Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu
Skip to Quick Links

Transfer Aid

Products are listed alphabetically.

Page 1 of 5    Next page »

  1. 'Lawry' Rotary Attachment for Paraplegics ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Rotating transfer device to allow paraplegics to use the toilet then swing away from the toilet on the same seat to use the shower hose. Device made of a U shaped seat held horizontally with the help of an S shaped cantelever system fastened to the floor and using ball and taper bearings to let it rotate. This is used in conjunction with an overhead support which allows paraplegics or lower extremity amputees with upper body strength to toilet and ...[More Information]

  2. ABLEWARE REVERSIBLE TOILET TRANSFER SEAT (RTTS) The Ableware Reversible Toilet Transfer Seat (RTTS) is a toilet transfer aids designed for use by individuals with mobility disabilities. The unit can be used with the armrests up to assist those who have difficulty rising from the toilet, but do not require as much assistance as provided by an elevated toilet seat or grab bars. When used with the armrests turned toward the floor, this device becomes an extra-wide extended platform to assist in wheelchair transfers. This seat bolts to most stan...[More Information]

  3. AGILELIFE SYSTEM The AgileLife System is an automated, no-lift patient transfer and mobility system, helping people who are bedridden transfer in and out of bed safely and quickly. For caregivers, AgileLife automates patient transfer to and from a hospital bed into a wheelchair/commode docked at the foot of the bed. The core product is an integration of several assistive devices that address the challenges of safe patient handling. In both home and institutional settings, the AgileLife System aids in preventing...[More Information]

  4. ARMREST TO ASSIST WITH STANDING --- CUSTOM ADAPTATION --- PURPOSE: To enable an individual with arthritis to rise to a standing position from a seat without armrests. This device was designed to be portable for use with a variety of armless chairs and church pews. The frame with a U-shaped base was made of 20 millimeter steel tubing and steel tubing armrests were attached to the base. The front arms or prongs of the base have wide flat strips that provide a stable surface for the user as she pushes on the armrests to stand. A ...[More Information]

  5. ASSIST-A-TRAY Picture of ASSIST-A-TRAY The Assist-A-Tray is a transfer aid and a swiveling tray for an armchair or sofa designed for use by individuals with balance or mobility disabilities. The unit features a sturdy, ergonomically designed handle for assistance when getting in or out of a sitting position and a multi-use swivel tray with cup holder and utensil compartment. The unit can be used on the right or left side of a chair or couch and the base slides underneath the furniture. The base has four feet with rubber pads to ensur...[More Information]

  6. ASSISTA-RAIL Picture of ASSISTA-RAIL The Assista-Rail is a transfer aid for beds designed for use by individuals with balance or mobility disabilities. This inverted-U shaped rail slides between mattress and box spring and the required, included safety strap with side-release buckle and anti-slide grips prevents the rail from shifting during use. Made of heavy-gauge steel, the rail is equipped with a non-latex foam grip. DIMENSIONS: The unit extends 24 inches under the mattress and up from the mattress 16 inches. The rail extends a...[More Information]

  7. AUST.RAIL.IA -------- PROTOTYPE --------- PURPOSE: To assist individuals with balance or mobility disabilities and generalized weakness stand and negotiate environmental barriers with a portable handrail. Aust.rail.ia is a portable all-purpose rail that can be used indoors or outdoors as a handrail, vehicle barrier, general purpose barrier or a “space-restoring” storage or shelving utility area. It can also be used as a sitting/standing aid. This portable rail requires mounting at one end, eliminating th...[More Information]

  8. Adapted Grab Bar for an Armchair. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Grab bar to assist person in standing up from upholstered armchair. Two metal strips attach to side frame of armchair. Two steel pipes form the bar. One attaches vertically to the metal strips. The second, horizontal bar attaches to the vertical one. A specially fabricated joint allows the horizontal bar to pivot or to lock in position, providing a stable hand grip. Measurements determine the optimum distance from chair for vertical bar and the opt...[More Information]

  9. BEASYGLYDER 32 Picture of BEASYGLYDER 32 The BeasyGlyder is a transfer board system designed to assist individuals in transferring between a wheelchair and bed, shower bench, commode, car, chair, etc or between a stretcher and a bed. This device is crescent-shaped to fit around wheelchair arms and wheels. It features an elongated S-shaped groove in the center to serve as a track for a round seat that rotates up to 360 degrees and slides from one end of the track to the other. Because the seat slides with the user, the shear stress and ...[More Information]

