshhold, model BF-FT. DIMENSIONS (LxW): 30 x 60 inches. The drain is 2 inches in diam...[More Information]
    
    
16. ACCESSIBLE LIVING COLLECTION - ACCESSIBLE CABINETS The Accessible Living Collection - Accessible Cabinets are accessible kitchen components designed for use by wheelchair users. These base cabinets for the kitchen feature countertops low enough to be accessible to wheelchair users, toe kicks allowing for wheelchair access, and wheelchair reachable storage options. Cabinets in the collection include an Accessible Tambour Base Cabinet, an Accessible Base Lazy Susan, an Accessible Base Cabinet with Pullout Table, an Accessible Dishwasher Base Cabin...[More Information]
    
    
17. ADA STAINLESS STEEL SINK (MODEL PSE-2020) The ADA Stainless Steel Sink, model PSE–2020, is a portable accessible sink designed for use by individuals who use wheelchairs. This single-compartment sink features a single handle for the faucet, and it provides hot and cold running water. The PSE–2020 has a 5-gallon tank for fresh water and a 7-gallon tank for waste water. It has a 20 AMPS Preset water heater, and it rolls on four safety casters. OPTIONS: Motion sensor and water filtration. DIMENSIONS: Cabinet (WxDxH): 34 x 18.5 x 31.75 inch...[More Information]
    
    
18. ADJUSTABLE HEIGHT CLAMP ON TUB RAIL (MODEL 70889) The Adjustable Height Clamp On Tub Rail is a grab bar designed for use in bathtubs. The grab bar is made of powder-coated steel, and is adjustable in both height and width. It has a stainless steel locking mechanism for attaching to the side of a tub, with rubber pads that grip the tub without scratching. DIMENSIONS (HxW): 14 to 17 x 3 to 7 inches. COLOR: White. WARRANTY: Warranted....[More Information]
    
    
19. ALUMILITE FOLDING CURB RAMP The Alumilite Folding Curb Ramp is a portable ramp designed to provide access over curbs or steps or in and out of vans for wheelchair users. The ramp folds in half for carrying and comes with a handle and closing strap. The ramp is made of welded aluminum with a permanent non-skid surface that is integral to the aluminum and cannot tear or wear off. DIMENSIONS (LxW): 3, 4, 5, or 6 feet x 29 or 36 inches (open) and 15 or 18 inches (closed). WEIGHT: 18 to 41 pounds depending on size. CAPACITY: 60...[More Information]
    
    
20. ALUMILITE SOLID CURB RAMP The Alumilite Solid Curb Ramp is a curb ramp designed to provide access over curbs or steps for wheelchair users. The ramp features welded aluminum construction with a permanent non-skid surface that is integral to the aluminum and cannot tear or wear off. The ramp can be used as a short fixed ramp or for temporary purposes. DIMENSIONS (LxW): 3, 4, 5, or 6 feet x 30 or 36 inches. WEIGHT: 18 to 41 pounds depending on size. CAPACITY: 600 pounds....[More Information]
    
    
21. AMERIGLIDE BATTERY POWERED STAIR LIFT The AmeriGlide Battery Powered Stair Lift is an interior stair lift designed for use by individuals with arthritis or mobility, lower extremity, or walking disabilities. The padded seat has vinyl upholstery, a movable footrest, and a curved backrest, and it swivels 180 degrees to allow the user to get on and off at top and bottom landings. The lift moves on nylon wheels. It has 24-volt Class 2 grounded controls and can be installed in left or right side orientation. Safety features includes sens...[More Information]
    
    
22. AMERIGLIDE ELECTRIC POWERED STAIRLIFT The Ameriglide Electric Powered Stairlift is an interior stair lift designed for use by individuals with mobility or lower extremity disabilities or arthritis. The lift has a movable footrest, a curved backrest, and a padded seat. The seat swivels 180 degrees to facilitate getting on and off at top and bottom landings. When seated, the user pushes a control button and the seat rides smoothly on nylon wheels. The lift has 24-volt Class 2 grounded controls throughout. Safety features include footr...[More Information]
    
    
23. AMERIGLIDE ELITE RESIDENTIAL ELEVATOR The AmeriGlide Elite Residential Elevator is a home elevator designed for use by wheelchair users or individuals with mobility or lower extremity disabilities or arthritis. The elevator can be installed in a multi-level home or public or commercial building that serves disabled or elderly individuals, such as a school, church, apartment complex, or senior citizen center. It has a rigid guide rail system; a traction sheave drive system with counterweights for energy-efficient operation; self-clos...[More Information]
    
    
24. AMERIGLIDE HEAVY DUTY STAIR LIFT The AmeriGlide Heavy Duty Stair Lift is an interior seat lift designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. This stair lift has a large, contoured seat with ajustable armrests and footrests, a contoured high-backed backrest, a padded seat, and vinyl upholstery. The lift runs smoothly on nylon wheels with a half-horsepower 90-volt direct current (DC) motor. It fits on staircases 36 inches or wider, and can be oriented to the right or left. T...[More Information]
    
