Products are listed alphabetically.

Page 1 of 1

1. CONTOURED HEADREST ASSEMBLY The Contoured Headrest Assembly is designed for individuals requiring medial/lateral, posterior and rotary support. The ABS plastic construction allows for customized molding with a heat gun. The mounting hardware (included) allows height and forward/backward adjustment with a slide bracket and knob. The headrestt is also available upholstered. SIZE: Large (model ASCH-LG) or small (model ASCH-SM)....[More Information]
   
   
2. CRE FLIP DOWN HEADREST The CRE Flip Down Headrest was developed to provide ease in transferring. The headrest flips down and out of the way with just one hand but remains attached to wheelchair. Constructed with steel tube mounting, the headrest is a vinyl upholstered, padded flat pad. Comes with mounting hardware ($130), which is also available for purchase separately ($90)....[More Information]
   
   
3. DEEP U HEADREST (MODEL DUHR100) The Deep U Headrest, model DUHR100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who need to keep their heads positioned upright and centered. DIMENSIONS: 11 x 5 inches....[More Information]
   
   
4. EXTENSION HEADREST (MODEL 72) The Extension Headrest, model 72, is designed for use with wheelchairs with push handles. The unit attaches to the wheelchair push handles with bracckets (included) to extend the back upholstery to form the headrest extension. DIMENSIONS: Adds 18 inches to the wheelchair back height....[More Information]
   
   
5. FRONT MOUNT HEIGHT ADJUSTMENT HEADREST BRACKET AND PADS Three custom size pads mounted on angled Kydex bracket which slips over top of tall solid back. Mounting knob in solid back secures headrest. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. May be ordered as unit ($140), or bracket ($40) or pads may be ordered separately....[More Information]
   
   
6. HEAD REST SUPPORTS (MODELS 430C1, 430C2, 430H1, 430H10, 430N1 SERIES) The Head Rest Supports are headrests and neckrests made from molded, contoured foam, and reinforced with flexible steel. They are available in large headrest, small headrest, combination headrest and neckrest, large neckrest, small neckrest, and lateral control. They can be modified as needed by bending the steel insert to the desired shape....[More Information]
   
   
7. HEAD STABILIZER The Head Stabilizer is a headrest designed for use with the tall models of the IncrediBack Rigid and Moldable Reclining Back Systems (see separate entries). Available in a moldable and a rigid model, the height-adjustable Head Stabilizer provides head and neck support and have lateral head support. The moldable version enables the lateral supports to be molded to conform to the head and neck. A moldable insert provides support for those with neck tone. The rigid support offers the same design, b...[More Information]
   
   
8. HEADREST / NECKREST HARDWARE: HARDBACK HEADREST HARDWARE (MODELS 430F7, 430F2, 430F6, & 430F5) & SLING BACK HARDWARE (MODEL 446K1) The Headrest and Neckrest Hardware, consisting of Hardback Headrest Hardware and the Sling Back Hardware, is a support system designed to attach Otto Bock headrests and neckrests to the back of a wheelchair. Model 430F7 has two ball joints for multi directional adjustability, including horizontal and vertical planes, for hard or rigid seat backs. Model 446K1 has attachment hardware for wheelchair frame of sling backs....[More Information]
   
   
9. HEADREST AND HARDWARE The variety of Headrests available include flat, radius, curved, Optional custom headrest pads to be attached to the solid back insert or to slingback chair with special bracket are also available. Headbands may also be attached. Type of Hardware headrest adjustments available are vertical height, forward/ back and ball and socket pivot. Also available with flipdown hardware (listed separately). COLORS: 38 colors available....[More Information]
   
   
10. HEADREST, LARGE & SMALL (MODELS 1450, 1451-01, -21, -31, -32, -33, 1460, 1461-01, -21, -31, -32, -33) The Headrests are designed for use with wheelchairs. Made of 16- gauge steel, they are plated to resist corrosion and have a recess in the center for two rows of ##10-32 press nuts. Both ends are contoured. The headrests are deburred for a smooth surface. OPTIONS: Available in metal only or with padding of 1 inch open cell foam, 3/8 inch closed-cell foam, and a cover. Covers are available in Terry, Lycra, and Heavy Weight Nylon. COLORS: Black, blue and red....[More Information]
    
