Skip navigation Return to standard layout with columns
Menu
Skip to Quick Links

Carrying Bag

Products are listed alphabetically.

Page 1 of 1

  1. 10-INCH SCOOTER BAG (MODEL 70300) The 10-inch Scooter Bag, model 70300, is a carrying bag for three-wheel scooters designed to hang from the handlebars on the tiller. This bag features a spring action hex frame opening to allow easy access to all items in the pouch. Opening the caddy requires placing the fingers in the middle of the frame and popping it open; closing the frame is achieved by pushing on the outside of the frame. Very little manual dexterity or strength is required to operate the opening. The bag is made of coated...[More Information]

  2. 13-INCH ARMREST BAG (MODEL 70320) The 13-inch Armrest Bag, model 70320, is a wheelchair side pouch designed for use on three-wheeled scooters. The caddy attaches to the arms using side release clips. This lined bag is made of coated nylon Cordura and features a spring-action hex frame opening. Opening the frame requires placing the fingers in the middle of the frame and popping it outward; closing the frame is achieved by simply pushing on the outside of the frame. Very little manual dexterity and strength are needed to operate....[More Information]

  3. 13-INCH SLING BAG The 13-inch Sling Bag, model 70040, is an underseat pocket designed to provide easy access and an unobstructed view of any items stored in this carrying bag to manual wheelchair users. The caddy is large enough to hold many daily needed items such as medicines, personals, writing instruments, paper, etc. The bag comes standard with a main compartment, pen and pencil pouch, and a small front pouch. The bag features a spring-action, hex frame opening which can be opened by placing the fingers in t...[More Information]

  4. 8-INCH BEVERAGE BAG (MODEL 70020) The 8-inch Beverage Bag, model 70020, is a caddy for attachment to wheelchairs designed to accommodate liquid containers, school or art supplies, and other items. The lined bag will holds 1 or 2 cans of soda or other drinks, sports bottles, and coffee mugs. Made of coated nylon, the caddy affixes to the wheelchair tubing with a 3-inch piece of adhesive Velcro strapping (included). The bag features a spring-action hex frame opening which can be opened by simply placing the fingers in the middle o...[More Information]

  5. 8-INCH CRUTCH BAG (MODEL 70200) The 8-inch Crutch Bag, model 70200, is a carrying bag for standard axillary crutches. The bag hangs off the crutch handle using 4-inch loops that may be unsnapped from the bag. This lined caddy is made of coated nylon and features a spring-action hex frame opening which is operated by simply placing the fingers in the middle of the frame and popping it open or pushing on the outside to close. Opening and closing of the frame does not require manual dexterity or strength. DIMENSIONS (HxWxD): 5.25...[More Information]

  6. ARM-A-REST The Arm-a-Rest is a carrying caddy designed for attachment to all wheelchairs with arm and/or back support. The pouches are fabricated of water repellant and stain resistant crushed velvet and drape over either the armrest or the back of the chair. The armrest version has a padded section which rests on top of the armrest pad; the bag storage version has a padded section which provides back support. The pouches attach with hook and loop strips. OPTIONS: A cushioned arm and storage pouch; a cushi...[More Information]

  7. BACKPACK LUMBAR SUPPORT With the Backpack Lumbar Support, students can carry heavy backpacks with more safely. The adjustable air chamber rests on the lumbosacral area, transferring weight to the hips and reducing force on the neck, back and shoulders. Improved weight distribution helps to correct posture and prevent back strain and injury to growing bodies. Simply adjust the size of support to desired comfort level with the attached air pump. The Backpack Lumbar Support is a universal lumbar support that uses a quick ...[More Information]

  8. BACKTPACK Picture of BACKTPACK The BackTpack is a carrying bag designed for use by individuals with neurological disabilities, Autism, Attention Deficit Hyperactivity Disorder (ADHD), blind and low vision or shoulder and back pain. It is adjustable and designed for children and adults ranging from ages 5 years old and above. This backpack type carrying bag is designed to load on the spinal axis to improve and train good posture, body mechanics, balance, reduce pain, and provide ease and security carrying everyday items. Featu...[More Information]

  9. CAMERA-STYLE HORIZONTAL SHOULDER BAG (MODEL 49N) Picture of CAMERA-STYLE HORIZONTAL SHOULDER BAG (MODEL 49N) The Camera-style Horizontal Shoulder Bag, model 49N, is an oxygen cylinder carrying bag designed for use by individuals with respiratory disabilities. It accommodates M6, C /M9 and B cylinder sizes. This bag has an adjustable, non-skid shoulder strap, with a handgrip for carrying by hand. The bag also has an interior accessory pocket and space for a conserving device. Made of non-flammable polyester, it is machine washable. WEIGHT: 10 ounces. COLOR: Navy. WARRANTY: One year....[More Information]