    
25. ARMADA MODULAR RAMP SYSTEM The Armada Modular Ramp System is a modular ramp designed to provide access for wheelchairs and scooters. The system includes ramps, platforms, support legs, and handrails. The system's universal platform design allows for virtually any configuration. Curbs and handrails can be positioned on any side. Components are made from anodized aluminum with heavy-duty welded construction. The bi-directional knurled tread forms a rugged skid-resistant surface that cannot wear off or peel. Height and slope...[More Information]
    
    
26. B.07 STRAIGHT CHAIR LIFT The B.07 Straight Stair Chair Lift is an interior or exterior seat lift designed for use by individuals with mobility or lower extremity disabilities or arthritis. This lift is suitable for residential or commercial use and can be installed indoors or outdoors on a straight staircase, leaving enough room on the staircase for others to walk by. The lift has a half-horsepower motor with a roller chain/sprocket drive system. It can be installed on either side of the staircase and customized with va...[More Information]
    
    
27. BARIATRIC HANDRAIL The Bariatric Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail is made of aluminum with powder coat. Bracket and return/corner are available in stainless steel with optional powder coat. The grip is 1.5 inches in diameter, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS (LxD): 12 feet x 1.38 inches. CAPACITY: 1000 pounds. WARRANTY: Limited lifetime warranty. ...[More Information]
    
    
28. BARRIER FREE SHOWER PAN The Barrier Free Shower Pan is a wheelchair accessible shower pan designed for use in building roll in showers. It comes with an integrated drain on the left, right, or center; splash walls; and a barrier-free and/or Americans with Disabilities Act (ADA) compliant entrance. The leak-proof shower pan surface accepts tile directly without liners, mudding, or hot mopping. The pan comes with a round, polished adjustable drain plate. OPTIONS: Square drain plate. DIMENSIONS (DxW): With center drain, 3...[More Information]
    
    
29. BRIDGE THRESHOLD RAMP (MODELS TR1, TR1.5, TR2, & TR3) The Bridge Threshold Ramp is designed to provide wheelchair or scooter access over single steps or doorways. The ramp is made from aluminum with a non-slip surface. OPTIONS: Light duty plate for creating a bridge between the ground and doorway threshold. DIMENSIONS (LxW): 8 x 36 (model TR1), 10 x 36 (model TR1.5), 14 x 36 (model TR2), or 18 x 36 inches (model TR3). Rise is 1 inch (model TR1), 1.5 inches (model TR1.5), 2 inches (model TR2), or 3 inches (model TR3). CAPACITY: 750 pounds. ...[More Information]
    
    
30. CAMBRIAN ELEVATOR The Cambrian Elevator is a home elevator designed for use by individuals with mobility disabilities. This residential elevator features automatic sliding doors on the cab and on each landing; infrared safety light curtain; digital position indicators in the elevator and over each landing; and custom fixtures to coordinate with interior decoration. OPTIONS: Solid wood paneling in oak, maple, or cherry; mirrors or glass cab walls; touch-screen controls; and television or music in the cab. COLOR: C...[More Information]
    
    
31. CLEAR CORNER GUARDS The Clear Corner Guards are designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. The protectors provide wall corner protection for light impact areas. These protectors offer the least amount of design interruption by allowing wall color or pattern to show through. They come with pre-drilled holes and self-tapping screws. Clear adhesive tape is also available. Available wing angles are 90 and 135 degrees. DIMENSIONS: Wing sizes are available in 0.75,...[More Information]
    
    
32. COMMERCIAL DOUBLE BOWL KITCHEN SINK (MODEL 22129) The Commercial Double Bowl Kitchen Sink, model 22129, is an accessible sink designed for use by individuals who use wheelchairs. Each bowl has a recessed drain opening located at the rear to allow more space underneath for a wheelchair user. Made of stainless steel with a polished satin finish, the sink has four fixture mounting holes and an undercoating that deadens sound and inhibits condensation. Mounting hardware is included. DIMENSIONS (HxDxW): Each bowl is 5.5 x 16 x 14 inches; overall cou...[More Information]
    
    
33. COMMERCIAL SINGLE BOWL KITCHEN SINK (MODELS 22130 & 22131) The Commercial Single Bowl Kitchen Sink is an accessible sink designed for use by individuals who use wheelchairs. The bowl has a recessed drain opening located at the left rear (model 22130) or right rear (model 22131) to allow more space underneath for a wheelchair user. Made of stainless steel with a polished satin finish, the sink has four fixture mounting holes and an undercoating that deadens sound and inhibits condensation. Mounting hardware is included. DIMENSIONS (HxDxW): Bowl is 5.5 x ...[More Information]
    
    
34. CORNER GUARD (MODEL DL2528) The Corner Guard, model DL2528, is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. The protectors prevent chipped plaster or paint or torn wallpaper resulting from bumping by wheelchairs, scooters, walkers, crutches, or canes. These protectors are made from durable plastic molded to fit over corner edges. They come with three screw holes pre-drilled on each side. DIMENSIONS: 48 inches high x 1/16 inch thick x 2.5 inches wide on each side. COLOR...[More Information]
    