    
11. HEADREST, PAD & BRACKET Headrest ($58.65 to 53.35). Easily removed pad has curved plastic base in 3 sizes. 1/2 inch foam cushioning, vinyl covered. Mounts to solid back insert with bracket ($108.35) which allows height, lateral and angle adjustments. 2 to 4 inches high, 5 to 9 inches wide....[More Information]
    
    
12. HEADWING HEADREST Two custom size pads, mounted to each side of tall solid back or splitback with angled Kydex brackets for lateral head support. Brackets slotted for adjustment of width. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. May be ordered as unit, or bracket or pads may be ordered separately....[More Information]
    
    
13. HEIGHT ADJUSTABLE (SPLITBACK) HEADREST Custom size pad and slotted aluminum bar mounts to shoulder height solid back with knob for easy removal and height adjustment. Pad is 1/2 inch thick medium density foam over 1/2 inch birch plywood. ....[More Information]
    
    
14. LARGE OXBOW HEADREST (MODEL LOX100) The Large Oxbow Headrest, model LOX100, is a headrest designed for use by use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who rotate their heads while seated in a wheelchair. It has flared ends that provide a flat area to rest the cheek when the head is turned to either side, and it is made of multi-layered foam with a zippered cover. DIMENSIONS (LxH): 16 x 8 inches....[More Information]
    
    
15. LARGE PADDED HEADREST (MODEL CPH100) The Large Padded Headrest, movel CPH100, s a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. This large multi-layered foam padded headrest provides comfort, support, and positioning. The headrest comes with a zippered Triptex cover. DIMENSIONS: 13 x 10 inches....[More Information]
    
    
16. LATERAL HEAD SUPPORT WITH MOUNT BAR (MODEL 6814) The Lateral Head Support with Mount Bar, ##6814 is a headrest designed for use with feeder seats that can be positioned to support from the occipital area and higher. The support is made of foam padding that comes around the sides of the head to provide support. SIZES: Small ($99), Medium ($109), and Large (115). COLOR: Red, blue, or orange....[More Information]
    
    
17. MINI HEADREST (MODEL 6829) The Mini Headrest, ##6829, is a small headrest with sidewings mounted on a channel bracket steel bar for mounting on a wheelchair or seating system. The device is made of an inner core of molded nylon with an outer cover of vinyl coated Ensolite foam. DIMENSIONS: 12 x 5 inches. COLOR: Black....[More Information]
    
    
18. MODULAR HEAD REST (MODEL 6812) The Modular Head Rest with Mount Plate, ##6812, is a head and neck support designed for use with the Hensinger Break-Away-Mount Plate (see separate entry). An adjustable vertical connector attaches the two devices together. Three vinyl coated foam discs cradle the head and may be adjusted for the use of head switches. COLOR: Black....[More Information]
    
    
19. NECK/SHOULDER POSITIONING COLLAR ASSEMBLY The Neck/Shoulder Positioning Collar Assembly is a headrest designed to replace both occipital support and rigid shoulder positioners or other anterior thoracic supports for users with moderate to low "tone." The malleable aluminum collar provides posterior neck support and superior and anterior shoulder support. It is padded with closed cell foam and upholstered with nylon terry cloth backed with neoprene rubber. The mounting hardware (included) allows height and forward/back adjustment with a ...[More Information]
    
    
20. OCCI DISH The OCCI Dish is a head support designed to relieve preesure from the back of the head. This support features a detachable cervical pad and a Durafilm-coated core for moisturer resistance....[More Information]
    
    
21. OCCIPITAL BAR ASSEMBLY The Occipital Bar Assembly is a headrest designed to provide posterior head support for individuals with good medial/lateral and rotary head control. The straight (model ASOB-ST) and contoured (models ASOB-LC and ASOB-SC) occipital bars are padded with neoprene rubber and upholstered with nylon terry cloth backed with neoprene rubber. The mounting hardware (included) allows height and forward/backward adjustment with slide bracket and knob. DIMENSIONS: The Straight bar is 6 inches long. The Con...[More Information]
    
