Products are listed alphabetically.

Page 1 of 1

1. 2GB BLANK CARTRIDGE FOR NLS/BARD AND LIBRARY OF CONGRESS NEW DIGITAL TALKING BOOK PLAYERS The 2GB Blank Cartridge for NLS/BARD and Library of Congress New Digital Talking Book Players is a digital talking book cartridge designed for use by individuals who are blind or have low vision or physical disabilities that prevent holding a book. This cartridge is the new format for digital audio materials from the National Library Service for the Blind and Physically Handicapped (NLS) of the Library of Congress, and is used by eligible borrowers to download digital talking books and magazines...[More Information]
   
   
2. 3R80 PROSTHETIC KNEE The 3R80 Prosthetic Knee is a knee prosthesis designed for use by individuals with lower extremity amputation. This knee's rotary hydraulic responds to ground reaction forces during the stance phase of gait. It utilizes a high hydraulic resistance to prevent involuntary flexion of the knee. This stance phase control is advantageous on uneven surfaces, slopes, and when walking down stairs. The knee has four optimized adjustment options for stance phase and swing phase control. Flexion and extensi...[More Information]
   
   
3. ABLEWARE FOOD BUMPER The Ableware Food Bumper is a food guard designed for use by individuals with upper extremity or neurological disabilities, stroke, cerebral palsy, or upper extremity amputation who want to use conventional tableware, but have difficulty getting food onto utensils and keeping food on the plate. These sanitary food bumpers clip onto any circular dinner plate 9 to 11 inches in diameter and provide walls against which food may be pushed onto forks or spoons. The plastic walls also prevent food from...[More Information]
   
   
4. ACCENT FOOT The Accent Foot is a prosthetic foot designed for use by individuals with lower extremity amputation. This is a cosmetically appealing foot with an adjustable heel height. This dynamic response foot incorporates transverse rotation and inversion-eversion for low to moderate activities. The foot is available with a dynamic pylon or an integrated pyramid. For cosmetic finishing, the foot has ankle fairing and a sandal toe. The foot is lightweight and multi-axial, with three firmness options. Int...[More Information]
   
   
5. ACCUPOINT AccuPoint is a mouse emulator and computer cursor control interface designed for use by individuals with fine motor control or upper extremity disabilities or amputation, cerebral palsy, or spinal cord injury. While distinguishing tremors from intentional movements, this movement tracking system enables the user to control the mouse and type letters with movements ranging from very small to very large. The unit mounts on the back of the user's computer display and plugs into the computer with a ...[More Information]
   
   
6. AIRLITE MONOLITHIC PROSTHESIS (MODELS AB1, AB2, & AB3) The Airlite Monolithic Prosthesis is an endoskeletal below-knee prosthesis designed for use by individuals with lower extremity amputation. This endoskeletal prosthesis is made from a braided carbon fiber material that produces a plastic stronger than steel when combined with resin during the fabrication process. The prosthesis includes a carbon composite ankle block with a fixed ankle (model AB1) or an alignable ankle (models AB2 and AB3). The model AB2 alignable ankle incorporates the same lam...[More Information]
   
   
7. AIRVOTER (MODEL AC-0300-AV1V2) The AirVoter, model AC-0300-AV1V2, is a pneumatic (sip and puff) voting machine control designed for use by voters with upper extremity disabilities or amputation, neurological or severe physical disabilities, spinal cord injury, or cerebral palsy. This system allows the user to vote independently on an accessible voting machine through sips or puffs on a disposable mouthpiece in time with visible or headphone-audible cues. After a voter has completed a ballot, the mouthpiece is discarded and th...[More Information]
   
   
8. ALL INCLUSIVE LEND-A-HAND The All Inclusive Lend-A-Hand is a forearm cuff tool holder or grasping aid designed to help people with grasping disabilities, upper extremity disabilities or hand amputees to hold a variety of objects that have a narrow handle, including golf clubs, tools, brooms, mops, rakes shovels and paint brushes. The All Inclusive Lend-A-Hand is a long pocket constructed of heavy-duty fabric that is firmly attached to the user’s forearm by three straps that fasten with snaps. Five interchangeable, revers...[More Information]
   
   
9. ALL PURPOSE QUICK GRIP ADAPTER (MODEL APQGA01-0N2) The All Purpose Quick Grip Adapter, model APQGA01-0N2, is a clamp for upper extremity prosthesis designed for use by individuals with upper extremity amputation. This clamping adapter provides a one-inch clamp opening. Made of high-density polyethylene and steel, the unit attaches to a prothesis using a standard N-Abler II terminal device (see separate entry), and is available with a 0.5-inch 20-thread tool shank adapter for individuals using an NF (national fine) threaded wrist unit, or with me...[More Information]
   
   
10. AMERICAN RAMP SYSTEM AMRAMP MODULAR STEEL WHEELCHAIR RAMP The American Ramp System AmRamp Modular Steel Wheelchair Ramp is a modular ramp designed for use by individuals who use wheelchairs or scooters or who cannot use stairs. The steel mesh design of the ramp allows for rain and snow to pass through, minimizing slippery conditions. Ramps are available for permanent and temporary applications, and may be installed the next day after purchase or rental. Ramps are available with or without handrails on both sides. OPTIONS: Turning landings. DIMENSIONS...[More Information]
    
    
11. AMPUTEE LOWER EXTREMITY REHABILITATION EXERCISE KIT The Amputee Lower Extremity Rehabilitation Exercise Kit is an exercise planning program designed for use by physical therapits who work with individuals with lower extremity amputation. The program presents 122 professionally illustrated exercises for individuals with lower extremity amputation, including post operative exercises and exercises for the upper extremity, sound lower extremity, back and trunk. It includes 26 reproducible full page patient tip sheets dealing with transfers, shrinker ...[More Information]
    
    
12. ARTIFICIAL MUSCLE-OPERATED (AMO) ARM -------- PROTOTYPE --------- PURPOSE: To create a prototype of a prosthetic arm that is controlled by the user’s brain signals, and powered by compressed air for individuals who have had an arm amputated or who are otherwise missing an arm. Undergraduate biomedical engineering students; Thiago Caires and Michal Prywata, from Toronto’s Ryerson University have created the Artificial Muscle-Operated (AMO) Arm. The AMO arm offers a greater range of movement than traditional prostheses, doesn’t requ...[More Information]
    
    
13. ASL PNEUMATIC SWITCH - SIP N PUFF (MODEL ASL308) The ASL Pneumatic Switch - Sip & Puff, model ASL308, is a pneumatic switch designed for use by individuals with cerebral palsy, neurological disabilities, upper extremity amputation, spinal cord injury, or upper extremity disabilities. This switch has two mono jack outputs that allow breath control of two separate functions. OPTIONS: ASL 607 series of sip n puff tube mounts....[More Information]
    
    
14. AT&T 2-LINE SPEAKERPHONE (MODEL 982) The AT&T 2-Line Speakerphone, model 982, is a telephone with speakerphone designed for use by individuals who have difficulty holding a receiver. This hearing-aid compatible phone has two-line operation capability, 24 speed dial numbers, three-party conferencing (for multi-line systems), and chain dialing. Other features include a data port, distinctive ring tones, flash, headset compatibility (with a 2.5-millimeter jack), hold, line status indication, mute, programmable pause, and selectable di...[More Information]
    
    
15. AUTOMARK The AutoMARK is a voice output and switch adapted voting machine designed for use by individuals who are blind or have low vision or upper extremity disabilities. This touchscreen electronic voting machines has adjustable on-screen font sizes for voters with low vision, voice output for voters who are blind, and a sip/puff tube for voters unable to use the touch screen or buttons. The unit also has multiple language capability and supports write-in candidates, and can be used in combination with...[More Information]
    
    
16. AXTION FOOT (MODEL 1E56) The Axtion Foot, model 1E56, is a prosthetic foot designed for use by individuals with lower extremity amputation. Made from urethane and carbon, it is a lightweight high function foot for active users. Features include a dynamic heel, a pyramid with an integrated elastomer wedge, and a long carbon fiber toe lever. SIZES: 22 to 31. DIMENSIONS: Profile is 2 1/8 inches. The heel is 0.5-inch high. CAPACITY: 275 pounds. WEIGHT: 13 ounces. WARRANTY: 36 months....[More Information]
    
    
17. BALANCE TRAINING SYSTEM FOR CHILDREN -------- PROTOTYPE --------- PURPOSE: To create a prototype of a balance training system for children with disabilities using Wii balance board technology. Students from Rice University linked together five Wii balance boards to a computerized motion tracking system and developed a game based on this system to help children advance their balance skills. The boards are lined up in a row between active handrails that provide feedback on how heavily users depend on their arms. The game requires the...[More Information]
    
    
18. BIOM The BiOM is a below knee robotic prosthesis that designed for use by individuals with lower extremity amputation. This prosthesis, which includes the foot, ankle, and lower calf, uses robotics to replicate the calf muscles and Achilles tendon. With each step, the BiOM provides a powered push-off which propels the wearer forward. Powered plantar flexion enables the prosthesis to normalize the gait and metabolic demands to those of non-amputees. With its bionic functionality, this prosthesis can r...[More Information]
    
    
19. BLANKET SUPPORT ---- DO IT YOURSELF ENTRY ---- PURPOSE: To remove the weight of bed coverings from sensitive legs and feet for individuals with spinal cord injury, neurological disabilities, burns, or arthritis. This article, included in a chapter entitled "Bedroom & Getting Dressed," describes how to make a strong, flexible blanket support from PVC pipe and fittings. When assembled, the base of the unit slides between the bed's mattress and box spring and the top extends above the foot of the bed; sheets, blan...[More Information]
    