    
35. CUSTOM REDWOOD RAMP Custom Redwood Ramps are ramps designed for use by individuals with lower extremity, mobility, or walking disabilities or spinal cord injury. This heavy duty ramp works with wheelchairs, walkers, scooters or canes. Each ramp is custom designed to meet the requirements of a specific environment, including situations where an redwood ramp is preferred over a standard aluminum ramps for aesthetic reasons. OPTIONS: Handrails can be added on one or both sides....[More Information]
    
    
36. DESIGN BASICS UNIVERSAL ACCESS HOUSE PLANS Design Basics Universal Access House Plans are plans designed for use by builders of homes accessible to individuals with mobility or other disabilities. Designs include 2-, 3-, and 4-bedroom homes in Country, Traditional, or Farm House style with 1, 1.5, or 2 stories. Finished houses range from 1,394 to 3,061 square feet. Custom alterations can be made....[More Information]
    
    
37. DRAIN FITTING (MODEL LKAD18) Drain Fitting, model LKAD18, is an offset draining fitting designed for use under wheelchair-accessible sinks. Made of chrome-plated brass, it has an offset tailpiece that allows wheelchairs to fit under the sink and a chrome-plated steel perforated grid strainer. DIMENSIONS: Drain opening is 3.5 inches in diameter; the strainer is 3 inches in diameter; top diameter is 4.5 inches. The tailpiece is offset up to 12.75 inches....[More Information]
    
    
38. DRAIN FITTING (MODEL LKAD35) The Drain Fitting, model LKAD35, is an offset drain fitting designed for use in wheelchair-accessible bathrooms and kitchens. This fitting has a stainless steel body and strainer basket, with a chrome-plated brass tailpiece that is offset to allow wheelchairs to fit under the sink. The drainer has a flex stem and rubber stopper. DIMENSIONS: Drain opening is 3.5 inches in diameter. The top diameter is 4.5 inches. The tailpiece is offset 12.75 inches....[More Information]
    
    
39. DURA-GRIP GENERAL CODE STAIR The Dura-Grip General Code Stairs are ADA compliant stairs with an easy grip handrail designed for use by individuals with balance, lower extremity, or walking disabilities. This portable aluminum stair can be adjusted to fit varying threshold heights. It comes in 3-step and 4-step models, each with a landing and two handrails. The landing has holes for drainage. DIMENSIONS: 3-step model is 28 inches high with four 7-inch risers; 4-step model is 35 inches high with five 7-inch risers. Leg height...[More Information]
    
    
40. ELITE WINDING DRUM HOME ELEVATOR The Elite Winding Drum Home Elevator is a home elevator designed for use by individuals with mobility disabilities. It has a winding drum drive with a nominal operating speed of 40 feet per minute, programmable solid state controls, an A-style Sierra prewired cab, and two to five stops with up to 50 feet of travel. The machine is installed either adjacent to the elevator shaft or overhead. POWER: Uses household current with battery for emergency lowering and lighting. DIMENSIONS: Available with ...[More Information]
    
    
41. ELMIRA ELEVATOR The Elmira Elevator is a home elevator designed for use by individuals with mobility disabilities or spinal cord injury. This compact elevator fits virtually any new or existing home or floor plan. It is available with custom cab configurations. Integrated safety locks protect against the door opening without cab present. POWER: Uses electrical current. An emergency 24-volt direct current (DC) battery backup provides lowering, lighting, and door unlocking in the event of a power outage....[More Information]
    
    
42. EZ EDGE RAMP SYSTEM (MODELS RAEZ0010, RAEZ0020, RAEZ0030, RAEZ0040 & RAEZ0050) The EZ Edge Ramp System, models RAEZ0010, RAEZ0020, RAEZ0030, RAEZ0040 and RAEZ0050, is a threshold ramp designed to provide access for individuals with lower extremity, mobility and walking disabilities, spinal cord injury and others who use wheelchairs. Molded under heat and pressure, these 100 percent recycled rubber, anti-slip ramps feature rounded front edges and molded traction pads and can be planed or trimmed to fit any doorjamb or uneven rise. The ramps may be installed using silicone ...[More Information]
    
    
43. FLEXIBLE CORNER GUARDS The Flexible Corner Guards are designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. The protectors offer a low profile appearance for minimum design interruption, and protect wall corners from dents and scratches. These protectors feature smooth, stain finish and can be installed with heavy duty adhesive. Available wing angles are 90 and 135 degrees. Angles can be adjusted plus or minus 10 degrees for installation on irregular corners. DIMENSIONS: W...[More Information]
    
    
44. FLUSH MOUNT STAINLESS STEEL CORNER GUARD The Flush Mount Stainless Steel Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other mobility devices. It is intended to provide impact protection for use in kitchens, sanitary or other high abuse areas; and it offers minimum design interruption by creating a smooth transition from wall to corner. Both Type 304 and Type 430 are available in standard 16-gauge stainless steel. It is installed with screws. DIMENSIONS: Wing sizes are available in 2 or 3 inc...[More Information]
    