    
22. OCCIPITAL HEADREST SYSTEMS & 2-STEP HEADREST SYSTEMS The Occipital Headrest Systems are head supports designed to provide support beneath the occipital portion of the head, as well as laterally. An aluminum ban inside the headrest covers may be bent, shaped, or cut down. Models are available fixed and swing-away, with or without headbands (nos. 91100 to 93200). The 2-Step Headrest models are appropriate where additional surface area and contact are required. They have an ABS plastic base which can be heated and re-shaped for a more precise fit. Th...[More Information]
    
    
23. ORTHOCARE SUPRONE HEADREST (MODEL 2018) The Orthocare Suprone Headrest ##2018 is a contoured headrest designed to provide stable supine or prone positioning. It is made of polyurethane foam, and has a cross ventilation slot for breathing. SIZES: One size fits all....[More Information]
    
    
24. OXBOW HEADREST (MODEL OX100) The Oxbow Headrest, model OX100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who rotate their heads while seated in a wheelchair. It has flared ends that provide a flat area to rest the cheek when the head is turned to either side. DIMENSIONS: 15 x 4 inches....[More Information]
    
    
25. POWER HEADREST The Power Headrest is a powered headrest and driving control system designed for use by individuals with upper extremity disabilities, severe physical disabilities, or spinal cord injury. This headrest features motorized activation to swing it into position for driving and to the storage position for unencumbered exit and entry into driving position. Its driving control function enables drivers with disabilities that limit hand/finger usage while driving to access turn signals, horn, dimmer, wip...[More Information]
    
    
26. RETRACTABLE HEADREST SYSTEM (MODELS 06-1 & 06-1S) Retractable headrest system for high quad power recliners. Headrest moves to natural position for support and retracts compactly behind back when not in use. Replaces spreader bar for back stability. Has infinite height adjustment on back. Power recliner and head rest can be activated with common switch with available interface. 24 volt DC gear motor with overload protection. Available for all makes and models of reclining wheelchairs. Model 06-1 is for standard back; Model 06-1S is for sliding ...[More Information]
    
    
27. SEATING ACCESSORY SYSTEMS (MODEL 6800) The Seating Accessory System, ##6800, is designed to provide head and trunk support to feeder seats. A pre-formed aluminum bar incorporates an attached head positioner with the Danmar chest support. The chest support's lap belt goes through existing strap holes and the bar fits around the seat and is secured with channel brackets (included). SIZES: Small, with lateral head support provided by foam pads, wedged and formed, to cradle the head; Medium and Large, both with full C Collar for side su...[More Information]
    
    
28. SLEEPY TIME HEADREST The Sleepy Time Headrest is a head and neck support designed for use by for children with neurological or physical disabilities sitting in car seats. Covered with cotton fabric, this support has a polyester fill that cradles the child's head and neck in all directions, without confining head movement. The Sleepy Time Headrest can be used in car seats, booster seats with backs, infant carriers, strollers, infant swings, wheelchairs, and feeder chairs. SIZES: Infant (for children up to 25 pound...[More Information]
    
    
29. SO SOFT DEEP U HEADREST (MODEL SSDU100) The So Soft Deep U Headrest, model SSDU100, is a wheelchair headrest and head support designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs and need to keep their heads positioned upright and centered. This unit has aggressive laterals for maintaining head position, tapered for minimal interference of vision. The headrest has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure reli...[More Information]
    
    
30. SO SOFT OVAL HEADREST (MODELS SSO100S & SSO200L) The So Soft Oval Headrest, models SSO100S and SSO200L, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. The headrest has a contoured shape for lateral support. It has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure relief and comfort. The headrest comes with a zippered Triptex cover. SIZES: Small (SSO100S) or large (SSO200L). DIMENSIONS: 11 x 5 in...[More Information]
    