    
20. BOB-1 -------- PROTOTYPE --------- PURPOSE: To design a prototype of a prosthetic device that allows children who have no fingers write with a pen or pencil. A team of girl scouts from Iowa, ages 11 through 13, came up with a design that assisted a 3-year-old girl born without fingers on her right hand to write. The device, called BOB-1, is a platform strapped to an arm with a cylindrical holder that can be used to hold a pen, pencil, or similar tool. With the device attached to her hand, the three-ye...[More Information]
    
    
21. BODY MOUNT (LEG) FOR IPHONE, IPOD TOUCH AND IPAD The Body Mount (Leg) for iPhone, iPod Touch and iPad is a cell phone holder and tablet computer mounting system for people with upper or lower extremity, grasping and mobility disabilities, people with use of one hand, and wheelchair users. The system includes two adjustable straps to secure an iPad, iPhone, or iPod Touch on the user's leg while seated in a wheelchair. OPTIONS: Mounts are available for the iPod Touch, iPhone 4, iPhone 4G, iPad 1 and iPad 2....[More Information]
    
    
22. BOOST TRACER Boost Tracer is a head-controlled mouse emulator designed for use by individuals with spinal cord injury, cerebral palsy, muscular dystrophy, multiple sclerosis, ALS, carpal tunnel syndrome, or any other disability where the user lacks the hand control to use a standard mouse but retains good head movement. A micro-gyroscope senses the user's head movements, then transmits those movements to the computer using radio frequency (RF) waves, with an operating range of up to 15 feet. Custom switches ...[More Information]
    
    
23. BOTTOMS UP BAR The Bottoms Up Bar is a transfer aid designed for people with lower extremity and mobility disabilities or spinal cord injury and lower extremity amputees. It allows a person in a wheelchair to transfer to a seated position on the ground or floor and from the floor or ground back into the wheelchair. The Bottoms Up Bar attaches to a wheelchair's frame with two collar clamps that are fastened to the front of the frame. The width of the Bottoms Up Bar is adjustable to accommodate multiple wheelcha...[More Information]
    
    
24. BOTTOMS UP BAR ADJUSTABLE BASE UNIT The Bottoms Up Bar Adjustable Base Unit is a transfer aid designed for people with lower extremity and mobility disabilities or spinal cord injury and lower extremity amputees. It allows a person to use the Bottoms Up Bar (see separate record) transfer from a parked wheelchair or a chair, sofa or other sitting furniture to a seated position on the ground or floor and from the floor or ground back into the chair. The four legs of the Bottoms Up Bar are placed into holes in the Base Unit's frame ...[More Information]
    
    
25. BRAKE DIRECTOR Brake Director is a one hand dual brake lever designed for use by bicyclists with upper extremity disabilities, amputation, or stroke. This inline component installs in any cable-operated two-brake system so that one brake lever or other control operates both brakes with the force and control of two hands. This component easily installs on any normal hand-brake equipped as well as recumbent, hand bikes and other special needs bicycles. WARRANTY: Fully warrantied against manufacturing defects of...[More Information]
    
    
26. BYTESWITCH SEWING MACHINE The ByteSwitch Sewing Machine is a sewing machine with hand or mouth controls designed for use by individuals with spinal cord injury or lower extremity amputation or disabilities. This is an adapted version of the Singer school model sewing machine, and comes with standard features such as an easy threading auto-tension system and foot pedal, with the addition of a ByteSwitch speed controller that works with the machine's electronic speed control. The switch uses captive air to control sewing s...[More Information]
    
    
27. C-LEG (MODEL 3C100) The C-Leg, model 3C100, is a microprocessor-controlled prosthetic knee designed for use by individuals with lower extremity amputation. For stability, the knee's microprocessors control the knee's hydraulic function 50 times a second. The maxium flexion angle is 125 degrees. The knee is available in standard and knee-disarticulation versions. OPTIONS: Feet approved for use with the C-Leg are models 1D25, 1A30, and 1D10; C-Walk (model 1C40); LuXon Max (model 1E40); Lo Rider (mode 1E57); and the L...[More Information]
    
    
28. CAMERA MOUSE Camera Mouse is a mouse emulator program designed for use by individuals with severe physical or neurological disabilities, cerebral palsy, spinal cord injury, or upper extremity amputation. This program allows the user to control the mouse pointer on a computer through head movement. To use the software, a USB video camera (webcam) is connected to the computer, with the camera placed on the monitor and focused at the user. The user's moving image appears in the Camera Mouse window. A mouse clic...[More Information]
    
    
29. CEYE EYE CONTROL MODULE The CEye Eye Control Module is an eye controlled input system designed for use by individuals with severe physical, neurological, or upper extremity disabilities, spinal cord injury, or upper extremity amputation. This unit enables the user to control the mouse by looking at a screen and dwelling (staring at the screen for a certain length of time) to select and blinking to click. Users place themselves in front of the screen for a one-time calibration, after which the system is fully automatic....[More Information]
    
    
30. CHALLENGER JACKET The Challenger Jacket is a men's or women's jacket designed for use by individuals with temporary or permanent upper extremity disabilities or amputations. The left and/or right jacket sleeve is custom modified to accommodate a brace, cast, compression wrap, or prosthesis. The jacket has a durable water repellent Teklon nylon shell, a poly-filled body with heavyweight fleece lining, rib knit waistband and cuffs, lower slash pockets, an interior pocket, and nylon lining in the sleeves. All pocket...[More Information]
    
    
31. CLIP-ON ASHTRAY WITH REMOTE TUBE (MODEL 562187) The Clip-On Ashtray with Remote Tube, model 562187, is a clip on ashtray and remote smoking device designed for use by smokers who use wheelchairs and have upper extremity disabilities. The cigarette is placed in one end of the tube, which holds it over the ashtray, and the smoker uses the mouthpiece of the tube to smoke. The ashtray has two clips which snap onto wheelchair. Security rubber rings snap over the ends of clips to lock the unit in place. DIMENSIONS: Tube is 36 inches long....[More Information]
    
    
32. COLLEGE PARK TRES FOOT The College Park Tres Foot is a prosthetic foot designed for use by individuals with lower extremity amputation. With a full-length toe lever and soft components to articulate inversion/eversion, this dynamic response foot can help restore function for individuals with moderate activity. The foot comes permanently assembled in an integrated foot shell without a Spectra sock. DIMENSIONS: 21 to 30 centimeters long. CAPACITY: 220 pounds. COLOR: Caucasian or brown foot shell. WARRANTY: One year....[More Information]
    
    
33. COLLEGE PARK TRIBUTE FOOT The College Park Tribute Foot is a prosthetic foot designed for use by individuals with lower extremity amputation. This foot/ankle unit is multi-axial for stability on uneven terrain, with a dynamic response keel and heel, transverse rotation, and a full-length toe lever for increased comfort. It has adjustable plantar flexion and dorsiflexion, adjustable inversion/eversion, adjustable transverse rotation, and adjustable stride control. DIMENSIONS: 21 to 30 centimeters long. CAPACITY: 220 pound...[More Information]
    
    
34. COLLEGE PARK TRUPER FOOT The College Park TruPer Foot is a prosthetic foot designed for use by children with lower extremity amputation. This foot provides multi-axial function and dynamic response, and is customizable for each individual child. To accommodate the growth of the child, this prosthesis has interchangeable foreheels and shells, growth plates, and bumpers for two growth ranges. The foot shell has an anatomical shape and a sandal toe. The endoskeletal Sealing Boot and exoskeletal Finishing Ring protect the f...[More Information]
    
    
35. COLLEGE PARK TRUSTEP FOOT The College Park TruStep Foot is a prosthetic foot designed for use by individuals with lower extremity amputation. This prosthesis is multi-axial with rotation, and has a split toe to allow up to a half-inch of independent toe flex during normal use. The foot can be customized to provide a natural gait pattern. DIMENSIONS: 22 to 31 centimeters long. CAPACITY: 352 pounds. COLOR: Caucasian, brown, or jet-black foot shell. WARRANTY: Up to three years....[More Information]
    
    
36. COLLEGE PARK VENTURE FOOT The College Park Venture Foot is a prosthetic foot designed for use by individuals with lower extremity amputation. The foot has a full-length toe lever and multi-axial, dynamic response, and transverse rotation functions. To fit the individual's gait, it has adjustable plantarflexion-dorsiflexion, inversion-eversion, transverse rotation, and stride control. DIMENSIONS: 21 to 30 centimeters long. CAPACITY: 275 pounds. COLOR: Caucasian, brown, or jet-black foot shell. WARRANTY: Three-year warran...[More Information]
    
    
37. COMPACT SUPER HEMI 797 (MODEL 797, 797E, 797C, 797CE, 797N, 797NE, 797W, & 797WE) The Compactor Super Hemi 797 is a lightweight folding manual wheelchair for use by children and adults with lower extremity, mobility, or neurological disabilities or spinal cord injury as well as amputees. In addition to the standard adult 797 model, this wheelchair comes in children’s (models 797C and 797CE), narrow adult (models 797N and 797NE) and wide adult (models 797W and 797WE) versions. FRAME (HxLxW): 31 to 34 x 39 or 41 x 21, 23, 25, or 27 inches. The dual axle position, multi-angle ca...[More Information]
    