    
45. FREEWILL BARRIER-FREE TRANSFER SHOWER MODULE (MODELS K-12100 & K-12101) The Freewill Barrier-Free Transfer Shower Module is an accessible roll-in shower module with built-in seat and grab bars, designed for use by individuals with mobility disabilities or spinal cord injury. This one-piece acrylic shower stall has an integral soap ledge, brushed or polished stainless steel grab bars, a fold-up seat on left (model K-12101) or right (model K-12100), molded-in floor pattern, and pit installation option. DIMENSIONS (HxLxD): 84 x 45 x 37.25 inches. Inside dimensions are ...[More Information]
    
    
46. GALVANIZED STEEL WHEELCHAIR ACCESS RAMP Galvanized Steel Wheelchair Access Ramps are permanent or semi-permanent modular ramps designed for use to provide access for wheelchairs or scooters to homes, churches, businesses and other public commercial buildings. Each section can be used individually or as a component of a larger wheelchair ramp system. Ramps are made from galvanized steel and with a non-skid surface. Its open grate style allows for dirt, leaves, and other outside debris to fall through the surface, and there is virtually...[More Information]
    
    
47. GARAVENTA SUPER-TRAC (MODEL TRE-52) The Garaventa Super-Trac, model TRE-52, is a portable inclined platform wheelchair lift designed for use by wheelchair users. This lift can be used indoors or outdoors on the stairways of public or residential buildings. Its moving platform design accommodates all types of wheelchairs, including power, children's, sports, and conventional adult wheelchairs. To operate the lift, an attendant guides the user onto the platform in a reverse position. The user is secured on the platform by a series o...[More Information]
    
    
48. GENESIS SHAFTWAY VERTICAL PLATFORM LIFT The Genesis Shaftway Vertical Platform Lift is an interior or exterior wheelchair lift designed for use by individuals with spinal cord injury, lower extremity disabilities, or mobility disabilities and others who use wheelchairs. This platform wheelchair lift fits inside a pre-built vertical runway, and can be installed for interior or exterior use. The lift system consists of a drive mast, passenger platform and doors or gates. The platform is enclosed on three sides by galvanized steel panels...[More Information]
    
    
49. GHC UNIVERSAL ACCESS HOMES GHC Universal Access Homes are modular homes designed for use by individuals with mobility disabilities. Twelve universal access floorplans are available, and each can be customized. All doorways are wide enough for wheelchair access with lever handle locksets. Other features include Aker Barrier-Free Shower Stalls with adjustable shower heads, Gerber Elongated Handicap Toilets, stainless steel brab bars, and Merillatt 24-inch bath and kitchen cabinetry. DIMENSIONS: All doors are 36 inches wide....[More Information]
    
    
50. HANDIRAMP WHEELCHAIR PORCH LIFT (MODELS HPL-50 & HPL-72) The HandiRamp Wheelchair Porch Lift is an extrerior wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. This porch lift uses a gear box and chain system to raise and lower wheelchairs or scooters. The drive system operates in all weather conditions, from minus 30 degrees to 120 degrees Fahrenheit. With a key-operated, constant-pressure switch, the rider can start, stop, and change directions at any point. The electrical system is placed well above gr...[More Information]
    
    
51. HANDRAIL (MODELS RT103, RT110, RT115/RT119, RT114/RT118, & RT120) The Handrail is a hand rail designed for use by individuals with balance, lower extremity, or mobility disabilities. Model RT103 is straight; model RT110 bends at a 135-degree angle; models RT115/RT119 and RT114/RT118 bend at a 90-degree angle, with a reinforced vertical bar on the left on models RT115/RT119 or right on models RT114/RT118; and model RT120 has a bar with a 90-degree bend set an extra distance from the wall. COLORS: White, red, dark blue, gray, or turquoise....[More Information]
    
    
52. HANDRAIL (MODELS RT130, RT131, RT136, & RT138) The Handrail is a shower wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. All models include a vertical bar and an angled horizontal bar, and are designed to be installed in the corner of a shower stall. COLORS: White, red, dark blue, gray, or turquoise....[More Information]
    
    
53. HERITAGE ELEVATOR The Heritage Elevator is a home elevator designed for use by individuals with mobility disabilities or spinal cord injury. This elevator is available with regular or custom doors to match the decor throughout the home. Features include automatic sliding doors on the cab; solid vinyl accordion gate; position indicators in the cab and on each floor; an infrared safety light curtain; custom cab sizes; and a two-speed valve for soft start and stop. The standard car operating panel has buttons and is...[More Information]
    
    
54. HES-125 STAIR PLATFORM LIFT The HES-125 Stair Platform Lift is an interior stair lift designed for use to provide access for wheelchairs and scooters in residential or commercial settings. Features include three- sided access to the wheelchair lift platform, custom colors, self-support posts, an emergency stop switch, and a fold-up seat with safety belt. The platform can be folded manually or by power to take up less stairway width. DIMENSIONS (DxW): Available platform sizes are 36 x 27.5 inches, 44 x 28.5 inches, 48 x 30 ...[More Information]
    
