Skip navigation Return to standard layout with columns
Menu
Skip to Quick Links

Switch Adapter

Products are listed alphabetically.

Page 1 of 2    Next page »

  1. BATTERY ADAPTER (MODEL 720) The Battery Adapter, model 720, is a switch adapter interface for single switch activation of any battery operated toy, tape recorder, or other device. Continuous pressure on the switch keeps the device running until the switch is released. The adapter can be used with the Switch Latch/Timer (see separate entry) to set action for a specified time period or to use switch hits for on and off. The disk end is inserted into the battery compartment; the other end plugs into any switch with a standard...[More Information]

  2. BATTERY DEVICE ADAPTER Picture of BATTERY DEVICE ADAPTER The Battery Device Adapter is a switch adapter for toys and other battery-operated devices, designed for use by children and adults with fine motor and upper extremity disabilities. This switch adapter is an interface control that can be used to adapt any battery operated toy or other device, such as a radio or CD player, for switch operation. The user inserts the adapter between the end of the battery and the contact, turns the device on, and plugs a switch into the mini-jack port. The toy or d...[More Information]

  3. BATTERY INTERRUPTER Picture of BATTERY INTERRUPTER The Battery Interrupter is a battery interface control for toys designed to create switch compatibility for non-adapted toys for individuals with fine motor or physical disabilities. It is a cable that fits between any battery-operated toy or device and a switch, permitting the toy or device to be operated by the switch. It interrupts the power by inserting a disc between on of the batteries and the adjacent anode. There are two models available for battery sizes AA and AAA or C and D batteries....[More Information]

  4. CONNECTOR ADAPTER CA-1 (MODEL 4342) The Connector adapter CA-1, model 4342, is a switch adapter designed to allow users to plug two single switches into a device with a stereo plug for individuals with physical disabilities....[More Information]

  5. CONNECTOR ADAPTER CA-6 (MODEL 4354) The Connector Adapter CA-6, model 4354, is a switch adapter designed to allow users to use one multiple switch with five devices that are each operated by a single switch for individuals with physical or cognitive disabilities....[More Information]

  6. CONNECTOR ADAPTOR CA-2 (MODEL 4341) The Connector Adapter CA-2, model 4341, is a switch adapter designed to allow users to use a dual switch with two devices that are each operated by a single switch for individuals with physical or cognitive disabilities....[More Information]

  7. CONNECTOR ADAPTOR CA-4 (MODEL 4358) The Connector Adapter CA-4, model 4358, is a switch adapter designed to allow users to use a dual switch with one device that is operated by a single switch for individuals with a physical or cognitive disability....[More Information]

  8. CRICK USB SWITCH INTERFACE Picture of CRICK USB SWITCH INTERFACE The Crick USB Switch Interface is a computer switch adapter designed to make computers switch-operable for individuals with upper extremity disabilities or spinal cord injury. This switch interface works with almost all switch accessible software. It plugs directly into the computer's USB port and connecting switches. It will instantly work with Clicker, Cloze Pro, and All My Words 2 (not included) with no set up required. For other switch accessible software, this adapter comes with USB Keys, a...[More Information]

  9. Dictaphone Switch for Use by a Paraplegic. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Switch adapter to allow operation of a dictaphone with a floor switch by a paraplegic typist. Describes a hand operated push-button switch designed to replace a foot operated rocker switch for a dictaphone machine. The switch includes a push-on push-off button and a single pole double throw momentary push button to control the rewind mode. COMMENTS: For further information contact: The Cerebral Palsy Research Foundation, Rehabilitation Engineering ...[More Information]

  10. Double Switch Box. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to permit two switches to be hooked up to a single toy or tape player so that a child has to do two things at once to turn it on. Instructions for building a double switch box using a small plastic jewel or watch box, 2 subminiature size jacks, one subminiature size plug, 4 feet of two conductor, 22 gauge stranded wire and 3 inches of single conductor, 22 gauge wire. Includes diagrams. SKILLS REQUIRED: Soldering. Electronics. AUTHOR: Burkhar...[More Information]

  11. EXTENSION CORD The Extension Cord is a control switch accessory designed to allow more distance between the switch and the item being controlled. DIMENSIONS: The cord is 6 feet long....[More Information]

  12. H-31 DUAL BUTTON BOX Picture of H-31 DUAL BUTTON BOX The H-31 Dual Button Box is a computer switch control interface designed to enable individuals with severe physical, motor control, neurological or upper extremity disabilities or spinal cord injury to control a 2-switch adapted device. The user plugs the switch input of the device he or she wishes to control into the back of the Dual Button Box. One button on the Dual Button Box will "step scan" through the device's menu or options. When the user reaches the desired option or action, he or she...[More Information]

  13. H-46 SCANOVER (SCANNING VOICEOVER SWITCH INTERFACE) Picture of H-46 SCANOVER (SCANNING VOICEOVER SWITCH INTERFACE) The H-46 ScanOver (Scanning VoiceOver Switch Interface) is a computer switch control interface designed to enable individuals with severe physical, motor control, neurological or upper extremity disabilities or spinal cord injury to control an Apple iPad with a switch. This unit has a speaker and headphone jack, a front panel showing the status of the Bluetooth module inside, and a rear panel for the scanning options. The user turns VoiceOver on with triple click and starts scanning with either...[More Information]

  14. H-68 SCAN-5 Picture of H-68 SCAN-5 The H-68 Scan-5 is a computer switch control interface designed to enable individuals with severe physical, motor control, neurological or upper extremity disabilities or spinal cord injury to control a TV, Apple iPod, voice recorder, MP3 player, DVD player or switch-adapted toy/device with a switch. This stand-alone device can be used by a person that can operate one or two switches. The user plugs a switch-adapted remote control or device that he or she wishes to control into the Scan-5's 9-pi...[More Information]