    
38. CRITERIUM 75 & CRITERIUM 85 BICYCLE HANDLEBAR ADAPTER The Criterium Bicycle Handlebar Adapter is a bicycle accessory designed for use by individuals with upper extremity amputation. This recreational accessory snaps on and off a 1-inch diameter bicycle handle bar, which is standard in the bicycle industry. The unit is constructed of a durable synthetic polymer. It has no moving mechanical parts or adjustable release mechanisms, and gets its gripping and release force from its shape and the flexible properties of the synthetic material from which it...[More Information]
    
    
39. CUSTOM ADAPTED PRAM -------- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted pram (stroller) for a mother with arm amputation below the right elbow and back problems. The mother found it difficult and painful to push her baby’s pram as she had to stoop over to reach the handles due to her arm amputation. The mother’s physiotherapist became increasingly concerned by the arching and twisting that the mother's back experienced while pushing the pram. To stop the twisting, a design a handle extensio...[More Information]
    
    
40. CUTTING BOARD (MODEL 16K013) The Cutting Board, model 16K013, is designed for use by individuals with the use of only one hand, arthritis, neurological disabilities, or spinal cord injury. This polypropylene unit firmly attaches to a counter-top or table with the use of four attached suction cups designed to hold the board in a stable position. The board can be used to make sandwiches, slice meats and chop vegetables. Features include three 1-inch stainless steel spikes that securely grasp meats and vegetables, and a two p...[More Information]
    
    
41. DELTA 30MM LIGHT CARBON PYLON & DELTA 30MM HEAVY CARBON PYLON The Delta 30mm Light Carbon Pylon and Delta 30mm Heavy Carbon Pylon are below-knee prothesis components designed for use by individuals with lower extremity amputation. These carbon pylons are used with the Pyramid Plus transtibial system. DIMENSIONS: Diameter is 30 millimeters and the length is 12, 24, or 36 inches. CAPACITY: The capacity of the light carbon pylon is 195 pounds with low activity or 155 pounds with moderate activity. The capacity of the heavy carbon pylon is 250 pounds with low ...[More Information]
    
    
42. DIY DEVICE TO ASSIST WITH GETTING DRESSED -------- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself assistive device for individuals with arthritis, recovering from surgery, and/or limited flexibility to dress themselves. Step 1: Use duct tape to fasten the wood block to the pole. Attach the wood block about 2 inches from the end of the pole and secure the block with tape at the top and bottom. Ensure the block is sturdy and unlikely to move. Duct tape makes this project quick and easy to complete without drilling any ...[More Information]
    
    
43. DIY PLASTIC SODA BOTTLE PROSTHESIS -------- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself below-the-elbow prosthetic device suitable for light-duty activities for individuals with arm amputation in low-income countries. This technique is intended for use by trained prosthetists, it is intended to be performed only using a plaster cast of the residual limb. Step 1: Remove the bottom of the bottle and place over the plaster model. Then apply heat to the lower portion to form the trimline. Step 2: Heat the bottl...[More Information]
    
    
44. DRAGON DICTATE FOR MAC Dragon Dictate for Mac is a voice input and voice output program designed for use by individuals with spinal cord injury or upper extremity, vision, or learning disabilities. This voice recognition software allows hand-free operation of Apple Macintosh personal computers. The system allows users to speak at their normal pace and control applications by using voice commands to initiate any program or action within a program, to move the mouse cursor and click anywhere on the screen, or to place t...[More Information]
    
    
45. DRAGON NATURALLYSPEAKING Dragon NaturallySpeaking is a voice input and voice output program designed for use by individuals with spinal cord injury or upper extremity, vision, or learning disabilities. This voice recognition system enables hands-free operation of personal computers and permits users to speak at their normal pace. The program also permits hands-free mouse operation using MouseGrid technology. Users can create, move, edit, and format text by voice command in virtually all Windows applications, including w...[More Information]
    
    
46. EASY OPEN VIAL The Easy Open Vial is an easy open medicine bottle for use by individuals with upper extremity disabilities, arthritis, or grasping disabilities and by upper extremity amputees. This plastic bottle and its cap are a single piece with the bottle and top portions connected by a durable and flexible plastic tab. The Easy Open Vial's 1-piece construction is intended to prevent lost caps. To open the bottle, a user squeeze the top sides where indicated by arrows on the cap and the lid pops open. Al...[More Information]
    
    
47. ENAMOR FOOD PREPARATION AID -------- PROTOTYPE --------- PURPOSE: To design a prototype of food preparation device for individuals with upper extremity disabilities or amputation or other conditions that limit them to use of only one arm or hand. The Enamor (an anagram of “one arm”) allows a person with use of only one arm the opportunity to expand his or her cooking skills by facilitating food preparation. Enamor is a simple and easily cleaned kit that consists of both vegetable and meat cutting units that attach tightly ...[More Information]
    
    
48. EYE-TRACKING ELECTRONIC TABLET -------- PROTOTYPE --------- PURPOSE: To create a prototype of an affordable eye-tracking electronic tablet computer for individuals with disabilities. Eye-tracking technology and software packages can be prohibitively expensive. Engineering students at Brigham Young University in partnership with EyeTech Digital Systems developed a tablet computer that can be controlled with a person’s eye movements. The prototype is projected to cost under $1,500. SYSTEM REQUIREMENTS: Windows 7. DIMENSIONS (L...[More Information]
    
    
49. EYECAN -------- PROTOTYPE --------- PURPOSE: To design a prototype of an eye-controlled mouse for individuals with upper extremity disabilities or who are upper extremity amputees. EyeCAN is a eye controlled input system mounted on a pair of glasses that is capable of tracking the user’s eye movement and translating those movements to a cursor on a computer display. AUTHOR: Edwin Kee. TITLE: Samsung eyeCAN mouse for disabled folk. WEBSITE: Ubergizmo. REF: http://www.ubergizmo.com/2012/02/samsung-eyecan...[More Information]
    
    
50. EYEGUIDE ASSIST EyeGuide Assist is an eye-controlled input system designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. The system includes a headset that mounts a small camera in front of the user's face to track eye movement, a receiver that connects via USB to the computer to transmit the eye movements to the computer, and software. Future software upgrades are included. The system supports three built-in methods to click on links, type, or issue other comma...[More Information]
    
    
51. EYEGUIDE EYE TRACKER The EyeGuide Eye Tracker is an eye-controlled input system designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. The system includes a headset that mounts a small camera with a wireless transmitter in front of the user's face to track eye movement, a wireless receiver that connects via USB to the computer to transmit the eye movements to the computer, and software. The software allows the user to calibrate the system to lighting conditions and c...[More Information]
    
    
52. EYETECH TM2 EYE TRACKER The EyeTech TM2 eye tracker is an eye-controlled input system designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This unit tracks one or both eyes with video infrared illumination, and is accurate to approximately one degree. It can be used with communication software, to surf the web, to send email, or to do anything a handheld mouse can do. For laptop computer installation, two infrared lights are mounted on the side and a camera sits on th...[More Information]
    
    
53. EYETECH TM4 The EyeTech TM4 is an eye controlled input system designed for use by individuals with upper extremity, neurological or severe physical disabilities or spinal cord injury. The system comes with Quick Glance software. The TM4 unit tracks one or both eyes using dark pupil, single or binocular video tracking with infrared illumination, accurate to 0.5 degree. The standard data rate is 30 frames per second with 1, 5, 9, or 16 available calibration points. Typical operating distance of head motion (h...[More Information]
    
    
54. EYETECH TM4 MINI The EyeTech TM4 Mini is an eye controlled input system designed for use by individuals with neurological, upper extremity or severe physical disabilities or spinal cord injury. The system comes with Quick Glance software. This unit tracks one or both eyes using dark pupil, single or binocular video tracking with infrared illumination, accurate to 0.5 degree. Its standard data rate is over 80 frames per second with 1, 5, 9, or 16 available calibration points. Typical operating distance of head mo...[More Information]
    
    
55. EYETECH VISION TRACKER VT1 The EyeTech Vision Tracker VT1 is an eye controlled input system designed for use by individuals with upper extremity, neurological or severe physical disabilities or spinal cord injury. The system comes with Quick Glance software. This unit tracks one or both eyes using dark pupil, single or binocular video tracking with infrared illumination, accurate to 0.5 degree. Standard data rate is 55 frames per second with 1, 5, 9, or 16 available calibration points. Typical operating distance of head m...[More Information]
    
    
56. FILLET BOARD The Fillet Board is a cutting and filleting board designed for individuals with grasping and upper extremity disabilities, one hand and upper extremity amputation. The board in made of aluminum plate and has a specially designed clamp on one side that will hold a catfish or flat fish in place while the user fillets it using one hand....[More Information]
    
    
57. FLEX-FOOT MODULAR III The Flex-Foot Modular III is a prosthetic foot designed for use by individuals with lower extremity amputation. This lightweight prosthesis is made of 100 percent carbon fiber, and provides 95 percent energy storage and return. The prosthesis is available with a low heel or high heel. SIZES: Available in sizes 22 to 30, categories 1 to 9. DIMENSIONS: Heel height is 3/8 or 0.75 inch. This prosthetic requires 9 inches of clearance from the ground to the distal end of the socket. CAPACITY: 365 poun...[More Information]
    
    
58. FLIP LACER Flip Lacer is a shoe lacing aid designed for use by individuals with upper extremity disabilities or amputation. This device allows the user to pull laces tight with one hand. This self-locking plastic device has no moving parts and interlaces with standard lace up shoes. Shoes can be opened wide to slip feet in, then the device can be used to pull the laces tight and tie the final knot. The device has a locking position for small children and a relaxed mode for relaxing laces for comfort. COLOR...[More Information]
    