    
55. HORIZON LIFT TRACTION ELEVATOR The Horizon Lift Traction Elevator is a home elevator designed for use by individuals with mobility or walking disabilities. This variable speed traction residential elevator provides a smooth ride and does not require a separate engine room. Supported by three heavy-duty aircraft cables, the lift travels up to 50 feet at a speed of 40 feet per minute. In the event of a power outage, the lift's auto lowering emergency system lowers the lift to the next landing, allowing passengers to exit. The l...[More Information]
    
    
56. INVERTED T GRAB BAR The Inverted T Grab Bar is a wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. It has one vertical bar perpendicular to a horizontal bar. The bars attach to the wall at four points. OPTIONS: Slide hook. DIMENSIONS (HxW): 24 x 32 or 32 x 24 inches. COLOR: Available finishes include antique brass, polished brass, polished nickel, satin chrome, satin nickel, satin brass, satin gold, antique copper, black nickel, polished gold, oil-rub...[More Information]
    
    
57. IZI-FLOW IZI-flow is a hands-free faucet control designed to allow individuals with fine motor, grasping, or upper extremity disabilities to control a faucet. The IZI-flow is a mechanical valve that is connected to the faucet's water input(s) under the sink and controlled by a mechanical foot pedal (included). The flow speed and temperature are still set using the faucet's handle(s) or knob(s). The user turns on the faucet by depressing the foot pedal and turns it off by releasing the pedal. The IZI-flow...[More Information]
    
    
58. LUXURY LIFT 950 HYDRAULIC ELEVATOR The Luxury Lift 950 Hydraulic Elevator is a home elevator designed for use by individuals with mobility or walking disabilities. This hydraulic elevator features a large cab with a large payload capacity, and can travel up to 50 feet at a speed of 40 feet per minute. It has cab walls made from 7-ply custom cabinet grade material. The cab and its interior are custom made, and come with an aluminum anodized scissor gate or accordion style solid gate. The elevator's automatic emergency-lowering fe...[More Information]
    
    
59. LYNX ERGOHEIGHT 17-INCH HIGH ELONGATED TOILET (MODEL 21-618) The Lynx ErgoHeight 17-Inch High Elongated Toilet, model 21-618, is a tall toilet designed for use by individuals with mobility disabilities. This 1.6 gallons per flush (gpf) toilet has an elongated bowl; front jet flusing action; gravity-fed flush; a fully glazed trapway; a reverse trap; a color-matched tank lever located on the front; and two bolt caps. DIMENSIONS (HxDxW): 31 7/8 x 27.75 x 19 1/8 inches. Rim height is 17 inches; rim to water surface is 6.25 inches; water seal is 2 1/8 inches. ...[More Information]
    
    
60. MAGIC BASIN The Magic Basin is a an accessible sink with a hands-free electronic faucet designed for use by individuals with fine motor or upper extremity disabilities. Sensors in the basin's tap fittings detect the position of hands in the basin and control the water flow and temperature accordingly. In the factory setting, designed for use in public areas, placing hands in the middle of the basin activates the faucet and produces a warm water flow. The faucet is deactivated by removing hands from the wate...[More Information]
    
    
61. MAGIC FAUCET The Magic Faucet is an electronic faucet designed for use by individuals with fine motor, grasping, or upper extremity disabilities. This faucet allows an individual with limited use of the hands to control water flow and temperature by touching the tap fitting or by moving the hand into the vicinity of the outlet (a distance of approximately two centimeters). The flow of water is ended by removing hands or by moving the hands or fingers through the flow of water. The faucet comes with 10 progra...[More Information]
    
    
62. MATOT COMMERCIAL GRADE RESIDENTIAL DUMBWAITER The Matot Commercial Grade Residential Dumbwaiter is a dumbwaiter designed for use by individuals with mobility or physical disabilities for moving material from floor to floor in multi-level environments. Items that can be handled by this unit include groceries, dishes and cutlery, laundry, firewood, clothing, or luggage. The loading height is counter level, with single side, opposite sides, or adjacent side loading configurations available. The lifting distance is up to 50 feet, with a speed o...[More Information]
    
    
63. MOTORIZED DOORGLASS BLINDS (MODELS 684-MRBL & 686-MRBL) Motorized Doorglass Blinds are windows with motorized blinds designed for use by individuals with limited strength or grasp. Blinds are built into a window frame that can be installed in a door or a wall, and are controlled by a touch pad in the side of the window frame. Blinds have metal slats that can be raised, lowered, or tilted to admit partial light with a single control, and can be adjusted from the top down or from the bottom up. The window has two panels of tempered safety glass that ar...[More Information]
    
    
64. NATIONAL RAMP MODULAR RAMP SYSTEM The National Ramp Modular Ramp System is a modular ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp modules can be installed in permanent, semi-permanent, or temporary situations and is intended for commercial or residential use. Units are made of high-strength, non-flammable aluminum, and require no painting or sealant. The grooved aluminum surface is slip resistant with open mesh to let rain and snow through. Handrails are included on all modules....[More Information]
    
