Products are listed alphabetically.

Page 1 of 1

1. CORNER CHAIR (MODELS C4, C4-C, C5 & C5-C) The Corner Chair is an adjustable corner seat designed for use by children with neurological, mobility, or severe physical disabilities. This chair provides support for asymetrical posture and midline control of the head and trunk. All models include a firm, padded insert which converts the V-shaped back to a three-section wing back. The seat can be raised so the child can be positioned with the hips and knees flexed or lowered so that the hips are flexed and the legs extended to facilitate long...[More Information]
   
   
2. CORNER SEAT The Corner Seat is a corner seat designed for use by children with neurological or severe physical disabilities. This chair is portable for use anywhere indoors or out and can also be used in a bathtub. It has an H-strap and hip belt to stabilize the shoulders, pelvis, and trunk and a built-in abductor to help maintain leg extension and reduce thrust. Features include a broad, stable base and easy-to-wash polyethylene surface. DIMENSIONS (HxLxW): 22.5 x 11 x 19 inches. The base is 17 x 27 inches...[More Information]
   
   
3. CORNER SEAT (MODEL 72140) The Corner Seat, model 72140, is designed to facilitate normal sitting patterns inchildren aged 2 to 8 years old who need positioning while sitting. The seat places the hips lower than the knees to interrupt abnormal muscle tone, encourages legs to roll outward for stability, and keeps the back straight to prevent rounding. It also has an abduction pommel built into the front for knee separation. The seat may also be useful with spastic and athetoid children. The chair is made of canvase stretch...[More Information]
   
   
4. CORNER SITTER The Corner Sitter is a corner chair designed for use by children with neurological or severe physical disabilities. This chair is designed to help improve posture and promote upper body control. Features include a reclining backrest with adjustable sides for lateral support. The backrest angle is adjustable from a 20 degree recline to 15 degrees prone. Other features include a hip belt and an adjustable depth, removable pommel. The chair folds flat for storage. OPTIONS: Options include a high-ba...[More Information]
   
   
5. CPSC CORNER SEAT & CPSC CORNER SEAT WITH TRAY (MODELS CS-01 TO CS-03 & CT-01 TO CT-03) Corner Seat supports young children in a good seated position and helps them gain independent sitting. The seat is available in three height sizes: small (6 1/2 inches), medium (8 1/2 inches), large (11 inches) and comes with built in pommel and adjustable back support. Padding, seatbelts and/or chestbelts may be easily be added. Available with adjustable tray....[More Information]
   
   
6. Corner Chair and Table. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Corner chair with pommel and optional table made to give extra support and to keep a child from leaning backward. Instructions for building a chair (of chipboard or plywood) with a right-angled back and a pommel, made to fit the child. Can be built without a base. The optional table is built in the shape of half a donut to provide further support. Includes diagrams. SKILLS REQUIRED: Woodworking. AUTHOR: Hartrick, J TITLE: Equipment to Make: A Guide...[More Information]
   
   
7. FLOOR SEAT ABS plastic seat ($202) and back are vacuum-formed separately and assembled to suit child. Unit sits directly on floor, with child long-sitting. Leg abduction support wings are attached to slots in base to allow adjustment of position. Available in one size for children about one to five years of age. Can be ordered with higher back, head support, seat belt or chest belt, knee straps, toy bar, or padded seat and back covers. ABS table ($180) with chromed steel frame adjusts from 9 to 11 inches i...[More Information]
   
   
8. FLOOR SEAT AND CORNER SEAT. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Rustic aids are simple aids meant for outdoor use. Simple chairs or back rests for person sitting on the ground. Instructions for a simple floor seat or corner chair for use when sitting on the ground. Drive stakes with points into the ground side by side in a pattern of a square or triangle with a 90 degree angle. The front stakes should be lower to allow movement of the arms. Includes drawings. SKILLS REQUIRED: Assembly. AUTHOR: Caston, D. TITLE:...[More Information]
   
   
9. KANGAROO CORNER CHAIR --- CUSTOM ADAPTATION --- PURPOSE: To provide supported seating for a child with cerebral palsy, developmental disabilities, and hearing and vision impairments. Made of wood, this low-to-the-floor chair and table set enables the child to sit with correct, supported posture with her legs straight out in front of her to stretch the hamstrings. The set is adjustable and can be used for eating, reading, or play. TITLE: Playing and Growing. JOURNAL: TAD Journal. REF: Volume 25, Number 4, Summer 2005....[More Information]
   
   
10. KOALA CORNER CHAIR --- CUSTOM ADAPTATION --- PURPOSE: To provide seating and positioning for a child with microcephaly, epilepsy, and developmental disabilities. Made to dimensions specified by a therapist, this unit includes a chair with a footrest and a table that enable the child to be seated in a posturally and functionally correct position for learning, eating and playing. Made of plywood, the unit has a pedestal seat with a winged back for shoulder protraction. The seat and back panels are equipped with fabr...[More Information]
    
    
11. LADYBUG CORNER CHAIR The Ladybug Corner Chair is a corner seat designed for use by children three years old and under with neurological or mobility disabilities. This chair facilitates upright sitting and head control, offers support for straight-backed sitting, and helps protract the shoulders so that arms can come forward to function in midline. The seat back adjusts forward or backward along the seat base to enable the children to sit either in a long-leg or in a conventional sitting position. In addition, the se...[More Information]
    
    
12. MOBILE CORNER SITTER The Mobile Corner Sitter is a posture chair designed for use by children with mobility or severe physical disabilities. Designed for children ages 4 to 8 years up to 58 inches tall or smaller children ages 8 months to 4 years, up to 39 inches tall, these chairs are intended to help children develop postural control and encourage balanced weight bearing. Features include removable, adjustable head supports; a padded removable, adjustable abductor; a height- and depth-adjustable tray; swivel loc...[More Information]
    
    
13. RIFTON CORNER FLOOR SITTER (MODELS E610 & E620) The Corner Floor Sitter is a floor corner chair designed for use by children with balance, neurological, or lower extremity disabilities. Designed to provide positioning for children who need trunk support while sitting on the floor, this chair is made of laminated hardwood and has a padded, three-sided back, an adjustable hip strap, and a padded chest strap that can be placed at varying heights. Stabilizers assure a secure, non-tip base. OPTIONS: Abductor. SIZES: Model E610 is small and model E...[More Information]
    
    
14. TUMBLE FORMS 2 UNIVERSAL CORNER CHAIR (MODEL 4590U) The Tumble Forms Universal Corner Chair, model 4590U, is a corner seat positioning chair designed to fit children up through adolescence or up to 60 inches tall. The chair has a broad base to help prevent tipping due to extensor thrusting, and a built-in abductor block which supports a tray (included). The foam padded seat and back support have a hip positioning belt and height adjustable H-harness support. The seating system is covered with the colorful, washable Tumble Forms coating that is im...[More Information]
    
    
15. UNIVERSAL CORNER CHAIR The Universal Corner Chair is a positioning chair designed for use by children and adolescents up to 60 inches with upper extremity, neurological, mobility, or severe physical disabilities. This chair aids in keeping a child’s shoulders flexed to help better focus on fine motor activities. It is also helpful in maintaining leg extension and extensor thrust. Features include an abductor block, hip positioning belt, height-adjustable H-harness and removable tray with folding support that rises to ...[More Information]
    
    

Page 1 of 1