  10. CANE / CRUTCH BAG (MODEL 70220) The Cane Bag, model 70220, is a carrying bag for all single shaft canes and crutches. This lined bag is made of coated nylon and attaches with adhesive Velcro. The caddy features a spring-action hex frame opening which is opened by simply placing the fingers in the middle of the frame and popping it open, and closed by pushing on the outside of the frame. Opening and closing the bag does not require manual dexterity or strength. DIMENSIONS (WxHxD): 8 x 5.25 x 2.25 inches. COLOR: Royal blue, mage...[More Information]

  11. CARRY ALL POUCH FOR WALKER (MODEL 1116) The Carry All Pouch for Walker, model 116, is a carrying bag made of blue denim designed to attach to the side of a wheelchair or walker. The pouch has one inside pocket and 3 outside pockets with velcro closures....[More Information]

  12. CATCH-ALL (MODEL WH190) Picture of CATCH-ALL (MODEL WH190) The Catch-All WH190 is a under seat net pocket designed for individuals who spend long periods in wheelchairs. Designed for use with rigid ad folding wheelchairs, this device securely attaches with Velcro hook and loop to the bottom horizontal and rear vertical frame tubing forming a catch all net shelf under the wheelchair seat. DIMENSIONS: The widths ranges are 10, 11 to 14, 13 to 18, and 17 to 24 inches. COLOR: Black....[More Information]

  13. CONTINENTAL BACK PACK The Continental Back Pack is a wheelchair back pouch designed to attach to the chair's handgrips with straps. An inner pocket has a top zipper closure, or a flap with a velcro closure. One large and two small outer pockets are included for access to smaller items. DIMENSIONS: 16 x 16 inches. COLOR: Black or saddle vinyl....[More Information]

  14. EIGHT-TEN PAC (MODEL WH810) Picture of EIGHT-TEN PAC (MODEL WH810) The Eight-Ten Pac is an under seat pocket carrying accessory designed for use by individuals who spend long periods of time in a wheelchair. This carrying aid attaches to the frame of wheelchairs and hangs under the seat behind the user's legs. Features include SR-ADST Side Release Adapt A Straps system for quick attachment and detachment, and a large circular custom pull ring for easy detection and opening. This bag is made in the USA of highly durable nylon fabric with nylon tape bonded seams....[More Information]

  15. FLAT PAC (MODEL WH180) Picture of FLAT PAC (MODEL WH180) The Flat Pac WH180 is a under seat pocket designed for use by individuals who spend long periods of time in wheelchairs. This seat pocket permanently attaches to the underside of a wheelchair seat with Velcro where it is hidden for added security. The seam is stitched down the center of the bag so the chair can be folded without articles getting in the way. The Flat Pac has a pocket for keys and a double zip closure with large pull rings. DIMENSIONS (WxD): 14 x 11 inches....[More Information]

  16. KEEPABOUTS CARRYBAG Picture of KEEPABOUTS CARRYBAG The Keepabouts Carrybag is a carrying bag for walker designed for individuals with walking disabilities. The bag is intended for use as a bag that attaches to a walker and as a tote bag that can be carried by hand or over the shoulder. It attaches to a walker using a rectangular piece of fabric with Velcro on each end that is attached at the center to the top of one of the handles of the bag; the closure can be wrapped around a section of the walker frame and closed using Velcro to attach one or...[More Information]

  17. LIBERTYBELT Picture of LIBERTYBELT The Libertybelt is a carrying bag designed for use by individuals with balance, mobility, or walking disabilities or senior. Made of cotton duck or waterproof nylon, both with a water-resistant nylon lining, this personal organiozer is worn around the waist to keep items available. The inner bag features a double pocket which accommodates a standard checkbook, phone, note pad and pen, or TV remote. A built-in key clasp has an easy-to-use metal release to keep keys close and secure. Two exterior ...[More Information]

  18. MULEPACK (MODEL 7012) & MULEPACK II (MODEL 7013) The Mulepacks are wheelchair back pouches designed to carry things for the person in a wheelchair. Each caddy is made of heavy urethane coated Nylon pack cloth with a strong poly webbing for the straps and 2-way zippers with steel rings for good grip when opening or closing. The Mulepack II (7012) has a main storage area with a wallet and key pouch and large envelope pocket. The Mulepack I has a main storage area and one front envelope pocket. The packs will fit wheelchairs with or without push ...[More Information]