    
65. NATIONAL RAMP PATHWAY RAMP The National Ramp Pathway Ramp is a portable ramp designed for use by individuals with mobility or walking disabilities. This ramp provides temporary or semi-permanent home access for use with scooters, wheelchairs and walkers. Made of welded aircraft-grade aluminum, it is strong but lightweight and portable. It has a skid-resistant surface and a self-adjusting bottom transition plate for conversion from ramp to ground....[More Information]
    
    
66. NATIONAL RAMP PATHWAY RAMP WITH RAIL The National Ramp Pathway Ramp with Rails is a portable ramp designed for use by individuals with balance, mobility, or walking disabilities. Made of aluminum with an extruded non-skid surface, it can be used outdoors in all weather conditions, and can be moved or relocated. Numerous widths, lengths, and handrail options are available....[More Information]
    
    
67. NATIONAL RAMP THRESHOLD RAMP (ALUMINUM) The National Ramp Aluminum Threshold Ramp is a portable, modular ramp designed for use to make thresholds acccessible to wheelchair, walker, and cane users. This lightweight, durable, free-standing ramp can be placed indoors or outdoors in front of doorways, sliding glass doors, and raised landings. Made of anodized aluminum, the ramp is seam-free. The modular design with its interchangeable components accommodates thresholds from 0.75 to 6 inches high. DIMENSIONS: 34 inches wide....[More Information]
    
    
68. NATIONAL RAMP THRESHOLD RAMP (RUBBER WEDGE) The National Ramp Rubber Wedge Threshold Ramp is a portable ramp designed for use to make thresholds accessible to wheelchair users. The wedge is placed against the door threshold, either inside or outside, to provide a smooth ground-to-sill transition. Made of recycled tires, the ramp is slip resistant and portable. The ramp can be trimmed for lower heights and widths or combined to reach greater heights. For wider entrances, two ramps can be placed side by side. DIMENSIONS: 48 inches wide....[More Information]
    
    
69. NATIONAL RAMP THRESHOLD RAMP (RUBBER) The National Ramp Rubber Threshold Ramp is a ramp designed for use to make thresholds accessible to wheelchair users. Placed in front of a door, it provides a smooth ground-to-sill transition. Made of 100 percent recycled materials, this portable indoor/outdoor ramp is slip-resistant and can be used on any surface. It can be trimmed or notched for a custom fit, and can be moved to any location. It does not interfere with door tracts, so it can be used with sliding glass doors. DIMENSIONS: 36 in...[More Information]
    
    
70. PASSPORT SERIES CABINETS Passport Series Cabinets are accessible cabinets for the home office and kitchen designed for use by wheelchair users and individuals of short stature. This universal design series combines traditional cabinetry with features such as low countertops and drawers....[More Information]
    
    
71. PRESO MATIC KEYLESS ENTRY LOCK (MODELS 8101, LT8102, 8200, & 8200A) Preso Matic Keyless Entry Lock, models 8101, LT8102, 8200, and 8200A, is a keyless door lock designed for use by individuals with fine motor or grasping disabilities. These mechanical keyless entry door locks are operated by pushbutton combination. The keypad has 10 pushbuttons, operated by pressing a 4 or 7 digit combination. The lock unlocks automatically when last digit is pressed. No knobs to turn or twist. Unlocks on the interior by pressing the unlock button. Models 8200 and 8200A have a d...[More Information]
    
    
72. QUICK RAMP KIT The Quick Ramp System is a ramp kit designed for use by a contractor or an individual to build and install a ramp system to provide access for wheelchairs and scooters. This pre-engineered kit includes aluminum ramp components and support assemblies, stainless steel fasteners, and detailed instructions that provide Americans with Disabilities Act (ADA) guidelines, handrail options, and cut lists for the required lumber....[More Information]
    
    
73. REGAL HYDRAULIC DRIVE HOME ELEVATOR The Regal Hydraulic Drive Home Elevator is a home elevator designed for use by individuals with mobility disabilities. It has a roped hydraulic drive with a nominal operating speed of 40 feet per minute, programmable solid state controls, an A-style prewired Sierra cab, emergency lowering and lighting, two to five stops with up to 50 feet of travel, and a separate machine room, which can be located adjacent to the shaftway or in a remote location on any floor. POWER: Uses household current with ...[More Information]
    
    
74. RESIDENTIAL LIFTAVATOR The Residential Liftavator is a home elevator designed for use by individuals with mobility or walking disabilities. This elevator provies service up to 50 feet in new and existing residences. The elevator is installed in a completely enclosed fire-rated hoistway. Doors and gates are fully interlocked for safety. Features include a commercial hydraulic cylinder power unit; automatic or key control; carpet flooring; illuminated push buttons; emergency ligting; solid panel aluminum, stainless, or...[More Information]
    