  10. BEASYTRANS EASY TRANSFER SYSTEM (ETS) & BEASY II EASY TRANSFER SYSTEM (ETS) Picture of BEASYTRANS EASY TRANSFER SYSTEM (ETS) & BEASY II EASY TRANSFER SYSTEM (ETS) The BeasyTrans ETS and Beasy II ETS are transfer board systems designed to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. These devices differ from other transfer devices in that they have sliding seats that move from one end of a central elongated S-shaped track to the other. Because the seats slide with the user, the shear stress and friction associated with moving is borne by the system, not the users' skin. ...[More Information]

  11. BED CADDIE Picture of BED CADDIE The Bed Caddie is a rope ladder designed to assist individuals with mobility disabilities or decreased back strength in pulling themselves to a sitting position in bed. This three-tiered nylon ladder has cushion grip handles and the ergonomic buckle design enables the unit to be attached to most wood or metal bed frames. DIMENSIONS: Grip length is 36 inches; handle grip is 5 inches. Strap length is adjustable up to 45 inches. CAPACITY: 300 pounds. WEIGHT: 2 pounds....[More Information]

  12. BED CANE Picture of BED CANE The Bed Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a large, crook-shaped handle with a cushioned grip and a powdercoated shaft affixed to a wooden base. The base fits between the mattress and box springs to provide stability for the handle which can be used for assistance while entering and exiting the bed, as well as to maintain balance while rising to a standing position or transferring to a wheelchair. The unit can be installed o...[More Information]

  13. BIRILLO GAIT TRAINER WALKER SIZE 1 The Birillo Size 1 is a gait trainer / walker specifically designed to give a child with special needs the ability to move freely and safely around the home, school, daycare, and therapy environments. The Birillo comes standard with a latex-free back and seat cushion with an adjustable abductor to promote upright sitting, and properly align the spine and pelvis for optimal lower leg mobility. The trainer / walker is a productive tool for therapists, teachers, and parents to aid in improving a...[More Information]

  14. BODY UP EVOLUTION Picture of BODY UP EVOLUTION The Body UP Evolution is a transport chair, caster commode, shower chair and transfer lift sling designed for use by people with balance, lower extremity or mobility disabilities, or spinal cord injury. FRAME (HxLxW): 44 x 35 x 18 inches. This chair has a stainless steel frame with a hinged back so that a person can be loaded from the rear of the frame. The frame separates into two pieces for transport or storage. SEAT: Sling seat that can be raised or lowered. To facilitate loading, the seat ca...[More Information]

  15. BOTTOMS UP BAR Picture of BOTTOMS UP BAR The Bottoms Up Bar is a transfer aid designed for people with lower extremity and mobility disabilities or spinal cord injury and lower extremity amputees. It allows a person in a wheelchair to transfer to a seated position on the ground or floor and from the floor or ground back into the wheelchair. The Bottoms Up Bar attaches to a wheelchair's frame with two collar clamps that are fastened to the front of the frame. The width of the Bottoms Up Bar is adjustable to accommodate multiple wheelcha...[More Information]

  16. BOTTOMS UP BAR ADJUSTABLE BASE UNIT Picture of BOTTOMS UP BAR ADJUSTABLE BASE UNIT The Bottoms Up Bar Adjustable Base Unit is a transfer aid designed for people with lower extremity and mobility disabilities or spinal cord injury and lower extremity amputees. It allows a person to use the Bottoms Up Bar (see separate record) transfer from a parked wheelchair or a chair, sofa or other sitting furniture to a seated position on the ground or floor and from the floor or ground back into the chair. The four legs of the Bottoms Up Bar are placed into holes in the Base Unit's frame ...[More Information]

  17. CAR SLIDE (MODEL 70406) The Car Slide, model 70406, is a transfer aid designed for persons who have difficulty getting positioned on a car seat, chairs, or beds. The device consists of a waterproof denim top and a slippery vinyl bottom. Large hand loops are made of 1-inch webbing and located on each side of the rectangular mat. DIMENSIONS: 30 x 35.5 inches. WEIGHT: 1 pound 9 ounces....[More Information]