    
31. SO SOFT QUAD HEADREST (MODEL SSQ4100) The So Soft Quad Headrest, model SSQ4100, is a wheelchair headrest and head support designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. The unit is slightly contoured for comfort and positioning. It has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure relief and comfort. This headrest comes with a zippered Triptex cover. DIMENSIONS: 9 x 6.5 inches....[More Information]
    
    
32. STANDARD CURVED PADDED HEADREST (MODEL HRC100) The Standard Curved Padded Headrest, model HRC100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. It has a contoured U shape for positioning, and foam padding with a zippered Triptex cover. DIMENSIONS: 11 x 4 inches. Padding is 2.5 inches deep....[More Information]
    
    
33. STEALTH COMFORT PLUS HEADREST (MODELS ASL909 & ASL910) The Stealth Comfort Plus Headrest is a wheelchair headrest designed for use by individuals with mobility disabilities. This large padded headrest comes with fixed mounting hardware. Padded with dual layers of premium foam, this headrest comes with a plush slip-on Darlexx cover. It has a metal back and comes with half-inch square Otto-Bock style headrest hardware. OPTIONS: Flipdown headrest hardware (model ASL617); ajustable/removable headrest hardware (model ASL623). DIMENSIONS: model ASL909 is ...[More Information]
    
    
34. STEALTH ELITE HEADREST (MODEL SM-SE210) The Stealth Elite Headrest, model SM-SE210, is a headrest designed for use by individuals who use wheelchairs. This headrest is intended for individuals who do not need a midline cue. The two lateral swing-away components can be used for switch mounting and if a sensor is added in the backpad, it can also be equipped for computer access....[More Information]
    
    
35. STEALTH ULTRA HEADREST (MODEL SM-SU200) The Stealth Ultra Headrest, model SM-SU200, is a combination wheelchair headrest and switch mounting hardware designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. The sub occipital component aids the user in finding the midline. The two lateral swing-away components can be used for sensor mounting and a sensor can also be mounted in the backpad. ...[More Information]
    
    
36. SWEEP HEADREST (MODEL 6830) The Sweep Headrest, ##6830, is a wrap around headrest with an occipital convex foam cushion built in across the bottom of the center pad to cradle the head. The support has two small wings that form the sides, angled at 60 degrees off center back pad. The heavy duty back plate has pre-threaded 1/4-20 metal inserts for mounting and eight 1-inch bushings which can be used as spacers to adjust the distance of the headrest to the head. An optional installation kit is available ($169 including headre...[More Information]
    
    
37. TOP MOUNT MULTIPLE ADJUSTMENT HEADREST BRACKET AND PADS Three custom size pads mounted on angled Kydex or aluminum bracket which attaches to shoulder height solid back. Mounting knob in solid back secures headrest, allowing it to be removed. Hardware allows height, tilt, and forward and back adjustment. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. May be ordered as unit, or bracket or pads may be ordered separately. Components: $50.00 to 40.00 brackets, $134.00 headwing bracket and pads....[More Information]
    
    
38. VERTICALLY ADJUSTABLE SOLID BACK MOUNT HEAD/NECK SUPPORT (MODEL 107-1000) & MULTI ADJUST HEAD/NECK SUPPORT (MODEL 107-2000) Head and neck support component for adaptive positioning. 4 3/4 inch range of vertical adjustment, or Multi Adjust mounts with bracket to permit vertical, front to rear, tilt and rotational adjustment. 1/4 inch ABS plastic, with separate removable foam pad. Shape allows posterior support at the occiput and rotational control without ear irritation. Mounts on solid back. Sizes: small, medium, large and extra large. Options: custom sizes, hydrocephalus modification, off set mounting. Accessories: ...[More Information]
    
    
39. ZIPPIE HEAD AND NECK TELESCOPING SUPPORT SYSTEM Three-piece headrest with center pad and two adjustable side pads. Standard pad sizes: center 4 inches wide by 6 inches high, side pads 4 inches wide by 2 inches high. Custom sizes available. Center pad has occipital shelf or can be ordered flat. Mounting hardware allows adjustment of side pad depth, angle, and width, and adjustment of entire headrest in height, forward/back, and angle. Attaches to solid back....[More Information]
    
    

Page 1 of 1