    
75. RESIDENTIAL VERTICAL LIFT JUNIOR Residential Vertical Lift Junior is a home elevator designed for use by wheelchair users or individuals with balance, lower extremity, or mobility disabilities or arthritis. It has an expanded metal platform with a tubular platform wall; an alternating current (AC) motor with screw drive; keyed, constant pressure controls; an emergency stop; and top and bottom limit switches. Switches and controls are weather resistant. The elevator comes fully assembled but can be disassembled for inside instal...[More Information]
    
    
76. RESIDENTIAL VERTICAL LIFT XL The Residential Vertical Platform Lift XL is a home elevator designed for use by wheelchair users or individuals with balance, lower extremity, or mobility disabilities or arthritis. The elevator has an expanded metal platform with straight-through access and full visibility under the platform. It has a screw drive with soft touch control pads and a keyed emergency stop. POWER: Uses 110-volt alternating current (AC) wall outlet. Optional 24-volt direct current (DC) battery backup is available. O...[More Information]
    
    
77. RIGHT / LEFT REVERSIBLE HANDRAIL (MODELS RT124, RT126, & RT128) The Right/Left Reversible Handrail is a wall grab bar designed for use in bathrooms by individuals with balance, lower extremity, or mobility disabilities. The hand rail has veritcal and horizontal bars, and is right/left reversible. DIMENSIONS (HxW): 762 x 475 millimeters (model RT124); 762 x 762 millimeters (model RT126); or 762 x 1200 millimeters (model RT128). COLORS: White, red, dark blue, gray, or turquoise....[More Information]
    
    
78. RUBBER THRESHOLD RAMP The Rubber Threshold Ramp is an accessible threshold designed to provide wheelchair or scooter access in entryways. To provide a smooth and secure transition, the ramp is positioned against the door threshold. The rubber can be trimmed to fit the doorway, and ramps can be stacked for higher rises. DIMENSIONS (HxLxW): 1.5 x 14 x 36 inches, 2.5 x 24 x 48 inches, or 4.75 x 48 x 48 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds (1.5 inch rise), 40 pounds (2.5 inch rise), or 127 pounds (4.75 inch ri...[More Information]
    
    
79. SAFESHOWER TRANSITIONS SafeShower Transitions are shower ramps designed to make shower stalls accessible to individuals with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. These ramps can be installed with silicone adhesive for a permanent application or with double-back tape for less permanent applications. They have a slip resistant surface and are made of composite plastic that is not absorbent. SafeShower transitions come with a built-in side approach, or they can be...[More Information]
    
    
80. SMARTBUILT HOME The SmartBuilt Home is an house with built-in automation designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The house has built-in home automation that links lighting, electrical outlets, HVAC (heating-ventilation-air conditioning) and home entertainment to a central computer, allowing them to be operated from anywhere in the home, or remotely via telephone or the internet. In-wall touchscreens show the status of the entire home through simple gr...[More Information]
    
    
81. SMARTHOME MANAGER PLUS CD-ROM (MODEL 1132CDP) The Smarthome Manager Plus CD-ROM, model 1132CDP, is a environmental control and home automation program designed for use by individuals with physical or mobility disabilities. It includes a suite of software tools that allow the user to automate, manage, and monitor a home. When coupled with an interface device, such as the Smarthome PowerLinc Controller USB (not included), this software provides total home control. The user can set up time and conditional events for a room or the whole house. ...[More Information]
    
    
82. STEP SAVER STRAIGHT STAIR CHAIR The Step Saver Straight Stair Chair is an interior seat lift designed for use by individuals with mobility or walking disabilities. This stair lift is designed for use on a straight run stairway features a rigid and compact aluminum rail anchored to the stair treads. Its swivel seat is height- and width-adjustable and locks in 45- and 90-degree positions in both directions. It comes with padded armrests, ABS plastic covers, a footrest, a seatbelt and seat swivel switch. The footrest, seat, and a...[More Information]
    
    
83. STERLING VERTICAL PLATFORM LIFT The Sterling Vertical Platform Lift is an exterior wheelchair lift designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. This lift provides level wheelchair access for up to two passengers. Features include an automatic folding access ramp, non-skid surface for the platform and ramp, under-platform safety sensors, protective side walls, textured powder- coat finish, final limit switch, and key- controlled access. POWER: Uses 110 volts alternating cu...[More Information]
    
    
84. SUMMIT STAIRWAY LIFT The Summit Stairway Lift is an interior stair lift designed for use by individuals with balance, mobility, or walking disabilities. The stair-mounted, extruded aluminum track installs on either side of the staircase and is factory cut to fit the stairs. The unit's controls mount on either armrest. Foot- or finger-activated call controls can be mounted on either the wall or floor at the top and bottom of the stairs. Constant-pressure controls stop the lift the instant the user releases the contro...[More Information]
    
    
85. SURFACE MOUNT STAINLESS STEEL CORNER GUARD The Surface Mount Stainless Steel Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other mobility devices. It provides impact protection in high abuse areas. The Standard Type 430 is available in standard 16-gauge stainless steel, and is also available in 14- and 18-gauge. The Standard Type 304 is available in standard 16-gauge, and is also available in 14-gauge. Custom sizes are also available. The user can choose between two installation methods: cement...[More Information]
    