  19. PRODIGI TABLET DELUXE CARRYING CASE The Prodigi Tablet Deluxe Carrying Case is a leather carrying case for the Prodigi Tablet, a powerful, lightweight 5" HD magnifier with touch screen designed for individuals with low vision. Prodigi Tablet Deluxe Carrying Case includes a belt clip....[More Information]

  20. SIDE ENTRY BACKPACK FOR SCOOTERS (MODEL 70340) The Side Entry Backpack for Scooters, model 70340, is a wheelchair back pouch designed to allow scooter users facilitated access to items in the caddy by means of a side opening rather than a top opening. The pouch includes a main compartment, kangaroo pouch, pen and pencil pouch, and front flap pouch. It attaches with adjustable straps or may be bolted to the seat back. The bag is made of 1000 Denier coated nylon Cordura. DIMENSIONS (HxWxD): 20 x 15 x 6 inches. COLOR: Royal blue, magenta, teal,...[More Information]

  21. SIDE ENTRY BACKPACK FOR WHEELCHAIRS (MODEL 70060) The Side Entry Backpack, model 70060, is a wheelchair backpouch designed to eliminate the contortions necessary to open a standard zipper-style backpack or flap pouch from the chair. This backpack is accessed by opening the hex frame from the side. The caddy includes a main compartment, kangaroo pouch, pen and pencil pouch, and a front flap pouch. The bag is made of 1000 Denier coated nylon Cordura and attaches with 3/4-inch webbing with adjustable glides. OPTIONS: Backpack strap retainers avail...[More Information]

  22. WALKER TOTE (MODEL ST119) The Walker Tote, model ST119, is a carrying bag designed for use with a walker by individuals with walking disabilities. This bag is made to provide easy on/off handling with adjustable velcro straps and a velcro closing. It is made from medium weight canvas. OPTIONS: Silk screening with a logo or message is available in a variety of colors. DIMENSIONS: 8 x 12 inches with a 3.5 inch gusseted bottom. COLORS: Body colors are natural, red, navy, royal, green and black. Assorted webbing and trim col...[More Information]

  23. WALLET MODIFICATION -------- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted wallet modification for individuals with a variety of physical disabilities including but not limited to: inability to use one hand; sight/depth perception disabilities; limited dexterity; spasms and tremors; or mobility disabilities. The concept was to create a wallet that can be easily manipulated with only one hand, has no small parts, is accessible to an individual sitting who is sitting down, and is designed to be ...[More Information]

  24. WHEELCHAIR BAG (MODEL B2925) The WheelChair Bag, model B2925, is a canvas bag with a front pocket and a velcro closure strap. COLORS: Assorted....[More Information]

  25. WHEELCHAIR BAG (MODELS ST130A, ST130B & ST130C) The Wheelchair Bag, models ST130A, ST130B & ST130C, is a carrying bag designed for use by individuals with physical disabilities. The bag can be easily put on the arm of a wheelchair or the front of a walker. o a walker, and is made from medium weight canvas. Model ST130A has a side pocket. Model ST130B is the same as ST130A but has no pocket. Model ST130C has no pocket but is equipped with velcro straps. OPTIONS: Silk screening with a logo or message is available in a variety of colors. DIMENSI...[More Information]

  26. WHEELCHAIR DAY PAC (MODEL WDP12) The Wheelchair Day Pac, model WDP12, is a wheelchair back pouch carrying accessory. Made in the USA of highly durable nylon fabrics with nylon tape bonded seams, this bag attaches to fit any chair with its Slipstrap System. Two pull rings allow for easy opening. DIMENSIONS: 12 x 12 x 4 inches. WARRANTY: Repair or replacement guarantee....[More Information]

  27. WHEELCHAIR SIDE TOTE (MODEL PT508) The Wheelchair Side Tote, model PT508, is a carrying bag designed for attaching to a wheelchair for individuals with physical disabilities. This bag provides easy on/off handling and is equipped with adjustable velcro top straps. It is made from medium weight canvas. OPTIONS: Silk screening with a logo or message is available in a variety of colors. DIMENSIONS: 6.5 x 14 inches. COLORS: Body colors are natural, red, navy, royal, green and black. Assorted webbing and trim colors are available....[More Information]

Page 1 of 1

View discontinued Products (21)

AbleData, 103 W. Broad Street, Suite 400, Falls Church, VA 22046. 1-800-227-0216. Se habla español.
Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
by New Editions Consulting under Contract No. ED-OSE-13-C-0064.

The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor New Editions Consulting has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and New Editions Consulting make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or New Editions Consulting.