    
59. FOREARM CRUTCHES --- CUSTOM ADAPTATION --- PURPOSE: To provide heavy-duty forearm crutches for an active individual with a lower leg amputation. The user was not able to find crutches that were strong enough and still provided the appropriate handgrip. The solution was for her hysband to custom-build crutches using the base purchased in Australia, custom-made arm cuffs, and handgrips purchased from Holland. When the pin holding the arm cuffs in place began to wear, the arm cuffs loosened. Over time the user also...[More Information]
    
    
60. GERIATRIC EXERCISE RESOURCE LIBRARY The Geriatric Exercise Resource Library is an exercise plan program designed for use by occupational or physical therapists. The library contains 457 professionally illustrated exercises and 31 tip sheets, which the therapist can use to create individualized exercise plans for seniors. Exercise categories include Orthopedic (neck, hand, wrist, elbow, back, knee, shoulder, hip, ankle, foot, thoracic); Mobility (sitting, balance, gait, sitting to standing); Health Promotion (circulation, flexibili...[More Information]
    
    
61. GORDON PEELER AND CLAMP (MODEL 09-109-6296) The Gordon Peeler and Clamp, model 09-109-6296, is a vegetable peeler and cutting aid designed for use by individuals with hemiplegia or upper extremity emputation. The unit clamps to a table or worktop and enables fruit and vegetables to be peeled using only one hand. Clamped to the work surface by a sliding mechanism, the hardened, swivelling blade is slotted into the top. It is operated by holding the vegetable and pushing it over the blade, away from the user. The peelings then drop onto a p...[More Information]
    
    
62. GROOMSTIK The Groomstik is a clamp for an ironing board designed for use by people with upper extremity and grasping disabilities, people with use of only one hand and upper extremity amputees. The Groomstik consists of soft gripping surfaces with a curved plastic handle and two U-shaped pieces, one on each end, that attach to each side of an iron board. It can be fastened to an ironing board with one hand. After placing a piece of clothing (or another fabric item such as a table cloth or sheet) on an iro...[More Information]
    
    
63. HALF KEYBOARD The Half Keyboard is a compact one-handed keyboard designed for use by individuals with upper extremity amputation, hand injury, or who have had a stroke. This keyboard allows the user to touch type with one hand, using existing typing skills. The user places a hand on the keyboard, in the standard position. The letters under the hand are exactly the same as on a standard keyboard. To get the other half of the keyboard, the user holds down the space bar. To type a space, the user taps the space ...[More Information]
    
    
64. HANDS FREE TOOL CHANGING STATION (MODEL RCH06-0N2) The Hands Free Tool Changing Station, model RCH06-0N2, is a prosthetic accessory and terminal device changing station designed for use by individuals with upper extremity amputation who use hand prostheses. This unit enables the user to change upper extremity prosthetic terminal devices without the use of hands. The unit has three Acidel Delran tool holders made of 316 stainless steel mounted on a single base. DIMENSIONS: Base is 7.88 x 8.38 inches; tool holders are 2 inches tall....[More Information]
    
    
65. HEAVY DUTY PASSIVE HOOK (MODEL PH02-0N2) The Heavy Duty Passive Hook, model PH02-0N2, is a terminal device designed for use by individuals with upper extremity amputation. This terminal device helps the user to work out on an exercise machine. It attaches to an N-Abler II or Wrist Unit with 0.5-inch 20 female threads. It comes as a single unit in one standard size. The hook is a plastic coated 0.5-inch 316 stainless steel bar, connected to a standard N-Abler shank or a 0.5-inch 20 threaded shank of 316 stainless steel....[More Information]
    
    
66. HOMEMADE LEG PROSTHESIS -------- PROTOTYPE --------- PURPOSE: To create a custom prototype of homemade leg prosthesis for an Afghan boy who lost both legs due to an improvised explosive device (IED). A team of U.S. Army soldiers developed a custom prototype for an eight-year-old boy who lost both legs, with the idea that locals should be able to make their own prostheses so that people injured by mines and bombs can get on their feet quickly, without having to wait for a distant charity to help. The prototype consisted...[More Information]
    
    
67. I-LIMB HAND The i-LIMB Hand is a myoelectric prosthetic hand designed for use by individuals with upper extremity disabilities and hand amputees. The i-LIMB Hand can closely reflect the grasping action of a human hand through the articulating fingers able to close tightly around objects. Built-in stall detection tells each individual finger when it has sufficient grip on an object and, therefore, when to stop powering. Individual fingers lock into position until the user triggers an open signal through a mu...[More Information]
    
    
68. I-LIMB PULSE The i-LIMB Pulse is a myoelectric prosthetic hand designed for use by individuals with upper extremity disabilities and hand amputees. The i-LIMB Pulse features five articulating digits that closely reflect the grasping action of a human hand. It includes BioSim, a software toolset for clinical practitioners that features a selection of various control strategies such as dual- and single-site electrode options and real-time assessment of the user's myoelectric impulses. BioSim also enables and d...[More Information]
    
    
69. IBM VIAVOICE SPEECH RECOGNITION SDK The IBM ViaVoice Speech Recognition SDK (Software Developers Kit) is a voice output and software authoring program designed for use by software developers to create software accessible to individuals who are blind or have low vision or upper extremity or severe physical disabilities or spinal cord injury. This kit contains documentation, samples, and tools to help the developer to speech enable applications using IBM ViaVoice dictation and/or command & control Runtimes. This large vocabulary spe...[More Information]
    
    
70. IMPULSE FOOT The Impulse Foot is a prosthetic foot designed for use by individuals with lower extremity amputation. The foot consists of a composite foot plate attached to a recessed Kevlar/nylon keel, and can be used for endoskeletal, exoskeletal, or Symes applications. It is available with five levels of toe resistance (very low, low, regular, high, or very high), and comes with a shaped foam ankle and three heel inserts (one each with soft, medium, and firm density). OPTIONS: Titanium foot pyramid; multia...[More Information]
    
    
71. INCASE MAGAZINE JACKET FOR IPAD 2 The Incase Magazine Jacket for iPad 2 is a stand for a tablet computer designed for use by individuals with use of only one hand or grasping or upper extremity disabilities. The hardshell case protects the iPad 2’s back and sides while the front lap with rubberized exterior keeps the screen safe from scratches. The jacket can be converted into a stand with two viewing angles and one typing angle when the screen cover is folded back. Other features include snap-on attachment, secure elastic band ...[More Information]
    
    
72. JAR & BOTTLE HOLDER (MODEL HA-4290) The Jar & Bottle Holder, HA-4290, is a jar and bottle holder and opener designed for use by individuals with use of one hand, arthritis, or upper extremity disabilities. This device sits over the edge of a counter and the jar or bottle is placed in its V section. The sliding section is then pushed in with the hip or stomach, leaving the hand(s) free to remove the lid....[More Information]
    
    
73. KEYBOARDING BY ABILITY Keyboarding by Ability is a typing instruction program designed to teach keyboarding skills at employable speeds using a touch system to people who have use of only one hand or who have use of 3 or less fingers on one hand. This program utilizes a unique progressive learning system (which includes visual cues and human voice), allowing the student to learn by building upon his or her progress. Each lesson is presented in an easy step-by-step format. The first lesson shows a full visually-cued ke...[More Information]
    
    
74. KNEE WALKER (MODEL 780) The Knee Walker, model 780, is a wheeled walker designed for use by individuals with walking, balance, or foot disabilities. This walker provides support for one leg and allows the other to be used freely. This walker features a lever brake, tool-free height adjustment, tool-free left to right/right to left leg adjustment and four wheels designed for indoor or outdoor use. DIMENSIONS (LxW): 29 x 14.5 inches. The knee pad is 14.5 x 7.5 inches. The handle height is adjustable from 33 to 41 inches,...[More Information]
    
    
75. LARGE SCOOP BOWL (MODEL HA-4248) The Large Scoop Bowl, model HA-4248, is a scoop bowl designed for use by individuals with use of one hand, stroke, or upper extremity or neurological disabilities. The large molded side to this bowl accommodates individuals who have difficulty getting food on the utensils, and a non-slip suction cup to keep the bowl in place. DIMENSIONS: Bowl is 78 millimeters high and 150 millimeters in diameter. WEIGHT: 110 grams....[More Information]
    
    
76. LAST STRAW The Last Straw is a straw holder designed for use by individuals with grasping disabilities, upper extremity disabilities or amputation, spinal cord injury, or cerebral palsy. It includes a modular positioning hose, which attaches to the back of any seating system, using a quick release mini-wedge mounting system, and a removeable tube, which functions as the straw. The tube is fed through the modular hose which positions it in front of the user while the other end (which can be cut to length) i...[More Information]
    
    
77. MANTIS STAND FOR IPAD & IPAD 2 The Mantis Stand for iPad and iPad 2 is a stand for a tablet computer designed for use by individuals with use of only one hand or grasping or upper extremity disabilities. The system is made of aluminum with anodized finish and can be used on a flat surface. The stand features 360-degree rotation from portrait to landscape, 360-degree swivel base, 90-degree tilt, quick cam release, and a security screw. The stand can also be used with Apple iPad Smart Cover. ...[More Information]
    
    
78. MATIAS 508 KEYBOARD The Matia 508 Keyboard is a one-hand keyboard designed for use by individuals with upper extremity amputation, stroke, or hand injury. This full-size keyboard allows both one-handed and two-handed typing. The user can touch-type with the left hand, the right hand, or both hands. The keys are built on rubber dome keyswitches that provide a quiet tactile feel, with enough resistance to hold the weight of the user's hands and reduce long-term fatigue. The user places a hand where it would normally ...[More Information]
    