    
86. SWING CLEAR DOOR HINGES The Clear Swing Door Hinges are offset hinges designed to allow the door to swing clear of the opening, permiting greater width for wheelchair access....[More Information]
    
    
87. TAPE-ON WOODLAND FAUX WOOD CORNER GUARDS The Tape-On Woodland Faux Wood Corner Guards are designed to protect wall corners from damage by walkers, crutches, and canes. The protectors offer minimum design interruption with its low-profile appearance, and it can be quickly installed with factory applied adhesive tape. No-tape option is also available for installation on vinyl wallcovering with a heavy-duty adhesive. These protectors are made from faux wood. Available wing angles are 90 degrees, 90 degrees bullnose, and 135 degrees. DIMEN...[More Information]
    
    
88. THRESHOLD RAMP The Threshold Ramp is an accessible threshold designed to enable wheelchair users to get through dooways and over thresholds. This low profile aluminum unit can adapt a doorway or threshold from 1 to 4 inches in height. Its top lip seamlessly covers the existing threshold for a smooth transition. The ramp is constructed from welded aluminum with a permanent skid resistant surface, and can be used indoors or outdoors. DIMENSIONS (LxW): 6, 12, 18, 24, or 36 x 30 or 36 inches. WEIGHT: 6 to 28 pound...[More Information]
    
    
89. THRESHOLD RAMP - LEGO-STYLE The Threshold Ramp - Lego Style is a threshold ramp designed for use to make doorways accessible to wheelchair users and individuals with mobility or walking disabilities. The ramp is lightweight, and it allows water to flow through so it can be used outdoors, in a bathroom or other environments in which the floor or ground may get wet. It has a non-slip surface and can be used on both the inside and outside of the doorway for rolling over the threshold. It accommodates most doorway entrances in...[More Information]
    
    
90. ULTRA STAIR LIFT The AmeriGlide Ultra Stair Lift is an interior seat lift designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. The lift has a plastic seat and a half-horsepower motor with rack and pinion drive. The seat and chassis assemblies come pre-assembled. The lift comes with two wireless call/send remote controls and one hand-held/pendant control. Safety features include a seat belt and footrest obstruction sensor, swivel seat, and end-of-track safety senso...[More Information]
    
    
91. UNIVERSAL DESIGNED SMART HOMES FOR THE 21st CENTURY Universal Designed 'Smart' Homes for the 21st Century is a book of house plans designed for use by people with disabilities. Based on universal design principles, these 102 plans, which can be ordered and built, are for homes fully accessible to people with disabilities. Many models are less than 2,000 square feet and are designed for narrow lots for urban infill, as well as retirement communities. The remaining homes are largely less than 4,000 square feet. Home types include in-law additions, ...[More Information]
    
    
92. VERTICAL HOME LIFT (MODELS PL-50 & PL-72) The Vertical Home Lift, models PL-50 and PL-72, is an exterior home wheelchair lift designed for use by individuals with mobility, lower extremity, or severe physical disabilities or spinal cord injury. This home porch lift accommodates electric wheelchairs and scooters. It includes a steel frame, constant pressure switches, a low non-slip platform for roll-on access, and a safety barrier. The lift runs on a gear box and chain. All mechanics are fully enclosed and can be accessed through the rea...[More Information]
    
    
93. WAUPACA CUSTOM ELEVATOR The Waupaca Custom Elevator is a home elevator designed for use by people with mobility disabilities. The unit comes standard with a cable drive, steel guide channel, spring applied drum brake, and a standard cab featuring a custom interior, lighting, and a metal scissors gate. POWER: The lift is powered by a 2 horsepower motor and high ratio gearbox. SPEED: 30 feet per minute. CAPACITY: 500 pounds. DIMENSIONS: The standard cab is 3 x 4 x 6 feet 8 inches; the guide channel is 8 inches wide and 3...[More Information]
    
    
94. WHEELCHAIR ACCESSIBLE SHOWER THRESHOLD (MODEL 8452A) The Wheelchair Accessible Shower Threshold, model 8452A, is a shower threshold ramp designed for use in wheelchair-accessible showers. The solid neoprene gasket keeps water in while allowing wheels to pass over by compressing the neoprene. DIMENSIONS (HxW): 1.25 x 1.75 inches; height is reduced to 0.278 inches when compressed by wheels....[More Information]
    
    
95. YALE 5400LN SERIES HEAVY-DUTY CYLINDRICAL LOCKSET The Yale 5400LN Series Heavy-Duty Cylindrical Lockset, is a door lock with lever handle designed for use by individuals with grasping, fine motor, or neurological disabilities. Designed for industrial, commercial, and institutional use, features include Yale 6- and 7-pin standard and interchangeable core cylinders; stainless steel latchbolt with direct half-inch throw; wear-resistant chassis plates; heavy-duty lever return springs to prevent lever sag and provide positive return of lever to hor...[More Information]
    
    

Page 1 of 1