Products are listed alphabetically.

Page 1 of 2    Next page »

1. 8-POINT OCCUPANT RESTRAINT SYSTEMS (MODELS FE505 & FE506) --- DISCONTINUED. (Verified 3/2013) RETAINED IN DATABASE FOR REFERENCE. --- The 8-Point Occupant Restraint Systems, models FE505 & FE506, are wheelchair restraining devices designed to offer maximum security and comfort while traveling in motorized vehicles or transportation systems that accommodate chair users. Both of these models are designed to meet Federal Motor Vehicle Safety Standards when properly installed and are engineered to adapt to a variety of installation requirements. The FE505 ...[More Information]
   
   
2. AEROQUIP WHEELCHAIR SECUREMENT SYSTEM (MODEL FF865) --- DISCONTINUED. (Verified 3/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Aeroquip Wheelchair Securement System, model FF865 series E/A, is a 4-point restraint system designed to fit most motorized wheelchairs. The front straps have a cam buckle and attach to the front vertical of the wheelchair frame. Rear assemblies have a ratchet buckle and attach to the back vertical of the wheelchair frame. The system attaches to the vehicle floor by Series A/E tracks (sold separately) installed in fr...[More Information]
   
   
3. AEROQUIP WHEELCHAIR SECUREMENT SYSTEM (MODEL FF867) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair restraint system series G four point. Three wheelchair straps: front assembly straps attach to wheelchair front vertical frame and front track. Back assembly has one strap that attaches to vertical frame above each wheel and then to track in two places. Break strength 2500 pounds per tie down leg. Series G track sold separately. Attendant required. Fits most motorized wheelchairs....[More Information]
   
   
4. BRAUN SLIDE BAR TIE DOWN RAIL MOUNT (MODEL 12346A) & FLOOR MOUNT (MODEL 12345A) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair restraint tie down system for bus or van. Base of restraint mounts on floor of vehicle or rail of seat (two different models). Pins of restraint hook around rear wheels of wheelchair to restrict movement. Pins attach by attendant or companion moving a single lever. Accommodates most standard or electric wheelchairs. Includes lap belt and hardware. Heavy gauge steel. Meets Federal motor vehicles safety standard 209....[More Information]
   
   
5. CAM LOCK. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Tie down wheelchair restraint. Base mounts to floor of vehicle and wrench like unit attaches to frame above foot rest of wheelchair. Releases with lever which requires enough physical strength to maneuver (probably equivalent amount to hand brake release)....[More Information]
   
   
6. CENTER MOUNTED WHEELCHAIR LOCKDOWN. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair restraint system. Steel plates with U bolt attach to floor on outer side of wheelchair casters. Long rod secured to U bolt screws into latch. Other end of latch has long hook that attaches over horizontal bar in front of brake system. Latch can be tightened. Easily used by individual in wheelchair. Needs to be readjusted for use with specific wheelchairs....[More Information]
   
   
7. CLAW, THE --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Tie down system provides restraint system for wheelchair. Base of restraint mounts on floor and hooks onto crossbar of chair to restrict forward or backward movement of wheelchair. Adapts to most standard or electric wheelchairs. For driver or passenger. Option for locating passenger between the front seats. Includes lap belt and mounting hardware. Made of plated steel or aluminum....[More Information]
   
   
8. DRIVER WHEELCHAIR RESTRAINT WITH POWERED WHEELWELLS (MODEL 1000) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Electrically operated wheelchair restraint for van drivers which is welded into wheelwell openings cut into the van floor. Operation of the restraint lowers the rear wheels of the wheelchair into 4 inch deep wheelwells so the driver is in a better driving position. Power operated levers engage steel cross bars attached to the wheelchair. Seat belt forces are transmitted directly through the restraint system to the restraint unit that is w...[More Information]
   
   
9. DRIVER'S ARM TYPE ELECTRIC TIE DOWN (MODEL 77141A) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Powered wheelchair restraint wire. Steel tie down system provides restraint for wheelchair from driver's right. Device attaches to wheelchair frame under right arm. Base of restraint mounts to floor of vehicle. Provides driving stability and restricts rolling and tipping of wheelchair. Includes occupant restraint belt....[More Information]
   
   
10. FOUR-POINT WHEELCHAIR TIE DOWN --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Four point passenger wheelchair restraint system. Belts attach to rear wheelchair axles and to the front frame of wheelchair. Belts are secured to floor-mounted brackets. Front belts include a ratchet mechanism to tighten belt. Tie-down fits most manual or powered wheelchairs or scooters. 1 year parts and labor warranty....[More Information]
    
    
11. KINEDYNE SERIES E TRACK (MODEL 43002) & SERIES A TRACK (MODEL FE 702-01) --- DISCONTINUED. (Verified 3/2013) RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair restraint system, series E/A track. High strength steel. Green enamel finish. Used to attach Kinedyne wheelchair restraint kit number FF865. Series E track, 5 inches wide, 17.6 pounds per 10 feet. Series A track, 5.2 inches wide, 13.2 pounds per 10 feet. Attaches to vehicle floor by 1/4 inch screws....[More Information]
    
    
12. KINEDYNE WHEELCHAIR SECUREMENT SYSTEM (MODEL FF855) --- DISCONTINUED. (Verified 3/2013) RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair restraint system series G four point system. Four wheelchair straps: 2 assemblies have cam buckle and attach to front vertical wheelchair frame. Rear assemblies have ratchet buckle and attach to back vertical wheelchair frame. Attaches to floor by series G aluminum tracks installed in front and behind wheelchair. Attendant required. Break strength 2500 pounds per tie down leg. Track sold separately. Fits most ...[More Information]
    