    
79. MEN'S CASUAL OXFORD SHIRT The Men's Casual Oxford Shirt is a men's shirt designed for use by men with temporary or permanent upper extremity disabilities or amputation. The left and/or right sleeve is custom modified to accommodate a brace, cast, compression wrap, or prosthesis. Made of 60 percent cotton and 40 percent polyester, this shirt has long sleeves with dual sleeve lengths, two- button adjustable cuffs, back box pleat, and left chest pocket. SIZES: Regular sizes are small, medium, large, extra large, 2X-large, a...[More Information]
    
    
80. MEN'S DENIM PANTS The Men's Denim Pants are men's jeans designed for use by men with temporary or permanent lower extremity disabilities or amputation. The left and/or right leg is custom modified to accommodate a brace, cast, compression wrap, or prosthesis. The fabric is 100 percent cotton. SIZES: 28 through 58 inch waist in 2-inch increments. COLOR: Bleached or stone-washed blue....[More Information]
    
    
81. MEN'S PLEATED COTTON PANTS The Men's Pleated Cotton Pants are men's trousers designed for use by men with temporary or permanent lower extremity disabilities or amputation. The left and/or right leg is custom modified to accommodate a brace, cast, compression wrap, or prosthesis. These trousers have a pleated front with button closure and a brass zipper, two front pockets, two back pockets, full-cut straight legs, a Ban-Fol waistband. These pants are made of 8.0-ounce weight, machine washable, 100 percent cotton. SIZES: W...[More Information]
    
    
82. MINI-KEYBOARD WITH KEYGUARD (MODEL MKK-100) The Mini-Keyboard with Keyguard, model MKK-100, is a wireless mini keyboard designed for use by individuals who type with a single finger or a pointer. This keyboard connects to a computer using a wireless Bluetooth connection. The small size of the moisture-resistant keyboard reduces the distance the user has to reach to access all the keys. The keyguard fits between the keys and prevents simultaneously striking two keys next to each other. The keyguard is slightly taller than the keys to allow...[More Information]
    
    
83. MJM SHOWER CHAIR (MODEL 118-3-A) The MJM Shower chair, model 118-3-A, is designed for use by individuals with uni-lateral or bi-lateral below the knee amputation. FRAME (HxWxD): 40 x 22 x 18 inches. The frame is made of PVC plastic. SEAT: Deluxe elongated open front seat with padded elevated leg extension. The seat height is 21 inches. UPHOLSTERY: Water resistant vinyl mesh cover on backrest. CASTERS: 3-inch threaded stem casters. CAPACITY: 300 pounds. ...[More Information]
    
    
84. MJM SHOWER CHAIR (MODEL 118-3-A) The MJM Shower chair, model 118-3-A, is designed for use by individuals with uni-lateral or bi-lateral below the knee amputation. This chair features a PVC plastic frame; a padded, elevated leg extension; an elongated, open-front toilet seat; and four threaded-stem casters. The backrest has water- resistent vinyl cloth upholstery. DIMENSIONS(HxWxD): 40 x 22 x 18 inches. The seat height is 21 inches. The leg extension is 15 inches. The casters are 3 inches in diameter. CAPACITY: 300 pounds....[More Information]
    
    
85. MJM SHOWER CHAIR (MODEL 118-3-AF) The MJM Shower chair, model 118-3-AF, is designed for use by individuals with uni-lateral or bi-lateral below the knee amputation. The chair, made from PVC plastic, has drain holes and a flat stock seat that fully supports the buttocks. The backrest is covered in water- resistant vinyl mesh upholstery. A padded elevated leg extension is standard. The chair is equipped with four threaded-stem casters. DIMENSIONS(HxWxD): 40 x 22 x 18 inches. The seat height is 21 inches. The leg extension is 15 in...[More Information]
    
    
86. MONOMANO CYCLING CONTROL SYSTEM The MonoMano Cycling Control System are adapted tricycle handlebars intended for upper extremity amputees and others who have the use of only one hand, including stroke survivors and people with brain injury or arthritis. This handlebar is can be attached to any recumbent trike with a U-shaped handlebar that has a horizontal support beam. It attaches to the tricycle handlebar's horizontal support and extends back toward the trike's seat. The design enables a person to steer the tricycle comforta...[More Information]
    
    
87. MONOMANO CYCLING SYSTEM The MonoMano Cycling System is a leg-propelled adult tricycle with adapted tricycle handlebars intended for upper extremity amputees and others who have the use of only one hand, including stroke survivors and people with brain injury or arthritis. This system includes a Sun Bicycles EZ-3 recumbent tricycle with the MonoMano Handlebar (see separate entry) attached to the horizontal support beam in the center of the trike's standard U-shaped handlebar. The design of the MonoMano Handlebar enables...[More Information]
    
    
88. MY SPOON My Spoon is a powered feeder designed for use by individuals with eating disabilities, spinal cord injury, upper extremity disabilities, or upper extremity amputation. This device allows users to eat most types of everyday food with minimal help from a caregiver. The user sits upright to be fed. A base unit sits on the table next to a dish with four comparments, and an arm raises food to the user's mouth. The device can operate in manual, semi-automatic, or automatic modes, with a joystick, butt...[More Information]
    
    
89. MYOBOY (MODEL 757M11) MyoBoy, model 757M11, is an assessment and training system designed for use by individuals with upper extremity amputation who are being fitted for an Otto Bock myoelectric prosthetic hand (see entry). The system enables a prosthetist to conduct realistic tests of muscle tension and gather data that can be used to adjust the electrodes on the myoelectric hand. The system documents the individual's muscle signal strength so the prosthetist can track results and print data sheets. The included My...[More Information]
    
    
90. N-ABLER I The N-Abler I is a terminal device for an upper extremity prosthetic designed to enable individuals with upper extremity amputation to utilize tools and utensils. Designed for use by stronger individuals with unilateral below the elbow amputation, this device is made of anodized aircraft aluminum and fits standard wrist units. Features include 360-degree rotation, 60-degree range of motion, quick-release spring-loaded friction quick disconnect. OPTIONS: Attachable cutlery, kitchen tools, gardeni...[More Information]
    
    
91. N-ABLER II The N-Abler II is a terminal device for an upper extremity prosthetic designed to enable individuals with upper extremity amputation to utilize tools and utensils. This device is made of anodized aircraft aluminum and fits standard wrist units. This unit can also be used with the N-Abler III Wrist/Hand Orthotic (see entry) by individuals without an amputation who have hand wealness or disabilities. Features include 360-degree rotation, 60-degree range of motion, quick-release positive locking q...[More Information]
    
    
92. N-ABLER III WRIST / HAND ORTHOTIC (W.H.O.) The N-Abler III Wrist/Hand Orthotic (W.H.O.) is a hand orthosis designed to enable individuals with upper extremity amputation or disability to utilize tools and utensils. Available in a soft model or a carbon fiber model, this device can be used with the N-Abler II (not included; see entry) by individuakls with prosthetics or by individuals without prosthetics. OPTIONS: Attachable cutlery, kitchen tools, eating utensils, gardening tools, sports equipment (hunting, fishing, golf, and weightlift...[More Information]
    
    
93. ONE-WAY DRINKING STRAWS (MODEL HA-4266) One-Way Drinking Straws, model HA-4266, are drinking straws with valves designed for use by individuals with swallowing disabilities. These straws have one-way valves which stay filled with fluid even after the straw is removed from the user's lips. The valves reduce the effort required to drink and the amount of air ingested. The straws have adjustable clips to secure the straw on cups or glasses. DIMENSIONS: Each package contains one 10-inch and one 7-inch straw. WEIGHT: 9 grams....[More Information]
    
    
94. ONYX FOOT The Onyx Foot is a prosthetic foot designed for use by individuals with lower extremity amputation. This dynamic pylon, multi-axial foot has 4 degrees of plantar-dorsiflexion angle alignment, with adjustable stride control to fine-tune foot stiffness from heel strike to heel off. CAPACITY: 275 pounds. COLOR: Caucasian, brown, or jet black foot shell. WARRANTY: 3 years....[More Information]
    
    
95. OTTO BOCK ELECTRIC WRIST ROTATOR (MODEL 10S17) The Otto Bock Electric Wrist Rotator, model 10S17, is an electronic wrist rotator designed for use by individuals with upper extremity amputation. This device provides electrical rotation of the Otto Bock System Electric Hand or Greifer. The 6- or 7.2-volt device is controlled electrically with the model 13E205 MyoRotronic controller (see separate entry)....[More Information]
    
    
96. OTTO BOCK MYOROTRONIC (MODEL 13E205) The Otto Bock MyoRotronic, model 13E205, is a myoelectronic wrist controller designed for use by individuals with upper extremity amputation. This device is for electrical control of the model 10S17 Electric Wrist Rotator with 13E183 Buzzer. It enables electrical pronation and supination as well as opening and closing of the hand with one or two 13E200/13E202/13E68 MyoBock Electrodes or a combination of one 13E200/13E202 Electrode and a 9X50/9X52 Linear Transducer. The unit has five different pr...[More Information]
    
    
97. PARK BRAKE EXTENSION (MODEL 105) The Park Brake Extension, model 105, is an extension lever that bolts to a foot operated parking brake in order to operate the brake by hand. The lever can be installed at various angles by adjusting the position in relation to the attachment bolt. ...[More Information]
    
