Products are listed alphabetically.

« Previous page    Page 6 of 10    Next page »

126. LIBRE The Libre is a manual wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18 inches wide in one inch incr...[More Information]
     
     
127. LIBRE TILT The Libre Tilt is a manual tilt in space wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18 inches wi...[More Information]
     
     
128. LIFESTAND LSA HELIUM The LifeStand LSA Helium is a stand up wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This is a manually propelled, manual standing wheelchair. The user lifts him- or herself to a standing position by grabbing standing mechanism handles and using the same motion that propels the chair forward, with assistance from a hydraulic cylinder system which is adjusted to the individual's weight. FRAME (HxLxW sitting): 78 or 9...[More Information]
     
     
129. LIFESTAND LSE The LifeStand LSE is a stand up wheelchair designed for use by children and adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This mobile standing frame consists of a manually propelled wheelchair with a power stand-up unit. When the chair is in standing position, the user's chest, knees, and ankles are supported in a straight line. FRAME (LxWxH sitting): 109 x 59, 63, 67 or 72 x 86, 98 or 100 centimeters. The length when standing is 104 centimeters. Anti...[More Information]
     
     
130. LIGHTWEIGHT WHEELCHAIR (MODELS 1820 & 1821) The Lightweight Wheelchair is a lightweight wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding crossbrace frame. SEAT (LxW): 16 x 16 inches (model 1820) or 16 x 18 inches (model 1821). The seat-to- floor height is 19.5 inches, and the padded backrest is height adjustable from 15 to 19 inches. UPHOLSTERY: Lightweight nylon upholstered seat. ARMRESTS: Included. FOOTRESTS: Optional swingaway footrests (model 1822) are available. CAPACITY: 300 pounds. WEIGHT: 32 po...[More Information]
     
     
131. M.A.C. (MULTI-ADJUSTABLE CHAIR) The M.A.C. (Multi-Adjustable Chair) is a tilt-in-space wheelchair designed for use by individuals with mobility disabilities. FRAME: The tubular steel frame collapses for transport. The frame is available in a choice of narrow (14 inches wide), standard (16 inches wide), or wide configurations (19 inches wide), and is offered in a choice of of 10 standard colors; one specialty color and custom colors are available at an extra cost. Push handles are standard. An expandable frame is optional. SEAT...[More Information]
     
     
132. MANUAL DELUXE ADULT WHEELCHAIRS The Manual Deluxe Adult Wheelchairs feature an 18-inch wide seat with pocket, deluxe removable desk arms, ABS plastic armrests, swing-away detachable or elevating footrests, and 23-inch spoked rear wheels with solid rubber tires and sealed precision bearings....[More Information]
     
     
133. MANUAL STANDARD ADULT WHEELCHAIRS The Manual Standard Adult Wheelchairs feature standard fixed arms, ABS plastic armrests, a pocket at the back of the 18-inch wide seat, swing-away detachable footrests or elevating footrests, 23-inch spoked rear wheels with solid rubber tires and sealed precision bearings....[More Information]
     
     
134. MART CART SHOPPER'S AID The Mart Cart Shopper's Aid is a transport wheelchair designed for use by shoppers with mobility disabilities. This lightweight chair is designed to fit behind a standard shopping cart (not included), with space to seat passengers of all sizes, including one or two children or a single adult. Its universal mounting system attaches to the chair to a shopping cart by tightening a few bolts. FRAME: Available frame colors are red, blue, green, gray, or chrome. A platform under the seat provides addi...[More Information]
     
     
135. MAXIMA Maxima is an adult manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. A tool kit is includeed. FRAME: Chrome molly or titanium frame in a variety of colors with adjustable camber bar and frame protectors. Special finishes, anti-tips, push handles, an side gaurds are optional. SEAT: Ergonomic seating is optional. UPHOLSTERY: Adjustable upholstery is standard; leather upholstery and a folding backrest are optional. C...[More Information]
     
     
136. MERLEXI CRAFT LIBERTY I Merlexi Craft Liberty I is a lightweight manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME:It has a molded synthetic frame for light weight. The folding frame is made of molded reinforced polypropylene and is 13.5 inches wide when folded with wheels. Color options include red, blue, green, and black. The ergonomically designed full control handle is molded into the chair side. SEAT (LxW): 17 to 18 x 16 to 1...[More Information]
     
     
137. MERLEXI CRAFT LIBERTY II Merlexi Craft Liberty II is a lightweight manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The chair has a reinforced polypropylene body and the frame folds to 13 inches wide with wheels. An ergonomically-designed full control handle is molded into the chair side. Color options include red, blue, green, and black. SEAT (LxW): 17 to 18 x 16 to 18 inches. The chair has a solid contoured FormFold seat with f...[More Information]
     
     
138. MODIFIED STAIR CLIMBER -------- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted modification to a stair climber for an individual who uses a wheelchair. The individual attends a mediation class that requires him to get up a flight of 20 steps. Previously he used a commercially available stair climber that clamped onto his wheelchair and lifted him up the stairs. This adaptation was working well until the user got a new wheelchair which was not compatible with the stair climber. The new wheelchair h...[More Information]
     
     
139. NEWPORT EXTRA WIDE (MODELS 375, 375E, 375X, & 375XE) The Newport Extra Wide is an heavy-duty adult manual wheelchair designed for use by large individuals with mobility disabilities. FRAME: Heavy-duty, double cross-braced, high-lustre chrome-plated carbon steel folding frame with high stress areas utilized. All models are 12 inches wide when folded. Models 375 and 375X are 37 x 42 x 32 inches and models 375E and 375XE are 37 x 45.5 x 32 inches. Anti-tip and anti-folding devices are optional. SEAT (WxHxD): The seat on models 375 and 375E is 22 x ...[More Information]
     