    
13. KINEDYNE WHEELCHAIR SECUREMENT SYSTEM FE500 SERIES --- DISCONTINUED. (Verified 3/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Kinedyne Wheelchair Securement System FE500 Series is a forward-facing wheelchair restraint device designed to provide maximum security while traveling in motorized vehicles and on transportation systems that accommodate chair users. This four-point tiedown safety system has passed the 30mph/20g's impact requirements. The system comes complete with two cam buckle straps for attachment and two over-center buckle strap...[More Information]
    
    
14. LATCHLOK AUTOMATIC WHEELCHAIR TIEDOWN SYSTEM --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Latchlok Automatic Wheelchair Tiedown System is a wheelchair restraint system that uses 2 floor-mounted docking devices. The main docking channel is supported under the wheelchair by 2 cross braces which connect to the wheelchair side frame rails without reducing ground clearance. Dual pins, front and back, prevent the wheelchair from pivoting in place. Battery cases and seat belts mount to the restraint for safety. ...[More Information]
    
    
15. LOWR N LOCK WHEELCHAIR RESTRAINT (MODEL 3000 L) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Electrically operated wheelchair restraint bolts to van floor. It lowers the wheelchair frame to the floor as the wheelchair wheels are raised with respect to the wheelchair itself. Allows lowering of the wheelchair seat about 4 inches without cutting holes in the floor for wheelwells. Power operated levers grab steel cross bars attached to the wheelchair. Seat belt forces are thus transmitted directly through the restraint system to the ...[More Information]
    
    
16. MANUAL TIE DOWN FOR WHEELCHAIR (MODEL 108) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Steel hook attaches to floor of van and x crossbar frame of wheelchair to provide restraint for wheelchair driver or passenger. Fits most standard wheelchairs. Manual system must be placed by attendant....[More Information]
    
    
17. MULHOLLAND TIE DOWN SYSTEM --- DISCONTINUED. (Verified 07/93) RETAINED IN DATABASE FOR REFERENCE. --- Tie down system for Mulholland seating system or standard wheelchair. Consists of two floor bolted tracks, two toggle action tie down clamps, fasteners. Features quick release levers for easy removal. 4000 pound capacity per tie down....[More Information]
    
    
18. OVER THE CENTER TIE DOWN (MODELS 11312A & 10621A) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair restraint tiedown system locks both sides of wheelchair to floor. Wells for restraints fit into floor of vehicle. Restraint is attached into well and attached frame between front and back wheels of chair. Includes occupant restraint belt....[More Information]
    
    
19. PARALLEL LAP, INTEGRATED LAP, & RETRACTABLE SHOULDER BELT --- DISCONTINUED. (Verified 3/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Parallel Lap Belt, Integrated Lap Belt, and Retractable/Non- retractable Shoulder Belt are wheelchair restraint systems and seatbelts for wheelchair users while in vehicles. The Parallel Lap Belts provide an occupant restraint system that is independent of the mobility aide securement system and is available in either a premium or standard version. The Integrated Lap Belt provides an occupant restraint system depende...[More Information]
    
    
20. PASSENGER WHEELCHAIR RESTRAINT (MODEL 2000 P) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Electrically operated wheelchair restraint which bolts to the van floor where there is no seat or a seat has been removed. Power operated levers engage steel cross bars attached to the wheelchair. Seat belt forces are transmitted directly through the restraint system to the vehicle floor. This system requires no welding or floor cutting for installation. The wheelchair is not lowered by this system....[More Information]
    
    
21. PERMOLOCK TIE-DOWN SYSTEM --- DISCONTINUED. (Verified 10/2010) RETAINED IN DATABASE FOR REFERENCE. --- Electrically activated, flush mounted tie-down system designed for the Permobile wheelchair. Enables wheelchair user to ride in driver or front passenger position in most vans. A single switch is used to electronically lock chair into position. Lock light indicates that chair securely fastened. Approach alignment is ensured by system design. Can be installed in Chrysler-Plymouth vans and MS Roadrunners. Tested and certi...[More Information]
    
    
22. POWER PAN RETROFIT WHEELCHAIR RESTRAINT (MODEL 4000S) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Electrically operated wheelchair restraint which bolts to a power pan that is used to lower a section of the van floor in the driver's area. Power operated levers on the restraint engage steel cross bars attached to the wheelchair. Seat belt forces are transmitted directly through the restraint system to the power pan....[More Information]
    
    
23. REAR WHEEL TIE DOWN (MODEL 11805A) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair restraint. Two high strength quick release push button pins hold rear wheels of chair in place. Constructed of heavy gauge steel. Base of system mounts on floor in any convenient position. May be used in combination with Braun 2 point track Belt System to provide 4 point wheelchair securement. System may be adapted to special applications or used as a single tiedown. Accommodates all wheelchairs. Includes 108 inch occupant rest...[More Information]
    
    
24. RICON RESTRAINT BELT --- DISCONTINUED. (Verified 11/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Ricon Restraint Belt is a wheelchair restraint system designed for use by individuals with mobility disabilities. This occupant restraint belt ensures safe travel while on a Ricon van lift (see separate entries). The restraint is electrically interlocked so the lift is allowed to operate only when the belt is secured to the buckle. This ensures that the occupant stays safely on the platform, whether or not they are ...[More Information]
    
    
25. SAF T LOCK (MODELS W-80, W-80A, W-80E, W-81, & W-81A) --- DISCONTINUED. (Verified 03/2006)RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair restraint system accepts small or large standard, manual and electric wheelchairs. Adjusts to various wheel widths; locks balloon or mag type wheels. Restraint mounts on vehicle wall or on floor near wall. Steel components test up to 2000 pounds restraining force. Unlocks by dual function hand or foot operated mechanism (W-80); electrically with a button or switch (W-80E); or by a manual pin type lock (W-81, W...[More Information]
    
    

Page 1 of 2    Next page »