    
98. PATHFINDER II FOOT The Pathfinder II Foot is a prosthetic foot designed for use by individuals with lower extremity amputation. The foot has a toe spring, a foot plate, and a pneumatic heel spring, all connected in a triangular configuration to provide shock absorption during heel strike without diminishing the energy return of the toe spring. The foot is for moderate to high activity (U.S. levels 3 and 4), and comes with a high activity foot shell, Spectra sock, proximal adapter, hand pump, removal tool, and valv...[More Information]
    
    
99. PLASTIC HANDLE BUTTON HOOK WITH ZIPPER PULL (MODEL 2038) The Plastic Handle Button Hook with Zipper Pull, model 2038, is a combination button aid and zipper pull designed for use by individuals with grasping or fine motor disabilities, arthritis, limited hand dexterity or the use of only one hand. Designed to assist people with dressing by aiding with pulling zippers and fastening buttons, this device features a plastic handle with a button hook one end. At the opposite end is a slim metal hook that slips into the hole on a zipper tab to pull the zip...[More Information]
    
    
100. PLASTIC PLATE GUARD (MODEL HA-4250) The Plastic Plate Guard, model HA-4250, is a food guard designed for use by individuals with use of one hand, stroke, or neurological disabilities or spinal cord injury. This removable plastic plate guard fits tightly around the rim of any circular plate 200 to 300 millimeters in diameter. The edge is curved to help keep food on the plate. DIMENSIONS (HxL): 42 x 150 millimeters. WEIGHT: 33 grams....[More Information]
     
     
101. POWER KNEE The Power Knee is a powered bionic knee prosthesis designed for use by individuals with above-knee amputation. This bionic knee replaces concentric muscle activity of the quadriceps to bend and straighten the knee. Working as an integrated extension of its user, it synchronizes motion with that of the sound leg. When walking on level ground, the user is gently propelled forward, allowing greater distances to be covered without tiring, while pelvic rotation is enhanced for a more natural gait. On...[More Information]
     
     
102. POWERFISH'N PRO PF-100 The PowerFish'n Pro PF-100 is an electric fishing reel designed for use by people with upper extremity disabilities or use of one hand. It consists of a Shakespeare spinning real fitted with an electric motor. The reel can also be hand cranked to retrieve the line. The PowerFish'n Pro has a graphite body with stainless steel guides, and it features a multi-disc drag system and an instant anti-reverse function. The reel is mounted on the bottom of the fishing pole, and there is a trigger-like on-...[More Information]
     
     
103. PRODIGITS ProDigits are myoelectric prosthetic fingers designed for use by individuals with upper extremity disabilities and partial hand amputees. ProDigit fingers can be used to replace all five fingers (including the thumb) or any set of consecutive fingers. The fingers are mounted on a custom molded base that fits over the hand. Each finger has an individually powered motor and works with other fingers (natural and prosthetic) to produce a grasping action that closely reflects that of the human hand. ...[More Information]
     
     
104. PROPRIO FOOT The Proprio Foot is a bionic prosthetic foot designed for use by individuals with lower extremity amputation. This intelligent foot module for transtibial amputees provides a more balanced and symmetric gait as it responds to changing terrain, stairs, and slopes with automatic ankle flexion. Accelerometer technology tracks the path of the ankle through space, timing gait characteristics and events, including heel strike and toe off. For each stride, the device constructs its path by continuousl...[More Information]
     
     
105. PYRAMID PERFECT SYSTEM The Pyramid Perfect System is an endoskeletal pylon and ankle designed for use by individuals with lower extremity amputation. The system is machined from solid titanium billet with non-corrosive fasteners, and allows the use of a larger diameter clamping screw to prevent stripping or breaking. Components include a tube clamp with fixed carbon or aluminum pylon, a demountable tube clamp, and a Sach foot adapter. OPTIONS: Components can be purchased separately. Demountable Tube Clamp, $77.95; Tub...[More Information]
     
     
106. QICARE QiCare is a voice- or switch-controlled page turner designed for use by invidulas with mobility or severe physical disabilities. To use, the magazine or periodical is placed on the unit's reading surface and fixed in place with the built-in fastener. When activated by signal, this page-turning system uses a gentle movement to leaf through the pages, either forwards or backwards. The unit can be operated using a variety of controls, including voice control; Piko dual switch; finger switch; or pro...[More Information]
     
     
107. QUADMOUSE QuadMouse is a chin, lip, or tongue switch designed for use by individuals with severe physical or neurological disabilities, upper extremity amputation, or spinal cord injury. This switch allows access to a computer or other device with a 0.25-inch movement of chin, lips, or tongue. OPTIONS: 3rd Hand clamp, surface, or flexarm mount; mouthpiece variety pack; clamp base for bed or desk or wheelchair armrest; voice control interactive gaming software; bite switch, dual pushbutton switches, sip & ...[More Information]
     
     
108. QUICK GLANCE 2 Quick Glance 2 is an eye-controlled input system designed for use by individuals with upper extremity amputation or disabilities, severe physical or neurological disabilities, or spinal cord injury. This mouse replacement device allows the user to place a mouse pointer anywhere on a computer screen by looking at the desired location. The user's eye must be kept in the camera's field of view, a range of about 10 by 10 or 6 by 6 centimeters, depending on the model selected. Clicking can be accompl...[More Information]
     
     
109. RAM LEG KNEEBOARD MOUNT FOR THE APPLE IPAD (MODEL RAM-BM-L1-SB1-AP8U) The RAM Leg Kneeboard Mount for the Apple iPad, model RAM-BM-L1-SB1-AP8U, is a stand for a tablet computer designed for use by individuals with use of only one hand or upper extremity disabilities. This mount allows a person to secure an Apple iPad to his or her leg for use while sitting. The system includes a high strength composite cradle for the iPad, a socket system, a leg base and and two straps for tight support. The socket system allows the user to rotate the iPad for viewing in portrait ...[More Information]
     
     
110. RAM LEG KNEEBOARD MOUNT FOR THE SAMSUNG GALAXY AND AMAZON KINDLE FIRE The RAM Leg Kneeboard Mount for the Samsung Galaxy and Amazon Kindle Fire, model RAM-BM-L1-SB1-SAM4U, is a stand for a tablet computer designed for use by individuals with use of only one hand or upper extremity disabilities. This mount allows a person to secure a Galaxy or Kindle Fire to his or her leg for use while sitting. The system includes a high strength composite cradle for the Galaxy or Kindle Fire, a socket system, a leg base and and two leg straps for tight support. The socket system ...[More Information]
     
     
111. RENEGADE & RENEGADE LP Renegade and Renegade LP (Low Profile) are prosthetic feet designed for use by individuals with lower extremity amputation. This foot prosthesis has a carbon-fiber Z-shaped heel for vertical shock deflection, with a full-length sole plate and an integral male pyramid connector. Through active tibial progression, energy is absorbed and redirected, helping the user walk or run more smoothly. The foot is available in stiffness categories from 1 to 9. DIMENSIONS: Standard lengths are 22, 23, 24, 25,...[More Information]
     
     
112. RHEO KNEE The Rheo Knee is a knee prosthesis designed for use by individuals with lower extremity amputation. This knee has a microprocessor-controlled swing and stance for natural and efficient motion. High speed load cells accumulate information through the gait cycle, and this information is combined with data from the angle sensor to build up a profile of the user’s gait. Data from the sensors is received continually by a Dynamic Learning Matrix Algorithm (DLMA), which matches the live data input to...[More Information]
     
     
113. ROBO-TAR -------- PROTOTYPE --------- PURPOSE: To create a prototype of a device that allows individuals with fine motor skill or upper extremity disabilities to play the guitar using a series of foot pedals. Robo-tar is a device that attaches to the neck of a standard guitar and actuates chords electronically using a series of pedals. The Robo-tar allows individuals to play the guitar with only one hand (strumming) and the use of one foot to control the appropriate chords. It is intended to reduce the l...[More Information]
     
     
114. ROTH MOBELI BATH TUB SHORTENER (MODELS 14005206 & 14005207) The Roth Mobeli Bath Tub Shortener is a bathtub shortener designed for use by individuals with short stature or lower extremity amputation. This unit can be placed at any point in the tub to provide foot support, or it can be turned horizontally to function as a tray. Model 14005206 has two suction plates and can fit all bathtub types. Model 14005207 has three adjustable clip-on suction plates and can only be used in parallel bathtubs. The suction plates arranaged with two plates above, which sw...[More Information]
     
     
115. SAFETY BATH STRETCH WALK-IN BATHTUB The Safety Bath Stretch Walk In Bathtub is a bathtub designed for use by individuals with walking or balance disabilities. This fiberglass tub features a wide, outward-swinging door in the side with a low entry step to enable the user to enter the tub without climbing over the side. The door is available in a choice of right or left opening. Standard equipment includes an integral molded seat, trim boards, grab bar on the door, pop up drain with waste overflow, and external drain kit. OPTIONS: F...[More Information]
     
     
116. SCOOP DISH (MODEL HA-4249) The Scoop Dish, model HA-4249, is a scoop dish designed for use by individuals with use of one hand, who have had strokes, or who have upper extremity disabilities. The dish has a high back rim to accommodate individuals who have difficulty pushing food onto utensils. This dish also has a non-slip suction cup base to keep it in place while the user is eating. DIMENSIONS: 65 millimeters high x 303 millimeters in diameters. WEIGHT: 177 grams....[More Information]
     
     
117. SELFWIPE BATHROOM TOILET AID The SelfWipe Bathroom Toilet Aid is a toileting aid designed for use by individuals with arthritis or upper extremity disabilities. This device allows people with limited use of their hands and arms to function independently when using the toilet. The device has a handle at one end and a clamp at the other, and can be used and operated with one hand. When the user presses a button on top of the handle, the clamp opens. Toilet tissue is wrapped around the clamp, and when the button is released th...[More Information]
     