     
140. ODYSSEY 700 SERIES The Odyssey 700 Series are manual wheelchairs designed for use by individuals with mobility disabilities. FRAME: Hammer tone grey finish which resists chips and scratches. Anti-tips are available. SEAT: The seat width is 16 inches on models 706 and 716 and 18 inches on models 708, 718, 728, 738, 745, and 747. All models have a seat depth of 16 inches. Models 745 and 747 are hemi-height chairs with a height of 17 and 18 inches respectively. Other models have a seat height of 19 inches. A seat be...[More Information]
     
     
141. ORION II The Orion II is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. FRAME (LxWxH): 34.5 x 27.5 x 44 inches. The seat-to-floor height ranges from 13.25 to 20 inches, depending on the choice of wheels and casters. The frame is equipped with a low or high push bar and cane-style push handles. A multi-adjustable axle plate is standard. Rear anti-tips are optional. The frame is av...[More Information]
     
     
142. ORTHOFAB CH WHEELCHAIR The Orthofab CH Wheelchair is a manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Folding aluminium composite frame includes side pouch for personal belongings and a clear plastic window for an identification label. SEAT (LxW): 16 x 16, 17 x 16, 18 x 16, 18 x 18, 20 x 16, or 20 x 18 inches. The seat is a removable tension-adjustable sling with folding handle. The adjustable-tension sling back has height ad...[More Information]
     
     
143. PARAFREE WHEELCHAIR -------- PROTOTYPE --------- PURPOSE: To design a prototype of a minimalist wheelchair for individuals with lower extremity or mobility disabilities or spinal cord injury who are looking for a functional, stylish, and sporty mobility solution that provides a little extra workout throughout the day. Parafree is a minimalistic wheelchair with a unique frame structure designed to compel individuals with paraplegia to maintain constant balance, encouraging abdominal, back and core muscle training. T...[More Information]
     
     
144. POLLYWOG TRANSPORT CHAIR The Pollywog Transport Chair is a transport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This transport chair can be transformed into a self-propelled wheelchair by removing the rear casters and substituting 24-inch wheels (included). FRAME: All aluminum frame. SEAT: 18-inch seat width. This chair has a fold-down back with carry pocket. UPHOLSTERY: Nylon upholstery. ARMRESTS: Full-length folding arm. BRAKES: Dual brakes for use as wheelchair or tra...[More Information]
     
     
145. POLY-FLY HIGH STRENGTH, LIGHT WEIGHT WHEELCHAIR/FLYWEIGHT TRANSPORT CHAIR COMBO (MODELS TR16, TR18 AND TR20) The Poly-Fly High Strength, Light Weight Wheelchair/Flyweight Transport Chair Combo, models TR16, TR18 and TR20, is a manual lightweight wheelchair and transport wheelchair for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair can be converted from a standard manual wheelchair to a transport wheelchair by removing the large rear wheels so that the chair rolls on 4 casters that are fixed in the rear and swivel in front. FRAME (LxWxH):...[More Information]
     
     
146. PRIMA Prima is a manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Overall width is seat width plus 8.5 inches. Minimum folded width is 11 inches. The frame is made of aircraft quality aluminum tubing with epoxy paint in choice of six colors. SEAT (LxW): 14, 15, 16, 17, 18, 19, or 20 inches x 14, 15, 16, 17, or 18 inches (single cross frame) or 16, 17, 18, 19, 20, 21, or 22 inches (double cross frame). The seat ...[More Information]
     
     
147. PRIMA SI (TANGO) WHEELCHAIR The Prima si Wheelchair, also called Tango, is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabiltiies or spinal cord injury. FRAME: Overall frame length without the footrest is 27 to 33 inches with a 20-inch wheel, 28 to 34 inches with a 22-inch wheel, and 29 to 35 inches with a 24-inch wheel. The overall width is seat width plus 8.25 to 9.75 inches. This chair tilts from minus 5 to plus 45 degrees with three positions for b...[More Information]
     
     
148. PRO-TENNIS ACE & PRO-TENNIS ELITE The Pro-Tennis Ace and Pro-Tennis Elite are sport wheelchairs designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. Both models are designed specifically for use in playing wheelchair tennis. FRAME: Adjustable-height frame constructed from titanium aerospace alloy tubing. The Pro-Tennis Elite has a fully loaded frame with integral camber bar. SEAT: The Pro-Tennis Ace has a fixed seat with an adjustable camber bar. FOOTRESTS: All models ...[More Information]
     
     
149. QR SERIES (MODEL 2058-34) The QR Series 2058-34 is an adult manual drive wheelchair. FRAME: The folding frame is made of hardened steel with an endruro coat high lustre finish. The frame weights 34 pounds without the footrest. The overall width of the frame is 25 inches. Stainless steel, screw attached clothing guards are standard. From the basic 2058 frame style, a complete line of twenty-four different wheelchairs are available. SEAT: Seat width 18 inches, seat depth 16 inches, standard back height 16 inches. The QR Se...[More Information]
     
     
150. QUICKIE 2 The Quickie 2 is a manual drive, ultralight adult wheelchair. FRAME: Folding anodized aluminum frame with a choice of straight or rounded rear side frame. The frame widths range from 11 to 20 inches in regular, long, hemi, and hemi long configurations. Anti-tip tubes are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 12- or 16-inch depths. Optional seat depths include 10, 11, 13, 14, 15, and 17 inches. Seat widths are .5 inch n...[More Information]
     
     

« Previous page    Page 6 of 10    Next page »