  18. CARE-GIVE-R-LIFT BED SLED Picture of CARE-GIVE-R-LIFT BED SLED The Care-Give-R-Lift Bed Sled is a turning aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Designed for repositioning a person in a bed or recliner the device is made of cotton canvas with heavy nylon webbing handles across the width at two locations. A removable bed pad or terry cloth pad can also be placed on the device for comfort. The unit is hand- or machine-washable in warm water and should be air dried. DIMENSIONS(LxW): 40 x 30 in...[More Information]

  19. CARE-GIVE-R-LIFT SKID SEAT ( PERFORATED SUEDE VINLY) Picture of CARE-GIVE-R-LIFT SKID SEAT ( PERFORATED SUEDE VINLY) The Care-Give-R-Lift Skid Seat (Perforated Suede Vinyl) is a transfer aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Used for repositioning an individual into a seated position in a wheelchair or other chair with little or no strain on the caregiver, the device is designed for use with a gel cushion and is made of perforated suede vinyl backed with non-slip fabric. Perforations allow air circulation. The suede surface is soft to the to...[More Information]

  20. CARE-GIVE-R-LIFT SKID SEAT (CANVAS) (MODELS A & B) Picture of CARE-GIVE-R-LIFT SKID SEAT (CANVAS) (MODELS A & B) The Care-Give-R-Lift Skid Seat (Canvas) is a transfer aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Used for repositioning an individual into a seated position in a wheelchair or other chair with little or no strain on the caregiver, the device is made of cotton canvas. A snap-close tether stap holds the seat on the chair while the individual is being seated. The device can be hand washed and air dried. Model A has full loop handles s...[More Information]

  21. CAREX ULTRA GRIP PIVOT SUCTION GRAB BAR The Carex Ultra Grip Pivot Suction Grab Bar is designed to assist individuals in the tub, shower, and bathroom to prevent slips and falls, and offer support. These grab bars are available in straight lengths and 22 different custom designs. The unique pivoting center design allows for installation in whatever position it is needed and the handy visual indicators on the suction cups ensure you're grabbing onto a solid handle. Handy and easy to use, this suction cup grab bar delivers ideal balanc...[More Information]

  22. CINDY LIFT Picture of CINDY LIFT The Cindy Lift is a seat transfer lift aid designed to make lifts more manageable for caregivers and the individual being assisted and to broaden accessible areas for its user. The lightweight aluminium frame allows for quick transfers in a three-step process. This unit adjusts to the user's body and reduces the weight of its occupant for the lifter. The narrow profile fits through doors, halls, and restroom stalls. With this device, the user is able to wear street clothes instead of gowns, and ...[More Information]

  23. CONTEMPORARY STYLED TRANSFER BENCH (MODEL 77356) Picture of CONTEMPORARY STYLED TRANSFER BENCH (MODEL 77356) The Contemporary Styled Transfer Bench, model 77356, is a bathtub transfer bench designed for use by individuals with balance, lower extremity, or mobility disabilities. This bench has a contoured seat back with a handle for removal, sturdy legs with non-slip rubber feet, and a split seat with built-in drainage. The split seat allows the user to tuck in the shower curtain to avoid water leaking on the floor. The bench is reversible for shower use. OPTIONS: Shower Holder Attachment (model 77010);...[More Information]

  24. COUCH CANE Picture of COUCH CANE The Couch Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a crook-shaped handle with a cushioned grip on an adjustable powdercoated shaft resembling a standard cane affixed to a base with non-skid pads. This device can be used at either end of a couch or on either side of a large chair or recliner. The base slides under the furniture for stability and the handle can be used to assist in sitting down or in rising to a standing position. ...[More Information]

  25. Car Slide. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: A fabric slide to be used to help position a person on a car seat. Slide made with about a yard of slippery material (nylon) sewn to a yard of nonslippery material (denim) with strong fabric or webbing sewn in three long ovals to make handles. The nylon side goes against the car seat for ease of sliding. Includes diagram and photograph. SKILLS REQUIRED: Sewing. AUTHOR: Kernaleguen, A TITLE: Clothing Designs for the Handicapped REF: Edmonton, Albert...[More Information]

Page 1 of 5    Next page »

View discontinued Products (35)

AbleData, 103 W. Broad Street, Suite 400, Falls Church, VA 22046. 1-800-227-0216. Se habla español.
Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
by New Editions Consulting under Contract No. ED-OSE-13-C-0064.

The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor New Editions Consulting has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and New Editions Consulting make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or New Editions Consulting.