     
118. SENATOR PROSTHETIC FOOT The Senator Prosthetic Foot is a lightweight prosthetic foot designed for use by individuals with lower extremity amputation. This lightweight composite foot enables low to moderately active K3 level amputees to ambulate at varied speeds and participate in daily activities such as bicycling, golfing, hiking, and light jogging. The energy-returning foot facilitates a smooth stride so users can walk farther and faster using less energy. Simulated ankle motion provides a stable base of support thro...[More Information]
     
     
119. SENSORHAND SPEED SensorHand Speed is a myoelectric prosthetic hand designed for use by individuals with upper extremity amputation. The hand can be opened and closed at speeds from 15 to 300 millimeters per second. To keep held objects from slipping, an AutoGrasp feature monitors the hand's grip force and changes the grip as needed. AutoGrasp can also be turned off. The hand comes with either a Lamination Ring or a Quick Disconnect Wrist for terminal device changes. A slip-clutch allows the user to release the h...[More Information]
     
     
120. SINGLE-HANDED BIKE BRAKE LEVER The Single-Handed Bike Brake Lever is a one-hand dual brake lever designed for use by individuals with upper extremity amputation. This single brake lever operates both front and rear brakes simultaneously for safety and control. It fits standard diameter handlebars and mounts on the right or left side. It comes in road bike and mountain bike styles. One size fits both children’s and adult hands. COLOR: Silver....[More Information]
     
     
121. SMART PYRAMID & COMPAS Smart Pyramid and Compas together form a computerized gait analysis and alignment tool designed for use by individuals with lower extremity amputation. The system consist of hardware with embedded sensors (Smart Pyramid) that is integrated into the leg prosthesis, with an attached adaptor that uses Bluetooth to communicate wirelessly with automatic gait analysis software (Compas) on a personal computer (PC) or personal digital assistant (PDA). The adaptor attaches to any socket using the Euro fo...[More Information]
     
     
122. SOFTSTEP KEYWORX SoftStep KeyWorx is a foot operated mouse and keyboard system designed to allow computer access for individuals with upper extremity disabilities or carpal tunnel syndrome, or to reduce the risk of repetitive strain injury. This is a hardware and software bundle that translates up/down and left/right foot movements into control values, enabling the user to control the cursor, enter text, select programs, bring a browser window forward, scroll through folders and open documents, send out keystrok...[More Information]
     
     
123. SSR WITH MIC (MODEL SSR-100) The SSR (Supplemented Speech Recognition) with Mic, model SSR-100, is a voice input and word prediction program designed for use by individuals who have difficulty using speech recognition software because their speech or breathing may be unusual. The program integrates word prediction and speech recognition for users with speech that is dysarthric (difficult to understand) so significantly less typing is required to enter text. The package includes speech recognition software, a speech processi...[More Information]
     
     
124. TALKITMOUSEIT 2 TalkItMouseIt2 is a mouse emulator program designed for use by individuals with fine motor or upper extremity disabilities, repetitive motion injury, or upper extremity amputation. Used in conjunction with TalkItTypeIt voice input software (see separate entry), this program enables the user to perform mouse functions in any Windows application through voice input. The user says the name of objects on the screen, such as Window or Toolbar, and pop-up hints guide the user in positioning the pointe...[More Information]
     
     
125. TALKITTYPEIT 2 TalkItTypeIt2 is a voice input program designed for use by individuals who are blind or have repetitive strain injury, upper extremity disabilities, spinal cord injury, or upper extremity amputation. Using the Microsoft 6.1 Speech Recognition Engine, this program allows the user to dictate directly into virtually any Windows application, including Microsoft Word, Excel, Outlook and other email clients, AOL Chat and other instant messaging programs, Corel Word Perfect, and OpenOffice. Text can be...[More Information]
     
     
126. TALKPRO SP-1 COMPUTER HEADSET The TalkPro SP-1 Computer Headset is a headset for computer designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. This lightweight monaural speech recognition headset has a noise canceling microphone to support speech recognition. Its 270-degree swivel earpiece has a soft, cupped cushion for comfort and better sound. The unit is made of high-impact engineered plastic with a stainless steel adjustable headband and a flexible microphone boom th...[More Information]
     
     
127. TALKPRO SP-2 COMPUTER HEADSET The TalkPro SP-2 Computer Headset is a voice input computer interface designed for use by individuals with upper exremity or severe physical disabilities or spinal cord injury. This binaural headset has a noise canceling microphone to aid in speech recognition applications. Its 270-degree swivel earpiece has a soft, cupped cushion for comfort and better sound. The lightweight headset is made of high-impact engineered plastic with a stainless steel adjustable headband, and a flexible microphone b...[More Information]
     
     
128. TETRAZAP TetraZap is an adapted DVD player and television remote control designed for use by individuals with spinal cord injury or upper extremity amputation or disability. This universal remote controls TVs, VCRs, DVDs, and/or cable or satellite boxes. Dual mouth-operated joysticks enable users to control up to three TV entertainment devices. Users can turn on and off the TV, VCR, DVD, cable or satellite box, change channels, and control volume. Special macro functions can turn all units on or off at o...[More Information]
     
     
129. TORNADO BODY DRYER The Tornado Body Dryer is a body dryer designed for use by individuals with balance, mobility, or upper extremity disabilities, burns, arthritis, or amputation. This in-shower device is intended to dry the shower-taker or bather, head-to-toe, by blowing warm air on him or her instead of using a towel. The body dryer has two speed settings: low keeps the shower or bath area warm and high dries the user when she or he is finished showering or bathing. Because the maintenance-free unit swirls warm ...[More Information]
     
     
130. TRAILBLAZER MA FOOT The Trailblazer MA (Multiaxial Ankle) Foot is a prosthetic foot designed for use by individuals with lower extremity amputation. This foot prosthesis combines a composite foot with a high-activity multiaxial ankle. Ankle movement can be customized by use of a flexion ring over the neck of the ankle pyramid. The foot also comes with a high-activity foot shell with sole reinforcement, a Spectra sock, one of three heel spring options (soft, medium, or firm), toe springs, and three flexion rings. DI...[More Information]
     
     
131. TRANSCARPAL HAND DMC PLUS (MODEL 8E44) The Transcarpal Hand DMC (Dynamic Mode Control) Plus, model 8E44, is a myoelectric prosthetic hand designed for use by individuals with upper extremity disabilities. Grip speed is variable from 15 to 130 millimeters per second. The high maximum grip speed and the balance of grip force and speed allow the user to experience more physiological gripping. The control contains both the original DMC control and the DMC plus mode, which includes a virtual hand switch. After gripping once with maximum g...[More Information]
     
     
132. TRANSCRIPTION AID Transcription Aid is a text editor program designed for use to edit documents dictated using Dragon NaturallySpeaking Professional voice input program (see entry). After a document has been dictated and automatically transcribed by NaturallySpeaking, this text editor presents the text generated by NaturallySpeaking on screen while the recorded voice is played back, enabling the user to correct the small number of mistakes (approximately 2 to 3 percent) made by NaturallySpeaking. A foot pedal is ...[More Information]
     
     
133. TUBE SQUEEZER (MODEL HA-4211) The Tube Squeezer, model HA-4211, is a tube key and toothpaste dispenser designed for use by individuals with use of one hand. It has a thumb rotator screw to put prussure on toothpaste and similar tubes. DIMENSIONS: 55 millimeters diameter. WEIGHT: 27 grams....[More Information]
     
     
134. TUFFY DELUXE 867 (MODELS 867, 867E, 867N, & 867NE) The Tuffy Deluxe 867 is a folding manual wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 867 model, this wheelchair comes in narrow (models 867N and 867NE) versions. FRAME (HxLxW): 36 x 41 or 43 x 22.5 or 24.5 inches. The folded dimensions (LxW) are 31 x 10.5 inches. This chair has a triple chrome-plated steel folding frame with stainless steel side panels. Anti-tippers and ...[More Information]
     
     
135. TUFFY DELUXE 887 (MODELS 887, 887E, 887N, 887NE) The Tuffy Deluxe 887 is a folding adult manual wheelchair designed for use by shorter adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 887 model, this wheelchair comes in narrow (models 887N and 887NE) versions. FRAME (HxLxW): 34 x 41 or 43 x 22.5 or 24.5 inches. Triple chrome plated steel folding frame with stainless steel side panels. The folded dimensions (LxW) are 30.5 x 10.5 inches. Anti-tippers and an...[More Information]
     
     
136. TUFFY DELUXE STANDARD LIGHT 877 (MODELS 877, 877E, 877N, 877NE, 877W, & 877WE) The Tuffy Deluxe Standard Light 877 is a folding adult manual wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 877 model, this wheelchair comes in narrow (models 877N and 877NE) and wide (models 877W and 877WE) versions. FRAME (HxLxW): 36 x 41 or 43 x 24, 26 or 28 inches. The folded dimensions (LxW) are 31 x 11.5 inches. The chrome-plated folding frame has composite side ...[More Information]
     
     
137. TUFFY HEMI 897 (MODELS 897, 897E, 897N, 897NE, 897W, & 897WE) The Tuffy Hemi 897 is a heavy duty, folding manual wheelchair designed for use by short adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees and those who propel a wheelchair by foot. In addition to the standard 897 model, this wheelchair comes in narrow (models 897N and 897NE) and wide (models 897W and 897WE) versions. FRAME (HxLxW): 34 x 41 or 43 x 24, 26, or 28 inches. The folded dimensions (LxW) are 30 x 11.5 inches. The chrome-plated,...[More Information]
     