  15. H-69 SELECT-5 Picture of H-69 SELECT-5 The H-69 Select-5 is a control input interface designed to enable individuals with severe physical, fine motor control, neurological or upper extremity disabilities or spinal cord injury to control a TV, Apple iPod, voice recorder, DVD player, MP3 player or a switch-adapted toy or appliance. This stand-alone device features 5 large round buttons: Power/play/pause; Advance forward or Channel up; Go backward or Channel down; Volume up; and Volume down. The user connects a device or remote control ...[More Information]

  16. INTENTION MODULE (MODEL 565) Picture of INTENTION MODULE (MODEL 565) The Intention Module, model 565, is a control switch interface unit designed for use by persons with uncontrolled movements. When a capability switch is plugged into this module, sustained pressure is required before it activates a device. The module can be preset for a delay of from 1 to 12 seconds before it activates a device. The unit comes with a 0.13-inch plug. POWER: Uses 1 9-volt battery....[More Information]

  17. IPAD CORDLESS SWITCH INTERFACE Picture of IPAD CORDLESS SWITCH INTERFACE The iPad Cordless Switch Interface is a computer switch control interface designed to enable individuals with severe physical, motor control, neurological or upper extremity disabilities or spinal cord injury to control an Apple iPad with a switch. This unit has two switch input jacks. When a switch is plugged into one of the unit's jacks, the switch input becomes a tap or touch for any iPad application (app) programmed for switch access. The switch interface connects to the iPad wirelessly usin...[More Information]

  18. Large Area Flap Switch to Control Battery-Operated Toys. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Simple to operate switch to modify a battery operated toy so it can be used by a disabled child. Describes a large area push switch as a modification of the on- off switch for a toy. It consists of two pieces of plywood hinged together on one side with a simple contact switch or microswitch between them, and a strip of self-adhesive open cell foam tape keeping the top board from touching the bottom, thus activating the switch, unless it is pressed ...[More Information]

  19. MALE 1/8 TO FEMALE 1/4 ADAPTER & MALE 1/4 TO FEMALE 1/8 ADAPTER The Male 1/8 to Female 1/4 adapter and the Male 1/4 to Female 1/8 Adapter are switch adapters designed to ensure compatibility between switches and switch-adapted toys and appliance. One end features a plug and the other end is equipped with a jack....[More Information]

  20. MOUSER 3 SWITCH BOX Picture of MOUSER 3 SWITCH BOX The Mouser 3 Switch Box is a switch adapter for computer designed for use by individuals with fine motor and upper extremity disabilities. It allows unwanted mouse buttons to be turned off and operated instead from a switch. With this product, mouse-click software can be accessed with a switch. This product has two PS2 mouse sockets allowing the mouse and another device such as a joystick to be used together, with automatic switching between the mouse sockets....[More Information]

  21. MULTISWITCH MODULE (MODEL 575, 575-8) The Multiswitch Module is a switch adapter which allows several switches to be connected to the same switch-operated device (such as a toy) designed to encourage group participation for individuals with physical, sensory or cognitive disabilities. Which of the switches controls the toy is determined by the setting of toggle switches on top of the module. The module has four jacks for plugging in switches and one output plug for connecting to the toy. The plug can also be connected to a computer ...[More Information]

  22. NINE VOLT BATTERY ADAPTOR MODULE (MODEL 630, 630-8) Nine Volt Battery Adaptor Module, model 630 and 630-8, is a device that allows a single switch to be used to control any device powered by a nine-volt transistor battery for individuals with a physical disability. The switch is plugged into a jack on the Adaptor Module. A special plug wired to the Adaptor Module connects between the battery contacts in the device and the battery itself. When the switch is activated the battery connection is completed and the device is turned on. When the switch ...[More Information]

  23. ON/OFF MODULE (MODEL 581) The On/Off Module, module 581, is a switch adapter designed for use by individuals with upper extremity disabilities. When this module is connected between a switch-adapted device and two switches (not included), the module enables one switch to turn the device on and the second to turn the device off. The module is equipped with a combination 0.25-inch and 1/8-inch plug....[More Information]

  24. PAGEBOT FOR KINDLE 2 Picture of PAGEBOT FOR KINDLE  2 The PageBot for Kindle 2 is a switch interface for the Amazon Kindle 2 electronic book reader designed for use by individuals with neurological disabilities, spinal cord injury, amyotrophic lateral sclerosis (ALS), cerebral palsy, muscular dystrophy, spinal muscular atrophy, multiple sclerosis, stroke, arthritis, or repetitive strain injury. This switch interface works with all models of Amazon's 2nd Generation Kindle, including both the domestic (U.S.) wireless and international wireless models...[More Information]

  25. PAGEBOT FOR KINDLE DX Picture of PAGEBOT FOR KINDLE DX The PageBot for Kindle DX is a switch interface for the Amazon Kindle eBook reader, designed for use by individuals with neurological disabilities, spinal cord injury, amyotrophic lateral sclerosis (ALS), cerebral palsy, muscular dystrophy, spinal muscular atrophy, multiple sclerosis, stroke, arthritis, or repetitive strain injury. This switch interface works with all models of Amazon’s Kindle DX, including both of the original white models. It enable individuals who cannot hold the Kindle or pr...[More Information]

Page 1 of 2    Next page »

View discontinued Products (36)

AbleData, 103 W. Broad Street, Suite 400, Falls Church, VA 22046. 1-800-227-0216. Se habla español.
Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
by New Editions Consulting under Contract No. ED-OSE-13-C-0064.

The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor New Editions Consulting has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and New Editions Consulting make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or New Editions Consulting.