     
138. TUFFY WIDE HEMI 352 (MODELS 352, 352E, 352X, & 352XE) The Tuffy Wide Hemi 352 is a heavy duty, folding manual wheelchair designed for use by shorter, large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 352 model, this wheelchair comes in wide (models 352X and 352XE) versions. FRAME (HxLxW): 35.75 x 42 or 44 x 30 or 32 inches. The folded dimensions (LxW) are 32 x 12 inches. Triple chrome plated steel folding frame has stainless steel side panels. Double cro...[More Information]
     
     
139. TUFFY WIDE HEMI 356 (MODELS 356, 356E, 356X, & 356XE) The Tuffy Wide Hemi 356 is a heavy duty, folding manual wheelchair designed for use by shorter, large adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as wide amputees and those who propel a wheelchair by foot. In addition to the standard 356 model, this wheelchair comes in wide (356X and 356XE) versions. FRAME (HxLxW): 35.75 x 42 or 44 x 30 or 32 inches. The folded dimensions (LxW) are 34 x 12 inches. The triple chrome plated steel folding frame ...[More Information]
     
     
140. TUFFY WIDE SUPER HEMI 354 (MODELS 354, 354E, 354X, & 354XE) The Tuffy Wide Super Hemi 354 is a heavy-duty, folding manual wheelchair designed for use by shorter, large adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as wide amputees and those who propel a wheelchair by foot. In addition to the standard 354 model, this wheelchair comes in wide (354X and 354XE) versions. FRAME (HxLxW): 33.75 x 42 or 44 x 30 or 32 inches. The folded dimensions (LxW) are 32 x 12 inches. The triple chrome plated steel folding ...[More Information]
     
     
141. TUFFY WIDE SUPER HEMI 358 (MODELS 358, 358E, 358X, & 358SXE) The Tuffy Wide Super Hemi 358 is a heavy-duty, folding manual wheelchair designed for use by shorter, large adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as wide amputees and those who propel wheelchairs by foot. In addition to the standard 358 model, this wheelchair comes in wide (models 358X and 358SXE) versions. FRAME (HxLxW): 33.75 x 42 or 44 x 30 or 32 inches. The folded dimensions (LxW) are 34 x 12 inches. The triple chrome plated steel f...[More Information]
     
     
142. TURN SIGNAL ADAPTER (MODEL 106) The Turn Signal Adapter, model 106, is a right hand directional signal extension lever that allows the driver to operate the directional signal with the right hand. The device clamps to the base of the factory installed directional signal lever. Manufacturer recommends mounting the adapter to metal or polymers as some thin plastics may crack. The adapter will not interfere with normal operation. The Turn Signal Adapter will accommodate a turn signal base thickness of up to 0.75 inch in diameter....[More Information]
     
     
143. TURN SIGNAL LEVER - RIGHT HAND The Turn Signal Lever - Right Hand is a right hand directional signal extension lever designed for use by individuals with left hand or arm disabilities. Designed to allow drivers to operate the turn signals with the right hand instead of the left, this device attaches to the turn signal lever and crosses to the right side of the steering column. Installation includes screw mounting. ...[More Information]
     
     
144. ULTRA LATCH -------- PROTOTYPE --------- PURPOSE: To design a door handle that pushes or pulls to open an interior door making it possible for individuals with disabilities, small children, or anyone unable to use either or both hands to enter and exit through the doorway. The UltraLatch doesn’t twist or turn like traditional door handles. The user unlatches the door by pushing or pulling UltraLatch approximately .5 inches. Inspired by the auto gear shifter, the UltraLatch is designed to conform to the shap...[More Information]
     
     
145. UNIVERSAL OFFSET PYRAMID ADAPTER (MODELS UOPA-F & UOPA-M) The Universal Offset Pyramid Adapter is a foot adapter designed for use by individuals with lower extremity amputation. These titanium alloy adapters have a low profile and a standard Euro four-hole bolt pattern, with a female (model UOPA-F) or male (model UOPA-M) socket configuration. CAPACITY: Low activity level, 250 pounds; moderate activity level, 220 pounds; and high activity level, 185 pounds....[More Information]
     
     
146. UPLIFT STUMPREST PACK (MODEL SRPACK) The Uplift StumpRest Pack, model SRPACK, is an amputee leg support designed for use on wheelchairs by individuals with below-knee amputation. The StumpRest unit comprises a universal cross-frame drop-base with a moisture-proof ABS plastic top with retractable sliders that accommodate right, left, or dual amputations. The pack includes a choice of StumpRests (model SR 16, model SR 18, or model SR 20, one standard foam slider cushion, and two Versa Lock drop hook retainers (all components are also...[More Information]
     
     
147. VENTURE DELUXE 267 (MODEL 267, 267E, 267N, & 267NE) The Venture Deluxe 267 is a folding manual wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 267 model, this wheelchair comes in a narrow (models 267N and 267NE) version. FRAME (HxLxW): 36 x 41 or 43 x 22.5 or 24.5 inches. The folded dimensions (LxW) are 31 x 10.5 inches. The folding triple chrome plated frame has stainless steel side panels. Anti-tippers and an anti-folding d...[More Information]
     
     
148. VENTURE DELUXE 277 (MODEL 277, 277E, 277N, 277NE, 277W, & 277WE) The Venture Deluxe 277 is a folding manual wheelchair designed for use by adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 277 model, this wheelchair comes in narrow (models 277N and 277NE) and wide (models 277W and 277WE) versions. FRAME (HxLxW): 36 x 41 or 43 x 24, 26 or 28 inches. The folded dimensions (LxW) are 31 x 11.5 inches. The triple chrome plated frame has stainless steel side panels. Anti-tipper...[More Information]
     
     
149. VENTURE DUAL AXLE 287 (MODELS 287 & 287E) The Venture Dual Axle 287 is a folding adult manual wheelchair designed for use by adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. The dual axle position and adjustable height caster wheel housing allow the chair to be converted to hemi height. FRAME (HxLxW): 34 to 36 x 41 or 43 x 26 inches. The folded dimensions (LxW) are 31 x 11.5 inches. The triple chrome plated frame has composite side panels. Anti-tippers and an anti-folding dev...[More Information]
     
     
150. VENTURE HEMI LIGHT 687 (MODEL 687, 687E, 687N, & 687NE) The Venture Hemi Light 687 is a lightweight folding manual hemi wheelchair designed for use by adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees and those who propel a wheelchair by foot. In addition to the standard 687 model, this wheelchair comes in a narrow (models 687N and 687NE) version. FRAME (HxLxW): 36 x 41 or 43 x 22.5 or 24.5) inches. The chrome-plated frame has composite side panels. The folded dimensions (LxW) are 31 x 10.5 ...[More Information]
     
     
151. VENTURE HEMI LIGHT 697 (MODEL 697, 697E, 697N, 697NE, 697W, 697WE) The Venture Hemi Light 697 is a lightweight folding manual hemi wheelchair designed for use by adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 697 model, this wheelchair comes in narrow (697N and 697NE) and wide (697W and 697WE) versions. FRAME (HxLxW): 36 x 41 or 43 x 22.5, 24.5, or 26.5 inches. The folded dimensions (LxW) are 31 x 11.5 inches. The chrome-plated frame has composite side panels. Anti-tippe...[More Information]
     
     
152. VENTURE LIGHT 677 (MODEL 677, 677E, 677N, 677NE, 677W, 677WE) The Venture Light 677 is a lightweight folding manual wheelchair designed for use by adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 677 model, this wheelchair comes in narrow (models 677N and 677NE) and wide (models 677W and 677WE) versions. FRAME (HxLxW): 36 x 41 or 43 x 22.5, 24.5, or 26.5 inches. The folded dimensions (LxW) are 31 x 11.5 inches. The chrome-plated frame has composite side panels. Anti-t...[More Information]
     
     
153. WHEELCHAIR BUDDIES (MODEL WB1) The Wheelchair Buddies, model WB1, are a wheelchair carrier system for a hand-propelled tricycle for people with lower extremity or mobility disabilities or spinal cord injury or lower extremity amputees. The Wheelchair Buddies allow a person to attach a manual wheelchair to the back of a hand-propelled tricycle so that the user can ride the cycle while transporting the wheelchair for use at the cyclist's destination. A Wheelchair Buddies set consists of a carabiner clip, a nylon strap and two o...[More Information]
     
     
154. WHEELCHAIR BUDDIES (MODEL WB2) The Wheelchair Buddies, model WB2, are a wheelchair carrier system for a hand-propelled tricycle for people with lower extremity or mobility disabilities or spinal cord injury or lower extremity amputees. The Wheelchair Buddies allow a person to attach a manual wheelchair to the back of a hand-propelled tricycle so that the user can ride the cycle while transporting the wheelchair for use at the cyclist's destination. A Wheelchair Buddies set consists of a carabiner clip, a nylon strap and two o...[More Information]
     
     
155. X-FINGER The X-Finger is a mechanical prosthetic finger designed for use by individuals with upper extremity amputation. This body-powered finger articulates when the user moves the residual finger or an opposing finger. Its phalanges follow the natural bending pattern of a finger, allowing the user to operate the prosthesis using the same cognitive processes previously used to articulate the finger. All of the components of the assembly fit within the confines of a silicone finger sheath, which bends in...[More Information]
     
     

Page 1 of 1